A quantum theory atoms in molecules investigation of Lewis base protonation

This investigation uses atomic properties derived from the quantum theory of atoms in molecules formalism to rationalize the infrared intensity of the stretching vibration that arises as a Lewis base (B) is protonated (B‐H mode). Moreover, the interacting quantum atom (IQA) partition is employed to evaluate the energetics of protonation. All calculations are performed at the CCSD/cc‐pVQZ level except by the IQA analysis, which is carried out by means of the B3LYP/cc‐pVQZ//CCSD/cc‐pVQZ treatment. First, an efficiency scale is established for Lewis bases in terms of the electronic charge transfer potential. Next, this study shows that the intensity of the B‐H stretching depends mostly on the electronic charge amount transferred to the proton. Thus, intensity data provide empirical assessment of Lewis base charge transfer efficiency. Finally, the group separation observed during correlation of proton affinities and electronic charge transfer potential is explained by the interaction energy between fragments of the protonated system.     

Clusters of Ammonium Cation—Hydrogen Bond versus σ‐Hole Bond

MP2/6‐311++G(d,p) calculations were performed on the NH₄⁺ ??? (HCN)_n and NH₄⁺ ??? (N₂)_n clusters (n=1–8), and interactions within them were analyzed. It was found that for molecules of N₂ and HCN, the N centers play the role of the Lewis bases, whereas the ammonium cation acts as the Lewis acid, as it is characterized by sites of positive electrostatic potential, that is, H atoms and the sites located at the N atom in the extension of the H?N bonds. Hence, the coordination number for the ammonium cation is eight, and two types of interactions of this cation with the Lewis base centers are possible: N?H ??? N hydrogen bonds and H?N ??? N interactions that are classified as σ‐hole bonds. Redistribution of the electronic charge resulting from complexation of the ammonium cation was analyzed. On the one hand, the interactions are similar, as they lead to electronic charge transfer from the Lewis base (HCN or N₂ in this study) to NH₄⁺. On the other hand, the hydrogen bond results in the accumulation of electronic charge on the N atom of the NH₄⁺ ion, whereas the σ‐hole bond results in the depletion of the electronic charge on this atom. Quantum theory of “atoms in molecules” and the natural bond orbital method were applied to deepen the understanding of the nature of the interactions analyzed. Density functional theory/natural energy decomposition analysis was used to analyze the interactions of the ammonium ion with various types of Lewis bases. Different correlations between the geometrical, energetic, and topological parameters were found and discussed.     

Electrochemical Immunosensors for the Rapid Screening of Cystic Fibrosis and Duchenne Muscular Dystrophy

Cystic Fibrosis (CF) and Duchenne Muscular Dystrophy (DMD) are well characterized progressive inherited diseases associated with significant morbidity and mortality. Therefore, the early, rapid and affordable diagnosis of these disorders through newborn screening is highly important for the appropriate management. Here, we report label‐free impedance immunosensors for the simple screening of CF and DMD through the detection of cystic fibrosis transmembrane conductance regulator (CFTR) protein fragment and a peptide sequence for dystrophin (DMD). The biosensors were constructed by the covalent immobilization of specific antibodies for CFTR and DMD on standard gold (Au) electrodes. The immunosensors response was measured based on the change in the electrochemical impedance spectroscopy (EIS) signals after binding with the peptides. The specific recognition of the immunosensor surfaces to the target antigens leads to retardation of the access of ferri‐ferrocyanide redox molecules to the surface and thus, enhances the charge transfer resistance (R_ct). These impedimetric immunosensors enabled sensitive, fast, selective and accurate estimation of CFTR and DMD levels within a linear range from 1.0 pg/mL to 1 μg/mL and 1.0 pg/mL to 10 ng/mL with lower detection limits of 0.8 and 0.7 pg/mL for CFTR and DMD, respectively. Moreover, the immunosensors were tested for the detection of CFTR and DMD in human serum showing very good agreement with enzyme‐linked immunosorbent assays (ELISA). This work represents a novel low cost analytical method that aims to satisfy the unmet public health need in the early diagnosis of CF and DMD and can be extended to detect other hereditary disorders.     

The special effect of fluoride on the chromatography of acidic analytes on polybutadiene-coated zirconia

Summary The special effect of fluoride as a Lewis base additive in suppressing the ligand-exchange interactions for acidic analytes on polybutadiene-coated zirconia (PBD-ZrO₂) has been investigated. We found that fluoride is more effective than phosphate in improving the separation efficiency for strong acids. The improvement is attributed to that fluoride has a smaller size and a more flexible coordination chemistry towards zirconium centers than phosphate; consequently, fluoride can more effectively improve the kinetics of the ligand-exchange processes for strongly acidic analytes. We demonstrated that using a small amount of fluoride in combination with a larger quantity of phosphate is a practical way to improve the separation efficiency and resolution for acidic analytes. Some example separations are presented.     

Enhancing the photoelectrochemical performance of BiVO<Subscript>4</Subscript> by decorating only its (040) facet with self-assembled Ag@AgCl QDs

Decorating a host semiconductor with quantum dots (QDs) is an important strategy for optimizing the separation efficiency and transfer of photogenerated charge carriers. In this work, we designed a heterojunction photoelectrocatalyst in which the (040) facet of BiVO₄ was decorated with self-assembled Ag@AgCl QDs (“Ag@AgCl/₀₄₀BiVO₄”). In this photocatalyst, photogenerated charge carriers are efficiently separated using a Z-scheme approach. A facile oil-in-water self-assembly method was employed to generate the composite photocatalyst, which was then characterized via XRD, XPS, SEM, TEM, etc. The results of this characterization indicated that the Ag@AgCl QDs were approximately 5 nm in size and were well dispersed across the (040) crystal facet of BiVO₄. PEC measurements indicated that the efficiency of electron–hole separation was enhanced when the BiVO₄ was decorated with Ag@AgCl QDs on just one of its facets (040) rather than across all of its surface. An attempt was also made to elucidate the mechanism of interfacial charge transfer in the Ag@AgCl/₀₄₀BiVO₄ system. Decorating a specific crystal facet (040) of BiVO₄ with Ag@AgCl QDs was found to facilitate the spatial separation of photogenerated charge carriers and to enhance the redox ability of the system.     

Sensitive measurement of serum 1α,25-dihydroxyvitamin D by liquid chromatography/tandem mass spectrometry after removing interference with immunoaffinity extraction

Vitamin D plays important roles in bone health and a variety of other pathophysiological conditions. 1α,25‐Dihydroxyvitamin D is the active form of vitamin D. Quantification of serum 1α,25‐dihydroxyvitamin D is useful for evaluation of several diseases including chronic renal failure, hypoparathyroidism, sarcoidosis, and rickets. Measurement of 1α,25‐dihydroxyvitamin D is very challenging due to its low circulating concentration and presence of interfering substances in serum. In this report, a liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for quantifying serum 1α,25‐dihydroxyvitamin D is described. Lithium adducts of 1α,25‐dihydroxyvitamin D were formed prior to mass spectrometry analysis to improve ionization efficiency. We tested a number of different sample preparation procedures and found that immunoaffinity extraction was the method of choice because it completely removed isobaric interferences and matrix effects present in patient serum. Extraction efficiency, expressed as absolute recovery, was greater than 60% in both patient serum and charcoal‐stripped serum. This method was linear from 3.4 to 206.2 pg/mL for 1α,25‐dihydroxyvitamin D₃ and 3.9 to 212.6 pg/mL for 1α,25‐dihydroxyvitamin D₂ with an accuracy of 89.8–98.4% and 97.5–115.7%, respectively. Inter‐assay and intra‐assay coefficients of variance (CVs) for both analytes at two different concentration levels ranged from 2.5–7.0%. Comparison with a radioimmunoassay for measuring total 1α,25‐dihydroxyvitamin D concentration using 40 patient samples showed a Deming regression slope of 0.751, a y‐intercept of 0.84 pg/mL, an r value of 0.7909, and a mean percentage difference of –27.1%. Comparison with a reference LC/MS/MS method (n = 20) showed a Deming regression slope of 1.020, a y‐intercept of 1.32 pg/mL, an r value of 0.9797, and a mean percentage difference of –2.9%. In conclusion, usage of immunoaffinity extraction enabled a sensitive LC/MS/MS method for quantification of 1α,25‐dihydroxyvitamin D in serum. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of malachite green in fish water samples by cloud‐point extraction coupled to cation‐selective exhaustive injection and sweeping‐MEKC

We have employed a high‐sensitivity off‐line coupled with on‐line preconcentration method, cloud‐point extraction (CPE)/cation‐selective exhaustive injection (CSEI) and sweeping‐MEKC, for the analysis of malachite green. The variables that affect CPE were investigated. The optimal conditions were 250 g/L of Triton X‐100, 10% of Na₂SO₄ (w/v), heat‐assisted at 60°C for 20 min. We monitored the effects of several of the CSEI‐sweeping‐MEKC parameters – including the type of BGE, the concentrations of SDS, the injection length of the high‐conductivity buffer, and the injection time of the sample – to optimize the separation process. The optimal BGE was 50 mM citric acid (pH 2.2) containing 100 mM SDS. In addition, electrokinetic injection of the sample at 15 kV for 800 s provided both high separation efficiency and enhanced sweeping sensitivity. The sensitivity enhancement for malachite green was 1.9×10⁴ relative to CZE; the coefficients of determination exceeded 0.9928. The LOD, based on an S/N of 3:1, of CSEI‐sweeping‐MEKC was 0.87 ng/mL; in contrast, when using off‐line CPE/CSEI‐sweeping‐MEKC the sensitivity increased to 69.6 pg/mL. This proposed method was successfully applied to determine trace amounts of malachite green in fish water samples.     

Determination of trace levels of metal ions in water samples by inductively coupled plasma mass spectrometry after on-line preconcentration on SO3-oxine CM-cellulose

Summary A method utilizing a miniature chelated ion-exchanger column of SO₃-oxine CM-cellulose has been developed to increase the sensitivity for multielement measurements by inductively coupled plasma mass spectrometry (ICP-MS). This matrix/analyte separation and preconcentration technique has been used to preconcentrate Mn, Co, Ni, Cu, Cd, and Pb from natural water samples. The multielement detection limits are in the low ppt (pg/mL) range. This FIA-ICP-MS method has been applied to the determination of various trace levels of metal ions in riverine reference material SLRS-2 and open ocean seawater reference material NASS-3.     

Lattice expansion boosting photocatalytic degradation performance of CuCo2S4 with an inherent dipole moment

Realizing efficient charge separation and directional transfer is a challenge for single-component semiconductors. The spatial electric field generated by dipole moment could promote charge separation. Here, three-dimensional hierarchical CuCo₂S₄ microspheres with lattice distortion were prepared, and lattice distortion was modulated by changing feed Co/Cu molar ratios in synthesis. CuCo₂S₄ showed asymmetric crystal structure, leading to generation of dipole moment. The charge separation efficiency of CuCo₂S₄ was related to lattice distortion, and lattice expansion was in favor for charge separation. The CuCo₂S₄ with feed Cu/Co molar ratio of 1:4 (CCS-4) showed the maximum lattice expansion and exhibited the highest photocatalytic activity, which was attributable to the highest charge separation efficiency and the largest specific surface area. CCS-4 can remove 95.4% of tetracycline hydrochloride within 40 min photocatalysis, and effectively improve the biodegradability of pharmaceutical wastewater. Importantly, this study provides a new vision for constructing single-component photocatalysts with high photocatalytic performance.     

One-Step Solvothermal Synthesis of Sub-2-µm Sea Urchin-Like TiO2 Microspheres for High-Performance Liquid Chromatography Stationary Phase

Sub-2-µm sea-urchin-like TiO₂ microspheres were prepared through the one-step solvothermal method. Results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that there are a lot of nanorods coming out from the center of the TiO₂ microsphere, making it look like a sea urchin. The morphology and structure of these microspheres are very suitable for chromatographic packing. During the separation of inorganic anions on this new stationary phase, the retention mechanism is electrostatic interaction, and the pH of the mobile phase plays an important role in retention behaviors. With this new stationary phase for separation of organic anions and nucleobases, Lewis acid–base interaction is more outstanding, which can cause peak broadening and tail for larger conjugated structure compounds. The separation of aromatic hydrocarbons on this new stationary phase demonstrates that Lewis acid–base interaction has a favorable influence on the separation of electron-rich aromatic hydrocarbons under normal phase chromatographic conditions.

Graphical abstract

     

Highly sensitive method for the determination of ropinirole with a lower limit of quantitation of 3.45 pg/mL in human plasma by LC‐ESI‐MS/MS: application to a clinical pharmacokinetic study

A highly sensitive, rapid assay method has been developed and validated for the estimation of ropinirole (RPR) in human plasma with liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the positive‐ion mode. A solid‐phase process was used to extract RPR and citalopram (internal standard, IS) from human plasma. Chromatographic separation was operated with 0.2% ammonia solution:acetonitrile (20:80, v/v) at a flow rate of 0.50 mL/min on a Hypurity C₁₈ column with a total run time of 3.2 min. The MS/MS ion transitions monitored were 261.2 → 114.2 for RPR and 325.1 → 209.0 for IS. Method validation and clinical sample analysis were performed as per FDA guidelines and the results met the acceptance criteria. The lower limit of quantitation achieved was 3.45 pg/mL and the linearity was observed from 3.45 to 1200 pg/mL. The intra‐day and inter‐day precisions were in the range of 4.71–7.98 and 6.56–8.31%, respectively. This novel method has been applied to a pharmacokinetic study of RPR in humans. Copyright © 2008 John Wiley & Sons, Ltd.     

Criteria for Efficient Photocatalytic Water Splitting Revealed by Studying Carrier Dynamics in a Model Al-doped SrTiO3 Photocatalyst

Overall water splitting (OWS) using semiconductor photocatalysts is a promising method for solar fuel production. Achieving a high quantum efficiency is one of the most important prerequisites for photocatalysts to realize high solar-to-fuel efficiency. In a recent study (Nature 2020 , 58, 411–414), a quantum efficiency of almost 100 % has been achieved in an aluminum-doped strontium titanate (SrTiO₃ : Al) photocatalyst. Herein, using the SrTiO₃ : Al as a model photocatalyst, we reveal the criteria for efficient photocatalytic water splitting by investigating the carrier dynamics through a comprehensive photoluminescence study. It is found that the Al doping suppresses the generation of Ti³⁺ recombination centers in SrTiO₃, the surface band bending facilitates charge separation, and the in situ photo-deposited Rh/Cr₂O₃ and CoOOH co-catalysts render efficient charge extraction. By suppressing photocarrier recombination and establishing a facile charge separation and extraction mechanism, high quantum efficiency can be achieved even on photocatalysts with a very short (sub-ns) intrinsic photocarrier lifetime, challenging the belief that a long carrier lifetime is a fundamental requirement. Our findings could provide guidance on the design of OWS photocatalysts toward more efficient solar-to-fuel conversion.     

Preparation and ion chromatographic properties of a new core-shell chromatographic support Al2O3/SiO2-10

A new stationary phase Al₂O₃/SiO₂-10 was prepared and characterized by XPS, XRD, SEM and surface analysis. The anion exchanger properties of this new stationary phase were investigated by the separation of inorganic anions in ion chromatography (IC). pH of the mobile phase, concentration and strength of the Lewis base of the elute, and the organic modifier of the mobile phase strongly affect the separation of inorganic anions, and anion exchange selectivities of the analyte on the new support are significantly different from quaternary ammonium styrene based anion exchangers. The result of separation of inorganic anions shows that the new stationary phase provides excellent column efficiency, well-defined chromatographic peaks and favorable retention times.     

Conceptual Quantum Chemical Analysis of Bonding and Noncovalent Interactions in the Formation of Frustrated Lewis Pairs

The contributions of covalent and noncovalent interactions to the formation of classical adducts of bulky Lewis acids and bases and frustrated Lewis pairs (FLPs) were scrutinized by using various conceptual quantum chemical techniques. Significantly negative complexation energies were calculated for fourteen investigated Lewis pairs containing bases and acids with substituents of various sizes. A Ziegler–Rauk‐type energy decomposition analysis confirmed that two types of Lewis pairs can be distinguished on the basis of the nature of the primary interactions between reactants; dative‐bond formation and concomitant charge transfer from the Lewis base to the acid is the dominant and most stabilizing factor in the formation of Lewis acid–base adducts, whereas weak interactions are the main thermodynamic driving force (>50 %) for FLPs. Moreover, the ease and extent of structural deformation of the monomers appears to be a key component in the formation of the former type of Lewis pairs. A Natural Orbital for Chemical Valence (NOCV) analysis, which was used to visualize and quantify the charge transfer between the base and the acid, clearly showed the importance and lack of this type of interaction for adducts and FLPs, respectively. The Noncovalent Interaction (NCI) method revealed several kinds of weak interactions between the acid and base components, such as dispersion, π–π stacking, C?H ??? π interaction, weak hydrogen bonding, halogen bonding, and weak acid–base interactions, whereas the Quantum Theory of Atoms in Molecules (QTAIM) provided further conceptual insight into strong acid–base interactions.     

Probing the Charge Transfer in a Frustrated Lewis Pair by Resonance Raman Spectroscopy and DFT Calculations

A classical Lewis adduct derives from a covalent bond between a Lewis acid and a base. When the adduct formation is precluded by means of steric hindrance the association of the respective acid-base molecular system is defined as a frustrated Lewis pair (FLP). In this work, the archetypal FLP Mes₃P/B(C₆F₅)₃ was characterized for the first time by resonance Raman spectroscopy, and the results were supported by density functional theory (DFT) calculations. The charge transfer nature of the lowest energy electronic transition, from phosphine to borane, was confirmed by the selective enhancement of the Raman bands associated to the FLP chromophore at resonance condition. Herein, we demonstrate the use of resonance Raman spectroscopy as a distinguished technique to probe the weak interaction involved in FLP chemistry.     

Micro-extraction procedures for the determination of Ra-226 in well waters by SF-ICP-MS

The radium-226 (t_1/2 = 1622 years) content of highly alkaline well water collected from the United Arab Emirates (UAE) was measured by double focusing sector-field inductively coupled plasma-mass spectrometry (SF-ICP-MS) after separation of the radium from other alkaline earth elements using a newly developed procedure. The results were comparable with those obtained by α-spectrometry for samples with concentrations ranging from 6.75 to 459 pg/L (0.25 to 17 Bq/L). Instrumental sensitivity on matrix-free samples was compared for two sample introduction systems, i.e. an Apex-Q high sensitivity system and a concentric nebulizer. A 12-fold improvement in sensitivity (instrumental detection limit = 1.5 pg/L or 55 mBq/L) was found when the Apex-Q system was used. Two chromatographic methods were tested for the sequential separation of the alkaline earth elements contained in the well water samples in order to reduce matrix and polyatomic interference effects. Optimal elution parameters were determined and used for the separation and pre-concentration of Ra-226 in those samples. A method detection limit of 0.189 pg/L (7 mBq/L), which corresponds to a mass of 0.38 fg of Ra-226 in the sample, was achieved. Only 2 mL of sample is necessary when a combination of 50 W-X8 and Sr*Spec resin, which are reusable, are utilized for the separation. This new analytical protocol significantly reduces sample preparation time resulting in a throughput rate of approximately 20 samples in only 8 h; faster than the other published extraction procedures.     

Dative Bonding between Group 13 Elements Using a Boron‐Centered Lewis Base

An electron‐rich monovalent boron compound is used as a Lewis base to prepare adducts with Group 13 Lewis acids using both its boron and nitrogen sites. The hard Lewis acid AlCl₃ binds through a nitrogen atom of the Lewis base, while softer Lewis acids GaX₃ (Cl, Br, I) bind at the boron atom. The latter are the first noncluster Lewis adducts between a boron‐centered Lewis base and a main‐group Lewis acid.     

Frustrated Lewis Pairs: Metal‐free Hydrogen Activation and More

Sterically encumbered Lewis acid and Lewis base combinations do not undergo the ubiquitous neutralization reaction to form “classical” Lewis acid/Lewis base adducts. Rather, both the unquenched Lewis acidity and basicity of such sterically “frustrated Lewis pairs (FLPs)” is available to carry out unusual reactions. Typical examples of frustrated Lewis pairs are inter‐ or intramolecular combinations of bulky phosphines or amines with strongly electrophilic RB(C₆F₅)₂ components. Many examples of such frustrated Lewis pairs are able to cleave dihydrogen heterolytically. The resulting H⁺/H^? pairs (stabilized for example, in the form of the respective phosphonium cation/hydridoborate anion salts) serve as active metal‐free catalysts for the hydrogenation of, for example, bulky imines, enamines, or enol ethers. Frustrated Lewis pairs also react with alkenes, aldehydes, and a variety of other small molecules, including carbon dioxide, in cooperative three‐component reactions, offering new strategies for synthetic chemistry.     

High‐performance liquid chromatography tandem mass spectrometry method for the determination of 2CC‐NBOMe and 25I‐NBOMe in human serum

2CC‐NBOMe {4‐chloro‐2,5‐dimethoxyphenethyl‐N‐[(2‐methoxyphenyl) methyl] ethanamine} and 25I‐NBOMe {2‐(4‐iodo‐2,5‐dimethoxyphenyl)‐N‐[(2‐methoxyphenyl) methyl] ethanamine} are of a class of N‐benzyl phenethylamine derivatives whose synthesis was first reported in the scientific literature in 2011. Recent reports from ‘personal drug experience websites’ and in the popular press indicate these drugs are the latest in a series of designer ‘Bath Salt’ drugs of abuse. The presented high‐performance liquid chromatography triple quadrupole mass spectrometry (HPLC/MS/MS) method was developed for the detection and quantification of 2CC‐NBOMe and 25I‐NBOMe in serum of intoxicated emergency department patients. The assay applies 2‐?(2,?5‐?dimethoxyphenyl)‐?N‐?(2‐?methoxybenzyl) ethanamine (25H‐NBOMe) as the internal standard. Samples were extracted using solid‐phase extraction columns. The chromatographic separation was performed on a Luna 3 µ C₈(2) 100 Å, 100 × 2.0 mm, column. Detection was accomplished by multiple‐reaction monitoring via an electrospray ionization source operating in the positive ionization mode. The calibration curves were linear over the investigated concentration range, 30–2000 pg/mL, with a lower limit of detection of 10 pg/mL for both 2CC‐NBOMe and 25I‐NBOMe. The method proved suitable for serum clinical toxicology testing. Two severely intoxicated emergency department patients were determined to have serum concentrations of 250 and 2780 pg/mL of 25I‐NBOMe using the presented method. Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneous determination of caffeine, theobromine, and theophylline by high-performance liquid chromatography

This work relates the development of an analytical methodology to simultaneously determine three methylxanthines (caffeine, theobromine, and theophylline) in beverages and urine samples based on reversed-phase high-performance liquid chromatography. Separation is made with a Bondesil C18 column using methanol-water-acetic acid or ethanol-water-acetic acid (20:75:5, v/v/v) as the mobile phase at 0.7 mL/min. Identification is made by absorbance detection at 273 nm. Under optimized conditions, the detection limit of the HPLC method is 0.1 pg/mL for all three methylxanthines. This method is applied to urine and to 25 different beverage samples, which included coffee, tea, chocolate, and coconut water. The concentration ranges determined in the beverages and urine are: < 0.1 pg/mL to 350 microg/mL and 3.21 microg/mL to 71.2 microg/mL for caffeine; < 0.1 pg/mL to 32 microg mL and < 0.1 pg/mL to 13.2 microg/mL for theobromine; < 0.1 pg/mL to 47 microg/mL and < 0.1 pg/mL to 66.3 microg/mL for theophylline. The method proposed in this study is rapid and suitable for the simultaneous quantitation of methylxanthines in beverages and human urine samples and requires no extraction step or derivatization.