树枝状十二酯的合成

以乙二胺和丙烯酸十二酯为原料，甲醇为溶剂，采用迈克尔加成反应合成了低代的树枝状十二酯。探讨了反应条件对树枝状十二酯收率的影响。乙二胺2mL(30mmol)，n(乙二胺)：n(丙烯酸十二酯)=1：6，甲醇占反应液总体积的50％，反应温度40℃，反应时间48h，产率54．9％。     

树枝状尼龙6的合成与研究

用单羧基封端的尼龙6分别与树枝状聚酰胺-胺(PAMAM)的G1代和G2代外围活泼氨基进行缩聚反应,合成出具有规整结构的由核心向外发散增长的树枝状尼龙6,采用红外光谱、扫描电镜、DSC和TGA对缩聚物进行了分析。     

树枝状偶氮液晶高分子(PAMAM-MMAZO)的合成及表征

树枝状偶氮液晶高分子(PAMAM-MMAZO)的合成及表征;树枝状聚酰胺-胺;树枝状偶氮液晶;表面修饰;液晶性     

新型树枝状PNP铬催化剂的合成及催化性能

以1.0代聚酰胺-胺(PAMAM)为配体骨架,氯代二苯基膦为原料,通过取代反应合成了1种含有较大空间位阻的新型树枝状PNP配体,再以Cr Cl3(THF)3为络合试剂,通过络合反应合成树枝状PNP铬催化剂.采用傅里叶变换红外光谱(FTIR)、紫外-可见分光光度计(UV-Vis)、核磁共振波谱(NMR)、电喷雾电离质谱(ESI-MS)和元素分析等手段证实合成的新型树枝状PNP配体及其铬催化剂的结构与理论设计的结构一致.以甲基铝氧烷(MAO)为助催化剂,对乙烯齐聚反应进行了研究,考察了溶剂种类、反应温度、反应压力及Al/Cr摩尔比对该催化剂活性和选择性的影响.结果表明,以甲苯为溶剂,MAO为助催化剂,当反应温度为25℃,反应压力为0.9 MPa,Al/Cr摩尔比为500时,该催化剂的活性高达2.15×105g/(mol Cr·h),催化剂对乙烯三聚、四聚反应的选择性共达到36.76%.     

新型树枝状大分子载体在药物研究领域的应用进展

本文介绍了树枝状大分子特别是聚酰胺-胺类在药物研究领域中的应用.从树枝状大分子对疏水性药物的增溶以及缓控释作用等方面重点对聚酰胺-胺进行了分析和总结,并简要介绍了其他种类的树枝状大分子.     

发散法合成树枝状高分子聚酰胺-胺

采用发散法,以乙二胺为原料,通过与丙烯酸甲酯和乙二胺进行Mickeal加成和酰胺化缩合反应,合成了以乙二胺为核、支化代为1.0的树枝状高分子聚酰胺一胺,讨论了反应温度、反应时间和投料摩尔比等因素对反应的影响,同时讨论了该反应的特点。结果表明：适宜的反应温度为25℃,反应时间为24h,投料比为mol0.5代PAMAM：mol乙二胺＝1：24,在此条件下,产品的产率为99.9%,纯度在995以上。     

微波辅助合成法制备聚酰胺-胺树枝状分子修饰的开管毛细管电色谱柱

采用微波辅助合成技术,快速制备以聚酰胺-胺(poly(amidoamine),PAMAM)树枝状分子为固定相的开管毛细管电色谱柱.与常规合成方法相比,微波辅助合成法可以提高反应速度,极大地缩短制备周期.在pH 5.7～8.0范围内, 随着PAMAM树枝状分子代数的增加,毛细管电渗流(EOF)逐步下降.对丙氨酸和脯氨酸进行分离的实验结果表明,随着PAMAM树枝状分子代数的增加,分离度逐步增大,3代PAMAM树枝状分子修饰的毛细管柱具有良好的分离效果.以丙酮标记物连续测定10 d,柱效下降3.85%, 表明采用微波辅助合成技术制得的PAMAM树枝状分子修饰的毛细管柱具有良好的稳定性.     

扇形PAMAM树枝状高分子的合成与表征

树枝状化合物是聚合物合成科学上第一次不采用生物技术合成的结构精确的大分子。它被称为是继线形、交联形、支链形聚合物后的第4种结构类型的高分子。树枝状高分子的合成是通过多官能团基元进行逐步的有机反应而非传统的聚合方法。近年来，除了发散法、收敛法合成以外，     

聚酰胺—胺型树枝状高分子PAMAM溶液的特性粘度

测定了树状高分子ＰＡＭＡＭ（聚酰胺－胺型,乙二胺为内核）及其季铵盐在水溶液中的特性粘度「η」,结果表明,ＰＡＭＡＭ的「η」在代数Ｇ＝２￣３处有最大值,而其季铵盐则在此处有最小值,同时发现高分子的流体力学等效圆球半径Ｒη随Ｇ增大近似线性增长,通过对ＰＡＭＡＭ及其季铵盐特性粘度的研究,揭示了不同代数高分子结构形态的变化规律。     

聚酰胺-胺型树枝状大分子1H和13C-NMR研究

采用发散合成法合成了0．5～3.0代的树枝状大分子聚酰胺-胺，测定了系列聚酰胺-胺的^1H—NMR和^13C—NMR谱，结果表明，合成产物的分子结构与理论结构相符，而^13C—NMR谱的测定结果表明了整代产品中含有少量的原料乙二胺，合理地解释了随着支化代的增加，收率超过100％这一实验现象．     

Synthesis and characterization of new epoxy and cyanate ester resins

New epoxide and cyanate ester resins with an aromatic ester backbone namely 1,3-[di-(4-glycidyloxy diphenyl-2,2^′-propane)]-isophthalate (DGDPI) and 1,4-[di-(4-cyanato diphenyl-2,2^′-propane)]-terephthalate (DCDPT) were synthesized and the intermediates were characterized by IR, 1H-/¹³C-NMR spectroscopic methods. The cured products from DGDPI and DHDPI exhibited higher T_g compared with standard epoxy system. The increase in the T_g may be due to the cyanate ester and rigid aromatic backbones present in the curing system.     

松香树脂酸乙烯酯的研究 第二报:松香树脂酸乙烯酯组成与结构的研究

本文研究了国产特级松香树脂酸乙烯酯的组成与各级分的分子结构：结果表明国产特级松香树脂酸乙烯酯的主要成分是枞酸乙烯酯、长叶松酸乙烯酯和去氢枞酸乙烯酯，三者间重量比为11：3：2；其连接在羧基上的乙烯基在核磁共振谱图中呈现为很好的ABX系统。     

Separation,identification, and structural characterization of sucrose ester isomers from tobacco

Sucrose esters (SEs) are crucial tobacco smoke flavor precursors and play a significant role in tobacco's functionality. Due to their structural complexity, the separation and analysis of SEs in tobacco remain a major challenge, and massive structures of SEs have not yet been fully identified. In this study, the fractions enriched in SEs were obtained from oriental and flue-cured tobacco through a series of pretreatments, and two types of SEs (Types I and II) were distinguished by liquid chromatography-tandem mass spectrometry (LC-MSⁿ) analysis, with Type II SEs newly characterized in tobacco. Five groups of main SEs were further purified using preparative high-performance LC (HPLC) coupled to an evaporative light scattering detector, and their structures were characterized by nuclear magnetic resonance spectrometry techniques including ¹H, ¹³C, correlation spectroscopy, heteronuclear single quantum correlation, and heteronuclear multiple bond correlation. By combining LC-MSⁿ and nuclear magnetic resonance spectrometry, the structures of eight SE isomers were finally proposed, of which four were newly identified. These findings further enhance the understanding of the structural diversity of SEs in tobacco, serving as a valuable reference for future research on the elucidation, synthesis, and metabolism of SEs.     

Synthesis and characterization of poly(itaconate ester)s with etheric side chains

The synthesis and characterization of poly(itaconate ester)s with short poly(ethylene oxide) side chains have been studied. It was found that the monomer syntheses via esterification of itaconic acid resulted in incomplete esterification leaving up to 35 mol % monomers with carboxylic acid functionality. These acid groups were then incorporated into the polymers. This acid incorporation has not previously been reported, nor have the properties of the copolymers been studied. Techniques were developed to effectively remove the acid impurities to generate pure homopolymers. Titration and gas chromatographic techniques were developed to study the amount of acid impurity in the monomers, and titration was also used to characterize the polymers. Size exclusion chromatography and differential scanning calorimetry were used to study both the homopolymers and copolymers. It was found that the location and breadth of the glass transition is a function of acid content. Finally, isomerization of the itaconate monomers to the inactive mesaconate was also found to be a problem during the synthesis. Pure mesaconate and citraconate monomers were synthesized and characterized by ¹H-NMR. © 1993 John Wiley & Sons, Inc.     

Synthesis and structural characterization of novel pyranoluteolinidin dyes

The synthesis and structural characterization by LC–MS and NMR of novel pyranoluteolinidin derivatives are reported. The compounds result from the reactions between luteolinidin and three different carboxylic acids in wine model-like solutions. The three pigments possess different substituents attached to the D ring (methyl, catechol and dimethylaminophenyl groups) and the same catechol group in the B ring, yielding a wide spectrum of colors from yellow to pink-purple.     

Synthesis and characterization of new phosphorus and other heteroatom containing aryl cyanate ester monomers and networks

Several aromatic dicyanate monomers have been synthesized bearing para-linked strong electron withdrawing groups, such as phenylphosphine oxide, sulfone, and carbonyl. These groups increased the reactivity of the cyanate functional groups and eliminated the need for curing catalysts. However, an undesirable decrease in the processing window between the monomer melting point and the onset of cure was also generally observed. An arylene ether phenyl phosphine oxide system was designed that displayed several attractive characteristics such as a low softening point, a wide processing window, cure with no catalyst, high T_g and high char yield in air, suggesting that these new thermosets might show good fire resistance. The dicyanate ester monomers were synthesized in high yield by reacting various bisphenols with cyanogen bromide in the presence of triethylamine. The high reactivity of the cyanate functional groups required that the cyanation reaction be conducted at temperature below 0°C in order to prevent imidocarbonate side reactions. Proton NMR and FT-IR were used to characterize these monomers. The cyclotrimerization curing process was monitored by the disappearance of the carbon-nitrogen triple bond stretch (2270 cm⁻¹). An optimal cure schedule was determined and the cured polycyanurate networks were characterized by DSC, DMTA, and TGA. Tg values were typically > 250°C and 5% weight loss values were observed by TGA in air above 400°C. Several of the dicyanate monomers with sufficiently large processing windows were cured into single lap shear adhesive bonds onto titanium 6/4 and the measurements are reported herein. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 977–987, 1997     

Hyperbranched polycarbosiloxane with dendritic boron cores: Synthesis,characterization, and structure regulation

The synthesis, characterization, and structure regulation of hyperbranched polycarbosiloxane with dendritic boron cores were realized in this paper. First, dendritic boron core was synthesized via hydroboration with borane dimethylsulfide and bis(allyloxy)dimethylsilane. Then, the hyperbranched polycarbosiloxanes with dendritic boron cores were synthesized via hydrosilylation with AB₂ type monomer of bis(allyloxy)methylsilane and dendritic boron cores. The molecular structures of the dendritic boron core and resulting hyperbranched polymers were characterized by using Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance spectroscopies. Size exclusion chromatography/multiangle laser light scattering analysis reveals that the structures of hyperbranched polycarbosiloxane can be regulated effectively by incorporation of functional dendritic boron cores. Compared with hyperbranched polycarbosiloxane of the same molecular weight level, the hyperbranched polycarbosiloxane with dendritic boron cores presents narrower molecular weight distribution as well as much smaller hydrodynamic radius and intrinsic viscosity. Thermalgravimetric analyzer analysis indicates that both the decomposition temperature and ceramic yields are increased as the results of the incorporation of dendritic boron cores into hyperbranched polycarbosiloxane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3930–3941, 2006     

歧化松香树脂酸乙烯酯组成与结构的研究

本文研究了国产歧化松香乙烯酯的组成与各组分的分子结构，结果表明国产歧化松香乙烯酯的主要成分是二氢枞酸和脱氮枞酸的乙烯酯，二者重量比为3∶4；其乙烯酯上的乙烯基在核磁共振谱图中呈现为很好的ABX系统；因为二氢枞酸有三个异构体，所以仅用光谱方法无法确定二氧枞酸乙烯酯环内双键的位置。