Sensor Modified with Gold Nanoparticles Stabilized in Dialdehyde Starch/DMSO Matrix for Methyldopa Detection

In this study, gold nanoparticles (AuNP) were synthesized using a novel stabilizer based on dialdehyde starch polymer (DAS) and dimethyl sulfoxide (DMSO) and the nanomaterial was applied to develop a sensor for methyldopa detection. The nanoparticles were characterized by transmission electron microscopy and the proposed sensor was electrochemically characterized by electrochemical impedance spectroscopy, chronocoulometry and square-wave voltammetry. Under optimized conditions (0.1 mol L⁻¹ McIlvaine buffer solution at pH 3.5 and 50 μL AuNP/DAS-DMSO), using square-wave voltammetry, the calibration curve presented a linear range of 0.99 to 19.60 μmol L⁻¹, with a detection limit of 0.50 μmol L⁻¹. The sensor showed good accuracy, with coefficients of variation of 7.8 % (inter-day; n=6) and 5.9 % (intra-day; n=3), and recovery values in the range of 95.3 to 105.2 %. The methyldopa content in a pharmaceutical sample was determined and the results show good correlation with the label value and the method recommended by the Pharmacopoeia, representing a fast and accurate alternative for detecting methyldopa in pharmaceutical products.     

Direct Electrochemical Determination of Glyphosate at Copper Phthalocyanine/Multiwalled Carbon Nanotube Film Electrodes

A copper phthalocyanine/multiwalled carbon nanotube film‐modified glassy carbon electrode has been used for the determination of the herbicide glyphosate (Gly) at ?50 mV vs. SCE by electrochemical oxidation using differential pulse voltammetry (DPV). Cyclic voltammetry and electrochemical impedance spectroscopy showed that Gly is adsorbed on the metallic centre of the copper phthalocyanine molecule, with formation of Gly‐copper ion complexes. An analytical method was developed using DPV in pH 7.4 phosphate buffer solution, without any pretreatment steps: Gly was determined in the concentration range of 0.83–9.90 μmol L^?1, with detection limit 12.2 nmol L^?1 (2.02 μg L^?1).     

Glassy Carbon Electrode Modified with Layering of Carbon Black/Poly(Allylamine Hydrochloride) Composite for Multianalyte Determination

An electrochemical sensor using glassy carbon electrode modified with carbon black within a poly(allylamine hydrochloride) film is proposed in this work. The novel sensor was characterized by scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry using the redox probe Fe(CN)6^3−/4−. The sensor was applied for the simultaneous determination of dopamine (DA), paracetamol (PAR), amlodipine (AML), and rosuvastatin (RSV). The quantification of all four analytes was carried out by linear sweep voltammetry and presented a linear concentration range for all analytes from 1.0 to 90 μmol L⁻¹, with limit of detection of 0.55, 1.3, 5.7, and 3.0 μmol L⁻¹ for DA, PAR, AML, and RSV, respectively. This sensor was successfully applied in the simultaneous determination of these analytes in environmental, pharmaceutical, and biological samples.     

Electrochemical Sensor Based on Multi‐walled Carbon Nanotubes and Cobalt Phthalocyanine Composite for Pyridoxine Determination

In this work, an electrochemical sensor based on pyrolytic graphite electrode (PGE), cobalt phthalocyanine (CoPc) and multiwalled carbon nanotube (MWCNT) composite designed as PGE‐MWCNT/CoPc was developed and validated for pyridoxine (vitamin B6) determination employing Differential Pulse Voltammetry (DPV). The electrochemical behaviour of pyridoxine at the PGE‐MWCNT/CoPc has been evaluated and the charge transfer coefficient, α, and the charge transfer rate constant, κ, were calculated as 0.30 and 11.67±0.43 s^?1, respectively, which indicates that, although this system is irreversible, it is viable kinetically to be used as a sensor. The optimized experimental conditions were pH 5.5 in 0.30 mol L^?1 phosphate buffer. The linear range found was 10 to 400 μmol L^?1 of pyridoxine, with r=0.9987. The limits of detection and quantification were 0.50 and 1.67 μmol L^?1, respectively, showing the good sensitivity of the method. The method was successfully applied for the pyridoxine determination in real samples of pharmaceutical formulation with RSD% lower than 5 % indicating that it can be used for routine quality control pharmaceutical formulations containing pyridoxine. Furthermore, it has the advantages of a fast response, a low detection limit and low cost.     

Development of a Sensor Based on Modified Carbon Paste with Com Iron(III) Protoporphyrin Immobilized on SiNbZn Silica Matrix for L‐tryptophan Determination

In this work, SiO₂/Nb₂O₅/ZnO prepared by the sol‐gel processing method was used as substrate base for immobilization of the protoporphyrin‐IX ion. Iron(III) ion was inserted into the porphyrin ring (SiNbZn‐PPFe). A simple square wave voltammetry method based on a composite sensor carbon paste electrode of this material,designed as EPC‐SiNbZn‐PPFe, was developed and validated successfully for the determination of L‐tryptophan (Trp). The optimum conditions were obtained by using sensor modified with 18.00 mg SiNbZn‐PPFe material, 12.00 mg graphite powder and 6.0 μL mineral oil and phosphate buffer 0.3 mol L⁻¹ pH 7.0. The sensitivity of the sensor was found to be 0.523 AL mol ⁻¹, linear range from 10 to 70 μmol L⁻¹ and limit of detection of 3.28 μmol L⁻¹. Therefore, the developed method was successfully applied for the Trp determination in real samples of pharmaceutical formulation and can be used for routine quality control pharmaceutical formulations containing Trp.     

Development of Electrochemical Platform Based on Molecularly Imprinted Poly(methacrylic acid) Grafted on Iniferter-modified Carbon Nanotubes for 17β-Estradiol Determination in Water Samples

This paper describes the development of a new electrochemical sensor for 17β-estradiol (E2) determination based on glassy carbon electrode (GCE) modified with molecularly imprinted polymer grafted onto iniferter-multiwall carbon nanotubes surface (MIP-MWCNT) and dihexadecyl-hydrogen-phosphate (DHP). The electrochemical method was based on closed-circuit preconcentration of E2 in 0.1 mol L⁻¹ phosphate buffer (pH 7.0) during 500 s. Upon preconcentration, E2 was determined by differential pulse voltammetry (DPV) exhibiting a limit of detection of 0.01 μmol L⁻¹. The sensor exhibited higher selectivity toward E2 and it was applied for E2 determination in natural water samples, with accuracy attested by HPLC-DAD.     

Simple and rapid determination of clonidine in pharmaceutical samples by voltammetry using a bare glassy carbon electrode

This work presents, for the first time, the voltammetric behavior of clonidine (CLO) drug and its determination, using an unmodified glassy carbon electrode (GCE). CLO exhibited only an irreversible oxidation process on the GCE, with peak potential at +0.85 V in pH 12 (vs Ag/AgCl). CLO oxidation process is pH-dependent and the electrochemical mechanisms on the GCE were proposed in acidic and basic medium. The determination of CLO was optimized in 0.1 mol L⁻¹ phosphate buffer solution at pH 12.0 using differential pulse voltammetry (DPV), which provides a good linear range (0.65 to 106.00 μmol L⁻¹) and low theoretical limit of detection (0.14 μmol L⁻¹) for the quality control of this drug in pharmaceutical samples. In addition, stable responses of CLO at the GCE were obtained in the same day (RSD = 3.4 %; n = 5) and different days (RSD = 2.0 %; n = 3). Moreover, the determination of CLO in a pharmaceutical formulation using the proposed GCE-DPV method presented good accuracy, since the recovery was close to 100 % and the dosing result was in agreement with an official method (HPLC-UV). The proposed method demonstrates a good analytical performance for CLO determination in pharmaceutical samples, providing a faster, simpler and lower-cost alternative for quality control of CLO than other reported methods.     

Bismuth Nanoparticles@Porous Silicon Nanostructure,Application as a Selective and Sensitive Electrochemical Sensor for the Determination of Thioridazine

A bismuth@porous silicon (Bi/PSi) nanostructure is fabricated and used as a new highly sensitive electrochemical sensor for measurement of thioridazine. For this purpose, commercial silicon powder is converted to porous silicon using metal‐assisted chemical etching method. Then, bismuth nanoparticles are deposited on the surface of the porous silicon that synthesized in the previous step. The effects of pH and instrumental parameters are studied on the sensor response. After optimization of the parameters, differential pulse voltammetry is used to determine sub‐micro molar amounts of thioridazine. The Linear region of the electrochemical sensor is in the range of 0.1 to 260 μmol L⁻¹ thioridazine with a detection limit of 0.03 μmol L⁻¹, when Bi/PSi/CNTPE is used as an electrochemical sensor. The precision and accuracy of the sensor is evaluated. The Bi/PSi/CNTPE is used as an appropriated tool for accurate measurement of low amounts of thioridazine in real samples with satisfactory results.     

Disposable Pencil Graphite Electrode for Ciprofloxacin Determination in Pharmaceutical Formulations by Square Wave Voltammetry

In this work, a new electrochemical sensor based on pencil graphite with interesting features, such as low cost (US$ 0.01 per electrode), ease manufacture, and portability was developed. The sensor showed an adequate manufacturing reproducibility with RSD <5.3 %. Under this electrochemical platform, ciprofloxacin underwent an irreversible oxidation process at 1.03 V, characterized by the diffusion of electroactive species. A simple method by square wave voltammetry (SWV) has been optimized for the determination of ciprofloxacin in pharmaceutical formulations using a pencil graphite electrode (PGE). The method showed satisfactory analytical performance, with a wide linear range (12 to 55 μmol L⁻¹), low detection limit (5.6 μmol L⁻¹), adequate precision (RSD <3.2 %), and accuracy with an average recovery of (102±15)%. Samples of pharmaceutical formulations were evaluated, obtaining levels of ciprofloxacin close to those established by the manufacturers. In addition, the samples were analyzed by liquid chromatography and there was no significant difference between the methods at the 95 % confidence level. In this sense, the method developed proved to be reliable and promising for the quality control of pharmaceutical formulations.     

Cost-effective and Facile Production of a Phosphorus-doped Graphite Electrode for the Electrochemical Determination of Pyridoxine

In this study; a sensitive, selective, and simple electrochemical sensor was developed to determine low concentration pyridoxine (Py) using a phosphorus-doped pencil graphite electrode (P-doped/PGE). Electrode modification was implemented using the chronoamperometry method at +2.0 V constant potential and 100 seconds in 0.1 mol L⁻¹ H₃PO₄ supporting electrolyte solution. The characterization processes of the P-doped/PGE were carried out using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and atomic force microscope (AFM) methods. In the concentration study, using the differential pulse voltammetry (DPV) method, a linear calibration plot was acquired in the concentration range of 0.5 to 300 μmol L⁻¹ Py. The limit of quantification (LOQ) and limit of detection (LOD) of the developed method were calculated as 0.219 μmol L⁻¹ and 0.0656 μmol L⁻¹, respectively. Detection of Py has been successfully performed on the P-doped/PGE in the beverage samples. As a result, the method developed has been shown to have fast, low cost, and simple for the sensitive and selective detection of Py as an effective electrode.     

Electrochemical sensing platform based on the use of ZnONPs and MWCNTs as CPE modifiers for a selective and sensitive determination of polyamine spermine in the urine sample

A simple electroanalytical procedure has been developed for the determination of polyamine spermine using the ZnONPs-MWCNTs-CPE sensor. Spermine has been irreversibly oxidized on a modified electrode at a potential of +0.92 V versus Ag/AgCl (KCl, 3.5 mol L⁻¹). The developed sensor demonstrated a respective linear response in borate buffer pH 8.5 from 2 μmol L⁻¹ to 100 μmol L⁻¹, with a detection limit of 0.300 μmol L⁻¹ and quantification limit of 0.998 μmol L⁻¹. The proposed sensor showed high reproducibility (RSD = 2.58 %), stability, robustness, and no obvious interference effects of several inorganic ions and organic molecules. The obtained results demonstrated excellent performance during the determination of the spermine in human urine samples with satisfactory recovery results (98.41–101.34 %), offering promising opportunities for practical clinical analysis.     

Electrochemical Sensor Based on Multiwalled Carbon Nanotube,Alizarine Red S and Chitosan for Simultaneous Determination of Oxomemazine Hydrochloride,Paracetamol and Guaifenesin

A simple and highly sensitive sensor has been used for the determination of oxomemazine hydrochloride (OXO) in presence of paracetamol (PAR) and guaifenesin (GU). Carbon paste electrode was modified with multiwalled carbon nanotube (MWCNT), alizarine red S (AZ) and chitosan (CH). Scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to characterize the nanostructure and performance of the sensor. Under the optimized experimental conditions OXO gave linear response over the range of 2.00×10⁻⁶–1.00×10⁻⁴ mol L⁻¹. The detection limit was found to be 4.35×10⁻⁷ mol L⁻¹. The practical application of the modified electrode was demonstrated by measuring the concentration of OXO in pharmaceutical samples and urine. This revealed that suggested sensor shows excellent analytical performance for the determination of OXO in terms of a very low detection limit, high sensitivity and selectivity.     

Simultaneous Electrochemical Determination of Hydroquinone and Bisphenol A using a Carbon Paste Electrode Modified with Silver Nanoparticles

In this paper, a rapid and sensitive modified electrode for the simultaneous determination of hydroquinone (HQ) and bisphenol A (BPA) is proposed. The simultaneous determination of these two compounds is extremely important since they can coexist in the same sample and are very harmful to plants, animals and the environment in general. A carbon paste electrode (CPE) was modified with silver nanoparticles (nAg) and polyvinylpyrrolidone (PVP). The PVP was used as a reducing and stabilizing agent of nAg from silver nitrate in aqueous media. The nAg‐PVP composite obtained was characterized by transmission electron microscopy and UV‐vis spectroscopy. The electrochemical behavior of HQ and BPA at the nAg‐PVP/CPE was investigated in 0.1 mol L⁻¹ B−R buffer (pH 6.0) using cyclic voltammetry (CV) and square wave voltammetry (SWV). The results indicate that the electrochemical responses are improved significantly with the use of the modified electrode. The calibration curves obtained by SWV, under the optimized conditions, showed linear ranges of 0.09–2.00 μmol L⁻¹ for HQ (limit of detection 0.088 μmol L⁻¹) and 0.04–1.00 μmol L⁻¹ for BPA (limit of detection 0.025 μmol L⁻¹). The modified electrode was successfully applied in the analysis of water samples and the results were comparable to those obtained using UV‐vis spectroscopy.     

Voltammetric Detection of Ethinylestradiol in Water and Synthetic Urine Samples using a Ni(II) Phthalocyanine/Iron Oxide Nanocomposite Electrode

A novel nickel phthalocyanine/iron oxide nanoparticle (NiTsPc/ION) nanocomposite electrode is proposed for the voltammetric detection of ethinyl estradiol. The method shows a wide linear range (0.07–30 μmol L⁻¹, R² >0.99), sensitivity of 0.308 μA cm⁻²/μmol L⁻¹ and limit of detection of 7.8 nmol L⁻¹ (3.3 Sb/b). Recoveries are above 95 % for quantification in tap and treatment plant water samples and synthetic urine. A single electrode can be used in seven consecutive runs (RSD=2.85 %) and responses of different electrodes vary only 7–9 %. The excellent sensing performance of the proposed sensor is ascribed to its porous morphology and efficient charge-transfer between ION and NiTsPc.     

Photoelectrochemical Sensor for Isoniazid: Application in Drugs Used in the Treatment of Tuberculosis

The present work describes the development of a photoelectrochemical sensor based on titanium dioxide, cadmium telluride quantum dots and the tris (2,2′-bipyridyl) ruthenium(II) chloride complex for detection of Isoniazid (INH). The Ru(bpy)₃²⁺/CdTe-QDs/TiO₂/FTO photoelectrochemical platform was characterized by scanning electrochemical microscopy, electrochemical impedance spectroscopy and amperometry. The photoelectrochemical sensor presented two linear ranges for INH concentrations ranging from 0.5 to 150 μmol L⁻¹ and 150 to 1270 μmol L⁻¹, with a theoretical detection limit of 0.02 μmol L⁻¹. The sensor was successfully applied for the determination of INH in drugs samples used in the treatment of tuberculosis.     

Nanoporous Gold Microelectrode: A Novel Sensing Platform for Highly Sensitive and Selective Determination of Arsenic (III) using Anodic Stripping Voltammetry

A home‐made gold microelectrode (Au‐μE) was fabricated and its surface was modified with nanoporous gold structures via a facile electrochemical approach (anodization followed by electrochemical reduction method). The fabricated nanoporous Au microelectrode (NPG‐μE) was used as a sensor probe for the determination of As(III) in 1.0 mol L⁻¹ HCl solution using square wave anodic stripping voltammetry (SWASV) technique. Field emission scanning electron microscopy (FE‐SEM) and cyclic voltammetry were used to characterize the surface morphology and assess the electrochemical surface area and the roughness factor of the NPG‐μE. SWASVs recorded with the NPG‐μE in As(III) solutions indicated linear behaviour in the concentration ranges of 10–200 μg L⁻¹ and 2–30 μg L⁻¹, with regression coefficients of 0.996 and 0.999 at a deposition time of 120 s, respectively. The limit of detection (LOD) was found to be 0.62 μg L⁻¹ with high sensitivity of 29.75 μA (μg L⁻¹)⁻¹ cm⁻². Repeatability and reproducibility were also examined and values were determined as 3.2 % and 9.0 %. Negligible interference from major interfering copper ion was noticed, revealing the excellent anti‐interference property of the proposed sensing platform. The developed NPG‐μE was successfully used for As(III) determination in tap water samples.     

Voltammetric Detection of Captopril in a Commercial Drug Using a Gold-Copper Metal-organic Framework Nanocomposite Modified Electrode

We report the application of an electrochemical sensor based on gold-copper metal-organic framework immobilized on the surface of a glassy carbon electrode to the detection of captopril (CAP), an angiotensin-converting enzyme inhibitor. Cyclic voltammetric studies showed that the joint action of gold nanoparticles and copper-1,3,5-benzenetricarboxylate (Cu−BTC) enhanced the electrochemical response to the Cu-captopril complex that is adsorbed onto the surface of the electrode. Release of gold nanoparticles from Au@Cu−BTC not only increased the conductivity of the electrode but also provided a more favorable environment for the deposition of reduced Cu that is catalytically renewed on the electrode surface. The anodic current of the Cu^(II)−CAP oxidation peak varied linearly within two concentration ranges, namely 0.5 to 7.0 μmol L⁻¹ and 10 to 2500 μmol L⁻¹, with a limit of detection of 0.047 μmol L⁻¹. The mean recovery for the determination of captopril in commercial tablets was 100.3 % suggesting that the method has considerable potential for future industrial applications.     

Ultralow Cost Electrochemical Sensor Made of Potato Starch and Carbon Black Nanoballs to Detect Tetracycline in Waters and Milk

Detection of traces from pharmaceutical drugs such as antibiotics in drinking water and foodstuff is essential for guaranteeing human health in some environments, and this has to be done with low cost technologies to be widely deployed in public services and industry. In this paper, we describe an ultralow cost (<US$ 0.005 per unit of sensing layer) electrochemical sensor to detect the antibiotic tetracycline, which is made of a homogeneous thin film of potato starch (PS) and carbon black (CB) deposited on glassy carbon electrodes (GCE). Detection of tetracycline was also performed in real samples consisting of tap water, river water, milk and in solutions prepared with commercial tablets of this medicine in the range between 5.0 and 120 μmol L⁻¹, with a detection and quantification limit of 1.15 and 4.47 μmol L⁻¹, respectively. The high sensitivity was attributed to the enhanced conductivity and larger surface area induced by incorporating the carbon black into potato starch. The CB‐PS/GCE electrodes were reproducible and stable, thus serving as a generic platform for detection of other antibiotics and hormones whose redox potentials are similar to those of tetracycline.     

A Graphite‐Polyurethane Composite Electrode for the Analysis of Furosemide

A graphite‐polyurethane composite electrode has been used for the determination of furosemide, a antihypertensive drug, in pharmaceutical samples by anodic oxidation. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the electrooxidation process at +1.0 V vs. SCE over a wide pH range, with the result that no adsorption of analyte or products occurs, unlike at other carbon‐based electrode materials. Quantification was carried out using cyclic voltammetry, differential pulse voltammetry, and square‐wave voltammetry. Linear ranges were determined (up to 21 μmol L^?1 with cyclic voltammetry) as well as limits of detection (0.15 μmol L^?1 by differential pulse voltammetry). Four different types of commercial samples were successfully analyzed. Recovery tests were performed which agreed with those obtained by spectrophotometric evaluation. The advantages of this electrode material for repetitive analyzes, due to the fact that no electrode surface renewal is needed owing to the lack of adsorption, are highlighted.     

Fabrication of β‐Cyclodextrin/Glycine/Carbon Nanotubes Electrochemical Neurotransmitters Sensor – Application in Ultra‐sensitive Determination of DOPAC in Human Serum

In this work, an electrochemical sensor was constructed by applying two successive thin layers of glycine‐carbon nanotubes mixture and β‐cyclodextrin (CNTs‐Gly)/CD over glassy carbon electrode surface for some neurotransmitters determination. A host‐guest interaction between CD and neurotransmitters molecules is expected and resulted in enhanced sensitivity, selectivity and stability of sensor response. Other components of the sensor are crucial for the unique electrochemical response. Carbon nanotubes allowed large surface area for glycine distribution that provided hydrogen bonding to CD moieties and contributed to facilitated charge transfer. It was possible to determine 3,4‐dihydroxy phenyl acetic acid (DOPAC) in the linear range of 0.1 μmol L⁻¹ to 80 μmol L⁻¹ with detection limit of 9.40 nmol L⁻¹, quantification limit of 31.5 nmol L⁻¹ and sensitivity of 4.16 μA/μmol L⁻¹. The proposed sensor was applied in synthetic cerebrospinal fluids samples using random standard addition method. Also, the proposed sensor was used to determine DOPAC in presence of common interferences and acceptable recovery results were achieved for its analysis in real blood serum. Figures of merit for (CNTs‐Gly)/CD composite in terms of precision, robustness, repeatability and reproducibility were reported.