Conductive 2D Metal-organic Framework (Co,NiCo, Ni) Nanosheets for Enhanced Non-enzymatic Detection of Urea

2D metal-organic framework (MOF) has potential applications in electrocatalysis owing to fast mass transfer, charge transfer and large specific surface area. Here, we had prepared three conductive 2D MOF based on Ni, NiCo and Co in a simple and rapid way. The 2D nanostructure of MOF was confirmed by SEM and TEM. The chemical composition was studied by XRD, Raman and XPS spectrum. The electrochemical oxidation and detection was investigated through cyclic voltammetry and current-time method. Their sensing performance for urea was determined by varying oxidation potentials and metal sites. The non-enzymatic Ni-, NiCo- and Co-MOF sensors had good catalytic activity for urea. Compared with NiCo- and Co-MOF, Ni-MOF had a wider linear range (0.5–832.5 μM), high sensitivity (1960 μA mM⁻¹ cm⁻²), low detection limit (0.471 μM), and fast response time. The sensors had well repeatability, reproducibility, and selectivity to specific interfering species. Furthermore, Ni- and NiCo-MOF modified electrode was also applied to detection of milk samples. The results showed that the recovery was satisfactory, which further confirmed the effectiveness of non-enzyme sensor. In general, the highly-sensitive 2D Ni- and NiCo-MOF modified electrode has great potential as nonenzymatic urea sensors for real samples detection in hydrogen energy, clinical diagnostics, and environmental protection, et al.     

A Recyclable bi‐functional Luminescent Zinc (II) metal–organic framework as highly selective and sensitive sensing probe for nitroaromatic explosives and Fe3+ ions

By introducing carboxyl tag to the aromatic ligands system and borrowing the organic template open framework idea, a stable fluorescent Zn metal–organic framework was successfully prepared through a rigid ligand H₆L (3,5‐bis‐(3‐carboxyphenoxy)benzoic acid) under hydrothermal conditions. The selectivity and sensitivity of the Zn‐MOF to metal ions and nitro‐aromatic compounds (NACs) were investigated by fluorescence quenching. And the Zn‐MOF showed a high sensibility of nitro‐aromatic compounds (NACs) and Fe³⁺ ions, especially for 4‐(4‐nitropheny lazo) resorcinol (NPLR). More importantly, the detection limit of the Zn‐MOF for detecting NPLR solution was found to be 1.71 ppb. Moreover, this sensor is remarkable recyclable and is promisingly applied for rapid, on‐site and sensing of explosive residuals.     

On‐Chip Tailorability of Capacitive Gas Sensors Integrated with Metal–Organic Framework Films

Gas sensing technologies for smart cities require miniaturization, cost‐effectiveness, low power consumption, and outstanding sensitivity and selectivity. On‐chip, tailorable capacitive sensors integrated with metal–organic framework (MOF) films are presented, in which abundant coordinatively unsaturated metal sites are available for gas detection. The in situ growth of homogeneous Mg‐MOF‐74 films is realized with an appropriate metal‐to‐ligand ratio. The resultant sensors exhibit selective detection for benzene vapor and carbon dioxide (CO₂) at room temperature. Postsynthetic modification of Mg‐MOF‐74 films with ethylenediamine decreases sensitivity toward benzene but increases selectivity to CO₂. The reduced porosity and blocked open metal sites caused by amine coordination account for a deterioration in the sensing performance for benzene (by ca. 60 %). The enhanced sensitivity for CO₂ (by ca. 25 %) stems from a tailored amine–CO₂ interaction. This study demonstrates the feasibility of tuning gas sensing properties by adjusting MOF–analyte interactions, thereby offering new perspectives for the development of MOF‐based sensors.     

A new Eu-MOF for ratiometrically fluorescent detection toward quinolone antibiotics and selective detection toward tetracycline antibiotics

Development of new self-calibrating fluorescent sensing methods has been a popular research field with the aim of protecting the human health and environment sustainability. In this work, a novel Eu-based metal organic framework(MOF) Eu(2,6-NDC)(COO)(BUC-88) was developed by employing 2,6-NDC(2,6-naphthalenedicarboxylic acid) as bridging ligands. BUC-88 performed different sensing process toward quinolone antibiotics and tetracyclines antibiotics in terms of fluorescence intensity and color. BUC...     

Stepwise Assembly of Turn‐on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn‐on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene‐based fluorescent linker and a hemicyanine‐containing CN^?‐responsive linker were sequentially installed into the lattice of PCN‐700. The selective binding of CN^? to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn‐on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine‐tuned in order to maximize the sensitivity of the overall framework. The optimized MOF‐sensor had a CN^?‐detection limit of 0.05 μm , which is much lower than traditional CN^? fluorescent sensors (about 0.2 μm ).     

Copper‐based Metal‐organic Framework for Non‐enzymatic Electrochemical Detection of Glucose

A non‐enzymatic electrochemical glucose sensor based on a Cu‐based metal‐organic framework (Cu‐MOF) modified electrode was developed. The Cu‐MOF was prepared by a simple ionothermal synthesis, and the characterizations of the Cu‐MOF were studied by Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), single‐crystal X‐ray powder diffraction (SCXRD), and X‐ray powder diffraction (XRD). Electrochemical behaviors of the Cu‐MOF modified electrode to glucose were measured by differential pulse voltammetry (DPV). The electrochemical results showed that the Cu‐MOF modified electrode exhibited an excellent electro‐catalytic oxidation towards glucose in the range of 0.06 μM to 5 mM with a sensitivity of 89 μA/mM cm² and a detection limit of 10.5 nM. Moreover, the fabricated sensor showed a high selectivity to the oxidation of glucose in coexistence with other interferences. The sensor was satisfactorily applied to the determination of glucose in urine samples. With the significant electrochemical performances, MOFs may provide a suitable platform in the construction of kinds of electrochemical sensors and/or biosensors and hold a great promise for sensing applications.     

Turn‐On Luminescence Sensing and Real‐Time Detection of Traces of Water in Organic Solvents by a Flexible Metal–Organic Framework

The development of efficient sensors for the determination of the water content in organic solvents is highly desirable for a number of chemical industries. Presented herein is a Mg²⁺ metal–organic framework (MOF), which exhibits the remarkable capability to rapidly detect traces of water (0.05–5 % v/v) in various organic solvents through an unusual turn‐on luminescence sensing mechanism. The extraordinary sensitivity and fast response of this MOF for water, and its reusability make it one of the most powerful water sensors known.     

Stepwise Assembly of Turn-on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn-on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene-based fluorescent linker and a hemicyanine-containing CN⁻-responsive linker were sequentially installed into the lattice of PCN-700. The selective binding of CN⁻ to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn-on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine-tuned in order to maximize the sensitivity of the overall framework. The optimized MOF-sensor had a CN⁻-detection limit of 0.05 μm , which is much lower than traditional CN⁻ fluorescent sensors (about 0.2 μm ).     

A Novel Electrochemical Sensor Based on Copper‐based Metal‐Organic Framework for the Determination of Dopamine

A glassy carbon electrode (GCE) modified with a copper‐based metal‐organic framework (MOF) [HKUST‐1, HKUST‐1 = Cu₃(BTC)₂ (BTC = 1,3,5‐benzenetricarboxylicacid)] was developed as a highly sensitive and simple electrochemical sensor for the determination of dopamine (DA). The MOF was prepared by a hydrothermal process, and the morphology and crystal phase of the MOF were characterized by scanning electron microscopy (SEM) and X‐ray diffraction (XRD), respectively. Meanwhile, the electrochemical performance was investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Under optimized conditions, the modified electrode showed excellent electrocatalytic activity and high selectivity toward DA. The linear response range was from 5.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M and the detection limit was as low as 1.5 × 10⁻⁷ M. Moreover, the electrochemical sensor was used to detect DA in real samples with excellent results. MOF‐based sensors hold great promise for routine sensing applications in the field of electrochemical sensing.     

Monodentate AIEgen Anchored on Metal‐Organic Framework for Fast Fluorescence Sensing of Phosphate

Herein, a novel sensor (TPE‐UiO‐66) was designed via anchoring monodentate tetraphenylethylene (TPE) onto UiO‐66 framework. The combination of the distinct aggregation‐induced emission (AIE) of TPE and the easy replacement of monodentate linker by guest phosphate, makes TPE‐UiO‐66 an ideal platform for sensing HPO₄^2–. Experimental results indicate that TPE‐UiO‐66 can selectively sense HPO₄^2– from other common anions. The limit of detection (LOD) can reach to 5.56 μmol·L^–1 and more importantly, TPE‐UiO‐66 also exhibits an ultra‐fast equilibrium response of 2 min, far faster than those of other sensors especially for UiO‐66‐NH₂. The combination of experimental analysis and density functional theory (DFT) calculations demonstrates that the high selectivity, high sensitivity and fast response of HPO₄^2– detection by TPE‐UiO‐66 can be attributed to the stronger coordination interactions of HPO₄^2– with Zr‐O cluster of UiO‐66 than that of TPE molecule. This study not only provides a potential probe for phosphate, but also represents a novel strategy to design stimuli‐responsive fluorescent MOF‐based sensors via using monodentate AIEgens.     

A Water‐Stable Terbium(III)–Organic Framework as a Chemosensor for Inorganic Ions,Nitro‐Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro‐compounds, excessive Fe³⁺ and MnO₄^?, is crucial for human health and environmental protection. Here, a new terbium(III)–organic framework, namely [Tb(TATAB)(H₂O)]?2H₂O ( Tb‐MOF , H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐m‐aminobenzoic acid), was assembled and characterized. The Tb‐MOF exhibits a water‐stable 3D bnn framework. Due to the existence of competitive absorption, Tb‐MOF has a high selectivity for detecting Fe³⁺, MnO₄^?, 4‐nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb‐MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III‐based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro‐compounds, and antibiotics simultaneously.     

HFIP-Functionalized Co3O4 Micro-Nano-Octahedra/rGO as a Double-Layer Sensing Material for Chemical Warfare Agents

Semiconductor metal oxides (SMO)-based gas-sensing materials suffer from insufficient detection of a specific target gas. Reliable selectivity, high sensitivity, and rapid response–recovery times under various working conditions are the main requirements for optimal gas sensors. Chemical warfare agents (CWA) such as sarin are fatal inhibitors of acetylcholinesterase in the nerve system. So, sensing materials with high sensitivity and selectivity toward CWA are urgently needed. Herein, micro-nano octahedral Co₃O₄ functionalized with hexafluoroisopropanol (HFIP) were deposited on a layer of reduced graphene oxide (rGO) as a double-layer sensing materials. The Co₃O₄ micro-nano octahedra were synthesized by direct growth from electrospun fiber templates calcined in ambient air. The double-layer rGO/Co₃O₄-HFIP sensing materials presented high selectivity toward DMMP (sarin agent simulant, dimethyl methyl phosphonate) versus rGO/Co₃O₄ and Co₃O₄ sensors after the exposure to various gases owing to hydrogen bonding between the DMMP molecules and Co₃O₄-HFIP. The rGO/Co₃O₄-HFIP sensors showed high stability with a response signal around 11.8 toward 0.5 ppm DMMP at 125 °C, and more than 75 % of the initial response was maintained under a saturated humid environment (85 % relative humidity). These results prove that these double-layer inorganic–organic composite sensing materials are excellent candidates to serve as optimal gas-sensing materials.     

Cd-Based Metal–Organic Framework for Selective Turn-On Fluorescent DMSO Residual Sensing

Dimethyl sulfoxide (DMSO) is a universally used solvent in various synthetic reactions, and trace amounts of DMSO residual are often seen on the surface of chemical product. It is difficult to quickly determine whether the residual DMSO is washed completely. This work reports a Cd^II metal–organic framework (MOF) SXU-4 which can detect trace amounts of DMSO in various solvents. Fluorescence experiments reveal its turn-on fluorescence effect toward DMSO with high selectivity and sensitivity, indicating that it can be used as an effective luminescent probe for rapid chemical product purity detection by testing the washing solution. Crystallographically characterized DMSO loaded SXU-4 (DMSO@ SXU-4 ), in combination with computational results uncover that the enhanced DMSO–MOF conjugation through multiple DMSO–MOF supramolecule interactions and charge rearrangement are the main causes of fluorescence intensification.     

A selective turn-on fluorescent sensor for Fe and application to bioimaging

A novel compound FD1 was demonstrated as a turn-on fluorescent sensor for imaging of iron(III) ion in biological samples. Based on the spirolactam (nonfluorescence) to ring-open amide (fluorescence) equilibrium, FD1 exhibited high selectivity and sensitivity for Fe³⁺ over other metal ions. Moreover, fluorescent microscopy experiments further established that FD1 could be used for sensing Fe³⁺ within living cells.     

Applications of metal nanoparticles/metal-organic frameworks composites in sensing field

Metal nanoparticles (MNPs) possess size-dependent desirable electronic and optical properties while metal-organic frameworks (MOFs) have an edge over extremely large specific surface areas, homogeneous structure, high porosity and remarkable chemical stability. Their combination (MNPs/MOFs) is a novel nanomaterial with broad application prospect in sensing field. To improve performance in sensing applications, we have paid great attention to synergistic effects between the two compositions above. Because of the synergistic effects between MNPs and MOFs, sensors on the basis of MNPs/MOFs composites show significant sensing enhancement with respect to stability, selectivity and sensitivity. In this review, various applications for MNPs/MOFs composites in electrochemical sensing, fluorescent sensing, colorimetric sensing, surface-enhanced Raman scattering sensing and chemiluminescence/electrochemiluminescence sensing are focused and summarized. Besides, the synergistic interactions between MNPs and MOFs was investigated. Finally, based on theoretical information from the reports as well as experimental experience, this review offers the challenges and opportunities for future research on MNPs/MOFs composites.     

A near-infrared fluorescence turn-on sensor for sulfide anions

The first NIR fluorescent sensor for sulfide anions was constructed based on the displacement approach. The sensing ensemble is composed of a cyanine dye, a piperazine linker, an 8-aminoquinoline ligand, and copper. The favorable attributes of the sensor include a large NIR fluorescence turn-on signal in aqueous ethanol, high sensitivity, and high selectivity. The transition-metal-based displacement strategy may open an avenue for development of NIR fluorescent sensors for a wide variety of anion targets.     

Function-Oriented: The Construction of Lanthanide MOF Luminescent Sensors Containing Dual-Function Urea Hydrogen-Bond Sites for Efficient Detection of Picric Acid

Two novel lanthanide metal–organic framework (Ln-MOF) luminescent sensors for the detection of picric acid have been successfully assembled. Following a function-oriented strategy, urea hydrogen-bonding functional sites were introduced into two MOF frameworks. A structural analysis indicated that the two MOFs have the exact same structure, namely 2D layers with diamond-shaped holes that are accumulated into a 3D framework through the hydrogen-bonding interactions between urea and carboxylate groups. Interestingly, only half of the urea units are involved in supporting the MOF framework through N−H⋅⋅⋅O hydrogen-bonding interactions, whereas the other half are located in the pore channel and act as empty recognition sites. Abundant N−H urea bonds are present in the inner walls of three types of interpenetrating 1D channels. Luminescence studies revealed that the two Ln-MOFs exhibit high sensitivity, good selectivity, and a fast luminescence quenching response towards picric acid. In particular, the two Ln-MOFs can be simply and quickly regenerated, and exhibit excellent recyclability. In summary, we have successfully used a function-oriented strategy to achieve multiple functions in a ligand to construct lanthanide MOF luminescent sensors for the detection of picric acid, thereby providing a potential strategy for the future development of MOF luminescent sensors with a specific target.     

DFT/MRCI assessment of the excited-state interplay in a coumarin-schiff Mg2+ fluorescent sensor

Fluorescent sensors with selectivity and sensitivity to metal ions are an active field in supramolecular chemistry for biochemical, analytical, and environmental problems. Mg²⁺ is one of the most abundant divalent ions in the cell, and it plays a critical role in many biological processes. Coumarin-based sensors are widely used as desirable fluorophore and binding moieties showing a remarkable sensitivity and fluorometric enhancement for Mg²⁺. In this work, density functional theory/multireference configuration interaction (DFT/MRCI) calculations were performed in order to understand the sensing behavior of the organic fluorescent sensor 7-hydroxy-4-methyl-8-((2-(pyridin-2-yl)hydrazono)methyl)-2H-chromen-2-one (PyHC) in ethanol to solvated Mg²⁺ ions. The computed optical properties reproduce well-reported experimental data. Our results suggest that after photoexcitation of the free PyHC, a photo-induced electron transfer (PET) mechanism may compete with the fluorescence decay to the ground state. In contrast, this PET channel is no longer available in the complex with Mg²⁺ making the emissive decay more efficient. © 2019 Wiley Periodicals, Inc.     

A novel fluorescent indicator displacement assay for sensing the anticancer drug gefitinib

Fluorescent indicator displacement assays have become popular for converting synthetic receptors into optical sensors. We have now shown that a 1:2 host–guest complex between cucurbit[8]uril (Q[8]) and proflavine (PF) can be used as a fluorescent indicator for sensing the anticancer drug gefitinib. The 2PF@Q[8] complex can be used to detect gefitinib with high selectivity using fluorescence spectrometry with a detection limit of 6.63 × 10^?8 mol^?L. The proposed sensing mechanism was investigated using ¹H nuclear magnetic resonance spectroscopy (¹H NMR), isothermal titration calorimetry and electrospray ionisation mass spectrometry. The 2PF@Q[8] complex was shown to be suitable for imaging gefitinib in prostate cancer (PC3) cells, which may help to elucidate relevant biological processes at the molecular level. We have developed a novel F-IDA to detect the anticancer drug GEF with high selectivity. The new indicator has excellent selectivity and a low detection limit for GEF. We have also demonstrated that the F-IDA can be used for the practical determination of drugs in living cells.     

Ionic liquids as precursors for highly luminescent,surface-different nitrogen-doped carbon dots used for label-free detection of Cu/Fe and cell imaging

Carbon nanodots (C-Dots) have attracted much attention in recent years due to their low cost, ready scalability, excellent chemical stability, biocompatibility and multicolor luminescence. Here, we report a facile strategy for producing highly luminescent, surface-different nitrogen-doped carbon dots (C-Dots) by using different ionic liquids (ILs). Intriguingly, the surface-different C-Dots show different selectivity for Cu²⁺ and Fe³⁺. To the best of our knowledge, this is the first example which shows that ILs are excellent precursors for producing luminescent nanomaterial used for detection of different metal ions. The resultant nitrogen-doped C-Dots are highly photoluminescent and can be used for multicolor bioimaging. Most notable, by taking different ILs as precursors, we obtain surface-different C-Dots, which can be directly used for selective detection of Cu²⁺ and Fe³⁺ without any modification. These C-Dots based sensors exhibit high sensitivity and selectivity and the sensing process can be easily accomplished with one-step rapid operation. More importantly, compared with other method using QDs, organic dyes and organic solvent, this strategy is much more eco-friendly. This work may offer a new approach for developing low cost and sensitive C-Dots-based sensors for biological and environmental applications.