3—Mercaptopropionic Acid Capped Gold Nanoclusters：Quantized Capacitance in Aquesous Media

3-Mercaptopropionic acid monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electorn microscopy,UV-Vis spectroscopy,X-ray photoelectron spectroscopy and Fourler transform infrared spectroscopy.The exact value of quantized double-layer capacitance of MPCs in aqueous media was obtained by differential pulse voltammograms.     

Preparation, characterization, and chemical stability of gold nanoparticles coated with mono-, bis-, and tris-chelating alkanethiols

A systematically varying series of monolayer-protected clusters (MPCs) was prepared by exposing small gold nanoparticles ( approximately 2 nm in diameter) to the following four adsorbates: n-octadecanethiol ( n - C18), 2-hexadecylpropane-1,3-dithiol ( C18C2), 2-hexadecyl-2-methylpropane-1,3-dithiol ( C18C3), and 1,1,1-tris(mercaptomethyl)heptadecane ( t - C18). The resultant MPCs were characterized by solubility studies, UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FT-IR). All of the MPCs were soluble in common organic solvents; moreover, analysis by TEM showed that the core dimensions were unaffected by exposure to any of the adsorbates. Separate studies by XPS revealed that the sulfur atoms in all MPCs were predominantly bound to the surface of gold (i.e., approximately 85% or better). Analysis by FT-IR showed that MPCs functionalized with n - C18 possessed alkyl chains having the greatest conformational order in both the solid-state and dispersed in solution; in contrast, those generated from the other three adsorbates were more liquid-like with reduced conformational order (or crystallinity). The rate of nanoparticle decomposition induced by cyanide ions was monitored by UV-vis spectroscopy. While MPCs functionalized with n - C18 showed the fastest rate of decomposition, those functionalized with C18C3 were the most resistant to decomposition. Overall, the following trend in chemical stability was observed, C18C3 > C18C2 > t - C18 > n - C18.     

Mercaptocarborane-capped gold nanoparticles: electron pools and ion traps with switchable hydrophilicity

A simple single-phase method for the preparation of ca. 2 nm gold nanoparticles capped with mercaptocarborane ligands is introduced. The resultant monolayer protected clusters (MPCs) exhibit redox-dependent solubility and readily phase transfer between water and nonpolar solvents depending on the electronic and ionic charge stored in the metal core and in the ligand shell, respectively. The particles and their properties have been characterized by high angle annular dark field imaging in a scanning transmission electron microscope, elemental analysis, centrifugal particle sizing, UV-vis and FTIR spectroscopy, and thermogravimetric analysis and by (1)H, (11)B, and (7)Li NMR spectroscopy. Cellular uptake of the MPCs by HeLa cells has been studied by TEM, and the subsequent generation of reactive oxygen species inside the cells has been evaluated by confocal fluorescence microscopy. These MPCs qualitatively showed significant toxicity and the ability to penetrate into most cell compartments with a strong tendency of finally residing inside membranes. Applications in catalysis, electrocatalysis, and biomedicine are envisaged.     

Water-soluble nitric oxide-releasing gold nanoparticles

The synthesis and characterization of water-soluble nitric oxide (NO)-releasing monolayer-protected gold clusters (MPCs) are reported. Tiopronin-protected MPCs ( approximately 3 nm) were functionalized with amine ligands and subsequently exposed to 5 atm of NO to form diazeniumdiolate NO donors covalently bound to the gold MPC. Diazeniumdiolate formation conditions, NO-release, and nanoparticle stability were examined as a function of the structure of the protecting ligand, pH, and storage time. Despite their aqueous solubility, proton-initiated decomposition of the diazeniumdiolate-modified Tio-MPCs resulted in only modest NO-release (<0.023 micromol/mg) for short durations (<1.5 h). To increase the NO storage capacity of gold nanoparticles, polyamine-stabilized MPCs ( approximately 5 nm) were synthesized with significantly enhanced NO-release properties (0.386 micromol/mg) and durations (up to 16 h). Transmission electron microscopy, thermogravimetric analysis, nuclear magnetic resonance spectroscopy, elemental analysis, and UV-vis spectroscopy were used to characterize both nanoparticle systems before and after NO exposure. The MPCs represent the smallest water-soluble NO-release nanoparticles to date (3-5 nm).     

Arylthiolate-protected silver quantum dots

This paper describes a new, organic-soluble 4-tert-butylbenzyl mercaptan (BBT) monolayer-protected silver cluster (AgBBT MPC) as the first example of a dissolved silver nanoparticle that exhibits quantized one-electron double layer charging (QDL) voltammetry. Polydisperse AgBBT MPCs made by two different synthetic protocols, but with similar average core diameters (2.1 nm), exhibit sharply differing electrochemistry and optical absorbance spectra. A two-phase procedure (organic/aqueous, termed Prep A-AgBBT) produced MPCs exhibiting a 475 nm surface plasmon absorbance and QDL voltammetry. Neither property was seen for MPCs made by a single-phase procedure, termed Prep B-AgBBT. The difference is thought to reflect poor passivation to oxide formation in the latter Prep B procedure, which is supported by X-ray photoelectron spectroscopy results. Thermogravimetry, mass spectra, and electrochemistry results suggest an average stoichiometric formula of Ag140BBT53, but transmission electron microscopy shows that the products are also polydisperse and include polycrystalline aggregates. Dry, cast films of both Ag MPC preparations on interdigitated array electrodes exhibit low electron hopping conductivity, compared to Au MPCs.     

Hydrogen reactivity of palladium nanoparticles coated with mixed monolayers of alkyl thiols and alkyl amines for sensing and catalysis applications

Palladium monolayer-protected clusters (MPCs) coated with octylamines (C8NH(2)), hexanethiolates (C6S), and mixed monolayers of C8NH(2) and C6S exhibit significantly different reactivities with hydrogen gas, depending on the relative amounts of the two ligands coating the Pd nanoparticle surface, as determined by UV-vis spectroscopy of Pd MPCs in solution and electronic measurements of films of Pd MPCs as a function of exposure time to hydrogen. The average estimated composition of the ~3.0 nm diameter Pd MPCs was Pd(919)(C6S)(192) or Pd(919)(C8NH(2))(177-x)(C6S)(x), where x was varied to be 0, 3, 10, 16, 32, or 81 by the synthesis of pure C8NH(2) Pd MPCs and subsequent liquid-phase place exchange with a varied amount of C6SH. When x = 0-10, the Pd MPCs react strongly with H(2), leading to aggregated particles in solution and large irreversible changes in the morphology of films accompanied by an increase in film conductivity by 2-5 orders of magnitude. Pd(919)(C6S)(192) MPCs are stable against significant aggregation in solution and do not exhibit large film morphology changes, but they are also not highly reactive to H(2), as determined by minimal changes in the optical properties of solutions and the small, irreversible changes in the conductivity of films in the presence of H(2). Finally, when x is 32 and 81, the Pd MPCs are fairly stable, exhibit minimal aggregation or morphology changes, and readily react with H(2) based on the significant, reversible changes in film conductivity in the presence of H(2). Pd MPCs with mixed monolayers have the benefit of high H(2) reactivity while maintaining the structural stability necessary for sensing and catalysis applications.     

Effect of chloride anion on the electrochemical charging of gold nanoparticle films

Reactivity of halide anion (Cl^?) with monolayer-protected gold nanoclusters (MPCs) of 1.8 nm in diameter has been studied. Typically, thin films of MPCs were prepared on an electrode surface and immersed in aqueous solutions containing Cl^?. It was observed that Cl^? inevitably resulted in the destruction of electrochemical charging of MPC films, which was studied and analyzed in details by cyclic voltammetry, electrochemical quartz crystal microbalance, and X-ray photoelectron spectroscopy measurements. The destruction is most likely due to the strong affinity of Cl^? for the surface of MPCs, leading to a significant variation of the surface structure and thereby quenching the electrochemical charging property.     

Synthesis and characterization of phosphido-monolayer-protected gold nanoclusters

Gold-phosphido-monolayer-protected clusters (MPCs) of 1-2-nm diameter, Au(x)(PR2)y, analogues of the well-known thiolate materials Au(x)(SR)y, were prepared by NaBH4 reduction of a mixture of HAuCl4.3H2O and a secondary phosphine PHR2 in tetrahydrofuran/water. In comparison to the Au-thiolate MPCs, fewer of the larger phosphido groups are required to cover the surface, and the Au-P bond is not cleaved as readily in reactions with small molecules as is its Au-S counterpart. 31P NMR spectroscopy provides a direct method to study cluster formation and the interaction of the phosphido ligand with the gold surface.     

Gold nanoclusters protected by conformationally constrained peptides

The preparation and properties of a series of gold nanoclusters protected by thiolated peptides based on the alpha-aminoisobutyric acid (Aib) unit are described. The peptides were devised to form 0-3 C=O...H-N intramolecular hydrogen bonds, as required by their 3(10)-helical structure. The monolayer-protected clusters (MPCs) were prepared, using a modified version of the two-phase Brust-Schiffrin preparation, and fully characterized with (1)H NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The MPCs were obtained with core diameters in the range of 1.1-2.3 nm, depending on the reaction conditions. Structured peptides formed smaller clusters. The smallest MPC obtained is in agreement with the average formula Au(38)Pep(18). The results showed that the chemical integrity of the peptide is maintained upon monolayer formation and that the average number of peptide ligands per gold cluster is typically 75-85% the value calculated for alkanethiolate MPCs of similar sizes. The IR and NMR spectra indicated that in the monolayer the peptides are involved in both intra- and interligand C=O...H-N hydrogen bonds.     

Thiolate ligands for synthesis of water-soluble gold clusters

Water-soluble monolayer-protected gold clusters (MPCs) have been an object of investigation by many research groups since their first syntheses were reported in 1998 and 1999. The basic requirements for a ligand to form a monolayer protecting a gold cluster were established some time ago for alkanethiolate MPCs, but there has been no such information published for water-soluble MPCs. We identify 6 new ligands capable of forming water-soluble MPCs, as well as 22 water-soluble ligands that fail to form MPCs. Our findings contribute not only to the definition of the requirements for MPC formation but also to the variety of MPCs available for applications in chemistry and biology.     

Silver halide colloid precursors for the synthesis of monolayer-protected clusters

A new method for the synthesis of monolayer-protected silver clusters (MPCs) based on the two-phase reduction of a stable negatively charged silver bromide sol is described. Phase transfer of the colloid to toluene is accomplished using tetra-n-octylammonium bromide as the phase transfer reagent. The advantage of this synthesis is to uncouple the formation of the silver halide colloid from its transfer and reduction in the organic phase, thus allowing control over each reaction step. The silver colloid in toluene was reduced with aqueous borohydride in the presence of 4-bromobenzenethiol as the passivating agent. The UV-visible absorption spectra indicate the intermediate formation of Ag(core)AgBr(shell) clusters during reduction. The resulting MPCs have been characterized by optical and transmission electron microscopy, energy-dispersive X-ray analysis, thermogravimetry, and UV-vis absorption spectroscopy. The formation of spiral cracks in the nanoparticulate agglomerates on solvent evaporation was observed. The spectra of thin films obtained by solvent evaporation have been analyzed using an effective medium theory.     

Surface effects of monolayer-protected gold nanoparticles on the redox reactions between ferricyanide and thiosulfate

The intense research interest in nanosized particle materials is mainly fueled by their unique physical, chemical, electronic, and magnetic properties[1]. Among these, they have shown great application po-tentialities in the catalytic regulation of elec-t…     

Heterophase ligand exchange and metal transfer between monolayer protected clusters

This paper describes reactions in which ligands are exchanged and metals are transferred between monolayer-protected metal clusters (MPCs) that are in different phases (heterophase exchange) or are in the same phase. For example, contact of toluene solutions of alkanethiolate-coated gold MPCs with aqueous solutions of tiopronin-coated gold MPCs yields toluene-phase MPCs that have some tiopronin ligands and aqueous-phase MPCs that have some alkanethiolate ligands. In a second example, heterophase transfer reactions occur between toluene solutions of alkanethiolate-coated gold MPCs and aqueous solutions of tiopronin-coated silver MPCs, in which tiopronin ligands are transferred to the former and gold metal to the latter phase. These ligand and metal exchange reactions are inhibited when conducted under N(2). The results implicate participation of an oxidized form of Au (such as a Au(I) thiolate, Au(I)-SR) as both a ligand and metal carrier in the exchange reactions. Au(I)-SR is demonstrated to be an exchange catalyst.     

Synthesis and catalytic properties of soluble platinum nanoparticles protected by a thiol monolayer

Several new platinum monolayer protected clusters (MPCs) have been synthesized and characterized. Two methods of platinum reduction were used depending on the solubility of the thiol: sodium borohydride for the water-soluble thiols and lithium triethylborohydride for the organic soluble thiols. In general, reactant solutions containing a 1:1 thiol/Pt ratio yielded the best particles in a single-phase reaction. Higher thiol/Pt ratios produced lower yields of MPCs, while much lower ratios produced gray-black precipitates. The Pt MPCs were used as catalysts to hydrogenate allyl alcohol to propanol by reducing the carbon-carbon double bond. The Pt-mercaptoammonium MPCs were also used as catalysts in the hydrogenation of maleic acid to succinic acid. Differences in the catalytic hydrogenation rates among the various monolayer coatings for MPCs are attributed to the variations in ligand chain length, branching, charged functional groups, packing density, and core size.     

Reactivity of monolayer-protected gold nanoclusters at dye-sensitized liquid/liquid interfaces

Hexanethiolate monolayer-protected gold nanoclusters (MPCs) were used as redox quenchers at the polarizable water/1,2-dichloroethane (DCE) interface. Photocurrent responses originating from the heterogeneous quenching of photoexcited water soluble porphyrin complexes by MPCs dissolved in the DCE phase were observed. As MPCs can function as both electron acceptors and donors, the photocurrent results from the superposition of two simultaneous processes, which correspond to the oxidation and reduction of MPCs. The magnitude of the net photocurrent is essentially determined by the balance of the kinetics of these two processes, which can be controlled by tuning the Galvani potential difference between the two phases. We show that, within the available potential window, the apparent electron-transfer rate constants follow classical Butler-Volmer dependence on the applied potential difference.     

Understanding the oxidative stability of gold monolayer-protected clusters in the presence of halide ions under ambient conditions

We report on the oxidative stability of thiol-passivated Au monolayer-protected clusters (MPCs) made via a modified Brust-Schiffrin method. A sequential oxidation of the anchored thiol groups to disulfide and sulfonate groups and the oxidation of Au atoms to Au3+ species is observed upon exposure of Au MPCs to air in the presence of halide anions. In addition, the average nanoparticle size grows via aggregation of the MPCs, leading eventually to partial oxidation of the Au MPCs and precipitation of the remaining nanoparticles from solution or to complete oxidation of the gold atoms at high halide concentrations. These results show that Au MPCs are prone to oxidation in air in the presence of halide anions, and therefore, particles made using phase transfer reagents such as tetraoctylammonium bromide must be thoroughly removed to avoid particle size growth, oxidation, and precipitation of the Au MPCs. In addition, for biological applications involving Au MPCs, care must be taken to ensure that oxidation of MPCs in air is not problematic when working in media containing halide anions.     

Solvent effect on redox properties of hexanethiolate monolayer-protected gold nanoclusters

The capacitance of monolayer-protected gold nanoclusters (MPCs), C(MPC), in solution has been theoretically reconsidered from an electrostatic viewpoint, in which an MPC is considered as an isolated charged sphere within two dielectric layers, the intrinsic coating monolayer, and the bulk solvent. The model predicts that the bulk solvent provides an important contribution to C(MPC) and influences the redox properties of MPCs. This theoretical prediction is then examined experimentally by comparing the redox properties of MPCs in four organic solvents: 1,2-dichloroethane (DCE), dichloromethane (DCM), chlorobenzene (CB), and toluene (TOL), in all of which MPCs have excellent solubility. Furthermore, this set of organic solvents features a dielectric constant in a range from 10.37 (DCE) to 2.38 (TOL), which is wide enough to probe the solvent effect. In these organic solvents, tetrahexylammonium bis(trifluoromethylsulfonyl)imide (THATf2N) is used as the supporting electrolyte. Cyclic and differential pulse voltammetric results provide concrete evidence that, despite the monolayer protection, the solvent plays a significant effect on the properties of MPCs in solution.     

Absolute standard redox potential of monolayer-protected gold nanoclusters

The redox properties of monolayer-protected gold nanoclusters (MPCs) are considered from both the theoretical and experimental viewpoints. The "absolute standard redox potential" ([E0((z/z)-1))]abs) of MPCs is first derived from electrostatic considerations. A linear dependence of the absolute standard redox potential on the valence state of MPCs is theoretically predicted and verified experimentally. By employing ferricinium/ferrocene (Fc+/Fc) as a reference redox couple, the average valence state of MPCs at a given potential can be estimated.     

Redox properties of self-assembled gold nanoclusters

The redox properties of a monolayer of alkanethiolate-protected gold nanoclusters (MPCs) constructed on a gold slide electrode was studied in 1,2-dichloroethane (DCE) electrolyte solutions. The influence of the electrostatic interaction between attached MPCs and the substrate electrode on the absolute standard redox potential of MPCs was theoretically considered and studied experimentally.     

On the Size Evolution of Monolayer‐Protected Gold Clusters during Ligand Place‐Exchange Reactions: The Effect of Solvents

Ligand place‐exchange (LPE) reactions are extensively applied for the post‐functionalization of monolayer‐protected gold clusters (MPCs) by using excessive incoming ligands to displace initial ones. However, the modified MPCs are often enlarged or degraded; this results in ill‐defined size‐dependent properties. The growth of MPCs essentially involves an unprotected surface that is subsequently has gold atoms added or is fused with other gold cores owing to collision. Reported herein is a guideline for the selection of solvents to suppress unwanted MPC growth. Favorable solvents are those with significant affinity to gold or with low solubility for desorbed ligands because these properties retard LPE reactions and minimize the time available for unprotected gold cores. This finding provides a general and convenient approach to regulate the size of functionalized MPCs.