稻秆焦炭热解和CO2气化过程中碱金属和碱土金属的迁移

研究了稻秆焦炭中碱金属与碱土金属（AAEMs）在N₂热解和CO₂气化气氛下的迁移过程。通过对不同热处理时间的固相样品分析,得到了两种气氛下AAEMs的迁移规律,并讨论了CO₂气化气氛对AAEMs迁移的影响机理。在两种气氛下,K的释放比例都随热处理时间延长先快速增加,然后缓慢增加,而Ca和Mg的释放比例都很低。气化前期K的释放比例高于热解,气化后期K的释放比例与热解几乎相同。热解时,焦炭中酸溶K和Ca的比例先降低然后维持稳定,而酸溶Mg的比例几乎不变。气化时,酸溶K的比例先缓慢降低,然后迅速降低;酸溶Ca和Mg的比例则先增加后迅速降低。气化前期,酸溶AAEMs的比例要高于热解相同时间的焦炭样品;气化后期,酸溶AAEMs的比例则明显低于热解焦炭样品。CO₂通过与焦炭有机结构反应,促进了char-K的释放,提高了K的释放比例,也促进了难溶的有机结合的AAEMs分解为酸溶AAEMs;在焦炭气化后期,焦炭中的Si会与AAEMs反应生成难溶硅酸盐。     

Synthese und Kristallstruktur von Alkalimetalldiamidodioxosilicaten M2SiO2(NH2)2 mit M ≙ K,Rb und Cs

Synthesis and Crystal Structure of Alkali Metal Diamido Dioxosilicates M₂SiO₂(NH₂)₂ with M ? K, Rb and Cs SiO₂ – α-quartz – reacts with alkali metal amides MNH₂ (M ? K, Rb, and Cs) in molar ratios from 1:2 to 1:10 at 450°C ≤ T ≤ 600°C and P(NH₃) = 6 kbar in autoclaves to diamidodioxosilicates M[SiO₂(NH₂)₂]. Crystals of the colourless compounds which hydrolyze rapidly were investigated by x-ray methods. Following data characterize the structure determination on the isotypic compounds: The structures of the diamidodioxosilicates are closely related to the β? K₂SO₄ type. They contain isolated [SiO₂(NH₂)₂]^2? ions. K⁺ ions and hydrogen bridge bonds N? H…?O (with 2.68 Å ≤ d(N…?O) ≤ 2.78 Å for the K compound) connect the tetrahedral anions.     

Hydrothermal Alteration of Andesite in Acid Solutions: Experimental Study in 0.05 M H2SO4 Solution at 110 °C

Hydrothermal experiments on an andesite have been carried out under the condition of 110 °C, autogeneous pressure, 0.05 M H₂SO₄ solution and renewal of acid solution every 6 hours. The experimental results indicate that the plagioclase and pyroxenes in the treated samples show micropits and microfractures. Small crystals readily suffered from alteration, as compared with large ones, and the susceptibility of the minerals to the acid solution is decreased in the order of plagioclase, augite, hypersthene and opaque minerals. Plagioclase, which is the most reactive mineral in the experiments, shows an increase of SiO₂, but a decrease of Al₂O₃, CaO and Na₂O as the experiments proceeded. The chemical change of the treated andesite, it indicates that the relative amounts of SiO₂, TiO₂, MgO, ΣFeO, MnO and K₂O increase, while those of Al₂O₃, CaO, Na₂O and P₂O₅ decrease with an increase of the experimental duration. The relative mobility of chemical elements listed in decreasing order is P, Ca, Al, Na, Si, K, Mg, Fe, Mn and Ti in terms of the K value. It is no wonder that Ca, Al and Na are more mobile than others because these elements are readily released into solution from the more reactive plagioclase, while Mg, Fe etc. still stay in the less reactive pyroxenes and opaque minerals.     

Calorimetric investigations of the MBr−NdBr3 melts (M=Li,Na, K,Cs)

Present work is a part of thermodynamic research program on the MX?LnX₃ system (M=alkali metal,X=Cl, Br andLn=lanthanide). Molar enthalpies of mixing in the LiBr?NdBr₃, NaBr?NdBr₃ and KBr?NdBr₃ liquid binary systems have been determined at temperature 1063 K by direct calorimetry in the whole range of composition. Investigated systems are generally characterized by negative enthalpies of mixing with minimum atX _NdBr3≈0.3–0.4. These enthalpies decrease with decrease of ionic radii of alkali metals. Molar enthalpies of solid-solid and solid-liquid phase transitions of K₃NdBr₆ and Cs₃NdBr₆ have been also determined by differential scanning calorimetry (DSC). K₃NdBr₆ is formed at 689 K from KBr and K₂NdBr₅ with enthalpy of 44.0 kJ·mol^?1 whereas Cs₃NdBr₆ is stable at ambient temperature and undergoes phase transition in the solid state at 731 K with enthalpy of 8.8 kJ·mol^?1. Enthalpies of melting have been also determined.     

Al2O3/K2O-containing non-stoichiometric lithium disilicate-based glasses

The crystallisation kinetics of experimental glasses in 3 different systems: (A) Li₂O–SiO₂, (B) Li₂O–Al₂O₃–SiO₂ and (C) Li₂O–K₂O–Al₂O₃–SiO₂ were studied under non-isothermal conditions. The DTA results revealed a stronger tendency to crystallisation of binary compositions in comparison to the ternary and quaternary compositions comprising Al₂O₃ and K₂O which present the lower crystallisation, i.e. the crystallisation propensity follows the trend A > B > C. The devitrification process in the Li₂O–SiO₂ and Li₂O–Al₂O₃–SiO₂ systems began earlier and the rate was higher in comparison to that of glasses in the quaternary Li₂O–K₂O–Al₂O₃–SiO₂ system. Thus, addition of Al₂O₃ and K₂O to glasses of Li₂O–SiO₂ system was demonstrated to promote glass stability against crystallisation. However, the activation energy for crystallisation was shown to depend also on the SiO₂/Li₂O ratio with the binary system showing a decreasing trend with increasing SiO₂/Li₂O ratio, while the opposite tendency was being observed for compositions with added Al₂O₃ and K₂O.     

Cesium and strontium exchange by the framework potassium titanium silicate K3HTi4O4(SiO4)3·4H2O

Potassium titanium silicate with a semicrystalline framework of the formula K₃HTi₄O₄(SiO₄)₃·4H₂O has been prepared under mild hydrothermal conditions and its protonic form, H₄Ti₄O₄(SiO₄)₃·8H₂O, was obtained by acid treatment of the potassium compound. A comparative ion exchange testing of the H₄Ti₄O₄(SiO₄)₃·8H₂O towards alkali and alkaline earth metals in a broad pH and concentration range was carried out. It was found that potassium titanium silicate is a moderately weak cation exchanger, possessing high ion exchange capacity (up to 4–5 meq/g) and showing preference for heavy alkali and alkaline earth metals uptake. The selectivity of K₃HTi₄O₄(SiO₄)₃·4H₂O towards Cs⁺ and Sr²⁺ ions in alkaline and acid media in the presence of competitive inorganic ions and certain organic compounds was also studied. The data obtained suggest that despite the existence of well defined tunnel structure with parameters fitting for cesium ion in the K₃HTi₄O₄(SiO₄)₃·4H₂O, potassium titanium silicate could remove cesium (and strontium) efficiently only under some specific conditions, namely, at pH close to neutral and in the absence of competitive ions and especially of organic complexing agents.     

Matrixreaktionen von SiO. IR-spektroskopischer Nachweis der Molekeln SiO2 und OSiCl2

Matrix Reactions of SiO. IR-spectroscopic Identification of the Molecules SiO₂ and OSiCl₂ SiO evaporated from Knudsen cell reacts in argon matrix with atomic oxygen generated by microwave excitation to molecular SiO₂. Bands at 1400 cm^?1 in the IR matrix spectrum are assigned to the ν₃-vibration of molecules Si¹⁶O₂, Si¹⁶O¹⁸O, and Si¹⁸O₂. In an argon matrix SiO can reach with Cl₂ by excitation of a high pressure mercury lamp to OSiCl₂. Isotopic splitting (¹⁶O/¹⁸O, ²⁸Si/²⁹Si, ³⁵Cl/³⁷Cl) and force constant calculations show that the observed frequencies can be assigned to a planar molecule OSiCl₂. The bending mode δ (SiCl₂) could not be observed. The force constant f(SiO) is 9. 10² N m^?1 for SiO₂ and OSiCl₂. According to the SIEBERT rule this valence force constant is expected for a double bond between silicon and oxygen.     

Preparation and characterisation of glass product with modified composition for vitrification of high level radioactive waste

During the vitrification of high level radioactive liquid waste (HLW) at advanced vitrification system (AVS) in Tarapur, the glass forming chemicals are introduced into the melter in the form of preformed glass frit, known as base glass. A five component system, SiO₂–B₂O₃–Na₂O–Fe₂O₃–TiO₂ is presently used as the base glass at AVS. Towards the step to product improvement, a modified base glass composition with seven components, SiO₂–B₂O₃–Na₂O–CaO–Fe₂O₃–TiO₂–K₂O was formulated with reduced boron content and incorporation of mixed alkali elements Na and K as compared to presently adopted base glass composition. The modification was mainly aimed at reducing boron volatilization during vitrification without affecting the present state of product quality to improve melter life and to some extent take advantage of mixed alkali effect. The modified base glass and product glass based on modified base composition were evaluated for different properties with respect to existing composition. The fusion and pouring temperatures were well with in the range of plant requirement. The glass transition temperature, coefficient of thermal expansion and thermal conductivity were similar or better. The product glass was having good homogeneity and chemical durability.     

The vitrification of alkali borate and alkali silicate melts

Glasses and crystals of compositions corresponding to the congruently melting compounds M₂O·2SiO₂ (M = Na. Rb, and Cs) and M₂O·4SiO₂ (M = K, Rb, and Cs) were studied by differential scanning calorimetry. The structure temperatures (T _f) and excess entropies at T _f of glasses were measured depending on the rate of cooling of the corresponding melts. The activation energies of glass formation (ΔE) and scale of cooperative motion in the transition region (ξ_a) were estimated. The totality of the data obtained were used to compare the thermodynamic (the ratio between the excess (with respect to the corresponding crystals) entropy of glass at T _f and the entropy of crystal melting), kinetic (fragility m = f(ΔE, T _f)), and microscopic (ξ_a) parameters of the vitrification of alkali silicate melts. The behaviors of alkali silicate and alkali borate melts were shown to be similar.     

Novel Catalysts for Gasification of Biomass with High Conversion Efficiency

We have developed catalysts for the gasification of biomass with much higher energy efficiency than the conventional methods (noncatalyst, dolomite, and commercial steam reforming Ni catalyst). In our investigation, the Rh/CeO₂ gave high yields of syngas for cellulose gasification using a fluidized-bed reactor with batch feeding of cellulose. However, the catalyst was deactivated because of sintering of CeO₂ during the reaction. To prevent the CeO₂ sintering, we have further improved the catalyst and found that Rh/CeO₂/SiO₂ was quite stable for the gasification of cellulose. It was demonstrated that Rh/CeO₂/SiO₂ gave almost complete gasification of real biomass (wood powder) at 873 K. These results indicate that the combination of this kind of catalyst and fluidized-bed reactor can realize the energy-efficient biomass gasification.     

Synthesen,IR- und 15N-Kernresonanzspektren isotopen-markierter Nitridokomplexe des Wolframs

Isothermal Section at 1273 K in the System Ti? Si? O The isothermal section at 1273 K of the system Ti? Si? O has been investigated by means of phase analysis in quenched samples as well as by the investigation of the phase sequence in chemical vapour transport experiments. In equilibrium with SiO₂ only TiSi₂, TiSi, and Ti₅Si₃(O), respectively, can coexist as Si-containing compounds. Only Ti₅Si₃(O) can coexist with titanium oxides (Ti₂O₃ or TiO, respectively). Ti₅Si₄ is stable only if oxygen is absent.     

Study of reactive ion etching of Si and SiO2 for CFxCl4−x gases

A parametric study of the etching of Si and SiO₂ by reactive ion etching (RIE) was carried out to gain a better understanding of the etching mechanisms. The following fluorocarbons (FCs) were used in order to study the effect of the F-to-Cl atom ratio in the parent molecule to the plasma and the etching properties: CF₄, CF₃Cl, CF₂Cl₂, and CFCl₃ (FC-14, FC-13, FC-12, and FC-11 respectively). The Si etch rate uniformity across the wafer as a function of the temperature of the wafer and the Si load, the optical emission as a function of the temperature of the load, the etch rate of SiO₂ as a function of the sheath voltage, and the mass spectra for each of the FCs were measured. The temperature of the wafer and that of the surrounding Si load strongly influence the etch rate of Si, the uniformity of etching, and the optical emission of F, Cl, and CF₂. The activation energy for the etching reaction of Si during CF₄ RIE was measured. The etch rate of Si depends more strongly on the gas composition than on the sheath voltage; it seems to be dominated by ion-assisted chemical etching. The etching of photoresist shifted from chemical etching to ion-assisted chemical etching as a function of the F-to-Cl ratio and the sheath voltage. The etch rate of SiO₂ depended more strongly on the sheath voltage than on the F-to-Cl ratio.     

Variable temperature 1H, 23Na,and 29Si MAS NMR studies on sodium silicate hydrates of composition Na2O · SiO2 · nH2O (n = 9, 6, 5): Local structure in crystals,melts, supercooled melts,and glasses

The local structure in crystals, melts, supercooled melts, and glasses of sodium silicate hydrates of composition Na₂O · SiO₂ · nH₂O (n = 9, 6, 5) is studied by variable temperature ¹H, ²³Na, and ²⁹Si MAS NMR spectroscopy. Detailed in situ investigations on the melting process of the crystalline materials reveal the importance of H₂O motion in the melting mechanism. Depending on the local coordination, crystallographically distinct Na sites show different behaviour during the melting process. Upon melting, the monomer silicate anions present in the crystalline hydrates undergo condensation reactions to oligomeric silicate anions. No recrystallization but glass formation occurs at low temperature if the melts were heated initially about 10 K above the melting point. In the glasses also oligomeric silicate anions are present with a preference for cyclotrimer species. In situ MAS NMR investigations and electric conductivity measurements of the melts, supercooled melts, and glasses suggest the distinction of three temperature ranges characterized by different local structure and dynamics of the sodium cations, water and silicate anions. These ranges comprise a glass and glass transition range A at low temperatures, an aggregation region B at intermediate temperatures, and a solution or electrolyte region C at high temperatures. In region B aggregation of sodium water complexes to hydrated polycation clusters is suggested, the dynamic behaviour of which is clearly different to that of the silicate anions, indicating that no long-lived contact ion pairs between sodium cations and silicate anions are formed.     

An X-ray photoelectron spectroscopic study of novel SiON glasses

Novel SiON glasses obtained by melting mixtures of crystalline α-SiO₂ and α-Si₃N₄ were investigated by means of X-ray photoelectron spectroscopy (XPS). The incorporation of nitrogen into the SiO₂ network was recently proved by ²⁹Si-MAS-NMR (magic-angle spinning nuclear magnetic resonance) and Si K-XANES (X-ray absorption near edge structure). The Si 2p XPS and the Si KLL XAES (X-ray excited Auger electron spectroscopy) studies of the SiON glasses confirm the formation of mixed structural units (SiO_xN_4-x) by the presence of an additional spectral component energetically located between SiO₂- and Si₃N₄-like signals. The N 1s and O 1s XPS spectra support the conclusion about the incorporation of nitrogen into the SiO₂ network.     

清液体系中T型分子筛膜的高重复性合成与渗透汽化性能

以自制微米级分子筛为晶种,在清液体系中成功合成出高性能的T型分子筛膜,考察了硅铝比、水硅比、碱度及合成温度与时间等条件对膜的生长和渗透汽化性能的影响.结果表明,在摩尔组成为1SiO₂:0.015Al₂O₃:0.41(Na₂O+K₂O):30H₂O的清液体系中,于423K晶化6h的条件下可较快地形成一层厚度为5μm的连续致密纯相T型分子筛膜,较大缩短了膜合成时间且提高了膜致密性.在优化条件下所合成的膜具有优良的分离性能和高重复性.348K时,在10wt%水-90wt%异丙醇混合物体系中膜的渗透通量和分离因子分别高达4.20kg/(m²·h)和7800.     

Darstellung,Charakterisierung und Reaktionsverhalten von Natrium‐ und Kaliumhydridosilylamiden R2(H)Si—N(M)R′ (M = Na,K) — Kristallstruktur von [(Me3C)2(H)Si—N(K)SiMe3]2·THF

Preparation, Characterization and Reaction Behaviour of Sodium and Potassium Hydridosilylamides R₂(H)Si—N(M)R′ (M = Na, K) — Crystal Structure of [(Me₃C)₂(H)Si—N(K)SiMe₃]₂ · THF The alkali metal hydridosilylamides R₂(H)Si—N(M)R′ 1a‐Na — 1d—Na and 1a‐K — 1d‐K ( a : R = Me, R′ = CMe₃; b : R = Me, R′ = SiMe₃; c : R = Me, R′ = Si(H)Me₂; d : R = CMe₃, R′= SiMe₃) have been prepared by reaction of the corresponding hydridosilylamines 1a — 1d with alkali metal M (M = Na, K) in presence of styrene or with alkali metal hydrides MH (M = Na, K). With NaNH₂ in toluene Me₂(H)Si—NHCMe₃ ( 1a ) reacted not under metalation but under nucleophilic substitution of the H(Si) atom to give Me₂(NaNH)Si—NHCMe₃ ( 5 ). In the reaction of Me₂(H)Si—NHSiMe₃ ( 1b ) with NaNH₂ intoluene a mixture of Me₂(NaNH)Si—NHSiMe₃ and Me₂(H)Si—N(Na)SiMe₃ ( 1b‐Na ) was obtained. The hydridosilylamides have been characterized spectroscopically. The spectroscopic data of these amides and of the corresponding lithium derivatives are discussed. The ²⁹Si‐NMR‐chemical shifts and the ²⁹Si—¹H coupling constants of homologous alkali metal hydridosilylamides R₂(H)Si—N(M)R′ (M = Li, Na, K) are depending on the alkali metal. With increasing of the ionic character of the M—N bond M = K > Na > Li the ²⁹Si‐NMR‐signals are shifted upfield and the ²⁹Si—¹H coupling constants except for compounds (Me₃C)(H)Si—N(M)SiMe₃ are decreased. The reaction behaviour of the amides 1a‐Na — 1c‐Na and 1a‐K — 1c‐K was investigated toward chlorotrimethylsilane in tetrahydrofuran (THF) and in n‐pentane. In THF the amides produced just like the analogous lithium amides the corresponding N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2a — 2c ) in high yields. The reaction of the sodium amides with chlorotrimethylsilane in nonpolar solvent n‐pentane produced from 1a‐Na the cyclodisilazane [Me₂Si—NCMe₃]₂ ( 8a ), from 1b‐Na and 1‐Na mixtures of cyclodisilazane [Me₂Si—NR′]₂ ( 8b , 8c ) and N‐silylation product 2b , 2c . In contrast to 1b‐Na and 1c‐Na and to the analogous lithium amides the reaction of 1b‐K and 1c‐K with chlorotrimethylsilane afforded the N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2b , 2c ) in high yields. The amide [(Me₃C)₂(H)Si—N(K)SiMe₃]₂·THF ( 9 ) crystallizes in the space group C2/c with Z = 4. The central part of the molecule is a planar four‐membered K₂N₂ ring. One potassium atom is coordinated by two nitrogen atoms and the other one by two nitrogen atoms and one oxygen atom. Furthermore K···H(Si) and K···CH₃ contacts exist in 9 . The K—N distances in the K₂N₂ ring differ marginally.     

MAS-NMR studies of lithium aluminum silicate (LAS) glasses and glass-ceramics having different Li2O/Al2O3 ratio

Emergence of phases in lithium aluminum silicate (LAS) glasses of composition (wt%) xLi₂O-71.7SiO₂-(17.7−x)Al₂O₃-4.9K₂O-3.2B₂O₃-2.5P₂O₅ (5.1≤x≤12.6) upon heat treatment were studied. ²⁹Si, ²⁷Al, ³¹P and ¹¹B MAS-NMR were employed for structural characterization of both LAS glasses and glass-ceramics. In glass samples, Al is found in tetrahedral coordination, while P exists mainly in the form of orthophosphate units. B exists as BO₃ and BO₄ units. ²⁷Al NMR spectra show no change with crystallization, ruling out the presence of any Al containing phase. Contrary to X-ray diffraction studies carried out, ¹¹B (high field 18.8 T) and ²⁹Si NMR spectra clearly indicate the unexpected crystallization of a borosilicate phase (Li,K)BSi₂O₆, whose structure is similar to the aluminosilicate virgilite. Also, lithium disilicate (Li₂Si₂O₅), lithium metasilicate (Li₂SiO₃) and quartz (SiO₂) were identified in the ²⁹Si NMR spectra of the glass-ceramics. ³¹P NMR spectra of the glass-ceramics revealed the presence of Li₃PO₄ and a mixed phase (Li,K)₃PO₄ at low alkali concentrations.     

Sm3Cl[SiO4]2: Ein chlorarmes Chloridorthosilicat des Samariums

Sm₃Cl[SiO₄]₂: A Chlorine‐poor Chloride Orthosilicate of Samarium Pale yellow, plate‐like single crystals of Sm₃Cl[SiO₄]₂ (orthorhombic, Pnma; a = 701.74(8), b = 1800.8(2), c = 626.63(7) pm; Z = 4) are obtained upon the reaction of SmCl₃, Sm₂O₃ and SiO₂ (”︁Kieselgel”︁”︁) in 1 : 4 : 6 molar ratios, most advantageously in the presence of substantial amounts of NaCl as fluxing agent, after seven days at 850 °C in evacuated silica ampoules. The B‐type crystal structure (isotypic with e. g. Yb₃Cl[SiO₄]₂) contains discrete orthosilicate tetrahedra [SiO₄]^4– which form anionic double layers ({(Sm1)₂[SiO₄]₂}^2–) with (Sm1)³⁺. These are alternatingly sheethed along [010] with cationic monolayers ({(Sm2)Cl}²⁺) consisting of (Sm2)³⁺ and Cl^–. Both crystallographically independent Sm³⁺ cations exhibit coordination numbers of eight (Sm1: 1 Cl + 7 O; Sm2: 2 Cl + 6 O) with respect to the involved electronegative particles.     

Détermination expérimentale du diagramme de phase du système chlorure de cadmium-chlorure de potassium

A solid liquid phase equilibria diagram of Cd Cl₂K Cl has been obtained by thermal analysis. X-ray diffraction confirms deposition of pure components and of two compounds (Cd Cl₂ · K Cl) and (Cd Cl₂ · 4 K Cl). The first is congruently melting; the second is incongruently melting. Two eutectic and one peritectic transforms are observed for the mole fractions of K Cl 0.344, 0.620, 0.685 at the temperatures 658.5 K, 663.4 K, 733 K.     

Global Planar Tetra-, Penta- and Hexa-coordinate Silicon Clusters Constructed by Decorating SiO3 with Alkali Metals

The achievement of the rule-breaking planar hypercoordinate motifs (carbon and other elements) is mainly attributed to a practical electronic stabilization mechanism, where the bonding of the central atom p_z π electrons is a crucial issue. We have demonstrated that strong multiple bonds between the central atom and partial ligands can be an effective approach to explore stable planar hypercoordinate species. A set of planar tetra-, penta- and hexa-coordinate silicon clusters were herein found to be the lowest-energy structure, which can be viewed as decorating SiO₃ by alkali metals in the MSiO₃⁻, M₂SiO₃ and M₃SiO₃⁺ (M=Li, Na) clusters. The strong charge transfer from M atoms to SiO₃ effectively results in [M]⁺SiO₃²⁻, [M₂]²⁺SiO₃²⁻ and [M₃]³⁺SiO₃²⁻ salt complexes, where the Si−O multiple bonding and structural integrity of the Benz-like SiO₃ framework is maintained better than the corresponding SiO₃²⁻ motifs. The bonding between M atoms and SiO₃ motif is best described as M⁺ forming a few dative interactions by employing its vacant s, p, and high-lying d orbitals. These considerable M←SiO₃ interactions and Si−O multiple bonding give rise to the highly stable planar hypercoordinate silicon clusters.