Effect of detonation nanodiamonds on the electrocatalytic activity of asymmetric cobalt phthalocyanine: Covalent versus non-covalent linking

We report on the effect of detonation nanodiamonds (DNDs) on electrocatalytic properties of an asymmetrically substituted cobalt phthalocyanine (CoPc). The incorporation of DNDs onto cobalt phthalocyanine enhances its electrochemical behaviour. An asymmetrical CoPc alone, when π-π stacked (CoPc-DNDs(ππ)) or covalently linked (CoPc@DNDs) to DNDs is used to modify a glassy carbon electrode (GCE) for the electrocatalytic detection of hydrazine. In addition, the GCE was modified by sequentially adding CoPc and DNDs onto its surface, represented as GCE/CoPc-DNDs(seq) when CoPc is placed before DNDs on the electrode and GCE/DNDs-CoPc(seq) when DNDs are placed before CoPc, where seq represents sequential. The obtained catalytic rate for the detection of hydrazine on GCE/CoPc@DNDs was 9.3×10⁴ M⁻¹.s⁻¹ with a limit of detection as 0.33 μM. GCE/CoPc@DNDs gave better electrocatalytic activities when compared to its counterparts.     

Electrode Modification through Click Chemistry Using Ni and Co Alkyne Phthalocyanines for Electrocatalytic Detection of Hydrazine

This work reports on the development of sensors for the detection of hydrazine using glassy carbon electrodes (GCE) modified with phthalocyanines through click chemistry. Tetrakis(5‐hexyn‐oxy) cobalt(II) phthalocyanine (complex 2 ) and tetrakis(5‐hexyn‐oxy) nickel(II) phthalocyanine (complex 3 ) were employed as electrode modifiers for hydrazine detection. The GCE was first grafted via the in situ diazotization of a diazonium salt, rendering the GCE surface layered with azide groups. From this point, the 1, 3‐dipolar cycloaddition reaction, catalysed by a copper catalyst was utilised to “click” the phthalocyanines to the surface of the grafted GCE. The modified electrodes were characterized by scanning electrochemical microscopy, X‐ray photoelectron spectroscopy and cyclic voltammetry. The electrografted CoP 2 ‐clicked‐GCE and NiP 3 ‐clicked‐GCE exhibited electrocatalytic activity towards the detection of hydrazine. The limit of detection (LoD) for the CoPc‐GCE was 6.09 μM, while the NiPc‐GCE had a LoD of 8.69 μM. The sensitivity was 51.32 μA mM⁻¹ for the CoPc‐GCE and 111.2 μA mM⁻¹ for the NiPc‐GCE.     

Microchip capillary electrophoresis/electrochemical detection of hydrazine compounds at a cobalt phthalocyanine modified electrochemical detector

This article reports on the use of cobalt(II) phthalocyanine (CoPc)-modified carbon paste amperometric detector for monitoring hydrazine compounds following their microchip separation. The marked catalytic electrochemical properties of CoPc-modified electrode display enhanced sensitivity compared with unmodified carbon pastes at a relatively low detection potential (+0.5 V versus Ag/AgCl). Factors influencing the on-chip separation and detection processes have been optimized. Three hydrazines (hydrazine, 1,1 dimethylhydrazine, and phenylhydrazine) have been separated within 130 s at a separation voltage of 1 kV using a 10 mM phosphate run buffer (pH 6.5). The detection limits obtained from using the CoPc-modified carbon paste electrodes for hydrazine and phenylhydrazine are 0.5 and 0.7 μM, respectively, with linearity over the 20–200 μM range examined. Such miniaturization and speed advantages of microchip CE are coupled to the highly sensitivity and convenient preparation of CoPc-modified carbon paste electrode. The resulting microsystem should be attractive for field monitoring of toxic hydrazine compounds in environmental applications.     

Volcano correlations between formal potential and Hammett parameters of substituted cobalt phthalocyanines and their activity for hydrazine electro-oxidation

In this work we have examined the effect of the Co(II)/(I) formal potential of cobalt phthalocyanines (CoPcs) on their catalytic activity for the electro-oxidation of hydrazine. The activity of the different phthalocyanines was examined using these complexes adsorbed on graphite electrodes. When activities for the different metal chelates are compared as a plot of logI (at constant potential) versus the Co(II)/(I) formal potential an asymmetric volcano curve is obtained. For some complexes the rate of the reaction increases very sharply with the driving force of the catalyst (measured as its formal potential) and then it decreases for higher driving forces. The same plot is obtained when plotting log I versus the sum of the Hammett parameters of the substituents on the periphery of the phthalocyanine ring.     

Effects of Substituents on the Electrocatalytic Activity of Cobalt Phthalocyanines when Conjugated to Graphene Quantum Dots

We report on the π–π interactions between graphene quantum dots (GQDs) and the following cobalt phthalocyanine derivatives: cobalt monocarboxyphenoxy phthalocyanine (complex 1 ), cobalt tetracarboxyphenoxyphthalocyanine (complex 2 ), and cobalt tetraaminophenoxy phthalocyanine (complex 3 ). The conjugates (conj) with GQDs are represented as 1 @GQDs(conj), 2 @GQDs(conj) and 3 @GQDs(conj), respectively. The resulting phthalocyanine/GQDs conjugates were adsorbed on containing a glassy carbon electrode (GCE) using the drop and dry method. We explore the electrochemical properties of phthalocyanines functionalized with both electron withdrawing groups and electron donating groups when non‐covalently linked to the π‐electron rich graphene quantum dots. GCE/ 3, GCE/ 2 @GQDs(conj) and GCE/ 1 @GQDs(conj) had the lowest limits of detection (LOD). Sequentially modified electrodes showed less favourable detection limits compared to the conjugates.     

Non-linear correlations between formal potential and Hammett parameters of substituted iron phthalocyanines and catalytic activity for the electro-oxidation of hydrazine

The activity of the different iron phthalocyanines was examined using the complexes adsorbed on graphite electrodes. The effect of the Fe(II)/(I) formal potential of iron phthalocyanines on the their catalytic activity for the electro-oxidation of hydrazine was investigated. A plot of log k (rate constant at constant potential) versus the Fe(II)/(I) formal potential gives a volcano curve. The rate of the reaction increases with the driving force of the catalyst (measured as its formal potential) and then decreases for higher driving forces. A similar graph is obtained with a plot of log k versus the sum of the Hammett parameters of the substituents on the periphery of the phthalocyanine ligand. A maximum activity is obtained for a complexes having an M(II)/(I) redox potential close to –0.6 V which agrees with previous studies conducted with phthalocyanines of different metals and with cobalt phthalocyanines bearing different substituents.Dedicated to Prof. Wolf Vielstich on the occasion of his 80th birthday in recognition of his numerous contributions to interfacial electrochemistry.     

Theoretical study of the electron transfer reaction of hydrazine with cobalt(II) phthalocyanine and substituted cobalt(II) phthalocyanines

A theoretical model is proposed to explain the trend in reactivity of cobalt(II) phthalocyanine (CoPc) and substituted cobalt(II) phthalocyanines for the oxidation of hydrazine. Our study suggests that the reaction occurs via a through bond charge transfer pathway and not via a through space charge transfer pathway as was shown in previous work for the oxidation of 2-mercaptoethanol by CoPc (G.I. Cárdenas-Jirón and D.A. Venegas-Yazigi, J. Phys. Chem. A. 106, 11398 (2002)). We propose a mechanism for the oxidation of hydrazine based on a four-step energy profile which agrees with a mechanism proposed for the electro-oxidation of hydrazine mediated by cobalt phthalocyanines confined on a graphite electrode. We show that the step in the energy profile that involves formation of a radical of hydrazine seems to be a good starting point for the study of the transfer of the first electron in the oxidation of hydrazine mediated by different substituted cobalt(II) phthalocyanines.     

Click chemistry electrode modification using 4-ethynylbenzyl substituted cobalt phthalocyanine for applications in electrocatalysis

In this work, we report on the synthesis and applications of a new cobalt tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyanine (3) for the detection of hydrazine. The glassy carbon electrode (GCE) was first grafted through diazotization, providing the GCE surface layer with azide groups. Thereafter, the 1,3-dipolar cycloaddition reaction, catalyzed by a copper(I) catalyst was used to “click” complex 3 to the grafted surface of GCE. The new platform was then characterized using cyclic voltammetry (CV), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). This work shows that 3 is an effective sensor with sensitivity of 91.5 μA mM^?1 and limit of detection of 3.28 μM which is a great improvement compared to other reported sensors for this analyte.     

Volatile Organic Compound Sensing by Quartz Crystal Microbalances Coated with Nanostructured Macromolecular Metal Complexes

We report the construction of a molecular recognition layer composed of polyelectrolyte brushes and metal complexes on the surface of a quartz crystal microbalance (QCM) and the sensing abilities for various volatile organic compounds (VOCs). Atom‐transfer radical polymerization of 2‐(dimethylamino)ethyl acrylate from an initiator‐terminated self‐assembled monolayer yielded polyelectrolyte brushes on the surface of a weight‐detectable quartz crystal microbalance. One end of a poly[(2‐dimethylamino)ethyl methacrylate] brush was covalently attached onto the surface of a sensor. We found that metallophthalocyanines with four bulky pentaphenylbenzene substituents could adsorb volatile organic compounds selectively into their cavities. Macromolecular metal complexes were prepared by immersing polymer‐brush‐modified QCMs into an aqueous solution of sterically protected cobalt phthalocyanine. Anionic cobalt phthalocyanine was trapped in the polymer brushes and acted as a molecular receptor for the sensing of VOC molecules.     

Electrode Modification Using Alkynyl Substituted Fe(II) Phthalocyanine via Electrografting and Click Chemistry for Electrocatalysis

In this work, tetrakis(5‐hexyn‐oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4‐azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne‐azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM^?1 and a limit of detection of 1.09 µM.     

Multifunctional chemically modified electrodes with mixed cobalt phthalocyanine/nafion coatings

A novel composite electrode coating based on a mixture of cobalt phthalocyanine and Nafion is described. The resulting film has better properties than either of the two components alone, resulting in several potential-sensing applications. In particular, it exhibits electrocatalytic, preconcentration and permselectivity properties simultaneously. For example, effective differentiation between compounds undergoing electrocatalysis, based on their characteristic charge, is illustrated. Enhanced sensitivity is achieved simultaneously for solutes undergoing electrocatalysis or electrostatic binding. Cyclic voltammetry and rotating disk experiments are employed to characterize the catalytic, loading and transport characteristics. Factors determining the film's performance are explored. The practical analytical utility is illustrated by selective flow-injection measurements of hydrazine or hydrogen peroxide in the presence of oxalic or ascorbic acids, respectively. Low detection limits (e.g., 5.7 ng of hydrazine) are obtained.     

Electrode Modification Using Alkyne Manganese Phthalocyanine and Click Chemistry for Electrocatalysis

In this work, azidobenzene diazonium salt is grafted onto a glassy carbon electrode (GCE) followed by clicking of manganese tetrahexynyl phthalocyanine for the electrocatalysis of hydrazine. The GCE was first grafted via the in situ diazotization of a diazonium salt, rendering the GCE surface layered with azide groups. From this point, the 1,3‐dipolar cycloaddition reaction, catalyzed by a copper catalyst was utilized to ‘click’ the manganese tetrahexynyl phthalocyanine to the surface of the grafted GCE. This new platform was then characterized using cyclic voltammetry (CV), scanning electrochemical microscopy (SECM) and X‐ray photoelectron spectroscopy (XPS). Based on the cyclic voltammetry calibration curve of electrocatalysis for hydrazine, the clicked Mn phthalocyanine electrode proved to be an effective sensor with a sensitivity of 27.38 µA mM^?1 and the limit of detection (LoD) of 15.4 pM which is a great improvement compared to other reported sensors for this analyte.     

New approach to the suppression of phthalocyanine aggregation: synthesis of cobalt phthalocyanine complexes containing intramolecular bridges based on 2,7-disubstituted 9,9-bis(2,3-dicyanophenoxymethyl)fluorenes and study of their physical and catalytic properties

A series of new cobalt monophthalocyanine complexes containing intramolecular bridges between the C(1(11)) and C(25(15)) carbon atoms of phthalocyanine with perpendicular rigid fluorenyl substituents was synthesized from 2,7-di(H,Bu^t)-9,9-bis(2,3-dicyanophenoxymethyl)fluorenes. The spectral and catalytic properties of the synthesized complexes and cobalt 1,8(11),15(18),22(25)-tetraethoxyphthalocyaninate were studied.     

Catalytic properties of cobalt complexes with tetrapyrazino porphyrazine and phthalocyanine derivatives

The catalytic activity of cobalt complexes with octaphenyltetrapyrazinoporphyrazine and phthalocyanine derivatives containing branched peripheral substituents is studied in heterogeneous catalysis of the oxidation of sodium diethyldithiocarbamate (SDC) with atmospheric oxygen. Cobalt phthalocyanines are shown to display higher catalytic activity than cobalt complexes with octaphenyltetrapyrazinoporphyrazine. The highest efficiency of heterogeneous catalysts is attained at temperatures of 298–303 K.     

Use of novel cardanol-porphyrin hybrids and their TiO₂-based composites for the photodegradation of 4-nitrophenol in water

Cardanol, a well known hazardous byproduct of the cashew industry, has been used as starting material for the synthesis of useful differently substituted "cardanol-based" porphyrins and their zinc(II), copper(II), cobalt(II) and Fe(III) complexes. Novel composites prepared by impregnation of polycrystalline TiO? powder with an opportune amount of "cardanol-based" porphyrins, which act as sensitizers for the improvement of the photo-catalytic activity of the bare TiO?, have been used in the photodegradation in water of 4-nitrophenol (4-NP), which is a toxic and bio-refractory pollutant, dangerous for ecosystems and human health.     

Through-space and through-bond mixed charge transfer mechanisms on the hydrazine oxidation by cobalt(II) phthalocyanine in the gas phase

Two quantum chemistry theoretical models in the gas phase at the density functional theory B3LYP/LACVP(d) level of calculation are proposed to rationalize the hydrazine oxidation by cobalt(II) phthalocyanine (Co(II)Pc). This oxidation reaction involves the net transfer of four electrons. These theoretical models that are described in terms of energy profiles include a through-space mechanism for the transfer of the first electron of the hydrazine and a through-bond mechanism proposed for the transfer of the three electrons remaining. The main difference between both models arises from a one-electron and one-proton alternate transfer for model 1 and a two-electron and two-proton alternate transfer for model 2. The main problem for experimental studies is to determine if the first transfer corresponds to an electron or a chemical transfer. Under this point of view, we proposed two models which deal with this problem. We conclude that model 1 is more reasonable than model 2 because the whole oxidation process is always exergonic.     

Behavior of Palladium Nanoparticles in the Absence or Presence of Cobalt Tetraaminophthalocyanine for the Electrooxidation of Hydrazine

We report on the electrodeposition of palladium nanoparticles (PdNPs) on a glassy carbon electrode (GCE) and onto a poly‐CoTAPc‐GCE (CoTAPc=cobalt tetraamino phthalocyanine) surface. The electrodes are denoted as PdNPs‐GCE and PdNPs/poly‐CoTAPc‐GCE, respectively. PdNPs/poly‐CoTAPc‐GCE showed the best activity for the oxidation of hydrazine at the lowest potential of ?0.28 V and with the highest currents. The results were further supported by electrochemical impedance spectroscopy (EIS) which showed that there was less resistance to charge transfer for PdNPs/poly‐CoTAPc‐GCE compared to PdNPs‐GCE. The catalytic rate constant for hydrazine oxidation was 6.12×10⁸ cm³ mol^?1 s^?1 using PdNPs/poly‐CoTAPc‐GCE.     

Self-association of sulfo derivatives of cobalt phthalocyanine in aqueous solution

Sulfo derivatives of cobalt phthalocyanine containing naphthalene fragments have been synthesized, and their self-association and molecular complexation with pyridine in aqueous solution have been studied by spectrophotometry. The dissociation constants of the dimeric associates have been determined. The effects of the number of functional groups in the peripheral substituents and of the axial ligand on the phthalocyanine dimerization process have been revealed.     

Phthalocyanines formed from several precursors: synthesis,characterization, and comparative fluorescence and quinone quenching

Abstract

We have synthesized a new phthalonitrile with different substituents in 4- and 5-positions (1). Cyclotetramerization of 1 yielded phthalocyanines with cobalt(II) (2), zinc(II) (3), gallium(III)chloride (4), and indium(III)chloride (5) containing diethylamino-phenoxy and hexylsulfanyl substituents on each benzene unit. Elemental analyses, Fourier transform infrared spectra, ¹H-nuclear magnetic resonance spectra, mass spectra, and ultraviolet-visible spectra were used for characterization of the phthalocyanines. The aggregation behavior of the zinc phthalocyanine derivative was studied in different concentrations. Also four chloro and four diethyllaminophenoxy substituted zinc phthalocyanine (6) and octa-diethylaminophenoxy substituted zinc phthalocyanine (7) were synthesized. These phthalocyanines (3, 6, and 7) were compared for electronic absorption spectra, fluorescence quantum yields, fluorescent lifetimes, and fluorescence quenching in the presence of benzoquinone. The fluorescence quantum yield gives the efficiency of the fluorescence process. The fluorescence lifetime is an important parameter for practical applications of fluorescence such as fluorescence resonance energy transfer and fluorescence-lifetime imaging microscopy.