Extraction,modification, and characterization of natural ligno-cellulosic fiber strands from napier grass

Napier grass is a high-productivity perennial grass that is a very important forage for animals in the tropics. In this research work, fiber strands from Napier grass were extracted and the effect of acetic acid treatment on their chemical composition, morphological and structural changes, and tensile and thermal properties was studied. The acid treatment was carried out using glacial acetic acid solution at three different concentrations (5, 10, and 15%) for 2 h. Chemical analysis indicated lowering of amorphous hemicellulose content on acid treatment. FT-IR spectroscopic studies revealed variation of functional groups on acid treatment. Scanning electron micrographs indicated roughening of the surface of the fiber strands due to the removal of the hemicellulose layer on acid treatment. X-ray diffraction analysis indicated an increase in crystallinity of the fiber strands on acid treatment. The thermal stability and tensile properties of the fiber strands increased on acid treatment. This fiber has competitive advantages when evaluated with other natural fibers and can be developed further as a potential reinforcement in polymer matrix composites.     

Mechanical Properties,Water Absorption,and Chemical Resistance of Napier Grass Fiber Strand–Reinforced Epoxy Resin Composites

Napier grass fiber strands were used as reinforcement to obtain composites with epoxy resin as matrix. To improve the surface, these fiber strands were treated with alkali solution. The composites were prepared by means of hand lay-up molding, then the effects of Napier grass fiber strand loading on mechanical properties such as tensile, flexural and impact, interfacial bonding, and chemical resistance were investigated. The composite with 20 wt.% Napier grass fiber strands gives excellent mechanical properties and chemical resistance, showing that it has the best bonding and adhesion of the composites. SEM micrographs of fractured and worn surfaces clearly demonstrate the interfacial adhesion between fiber and matrix. Alkali-treated Napier grass fiber strand–reinforced composites have better resistance to water and chemicals than the untreated fiber strand composites.     

Grass fiber reinforced phenol formaldehyde resin composite: preparation,characterization and evaluation of properties of composite

There is a growing interest in the development of new materials through utilization of natural resources. This paper describes evaluation of water leached and alkali treated chopped grass fiber reinforced phenol formaldehyde composite. Here alkali treatment of grass fiber was carried out by varying the concentration of sodium hydroxide. The thermal stability of the composite was assessed by thermogravimetric analysis (TGA). Fourier transformation infrared spectroscopic study of both water leached and alkali treated grass fiber‐phenolic resin composite was also performed. Water absorption and swelling behavior of grass fiber phenolic resin composites in water were studied and the alkali treated grass fiber‐resin composite showed less water absorption and swelling. A composite prepared from 1% alkali treated grass fiber and 55% resin, showed the highest tensile strength whereas a composite prepared from 5% alkali treated grass fiber and 55% resin, showed maximum flexural properties. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of Chemical Treatment and Fiber Loading on Mechanical Properties of Borassus (Toddy Palm) Fiber/Epoxy Composites

The aim of the present study was to investigate and compare the mechanical properties of untreated and chemically modified Borassus fiber–reinforced epoxy composites. Composites were prepared by the hand lay-up process by reinforcing Borassus fibers with epoxy matrix. To improve the fiber-matrix adhesion properties, alkali (NaOH) and alkali combined with silane (3-aminopropyltriethoxysilane) treatment of the fiber surface was carried out. Examinations through Fourier transform-infrared spectroscopy and scanning electron microscopy (SEM) were conducted to investigate the structural and physical properties of the Borassus fibers. Tensile properties such as modulus and strength of the composites made with chemically modified and untreated Borassus fibers were studied using a universal testing machine. Based on the experimental results, it was found that the tensile properties of the Borassus-reinforced epoxy composites were significantly improved as compared with the neat epoxy. It was also found that the fiber treated with a combination of alkali and silane exhibited superior mechanical properties to alkali-treated and untreated fiber composites. The nature of the fiber/matrix interface was examined through SEM of cryo-fractured samples. Chemical resistance of composites was also found to be improved with chemically modified fiber composites.     

Extraction and Characterization of Natural Cellulose Fibers from Maize Tassel

This article reports on the extraction and characterization of novel natural cellulose fibers obtained from the maize (tassel) plant. Cellulose was extracted from the agricultural residue (waste biomaterial) of maize tassel. The maize tassel fibers were obtained after treatment with NaOH and were carefully characterized while the chemical composition was determined. The chemical composition of the maize tassel fibers showed that the cellulose content increased from 41% to 56%, following alkali treatment. FT-IR spectroscopic analysis of maize tassel fibers confirmed that this chemical treatment also shows the way to partial elimination of hemicelluloses and lignin from the structure of the maize tassel fibers. X-ray diffraction results indicated that this process resulted in enhanced crystallinity of the maize tassel fibers. The thermal properties of the maize tassel fibers were studied by the TGA technique and were found to have improved significantly. The degradation temperature of the alkali-treated maize tassel fiber is higher than that of the untreated maize tassel fibers. This value convincingly showed the potential of maize tassel fibers for use in reinforced biocomposites and waste water treatment.     

Physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment

Sugar palm fiber (SPF) is one of the prospective fibers used to reinforce polymer composites. The aim of this study is to evaluate the physicochemical, thermal, and morphological properties of SPF after alkali and sea water treatments. The chemical constituents group and thermal stability of the SPF were determined using scanning electronic microscopy (SEM) along with energy dispersive X-ray spectroscopy and thermogravimetric analysis (TGA). Fourier transform infrared spectroscopy was carried out to detect the presence of functional groups in untreated and treated SPF. The SEM images after both treatments showed that the external surface of the fiber became clean as a result. However, the sea water treatment affected the fiber properties physically, while the alkali treatment affected it both physically and chemically by dissolving the hemicellulose in the fiber. The TGA results showed that untreated fiber is significantly more stable than treated fiber. In conclusion, the results show that the fiber surface treatment significantly affected the characterization of the fiber.     

Mechanical and thermal properties of Acacia leucophloea fiber/epoxy composites: Influence of fiber loading and alkali treatment

In this work, the influence of fiber content and alkali treatment on the mechanical and thermal properties of Acacia leucophloea fiber-reinforced epoxy composites was studied. Ten composite samples were fabricated by varying fiber content (5, 10, 15, 20, and 25 wt%); both untreated and treated fiber were soaked in a 5% NaOH solution for 45 min by using hand-layup method. The composite reinforced with 20 wt% treated fiber content exhibited better mechanical properties and thermal properties. Fourier transform infrared analysis, morphological analysis by atomic force microscope, and scanning electron microscope of composites were also performed.     

Physicochemical and mechanical properties of a novel fiber extracted from the stem of common reed plant

Natural fiber usage rather than the synthetic fibers is attracted by researchers due to their special features such as biodegradable, inexpensive, easy availability, low density, and good thermal properties. This present work deliberates the characterization and testing of untreated and treated fibers extracted from the common reed plant stem. From the characterization, it reveals that the treated fibers had higher crystallinity index value with 75.41% and cellulose content having 64.56%. The thermal stability and mechanical properties of fiber was improved by alkali treatment. The surface roughness of the fibers due to the elimination of the noncellulosic substance on alkali treatment is evidenced by SEM.     

碱处理丝光沸石的表征及其催化合成乙基叔丁基醚的性能

 研究了碱处理对丝光沸石物相、酸性质和催化合成乙基叔丁基醚(ETBE)性能的影响,并采用XRD,NH3-TPD,吡啶吸附的IR,SEM和N2吸附等方法对其进行了表征. 结果表明,碱处理含有模板剂的丝光沸石的相对结晶度、酸量、比表面积和孔容都增大. 碱处理已脱除模板剂的丝光沸石的相对结晶度、酸量、比表面积和孔容都减小. 碱处理含有模板剂的丝光沸石催化合成ETBE的活性明显高于碱处理已脱除模板剂的丝光沸石,在80 ℃左右即可达到最高活性点,其催化异丁烯的最高转化率为58%,比未经碱处理样品上异丁烯的最高转化率高约13%.     

Banana fiber-reinforced biodegradable soy protein composites

Banana fiber, a waste product of banana cultivation, has been used to prepare banana fiber reinforced soy protein composites. Alkali modified banana fibers were characterized in terms of density, denier and crystallinity index. Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were also performed on the fibers. Soy protein composites were prepared by incorporating different volume fractions of alkali-treated and untreated fibers into soy protein isolate (SPI) with different amounts of glycerol (25%–50%) as plasticizer. Composites thus prepared were characterized in terms of mechanical properties, SEM and water resistance. The results indicate that at 0.3 volume fraction, tensile strength and modulus of alkali treated fiber reinforced soy protein composites increased to 82% and 963%, respectively, compared to soy protein film without fibers. Water resistance of the composites increased significantly with the addition of glutaraldehyde which acts as cross-linking agent. Biodegradability of the composites has also been tested in the contaminated environment and the composites were found to be 100% biodegradable.     

A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical,thermal, mechanical and morphological properties

This research is focused to fundamentally understand the benefits of using Agave Americana C. plant as potential reinforcement in polymeric composites. The fibers were extracted from the external part of the bark of the plant, which grows worldwide in pastures, grasslands, open woodlands, coastal and riparian zones. In order to use the natural fiber as reinforcement it is paramount important to probe their chemical composition, microstructural behavior and mechanical properties. Hence, firstly the extracted fibers were chemically treated with NaOH, stearic acid, benzoyl peroxide and potassium permanganate. The chemical composition in terms of cellulose, hemicellulose, lignin and other waxy substances were determined using a standard TAPPI method. FT-IR technique was used to understand the character of molecular bonds, crystallinity and their correlations with various bonds in fiber structure. The thermal stability was investigated through thermogravimetric and differential scanning calorimetric analysis, and the mechanical characterization was performed by applying standard tensile test. The surface morphology of fibers was examined through scanning electron microscopy (SEM) and finally reliability scrutiny of all the analysis was carried out. The results of chemical modification techniques applied on the surfaces of natural fibers allows to produce superior fibers used to form the novel composite materials for light-weight application.     

Impact of alkali treatment on physico-chemical,thermal, structural and tensile properties of Carica papaya bark fibers

This study aims to examine the effect of sodium hydroxide (NaOH) treatment on the physico-chemical properties, structure, thermal, tensile and surface topography of Carica papaya fibers (CPFs). The surface of raw CPFs was modified by soaking with 5% NaOH solution for 15, 30, 45, 60, 75 and 90?min. The results of thermo-gravimetric analysis revealed that the optimum treatment time for alkali treatment was 60?min. It was found that the alkali treatment improved the properties of the CPFs. The results of TGA, FT-IR, XRD and AFM suggest that the treated CPF is a suitable alternative as reinforcement in polymer composites.     

Bending properties and cell wall structure of alkali-treated wood

Bending tests and X-ray diffraction studies were conducted on oven-dried wood samples (Picea jezoensis Carr.) treated with various concentrations of aqueous NaOH solution to investigate the influence of alkali treatment on the longitudinal contraction, bending properties, and cellulose structure. The length of the wood samples decreased and the density increased at NaOH concentrations greater than 10%. The Young’s modulus and the specific Young’s modulus decreased and the strain at yield increased for the same concentration range. However, the stress at yield was almost constant for all concentration ranges. X-ray diffraction analysis showed that lattice transformation from cellulose I to cellulose II did not occur during alkali treatment and the crystallinity index decreased at NaOH concentrations greater than 10%. The crystallinity index was linearly correlated with the changes in longitudinal contraction and the bending properties, which indicates that the increase in the proportion of amorphous components of the cellulose influences the longitudinal contraction and the bending properties of wood samples during alkali treatment.     

Changes in the Inter- and Intra- Fibrillar Structure of Lyocell (TENCEL®) Fibers after KOH Treatment

Lyocell fibers were treated with KOH up to 8 M which was demonstrated to distribute homogeneously at the outer zones of fiber cross section compared to NaOH which accesses more deeply but less homogenously. Both NaOH and KOH solutions can be used to lower significantly the fibrillation of lyocell fibers. However, due to intrafibrillar swelling together with deep penetration ability of alkali seen for NaOH treatments results in great fiber tensile strength loss which is not observed for KOH treatments due to its inability to penetrate the fiber completely. The porous structure of fibers was studied by inverse size exclusion chromatography (ISEC) to identify mean pore diameter, total pore area and accessible pore volume (APV). Mean pore diameter of fibers decreased after KOH treatments which did not change after NaOH treatments. Wide angle X-ray diffraction analyses (WAXD) were applied to identify the crystallinity index and crystallite size. In general, fiber properties such as water retention value, carboxyl content using methylene blue sorption method, depth of color measured after dyeing with C.I. Direct Red 81 and weight loss were distinctly different in the ranges up to 2 M, 2-5 M and 5 to 8 M KOH. KOH treatment suggests new possibilities for the pretreatment of lyocell fibers to lower fibrillation while slightly lowering elongation at break without a distinct loss in tensile strength and with less decrease in carboxyl content and weight loss without changing dyeing properties of fibers compared to NaOH treatment.     

Toughness enhancement of cellulose nanocomposites by alkali treatment of the reinforcing cellulose nanofibers

Nanocomposites were produced with NaOH aqueous solution-treated microfibrillated cellulose (MFC) and phenolic resin, and the mechanical properties were compared with their microcomposite counterparts based on pulp fiber. Tensile tests showed that strong alkali-treated MFC nanocomposites with resin content around 20 wt.% achieved strain at fracture values two times higher than those of untreated MFC nanocomposites and five times higher than those of untreated pulp microcomposites. The improvement in work of fracture of alkali-treated MFC nanocomposites was attributed to the ductility of the nanofibers caused by transformations in the amorphous regions along the cellulose microfibrils.     

Thermal kinetics and morphological investigation of alkaline treated rice husk biomass

Agro waste bio mass are creating challenges for environment in term of air pollution due to improper disposal. Rice milling is the process in which rice husk is produced as by-product. The agro-waste rice husk has tremendous potential to be used either in its raw form or in ash form. The inherent component of this waste cellulose provides enhanced properties in a reinforced composite when used as filler. Rice husk is the hard outer layer and covering rice seed, which makes reinforcement challenging in its original form. Fiber surface treatment significantly improves adhesion with matrix and various thermo chemical properties of filler as well as of composites. NaOH treatment is cost-effective and it ensures the adhesion with matrix by removal of hemicellulose and lignin. The chemical treatment of agro-waste (rice husk) is performed with 5% alkali solutions of NaOH in water. Results are compared with the properties of untreated rice husk for thermal and morphological characterizations. In the present work, we are trying to quantify the impact of chemical treatment on rice husk thermal decomposition and its kinetics. Thermogravimetric analysis and kinetics study of thermal degradation, provide key input towards pyrolysis pattern of rice husk, while FTIR and SEM analysis provide the prospects of this bio filler using a reinforcing agent to develop green composite and productive disposal. The FTIR data helps to find the possibilities of blending different bio fillers and natural fibers to find suitable reinforcing substances. The average activation energy of treated fiber is noted as 137.95 by KAS method and 108.08 by FWO method as compared to 55.56 by KAS method & 54.26 by FWO method for untreated rice husk.     

Physico-Chemical Properties of Alkali-Treated Acacia leucophloea Fibers

The attractive properties of raw Acacia leucophloea fibers (ALFs) resulted in this present study evaluating the physio-chemical properties of alkali-treated ALFs. The treatment of raw ALFs with 5% (w/v) sodium hydroxide solution with 45 min soaking time was found to be optimum. It was found that optimally treated ALFs had relatively higher tensile strength (357–1809 MPa), Young’s modulus (10.45–87.57 GPa), and percentage of elongation (1.91–5.88%) and high thermal stability. The optimally treated ALFs had high cellulose (76.69 wt.%) and low hemicellulose (3.81 wt.%) and lignin (13.67 wt.%) contents and higher crystallinity index (74.27%), as evidenced by the results of chemical and X-ray diffraction analyses.     

Physicochemical properties of alkali-treated new cellulosic fiber from cotton shell

The aim of this present investigation was to identify a new natural fiber from one of the cotton plant’s byproducts, which is chemically modified by alkaline treatment. Its characteristics were examined for the preparation of natural fiber–reinforced polymer composites. The cotton shell fibers (CSFs) were extracted from the cotton shell and its degree of crystallinity, crystallite size, chemical constituents group, and thermal stability were determined by X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis. The alkali treatment of CSFs is optimized at 5% (w/v) NaOH aqueous solution with 45 min soaking time.     

Extraction and Characterization of Novel Lignocellulosic Fibers From Thespesia Lampas Plant

In this work, the lignocellulosic fibers from the plant Thespesia lampas were extracted and investigated in detail. The prime objective of this work was to study the effect of alkali treatment on the chemical composition, tensile properties, morphological and structural changes, and thermal degradation of Thespesia lampas fibers. Chemical analysis, FT-IR, and ¹³C CP-MAS NMR spectroscopic studies indicated lowering of amorphous hemicellulose content on alkali treatment. Wide-angle X-ray diffraction studies indicated increase in crystallinity of the fibers on alkali treatment. The tensile strength and modulus of the fibers and thermal stability increased on alkali treatment. Scanning electron micrographs revealed roughening of the surface of the fibers due to the removal of the hemicellulose layer on alkali treatment. Tensile properties of Thespesia fibers were compared to those of other important natural fibers, and it was indicated as an alternative suitable source for composite construction.     

Effects of chemical modifications and MMT nanoclay addition on transport phenomena of naturally woven coconut sheath/polyester nanocomposites

Studies on the behavior of molecular transport properties such as thermal conductivity, gas permeability, volume and surface resistivity have been carried out for the naturally woven coconut sheath (CS) fiber reinforced composites with the addition of nanoclay and chemical treatment of fiber. The compression molding technique was used to fabricate the coconut sheath/clay reinforced hybrid composites. The morphological studies such as X-ray diffractogram (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) have been carried out for polyester nanocomposites and coconut sheath fiber. The decreased gas permeability, thermal conductivity and volume and surface resistivity have been observed with increasing the weight percentage of nanoclay in polyester matrix. In chemical modifications, the alkali and silane treated coconut sheath reinforced composites have shown great influence on the transport properties due to the increasing hydrophilic nature by the topographical changes at the fiber surface. Dielectric strength has also been reported in this paper for all types of composites. Infra-red (IR) spectra have also been taken to study the physical and chemical structural changes of treated coconut sheath.