Preparation of hexagonal platy particles of nanoporous silica using hydrotalcite as morphology template

Hexagonal platy composite particles with a hydrotalcite core and a nanoporous silica shell with a thickness of ca. 100 nm were synthesized by the reaction of a Mg-Al hydrotalcite with a homogeneous aqueous solution containing tetraethoxysilane, hexadecyltrimethylammonium chloride, ammonia and methanol at 3 degrees C. The calcination of the products at 500 degrees C in air led to the composite particle with a Mg/Al mixed oxide core and a nanoporous silica shell. Hexagonal platy particles of nanoporous silica with a pore diameter of 2.3 nm and BET surface area of 700 m(2) (g of silica)(-1) were obtained by removing the Mg/Al mixed oxide core.     

Synthesis and characterization of pore size-tunable magnetic mesoporous silica nanoparticles

Magnetic mesoporous silica nanoparticles (M-MSNs) are emerging as one of the most appealing candidates for theranostic carriers. Herein, a simple synthesis method of M-MSNs with a single Fe(3)O(4) nanocrystal core and a mesoporous shell with radially aligned pores was elaborated using tetraethyl orthosilicate (TEOS) as silica source, cationic surfactant CTAB as template, and 1,3,5-triisopropylbenzene (TMB)/decane as pore swelling agents. Due to the special localization of TMB during the synthesis process, the pore size was increased with added TMB amount within a limited range, while further employment of TMB lead to severe particle coalescence and not well-developed pore structure. On the other hand, when a proper amount of decane was jointly incorporated with limited amounts of TMB, effective pore expansion of M-MSNs similar to that of analogous mesoporous silica nanoparticles was realized. The resultant M-MSN materials possessed smaller particle size (about 40-70 nm in diameter), tunable pore sizes (3.8-6.1 nm), high surface areas (700-1100 m(2)/g), and large pore volumes (0.44-1.54 cm(3)/g). We also demonstrate their high potential in conventional DNA loading. Maximum loading capacity of salmon sperm DNA (375 mg/g) was obtained by the use of the M-MSN sample with the largest pore size of 6.1 nm.     

Elaboration of monodisperse spherical hollow particles with ordered mesoporous silica shells via dual latex/surfactant templating: radial orientation of mesopore channels

Monodisperse spherical hollow nanoparticles of mesoporous silica featuring mesopores with a radial orientation in the silica shell were synthesized via a dual-templating method. Specifically designed polystyrene latexes with anionic or cationic surface charges acted as the core templates, while cetyltrimethylammonium bromide served as a co-template to structure the mesopore formation during tetraethoxysilane hydrolysis/condensation. The particles were well-separated and presented homogeneous mesoporous silica shells. Average particle diameters were less than 200 nm, and the particles displayed high values of specific surface area and pore volume. The shell thickness and the hollow core diameter could be tuned independently while the radial pore structure was preserved. A detailed analysis of the nitrogen adsorption-desorption isotherms proved that the central cavity was completely isolated from the external medium, that is, only accessible through the radial mesopores of the shell. Consequently, our particles gather the advantages of a well-defined structure, straight penetrating channels across the silica shell, and a high accessible porous volume of the central core. These properties make them far better candidates than simple mesoporous particles for any storage and/or controlled release applications.     

Solvent evaporation induced aggregating assembly approach to three-dimensional ordered mesoporous silica with ultralarge accessible mesopores

A solvent evaporation induced aggregating assembly (EIAA) method has been demonstrated for synthesis of highly ordered mesoporous silicas (OMS) in the acidic tetrahydrofuran (THF)/H(2)O mixture by using poly(ethylene oxide)-b-poly(methyl methacrylate) (PEO-b-PMMA) as the template and tetraethylorthosilicate (TEOS) as the silica precursor. During the continuous evaporation of THF (a good solvent for PEO-b-PMMA) from the reaction solution, the template molecules, together with silicate oligomers, were driven to form composite micelles in the homogeneous solution and further assemble into large particles with ordered mesostructure. The obtained ordered mesoporous silicas possess a unique crystal-like morphology with a face centered cubic (fcc) mesostructure, large pore size up to 37.0 nm, large window size (8.7 nm), high BET surface area (508 m(2)/g), and large pore volume (1.46 cm(3)/g). Because of the large accessible mesopores, uniform gold nanoparticles (ca. 4.0 nm) can be introduced into mesopores of the OMS materials using the in situ reduction method. The obtained Au/OMS materials were successfully applied to fast catalytic reduction of 4-nitrophenol in the presence of NaHB(4) as the reductant. The supported catalysts can be reused for catalytic reactions without significant decrease in catalysis performance even after 10 cycles.     

Fabrication of uniform magnetic nanocomposite spheres with a magnetic core/mesoporous silica shell structure

A novel kind of magnetic core/mesoporous silica shell nanospheres with a uniform particle diameter of ca. 270 nm was synthesized. The inner magnetic core endues the whole nanoparticle with magnetic properties, while the outer mesoporous silica shell shows high enough surface area and pore volume. The synthesized material is expected to be applied to targeted drug delivery and multiphase separation. The storage and release of ibuprofen into and from the pore channels of the mesoporous silica shell, as a typical example, are demonstrated.     

Three-dimensional low symmetry mesoporous silica structures templated from tetra-headgroup rigid bolaform quaternary ammonium surfactant

Two kinds of highly ordered mesoporous silica materials (FDU-11, FDU-13) with novel three-dimensional (3-D) tetragonal and orthorhombic structures were synthesized by using tetra-headgroup rigid bolaform quaternary ammonium surfactant [(CH(3))(3)NCH(2)CH(2)CH(2)N(CH(3))(2)CH(2)(CH(2))(11)OC(6)H(4)C(6)H(4)O(CH(2))(11)CH(2)N(CH(3))(2)CH(2)CH(2)CH(2)N(CH(3))(3).4Br] (C(3-12-12)(-)(3)) as a template under alkaline conditions. High-resolution transmission electron microscopy (HRTEM), small-angle X-ray scattering (SAXS), and X-ray diffraction (XRD) show that mesoporous silica FDU-11 has primitive tetragonal P4/mmm structure with cell parameters a = b = 8.46 nm, c = 5.22 nm, and c/a ratio = 0.617. N(2) sorption isotherms show that calcined FDU-11 has a high BET surface area of approximately 1490 m(2)/g, a uniform pore size of approximately 2.72 nm, and a pore volume of approximately 1.88 cm(3)/g. Mesoporous silica FDU-13 has primitive orthorhombic Pmmm structure. The cell parameters are a = 9.81, b = 5.67, and c = 3.66 nm. N(2) sorption isotherms show that calcined FDU-13 has a high BET surface area of 1210 m(2)/g, a uniform mesopore size of approximately 1.76 nm, and a large pore volume of approximately 1.83 cm(3)/g. Such low symmetries for 3-D mesostructures (tetragonal and orthorhombic system) have not been observed before even in amphiphilic liquid crystals, which maybe resulted from an oblate aggregation of the bolaform surfactant and its strong electrostatic interaction with inorganic precursor. A probable mechanism has been proposed for the formation of such a 3-D low symmetrical mesostructure. These results will further extend the synthesis of mesoporous materials and may open up new opportunities for their new applications in catalysis, separation, and nanoscience.     

Molecular selective photocatalysis by TiO2/nanoporous silica core/shell particulates

The coating of TiO(2) particles (P25) by a nanoporous silica layer was conducted to impart molecular recognitive photocatalytic ability. TiO(2)/nanoporous silica core/shell particles with varied pore diameters of the shell were synthesized by the reaction of P25 with an aqueous mixture of tetraethoxysilane and alkyltrimethylammonium chloride with varied alkyl chain lengths, followed by calcination. The TEM and nitrogen adsorption/desorption isotherms of the products showed that a nanoporous silica shell with a thickness of ca. 2nm and controlled pore diameter (1.2, 1.6, and 2.7 nm) was deposited on the titania particle when surfactants with different alkyl chain lengths (C12, C16 and C22) were used. The water vapor adsorption/desorption isotherms of the core/shell particles revealed that a larger amount of water adsorbed on the core/shell particles when the pore diameter is larger. The (29)Si MAS NMR spectra of the core/shell particles showed that the amount of surface silanol groups was independent of the water vapor adsorption capacity of the products. The possible molecular recognitive photocatalysis on the products was investigated under UV irradiation using two kinds of aqueous mixtures containing different organic compounds with varied sizes and functional groups: a 4-butylphenol, 4-hexylphenol, and 4-nonylphenol mixture and a 2-nitrophenol, 2-nitro-4-phenylphenol, and 4-nitro-2,6-diphenylphenol mixture. It was found that the core/shell particles exhibited selective adsorption-driven molecular recognitive photocatalytic decomposition of 4-nonylphenol and 2-nitrophenol in the two mixtures.     

The role of pore size and structure on the thermal stability of gold nanoparticles within mesoporous silica

Highly dispersed gold particles (<2 nm) were synthesized within the pores of mesoporous silica with pore sizes ranging from 2.2 to 6.5 nm and different pore structures (2D-hexagonal, 3D-hexagonal, and cubic). The catalysts were reduced in flowing H2 at 200 degrees C and then used for CO oxidation at temperatures ranging from 25 to 400 degrees C. The objective of this study was to investigate the role of pore size and structure in controlling the thermal sintering of Au nanoparticles. Our study shows that sintering of Au particles is dependent on pore size, pore wall thickness (strength of pores), and pore connectivity. A combination of high-resolution TEM/STEM and SEM was used to measure the particle size distribution and to determine whether the Au particles were located within the pores or had migrated to the external silica surface.     

Preparation of ordered mesoporous SiC from preceramic polymer templated by nanoporous silica

Highly ordered mesoporous SiC materials were prepared by infiltrating viscous liquid preceramic polymer, allylhydridopolycarbosilane, into two types of surface modified nanoporous silica templates: mesoporous silica SBA-15 and mesocellular siliceous foam. The silica templates were subsequently etched off after pyrolysis at 1000 degrees C under nitrogen atmosphere with the resultant formation of ordered mesoporous structures. The mesoporous SiC materials, synthesized from both types of templates possessed high Brunauer-Emmett-Teller (BET) surface areas in the range of 250-260 m(2)/g with pore sizes of 3.4-3.6 nm. The ordered structures of mesoporous SiC were exact inverse replicas of their respective silica templates, as characterized by small angle X-ray diffraction (XRD), transmission electron microscope (TEM) images, and the adsorption-desorption isotherm of nitrogen.     

Mesoporous silica spheres from colloids

A novel method has been developed to synthesize mesoporous silica spheres using commercial silica colloids (SNOWTEX) as precursors and electrolytes (ammonium nitrate and sodium chloride) as destabilizers. Crosslinked polyacrylamide hydrogel was used as a temporary barrier to obtain dispersible spherical mesoporous silica particles. The influences of synthesis conditions including solution composition and calcination temperature on the formation of the mesoporous silica particles were systematically investigated. The structure and morphology of the mesoporous silica particles were characterized via scanning electron microscopy (SEM) and N2 sorption technique. Mesoporous silica particles with particle diameters ranging from 0.5 to 1.6 microm were produced whilst the BET surface area was in the range of 31-123 m2 g-1. Their pore size could be adjusted from 14.1 to 28.8 nm by increasing the starting particle diameter from 20-30 nm up to 70-100 nm. A simple and cost effective method is reported that should open up new opportunities for the synthesis of scalable host materials with controllable structures.     

Deposition of thin mesoporous silica films on glass substrates from basic solution

Transparent thin (ca. 100 nm) films of silica-surfactant mesostructured materials were deposited on borosilicate glass plates and soda-lime glass tubes from aqueous solutions containing tetraethoxysilane, alkyltrimethylammonium chloride, ammonia, and methanol. By calcination in air, the films became mesoporous (BET surface area of 700-900 m2 g-1) with pore diameter 2.0-2.8 nm.     

Synthesis of a three-dimensional cubic mesoporous silica monolith employing an organic additive through an evaporation-induced self-assembly process

We demonstrate a robust approach to the synthesis of a 3D cubic Im3m mesoporous silica monolith from SiO2/cetyltrimethylammoniumbromide (CTAB)/1,3,5-triisopropylbenzene (TIPB) sols having molar compositions of 1SiO2/0.0017HCl/5.2H2O/10EtOH/0.10CTAB/0.1-0.5TIPB by the evaporation-induced self-assembly (EISA) process. The addition of TIPB is aimed at altering the micelle geometry to spheroid from rodlike in the gel state; the change in micelle geometry leads to the formation of a 3D cage-type cubic mesostructure in the monolith. The synthesized materials exhibit BET surface areas of 800-1000 m(2)/g, a BJH pore diameter of 2.9-4.3 nm, and a pore volume of 0.7-1.0 cm(3)/g, demonstrating ultrahigh porosity of the 3D cubic mesostructure.     

Smart synthesis of hollow core mesoporous shell carbons (HCMSC) as effective catalyst supports for methanol oxidation and oxygen reduction reactions

The present paper describes an easy and quick synthesis of hollow core mesoporous shell carbon (HCMSC) simply templated from unpretreated solid core mesoporous shell silica using a cheap precursor like sucrose. Physical characterizations showed uniform spherical carbon capsules with a hollow macroporous core of ca. 305- and 55-nm-thick mesoporous shell, forming a well-developed 3-D interconnected bimodal porosity. High specific surface area and large pore volume were also confirmed, suggesting the obtained HCMSC as a promising catalyst support. HCMSC-supported Pt (nominal 20 wt.%) with an average Pt particle size of 1.9 nm was synthesized by wet impregnation, and a signal of strong interaction between carbon support and platinum was confirmed by X-ray photoelectron spectroscopy. In cyclic voltammetry and linear sweep voltammetry tests, the Pt/HCMSC electrode showed significantly higher electrocatalytic activity for methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) if compared with commercial Pt/Vulcan catalyst. The durability tests by cyclic voltammetry showed for the Pt/HCMSC a lower electrochemical active surface area loss than the commercial one in acidic solution. All the primary tests suggested that the Pt/HCMSC, due to its particular structure and the high dispersion of noble metal particles, is a promising catalyst for fuel cell applications, for MOR and ORR.     

Facile synthesis of mesoporous silica sublayer with hierarchical pore structure on ceramic membrane using anionic polyelectrolyte

A facile method for introducing mesoporous silica sublayer onto the surface of a ceramic membrane for use in liquid-phase separation is described. To reduce the electrostatic repulsion between the mesoporous silica sol and the ceramic membrane in highly acidic conditions (pH < 2), thus facilitating the approach of hydrolyzed silica sol to the surface of the membrane, poly(sodium 4-styrenesulfonate) (Na+PSS-, denoted as PSS-) was used as an ionic linker. The use of PSS- led to a significant reduction in positive charge on the ceramic membrane, as confirmed by experimental titration data. Consistent with the titration results, the amount of mesoporous silica particles on the surface of the ceramic membrane was low, in the absence of PSS- treatment, whereas mesoporous silica sublayer with hierarchical pore structure was produced, when 1 wt % PSS- was used. The results show that mesoporous silica grows in the confined surface, eventually forming a multistacked surface architecture. The mesoporous silica sublayer contained uniform, ordered (P6 mm) mesopores of ca. 7.5 nm from mesoporous silica as well as macropores ( approximately mum) from interparticle voids, as evidenced by transmission electron microscopy and scanning electron microscopy analyses. The morphologies of the supported mesoporous silica could be manipulated, thus permitting the generation of uniform needlelike forms or uniform spheroid particles by varying the concentration of PSS-.     

Preparation of mesostructured barium sulfate with high surface area by dispersion method and its characterization

The spherical and cubic mesoporous BaSO(4) particles with high surface area were successfully produced via one-step process through precipitation reaction in aqueous solution of Ba(OH)(2) and H(2)SO(4) with ethylene glycol (n-HOCH(2)CH(2)OH) as a modifying agent. The BaSO(4) nanomaterial revealed that the high surface area and the mesoporous was stable up to 400 degrees C. Agglomerate mesoporous barium sulfate nanomaterials were obtained by the reaction of Ba(2+) and SO(2-)(4) with ethylene glycol aqueous solution. The ethylene glycol was used to control the BaSO(4) particle size and to modify the surface property of the particles produced from the precipitation. The dried and calcined mesoporous BaSO(4) nanomaterials were characterized by X-ray diffraction (XRD), BET surface area and N(2) adsorption-desorption isotherm, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared resonance (FTIR) and thermogravimetric analysis (TGA). The as-prepared mesoporous dried BaSO(4) possesses a high BET surface area of 91.56 m(2) g(-1), pore volume of 0.188 cm(3) g(-1) (P/P(0)=0.9849) and pore size of 8.22 nm. The SEM indicates that the morphology of BaSO(4) nanomaterial shows shell like particles up to 400 degrees C, after that there is drastically change in the material due to agglomeration. Synthesis of mesoporous BaSO(4) nanomaterial is of significant importance for both sulphuric acid decomposition and oxidation of methane to methanol.     

A core-shell magnetic mesoporous silica sorbent for organic targets with high extraction performance and anti-interference ability

C(18)-functionalized mesoporous silica shell was successfully fabricated on the surface of an Fe(3)O(4)/SiO(2) core to obtain an Fe(3)O(4)/SiO(2)/SiO(2)-C(18) magnetic microsphere. The microsphere exhibited high extraction efficiency to organic targets and strong anti-interference ability to natural organic matter. It could be easily isolated from water solution after extraction.     

一步制备高比表面积介孔Co3O4-CeO2及其表征

以有序介孔二氧化硅KIT-6为硬模板,硝酸钴、硝酸铈为金属源,分别在真空辅助条件和普通搅拌条件下制备了介孔CoCeOx复合氧化物。采用XRD、SEM、TEM、N2吸脱附等技术表征了复合氧化物的物化性质,并评价其氧化甲苯的性能。结果表明,在真空辅助和搅拌条件下制备的CoCeOx氧化物是由Co3O4和CeO2组成的介孔Co3O4-CeO2复合氧化物,其比表面积分别为141和89 m^2·g^-1,平均孔径分别为8.7和9.6 nm。真空辅助纳米复制过程有利于金属盐的前驱体充分填充到模板的孔隙中,去除模板后,可以得到有序的介孔复合金属氧化物。所制备介孔钴铈复合氧化物具有孔道有序性好、比表面积大的特点,在挥发性有机化合物的氧化去除方面具有一定的应用前景。     

Preparation of a kind of mesoporous carbon and its performance in adsorptive desulfurization

Carbon materials were prepared using mesoporous silica HMS with different pore sizes as the hard templates and water-soluble phenolic resin as the carbon source. The obtained materials were characterized by powder X-ray diffraction, transmission electron microscopy and N₂ physical adsorption, and were used in adsorptive desulfurization. It has been shown that the carbon material prepared using HMS with larger pore size (>3 nm) presented uniform wormlike mesopore of 2.3 nm and large BET surface area (1903 m²/g). The mesoporous carbon was an excellent adsorbent to remove the refractory sulfur compound in diesel, especially dibenzothiophene and 4, 6-dimethyldibenzothiophene.     

Synthesis and characterization of Nano titania particles embedded in mesoporous silica with both high photocatalytic activity and adsorption capability

TiO(2)-xSiO(2) composites with a high specific surface area (up to 645 m(2)/g), large pore volume, and narrow distribution with average pore sizes ranging from 15 to 20 A have been synthesized by the sol-gel method. The results of characterization by XRD, BET, TEM, FTIR, and DRUV reveal that these TiO(2)-xSiO(2) composites exhibit a core/shell structure of a nano titania/Ti-O-Si species modified titania embedded in mesoporous silica. As compared to pure anatase, the embedding of nano titania particles into the mesoporous silica matrix results in a substantial blue shift of absorption edge from 3.2 to 3.54 eV and higher UV absorption intensity, which are attributed to the formation of the Ti-O-Si species modified titania in the interface between titania and silica. The as-synthesized TiO(2)-xSiO(2) composites exhibit both much higher absorption capability of organic pollutants and better photocatalytic activity for the photooxidation of benzene than pure titania. The better photocatalytic activity of as-synthesized TiO(2)-xSiO(2) composites than pure titania is attributed to their high surface area, higher UV absorption intensity, and easy diffusion of absorbed pollutants on the absorption sites to photogenerated oxidizing radicals on the photoactive sites.     

Direct nanocomposite of crystalline TiO2 particles and mesoporous silica as a molecular selective and highly active photocatalyst

Well-crystallised TiO2 particles (P-25, 20-30 nm in diameter) were directly incorporated into surfactant-templated mesoporous silica particles (pore diameter: 2.7 nm), and the composite material with a high TiO2 content (60 wt%) showed molecular selective and enhanced photocatalysis for decomposition of 4-nonylphenol.