Mechanical properties and thermal analysis of low‐density polyethylene + polypropylene blends with dialkyl peroxide

Polypropylene + low density polyethylene (PP + LDPE) blends involving 0, 25, 50, 75 and 100 wt% of PP with dialkyl peroxide (DAP) were prepared by melt blending in a single‐screw extruder. The effects of adding dialkyl peroxide on mechanical and thermal properties of PP + LDPE blends have been studied. It was found that at lower concentrations of peroxide (e.g., 0–0.08 wt% of dialkyl peroxide) LDPE component is cross‐linked and Polypropylene (PP) is degraded in all compositions of PP + LDPE blends. Mechanical properties (Tensile strength at break, at yield and elongation at break), Melt flow index (MFI), hardness, Scanning Electron Microscope (SEM) and thermal analyses (DSC) of these blends were examined. Because of serious degradation or cross‐linking the mechanical properties and the crystallinty (%) of those products were decreased as a result of increasing peroxide content. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermal,physico‐mechanical,and morphological properties of HDPE graft‐copolymerized with polystyrene

In this study, polystyrene was graft‐copolymerized onto high‐density polyethylene (HDPE) by in situ polymerization of styrene monomer to change the physico‐mechanical and thermal properties of HDPE. The grafting was carried out in a Brabender‐type static mixer by injecting styrene monomer directly into the molten HDPE in the presence of a free‐radical initiator (lauroyl peroxide or LP). The effect of wt% of styrene and initiator concentrations on thermal, physico‐mechanical, and morphological properties of HDPE was investigated. The neat and modified HDPE was characterized by differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and also by tensile strength and contact angle measurements. It was found that the increase in wt% of styrene and LP dosage reduced elongation at break, hygroscopic expansion and also the melting, and the crystallization temperatures of HDPE but increased its tensile strength. The tensile strength was increased from 14.6 MPa for the neat HDPE to 20.6 MPA for the 10 wt% of styrene grafted onto HDPE using 0.8% LP. Scanning electron microscopy results show that there was no phase separation, and the grafted polystyrene became integral part of HDPE. The results demonstrate that styrene could be used in melt compounding to improve various properties of HDPE. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of polystyrene‐b‐poly(ethylene/propylene)‐b‐polystyrene compatibilizer on the recycled polypropylene and recycled high‐impact polystyrene blends

The recycled polypropylene/recycled high‐impact polystyrene (R‐PP/R‐HIPS) blends were melt extruded by twin‐screw extruder and produced by injection molding machine. The effects of polystyrene‐b‐poly(ethylene/propylene)‐b‐polystyrene copolymer (SEPS) used as compatibilizer on the mechanical properties, morphology, melt flow index, equilibrium torque, and glass transition temperature (T_g) of the blends were investigated. It was found that the notch impact strength and the elongation at break of the R‐PP/R‐HIPS blends with the addition of 10 wt% SEPS were 6.46 kJ/m² and 31.96%, which were significantly improved by 162.46% and 57.06%, respectively, than that of the uncompatibilized blends. Moreover, the addition of SEPS had a negligible effect on the tensile strength of the R‐PP/R‐HIPS blends. Additionally, the morphology of the blends demonstrated improved distribution and decreased size of the dispersed R‐HIPS phase with increasing the SEPS content. The increase of the melt flow index and the equilibrium torque indicated that the viscosity of the blends increased when the SEPS was incorporated into the R‐PP/R‐HIPS blends. The dynamic mechanical properties test showed that when the content of SEPS was 10 wt%, the difference of T_g decreased from 91.72°C to 81.51°C. The results obtained by differential scanning calorimetry were similar to those measured by dynamic mechanical properties, indicating an improved compatibility of the blends with the addition of SEPS.     

Effect of nano‐polystyrene (nPS) on thermal,rheological, and mechanical properties of polypropylene (PP)

Polystyrene nanoparticles (nPS) in the range of 10–100 nm with spherical shape were synthesized by oil/water (o/w) microemulsion process. In this process ammonium persulfate (APS) as an initiator, sodium dodecyl sulphate as a surfactant and n‐pentanol as cosurfactant were used. Isolated nPS was characterized by FTIR and ¹H NMR spectroscopy. DSC studies of nPS showed higher T_g as compared to bulk PS. The effect of lower weight percentage (wt%) of nPS on the mechanical, rheological, and thermal properties of PP was investigated. The blends were prepared individually on brabender plastograph by incorporating nPS of ～60 nm with different wt% of loading (i.e., 0.10–0.5%). It was shown from the experimental results that thermal, rheological, and mechanical properties were increased as the polymer particles blended with PP. Blends with 0.25 wt% loading of nPS exhibit better properties compared with that of other wt% loadings. The improvements in properties were due to the close packing of PP chains as recorded by improvement in crystallinity of PP with the addition of nPS as shown by SEM. Copyright © 2010 John Wiley & Sons, Ltd.     

Binary and ternary blends of high‐density polyethylene with poly(ethylene terephthalate) and polystyrene based on recycled materials

Binary blends of recycled high‐density polyethylene (R‐HDPE) with poly(ethylene terephthalate) (R‐PET) and recycled polystyrene (R‐PS), as well as the ternary blends, i.e. R‐HDPE/R‐PET/R‐PS, with varying amounts of the constituents were prepared by twin screw extruder. The mechanical, rheological, thermal, and scanning electron microscopy (SEM) analyses were utilized to characterize the samples. The results revealed that both R‐HDPE/R‐PET and R‐HDPE/R‐PS blends show phase inversion but at different compositions. The R‐PET was found to have much higher influence on the properties enhancement of the R‐HDPE compared to R‐PS, but at the phase inverted situation, a significant loss in the tensile strength of R‐HDPE/R‐PET blend was observed due to the weak interaction at this morphological state. However, the ternary blends with higher loading of second phase, namely greater than 50 wt% of R‐PET+R‐PS, demonstrated better mechanical properties than the binary blends with the same content of either R‐PET or R‐PS. Copyright © 2009 John Wiley & Sons, Ltd.     

The influence of CaCO3 filler component on thermal decomposition process of PP/LDPE/DAP ternary blend

Polypropylene‐low density polyethylene (PP‐LDPE) blends involving PP‐LDPE (90/10 wt%.) with (0.06 wt%) dialkyl peroxide (DAP) and different amounts (5, 10, 20 wt%) of calcium carbonate (CaCO₃) were prepared by melt‐blending with a single‐screw extruder. The effect of addition of CaCO₃ on thermal decomposition process and kinetic parameters, such as activation energy and pre‐exponential factor of PP‐LDPE blend with DAP matrix, was studied. The kinetics of the thermal degradation of composites was investigated by thermogravimetric analysis in dynamic nitrogen atmosphere at different heating rates. TG curves showed that the thermal decomposition of composites occurred in one weight‐loss stage. The apparent activation energies of thermal decomposition for composites, as determined by the Tang method (TM), the Kissinger–Akahira–Sunose method (KAS), the Flynn–Wall–Ozawa method (FWO), and the Coats–Redfern (CR) method were 156.6, 156.0, 159.8, and 167.7 kJ.mol^?1 for the thermal decomposition of composite with 5 wt% CaCO₃, 191.5, 190.8, 193.1, and 196.8 kJ.mol^?1 for the thermal decomposition of composite with 10 wt% CaCO₃, and 206.3, 206.1, 207.5, and 203.8 kJ mol^?1 for the thermal decomposition of composite with 20 wt% CaCO₃, respectively. The most likely decomposition process for weight‐loss stages of composites with CaCO₃ content 5 and 10 wt% was an A_n sigmoidal type. However, the most likely decomposition process for composite with CaCO₃ content 20 wt% was an R_n contracted geometry shape type in terms of the CR and master plots results. It was also found that the thermal stability, activation energy, and thermal decomposition process were changed with the increase in the CaCO₃ filler weight in composite structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Blends of poly(3‐hydroxybutyrate)/4,4′‐thiodiphenol and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ 4,4′‐thiodiphenol: Specific interaction and properties

The specific interaction between poly(3‐hydroxybutyrate) [P(3HB)] and 4,4′‐thiodiphenol (TDP) and between poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) and TDP was investigated by Fourier transform infrared (FTIR) spectroscopy. Interassociated hydrogen bonds were found between the polyester chains and the TDP molecules in the binary blends. The fractions of associated carbonyl groups, F_b 's, in the blends first increased and then decreased as the TDP content increased. The thermal and dynamic mechanical properties of P(3HB)–TDP and PHBV–TDP blends were investigated by differential scanning calorimetry and dynamic mechanical thermal analysis, respectively. Thermal analysis revealed that the P(3HB)–TDP blends possessed eutectic phase behavior. Furthermore, it was found that the thermal and dynamic mechanical properties of P(3HB) and PHBV were greatly modified through blending with TDP. Environmental degradability in river water was evaluated by a biochemical oxygen demand tester, and it was clarified that TDP lowered the degradation rate of P(3HB). The results suggest that TDP is effective in modifying the physical properties as well as the biodegradability of polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2891–2900, 2000     

Effect of Structure of Functionalizing Molecules on the Inter‐Macromolecular Reactions and Blending of Poly(ethylene‐co‐propylene) (EPM) with Poly(6‐aminohexanoic Acid) (PA6)

Two different functionalizing systems, i.e., monohexadecyl maleate (= hexadecyl hydrogen (2Z)‐but‐2‐enedioate) in the presence of dicumyl peroxide (= bis(1‐methyl‐1‐phenylethyl) peroxide) or 4‐carboxybenzenesulfonazide (= 4‐(azidosulfonyl)benzoic acid), were used in distinct experiments to perform in a one‐step procedure the formation of a EPM–PA6 graft copolymer, necessary to obtain a compatibilized blend, from a molten mixture of ethylene–propylene copolymer (EPM) and polyamide 6 (PA6). The characterization of the graft polymer by selective solvent extraction of the blends and the subsequent IR and NMR analysis of the various fractions established the occurrence of functionalization reactions preferentially onto the polyolefin with both reagents. Also the formation in good yield of graft copolymers at the phases interface was observed. Moreover, the morphology and thermal characterizations of the blends by means of SEM and DSC analyses were used to evaluate the compatibilization extent in comparison with blends obtained by the conventional two‐step procedure or by the one‐step procedure with commercial maleic acid derivatives.     

Enhancing crystallization behavior for optimized performances of poly(TMC‐b‐(LLA‐ran‐GA)) by PDLA/PLLA stereocomplex crystallization

The blends of poly(1,3‐trimethylene carbonate‐b‐(l ‐lactide‐ran‐glycolide)) (PTLG) with poly(d ‐lactide) (PDLA) were prepared via solution‐casting method using CH₂Cl₂ as solvent. The poly(l ‐lactide) (PLLA) segments of PTLG with PDLA chain constructed as stereocomplex structures and growth stereocomplex crystals of PLA (sc‐PLA). The effects of sc‐PLA crystals on thermal behavior, mechanical properties, thermal decomposition of the PTLG/PDLA blends were investigated, respectively. The differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction (WAXD) results showed that the total crystallinity of the PTLG/PDLA blends was increased with the PDLA content increasing. Heterogeneous nucleation of sc‐PLA crystals induced crystallization of the PLLA segments in PTLG. The crystallization temperature of samples shifted to 107.5°C for the PTLG/PDLA‐20 blends compared with that of the PTLG matrix, and decreased the half‐time of crystallization. The mechanical measurement results indicated that the tensile strength of the PTLG/PDLA blends was improved from 21.1 MPa of the PTLG matrix to 39.5 MPa of PTLG/PDLA‐20 blends. The results of kinetics of thermal decomposition of the PTLG/PDLA blends by TGA showed that the apparent activation energy of the PTLG/PDLA blends was increased from 59.1 to 72.1 kJ/mol with the increasing of the PDLA content from 3 wt% to 20 wt%, which indicated the enhancement of thermal stability of the PTLG/PDLA blends by addition of PDLA. Furthermore, the biocompatibility of the PTLG/PDLA blends cultured with human adipose‐derived stem cells was evaluated by CCK‐8 and live/dead staining. The experiment results proved the PTLG/PDLA blends were a kind of biomaterial with excellent physical performances with very low cytotoxicity.     

Theoretical studies of spin state‐specific [2 + 2] and [5 + 2] photocycloaddition reactions of n‐(1‐penten‐5‐yl)maleimide

N‐alkenyl maleimides are found to exhibit spin state‐specific chemoselectivities for [2 + 2] and [5 + 2] photocycloadditions; but, reaction mechanism is still unclear. In this work, we have used high‐level electronic structure methods (DFT, CASSCF, and CASPT2) to explore [2 + 2] and [5 + 2] photocycloaddition reaction paths of an N‐alkenyl maleimide in the S₁ and T₁ states as well as relevant photophysical processes. It is found that in the S₁ state [5 + 2] photocycloaddition reaction is barrierless and thus overwhelmingly dominant; [2 + 2] photocycloaddition reaction is unimportant because of its large barrier. On the contrary, in the T₁ state [2 + 2] photocycloaddition reaction is much more favorable than [5 + 2] photocyclo‐addition reaction. Mechanistically, both S₁ [5 + 2] and T₁ [2 + 2] photocycloaddition reactions occur in a stepwise, nonadiabatic means. In the S₁ [5 + 2] reaction, the secondary C atom of the ethenyl moiety first attacks the N atom of the maleimide moiety forming an S₁ intermediate, which then decays to the S₀ state as a result of an S₁ → S₀ internal conversion. In the T₁ [2 + 2] reaction, the terminal C atom of the ethenyl moiety first attacks the C atom of the maleimide moiety, followed by a T₁ → S₀ intersystem crossing process to the S₀ state. In the S₀ state, the second C C bond is formed. Our present computational results not only rationalize available experiments but also provide new mechanistic insights. © 2017 Wiley Periodicals, Inc.     

Effect of novel compatibilizers on the properties and morphology of PP/PC blends

A series of compatibilizers, including polypropylene (PP) grafted with 2‐tertbutyl‐6‐(3‐tertbutyl‐ 2‐hydroxy‐5‐methylbenzyl)‐4‐methylphenyl acrylic ester (BPA), glycidyl methacrylate (GMA), GMA/styrene (GMA‐st), and 2‐allyl bisphenol A (2A) were investigated for the purpose of improving the compatibility of PP/polycarbonate (PC) blends. PP‐g‐BPA shows a remarkable compatibilizing effect on PP/PC blends since it has similar group‐benzene ring with PC, and it is a sort of heat‐resistant antioxidant in the meantime, which can reduce the molecular degradation of PP during grafting and blending under high temperatures. Its compatibilizing effect was examined in terms of the mechanical, thermal properties, and morphologies. PP/PC blends show a decreasing and much more homogeneous size of dispersed PC particles through addition of a small amount of PP‐g‐BPA, and dynamic mechanical analysis (DMA) reveals a noticeable approach of T_g between PP and PC, indicating the improvement of the compatibility of PP/PC blends. Furthermore, styrene‐ethylene‐butylene‐styrene (SEBS) as a toughening rubber and a compatibilizer was applied to PP/PC blends. Around 25 wt% SEBS and 20 wt% PC lead to high toughness and strength of PP. Copyright © 2008 John Wiley & Sons, Ltd.     

Well‐defined PE‐b‐PDMS diblock copolymers via the combination of thiol‐ene click and esterification reactions: Facile synthesis and compatibilization for HDPE/silicone oil blends

Well‐defined diblock copolymers of linear polyethylene (PE) and poly(dimethylsiloxane) (PDMS) have been synthesized through a facile route combining the thiol‐ene click chemistry of vinyl‐terminated polyethylene (PE‐ene) and the sequential esterification reaction. The resulting diblock copolymers are characterized by ¹H NMR, FT‐IR, DSC, TGA, and TEM. In addition, the PE‐b‐PDMS diblock copolymers have been evaluated as compatibilizers in the blends of high‐density polyethylene (HDPE) and silicone oil. The morphological analysis and mechanical properties demonstrate that the compatibilized blends with low loading concentration of PE‐b‐PDMS display significant improvements in modulus of elasticity and elongation at break as compared to the uncompatibilized binary blends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3205–3212     

Reactive melt blends of thermoplastic polyolefins,MAH‐g‐PP and nylon 6

Reactive melt blends of an ethylene‐propylene‐diene terpolymer (EPDM) based thermoplastic elastomer (TPE), maleic anhydride grafted polypropylene (MAH‐g‐PP), and nylon 6 were prepared in a single screw extruder and evaluated in terms of morphological, rheological, thermal, dynamic mechanical, and mechanical properties of the blends. It was found that MAH‐g‐PP‐co‐nylon 6 copolymers were in situ formed and acted as effective compatibilizers for polypropylene (PP) and nylon 6. Phase separation of PP and EPDM in TPE increased with the addition and increasing amount of MAH‐g‐PP and nylon 6, leading to decreased glass transition temperature (T_g) of TPE and increased crystalline melting temperature (T_m) of PP. Copyright © 2004 John Wiley & Sons, Ltd.     

Effects of a semi‐bio‐based triazine derivative on intumescent flame‐retardant polypropylene

A semi‐bio‐based synergist (N, N′, N″‐1, 3, 5‐triazine‐2, 4, 6‐triyltris‐glycine [TTG]) was prepared by using glycine and cyanuric chloride. The structure of TTG was characterized by ¹H NMR and Fourier transform infrared spectroscopy. The TTG was applied in polypropylene (PP)/intumescent flame‐retardant compounds to improve its flame retardancy. The flame‐retardant properties of PP compounds were evaluated by limiting oxygen index and vertical burning tests (UL‐94). The results showed that 17 wt% intumescent flame‐retardant and 1 wt% TTG makes PP achieve the UL‐94 V‐0 rating without drippings, and the limiting oxygen index value is increased to 29.5 vol%. The thermal degradation behavior and char morphology of PP compounds were investigated by thermogravimetric analysis and scanning electron microscopy. The results indicated that TTG accelerates the formation of char layer, regulates the porous structure of char layer, and enhances its barrier property. Therefore, the temperatures of PP compound after two ignitions during the UL‐94 test are decreased significantly as shown in infrared thermal imaging. In addition, the combustion characteristics of PP compounds were investigated by cone calorimeter. The peak of heat release rate (PHRR) of PP compound is 67% reduced, and the t_PHRR is delayed from 223 to 430 seconds, indicates that the combustion risk of PP compound is reduced.     

Kinetic Evaluation of Hyperbranched A2 + B3 Polycondensation Reactions

The kinetics of hyperbranched A₂ + B₃ systems is discussed theoretically with respect to the development of the 7 different structural units, the degree of branching, DB, and the monomer sequences considering the adjacent groups of a structural unit. For A₂ + B₃ systems, the comonomer ratio, the relative rate constants and the process conditions have an influence on the resulting structure as shown by numerical simulations. With increasing A:B ratios f_A/B, the degree of branching will be increased. Also the relative reaction rate constants have a strong impact on the distribution of structural units, especially when the reaction rate constants for the pathway of the B₃ monomer are changed. On the other hand, differences in the reaction rate constants for the pathway of the A₂ monomer do not have any influence on the degree of branching. The simulation indicates that slow addition of either both monomers or just the B₃ monomer has the strongest effect on the resulting DB. In all cases, the conversion is a critical issue to obtain high molecular weight products.

Degree of branching (DB) versus conversion of A‐functionalities (p_A) for various monomer compositions.     

Polyamide 66/EPR‐g‐MA blends: mechanical modeling and kinetic analysis of thermal degradation

The present investigation deals with the mechanical, thermal, and morphological properties of binary nylon 66/maleic anhydride grafted ethylene propylene rubber (EPR‐g‐MA) blends at different dispersed phase (EPR‐g‐MA) concentrations. The effects of EPR‐g‐MA concentration and dispersed particle size on the mechanical properties of the blends were studied. Analysis of the tensile data in terms of various theoretical models revealed the variation of stress concentration effect with blend composition and the improvement of interfacial adhesion between dispersed rubber phase and nylon 66 matrix. The thermal degradation of the blends was analyzed by nonisothermal thermogravimetric analysis (TGA). It was found that the activation energy (E_a) and overall reaction order of thermal degradation decreased with increasing EPR‐g‐MA content. The scanning electron microscopic (SEM) analysis showed a significant decrease in dispersed particle size with increasing EPR‐g‐MA content, which was explained on the basis of the level of chemical interaction (in situ compatibilization) between nylon 66 and EPR‐g‐MA. The surface morphology of the nylon 66/EPR‐g‐MA blends was illustrated by the roughness of atomic force microscopy (AFM) images. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis,Characterization, and DNA‐Binding Properties of the Chiral Ruthenium(II) Complexes Δ‐ and Λ‐[Ru(bpy)2(dmppd)]2+ (dmppd = 10,12‐Dimethylpteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione; bpy = 2,2′‐Bipyridine)

Two novel chiral ruthenium(II) complexes, Δ‐[Ru(bpy)₂(dmppd)]²⁺ and Λ‐[Ru(bpy)₂(dmppd)]²⁺ (dmppd = 10,12‐dimethylpteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione, bpy = 2,2′‐bipyridine), were synthesized and characterized by elemental analysis, ¹H‐NMR and ES‐MS. The DNA‐binding behaviors of both complexes were studied by UV/VIS absorption titration, competitive binding experiments, viscosity measurements, thermal DNA denaturation, and circular‐dichroism spectra. The results indicate that both chiral complexes bind to calf‐thymus DNA in an intercalative mode, and the Δ enantiomer shows larger DNA affinity than the Λ enantiomer does. Theoretical‐calculation studies for the DNA‐binding behaviors of these complexes were carried out by the density‐functional‐theory method. The mechanism involved in the regulating and controlling of the DNA‐binding abilities of the complexes was further explored by the comparative studies of [Ru(bpy)₂(dmppd)]²⁺ and of its parent complex [Ru(bpy)₂(ppd)]²⁺ (ppd = pteridino[6,7‐f] [1,10]phenanthroline‐11,13 (10H,12H)‐dione).     

Thermo‐oxidative degradation of HDPE as a function of its crystalline content

The composition, the thermal properties, and the kinetics of the thermo‐oxidative degradation of high‐density polyethylene (HDPE) were studied as a function of the increasing crystalline fraction, which resulted from the selective extraction of the amorphous part, through digestion by immersion in fuming nitric acid (HNO₃) for different periods of time. The chemical and thermodynamic changes in HDPE, brought about by digestion in nitric acid for different periods of time, are discussed. Changes in the chemistry and microstructure of the HDPE, as a function of acid treatment for different periods of time, were studied using infra‐red spectroscopy (FTIR), gel permeation chromatography (GPC), and thermal analysis (DSC and TGA), as well as scanning electron microscopy (SEM). These studies were carried out as a function of the extracted amorphous fraction of HDPE samples via digestion in HNO₃. These studies showed that in the first stages of the acid chemical attack, the amorphous part first undergoes a chemical modification and then dissolves into the strong acid medium. The total crystalline fraction apparently decreases during the first stages of the chemical attack and then increases as the amorphous part is extracted. TGA results show that as the selective extraction of the amorphous part occurs, there is a displacement of the thermo‐oxidative degradation toward higher temperatures. The kinetics of the thermo‐oxidative degradation as a function of the extraction of the amorphous part was followed according to the Horowitz‐Metzger method, and it was found that as the concentration of the crystalline fraction increases, the activation energy for the thermo‐oxidative degradation increases. SEM studies show that the extraction of the amorphous part does not affect the size of the crystalline lamellar thickness of HDPE. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1906–1915, 2009     

Effect of PEO‐PPO‐PEO copolymer on the mechanical and thermal properties and morphological behavior of biodegradable poly (L‐lactic acid) (PLLA) and poly (butylene succinate‐co‐L‐lactate) (PBSL) blends

A blend of two biodegradable and semi‐crystalline polymers, poly (L‐lactic acid) (PLLA; 70 wt%) and poly (butylene succinate‐co‐L‐lactate) (PBSL; 30 wt%), was prepared in the presence of various polyethylene oxide‐polypropylene oxide‐polyethylene oxide (PEO‐PPO‐PEO) triblock copolymer contents (0.5, 1, 2 wt%). Mechanical, thermal properties, and Fourier transform infrared (FTIR) analysis of the blends were investigated. It was found that the addition of copolymer to PLLA/PBSL improved the fracture toughness of the blends as shown by mode I fracture energies. It was supported by morphological analysis where the brittle deformation behavior of PLLA changed to ductile deformation with the presence of elongated fibril structure in the blend with copolymer system. The glass transition temperature (T_g), melting temperature (T_m) of PLLA, and PBSL shift‐closed together indicated that some compatibility exists in the blends. In short, PEO‐PPO‐PEO could be used as compatibilizer to improve the toughness and compatibility of the PLLA/PBSL blends. Copyright © 2010 John Wiley & Sons, Ltd.     

Influence of extender oil composition on flowing property,thermal stability,and morphology of styrene‐b‐ethylene‐co‐butylene‐b‐styrene copolymer/polypropylene/oil blends

In this study, a series of styrene‐b‐ethylene‐co‐butylene‐b‐styrene copolymer (SEBS)/polypropylene (PP)/oil blends with different kinds of oil composition was developed through melt blending. The effect of oil with different composition and properties on its phase equilibrium and “redistribution” in multiphasic SEBS elastomer was systematically studied for the first time. Moreover, an integral influencing mechanism of oil composition on the structure and properties of SEBS/PP/oil blends was also put forward. The mineral oil was mainly distributed in ethylene/butylene (EB)/PP phase, which greatly enhanced the processing flowability of SEBS/PP/oil blends. With increasing oil C_N content, a redistribution of oil appeared and excess naphthenic oil (NO) entered the interphase of soft and hard phases. The dynamic mechanical thermal analysis (DMTA) analysis indicated that the polystyrene (PS) phase was plasticized, which also helped to improve the processing fluidity of blends. However, the plasticizing of physical cross‐linking point PS resulted in a decrease in mechanical strength and thermal stability. Small‐angle X‐ray scattering (SAXS) and transmission electron microscope (TEM) results showed that PS phase (45 nm to 55 nm) cylindrically distributed in EB/PP/oil matrix, the excess NO in the interphase enlarged the distance between PS phase and widen the escape channel for oil migration. At over 45% oil C_N content, the electron density difference between soft and hard phases reduced to the minimum, same as T_gPS, indicating a deeper plasticizing effect. The PS phase swelled and exhibited elastic behavior; thus, the force could be uniformly transferred between two phases. Importantly, a recover in strength and thermal stability was observed in O‐5 blend. This work significantly filled the gap of studies in oil‐extended thermoplastic elastomers (TPEs), exhibiting great theoretical guiding significance and application value.