A novel method to calculate the approximate derivative photoacoustic spectrum using continuous wavelet transform

A novel method based on continuous wavelet transform (CWT) using Haar wavelet function for approximate derivative calculation of analytical signals is proposed and successfully used in processing the photoacoustic signal. An approximate nth derivative of an analytical signal can be obtained by applying n times of the wavelet transform to the signal. The results obtained from four other different methods--the conventional numerical differentiation, the Fourier transform method, the Savitzky-Golay method, and the discrete wavelet transform (DWT) method--were compared with the proposed CWT method; it was demonstrated that all the results are almost the same for signals without noise, but the proposed CWT method is superior to the former four methods for noisy signals. The approximate first and second derivative of the photoacoustic spectrum of Pr(Gly)3Cl3.3H2O and PrCl3.6H2O were obtained using the proposed CWT method; the results are satisfactory.     

Approximate derivative calculated by using continuous wavelet transform

A novel method of calculating approximate derivative of signals in analytical chemistry by using the continuous wavelet transform (CWT) is proposed. As compared with numerical differentiation, FT method and DWT method, fast calculation, and simple mathematical operation are remarkable advantages of CWT method. The signal-to-noise ratio (SNR) of approximate derivative of signals calculated by CWT method is easily enhanced only through appropriately adjusting the dilation, even in the case of very low SNR. Therefore, CWT method is a powerful tool for performing the approximate derivative calculation of signals in analytical chemistry. Additionally, the approximate second derivative evaluated via CWT method can be used to determine the peak potentials of the overlapping square wave voltammogram (SWV) of Cd(II) and In(III), and the results are very satisfactory.     

A novel method to calculate the approximate derivative photoacoustic spectrum using continuous wavelet transform

A novel method based on continuous wavelet transform (CWT) using Haar wavelet function for approximate derivative calculation of analytical signals is proposed and successfully used in processing the photoacoustic signal. An approximate nth derivative of an analytical signal can be obtained by applying n times of the wavelet transform to the signal. The results obtained from four other different methods – the conventional numerical differentiation, the Fourier transform method, the Savitzky-Golay method, and the discrete wavelet transform (DWT) method – were compared with the proposed CWT method; it was demonstrated that all the results are almost the same for signals without noise, but the proposed CWT method is superior to the former four methods for noisy signals. The approximate first and second derivative of the photoacoustic spectrum of Pr(Gly)₃Cl₃· 3 H₂O and PrCl₃· 6 H₂O were obtained using the proposed CWT method; the results are satisfactory. Received: 21 December 1999 / Revised: 28 February 2000 / Accepted: 7 March 2000     

Translation Modification Iteration for Resolution and Quantification of Overlapping Chromatographic Peaks

A novel algorithm, translation modification iteration (TMI), is proposed for resolving overlapping chromatographic peaks. By this method, a series of similar peaks are obtained from the initial construction of single component peaks and approach the profiles of real single component peaks by iteration. Both simulated and experimental data are investigated with TMI, consequently overlapping peaks can be resolved into reasonable single component peaks easily and efficiently. Quantitative analysis is also successfully achieved in both simulated and experimental data, and the quantitative results obtained from TMI are superior to those obtained from perpendicular drop (PD) and tangent skim (TS) methods. Without too much time devoted to the procedure, TMI is a simple and practicable method for resolution and quantification of overlapping chromatographic peaks.

     

Wavelet unfolded partial least squares for near-infrared spectral quantitative analysis of blood and tobacco powder samples

Continuous wavelet transform (CWT) has been shown to be a high-performance signal processing technique in multivariate calibration. However, the signal processed by CWT with a specific wavelet may account for only a part of the information. To effectively utilize more abundant information contained in analytical signals, a method, named as wavelet unfolded partial least squares (WUPLS), was proposed. In the approach, the measured dataset is firstly extended by CWT with different wavelets, and then partial least squares (PLS) is employed to develop the quantitative model between the extended dataset and the target values. In order to select the representative wavelets, principal component analysis (PCA) is used to investigate the distribution of the signals obtained by CWT with different wavelets. The performance of the method was tested with blood and tobacco powder samples. Compared with the results obtained by PLS methods, the WUPLS method combined with signal processing techniques is proven to be a promising tool for improving the near-infrared (NIR) spectral analysis of complex samples.     

小波变换用于植物激素重叠色谱峰中组分的定量分析

根据小波变换将信号按频率大小分解的性质，作者提出了一种用小波变换直接提取重叠色谱峰中单一组分信息的方法，并将其应用于植物激素混和体系重叠峰的解析与定量分析。结果表明：单组分的色谱信号经小波变换分解后仍能保持原有的线性关系，用小波变换从重叠信号中提取的单一组分信息也具有良好的线性关系。     

A new application of continuous wavelet transform to overlapping chromatograms for the quantitative analysis of amiloride hydrochloride and hydrochlorothiazide in tablets by ultra-performance liquid chromatography

A new application of continuous wavelet transform (CWT) to overlapping peaks in a chromatogram was developed for the quantitative analysis of amiloride hydrochloride (AML) and hydrochlorothiazide (HCT) in tablets. Chromatographic analysis was done by using an ACQUITY ultra-performance LC (UPLC) BEH C18 column (50 x 2.1 mm id, 1.7 pm particle size) and a mobile phase consisting of methanol-0.1 M acetic acid (21 + 79, v/v) at a constant flow rate of 0.3 mL/min with diode array detection at 274 nm. The overlapping chromatographic peaks of the calibration set consisting of AML and HCT mixtures were recorded rapidly by using an ACQUITY UPLC H-Class system. The overlapping UPLC data vectors of AML and HCT drugs and their samples were processed by CWT signal processing methods. The calibration graphs for AML and HCT were computed from the relationship between concentration and areas of chromatographic CWT peaks. The applicability and validity of the improved UPLC-CWT approaches were confirmed by recovery studies and the standard addition technique. The proposed UPLC-CWT methods were applied to the determination of AML and HCT in tablets. The experimental results indicated that the suggested UPLC-CWT signal processing provides accurate and precise results for industrial QC and quantitative evaluation of AML-HCT tablets.     

小波包分析用于重叠分析化学信号的处理

对小波包分析的算法进行了改进,并将此算法成功地应用于多组分重叠色谱信号的解析.结果表明,本文提出的算法解决了MRSD算法的不足,更适合处理分析化学信号,用于重叠信号的解析时不需重构(逆变换),简化了数据处理步骤,加快了数据解析速度,具有较强的解析能力.对于重叠色谱信号的解析,小波包分析比小波分析具有更强的解析能力.     

Study on spline wavelet self‐convolution in filtering and resolving overlapped voltammetric signals simultaneously

The normal distribution function is used as resolving factor and spline wavelet self‐convolution is used to resolve the overlapped peaks containing noise. The resolution of several kinds of overlapped peaks (SNR from 5 to 50) simulated by computer has been discussed in details. It is known that the overlapped peaks with noise can be separated (SNR > 50) directly and the noise is removed at the same time in time domain. Base‐line separation can be achieved. The relative errors of peak area and position are less than 5.0%. The satisfactory results are also obtained in resolving voltammetric overlapped signals by this method.     

连续样条小波变换用于分解重叠峰的研究

以B-样条小波为分析小波，提出了用于分析化学重叠信号解析的新方法——连续样条小波变换，结果表明：连续样条小波变换应用于分析化学信号的处理，能使峰变窄同时还能提高信号的信噪比，是一种新型有效的重叠信号解析方法，能从含噪声重叠信号中直接得到重叠峰的峰数目及其相应的峰位置。     

Spline wavelet in the resolution of overlapping voltammetric peaks

Spline wavelet transform is used to resolve overlapping voltammetric peaks. A suitable resolving factor is chosen to multiply the filters of spline wavelet and make it a peak resoluter. Simulated overlapping voltammetric peaks are processed by the peak resoluter and satisfactory results are obtained. Base-line separation can be achieved, the relative errors of peak position are less than 3.0%, and the relative errors of peak area are less than 5.0%. The effect of different resolving factors and spline wavelet basis are discussed. To test the procedure, two systems, cadmium (Ⅱ)-indium (Ⅲ) and lead (Ⅱ)-thallium (Ⅰ), are used.     

Resolution of Overlapped Capillary Electrophoresis Peaks by Using Heuristic Evolving Latent Projections to Quantify Chloroquine Phosphate and Promethazine Hydrochloride

Chloroquine phosphate and promethazine hydrochloride are two main components in compound reserpine tablets. It is difficult to separate the two compounds with capillary electrophoresis (CE). Heuristic evolving latent projections (HELP) is a chemometric algorithm which is suitable for resolving overlapped peaks from CE and HPLC. In this paper, HELP was applied to resolving the completely overlapped peaks of chloroquine phosphate and promethazine hydrochloride from CE. Mathematical separation and satisfactory quantification results can be achieved easily without too much time involved in the procedure.     

H-point standard additions method for resolution of overlapped chromatographic peaks with a conventional fluorescence detector. Determination of phenol and cresols in waters

Summary The H-Point Standard Additions Method (HPSAM) is proposed in order to resolve overlapping peaks in liquid chromatography by using a conventional fluorescence detector. The method uses as analytical signals the heights or the areas obtained at two previously selected emission wavelengths, and good results are obtained for highly overlapping peaks with highly overlapping fluorescence spectra. The principal benefits of the method are the ease of finding the required wavelengths, its insensitivity to changes in the retention time of the peak from one injection to another, and the possibility of using it in highly or only partially overlapping peaks. We have applied the method to the determination of phenol and cresols in water, resolving by the proposed method the overlapping peaks ofm- andp-cresol.     

基于分形理论分辨重叠峰的新算法

将分形理论用于仪器分析信号的解析,提出一种面向分析谱图中重叠信号处理的分形分辨算法.通过对信号进行分形分析,采用分形维数可有效地反映信号的特征,准确地得到谱峰个数和位置的信息,避免人为判断的误差,实现重叠复合信号的分辨.实验表明,这种新的重叠谱峰分辨法能用于光谱、电化学、色谱等仪器分析数据的处理     

Maximum spectrum of continuous wavelet transform and its application in resolving an overlapped signal

To estimate the number of peaks and to find the individual peak positions in an overlapped signal, a new method called maximum spectrum of continuous wavelet transform (MSCWT) was developed by extracting the maximum coefficients of continuous wavelet transform (CWT). The peak position in MSCWT was the same as that in its original signal. In this process, CWT was performed not on a single dilation but on an appreciation dilation range. To obtain such a range, a new criterion was introduced to choose a center dilation, which was used to form the dilation range. If Cdilation denoted the center dilation, the proper dilation range was [Cdilation -6 +/- 2, Cdilation +1 +/- 1]. The Mexican Hat function was an analytical wavelet. Utilizing the information of the peak number and the position detected by MSCWT, a fitting route was performed to recover the original signal. One simulated and four true overlapped signals, including high performance liquid chromatography (HPLC), ultraviolet-visible (UV) spectrum, and differential pulse voltammetric (DPV), were processed, and the results indicated that MSCWT could detect an overlapped peak number and position, and the curve fitting based on information of MSCWT had a higher accuracy. The proposed method was an efficient one in resolving different types of overlapped signals.     

Application of the wavelet method for the simultaneous quantitative determination of benazepril and hydrochlorothiazide in their mixtures

The discrete and continuous wavelet transforms were applied to the overlapping signal analysis of the ratio data signal for simultaneous quantitative determination of the title subject compounds in samples. The ratio spectra data of the binary mixtures containing benazepril (BE) and hydrochlorothiazide (HCT) were transferred as data vectors into the wavelet domain. Signal compression, followed by a 1-dimension continuous wavelet transform (CWT), was used to obtain coincident transformed signals for pure BE and HCT and their mixtures. The coincident transformed amplitudes corresponding to both maximum and minimum points allowed construction of calibration graphs for each compound in the binary mixture. The validity of CWT calibrations was tested by analyzing synthetic mixtures of the investigated compounds, and successful results were obtained. All calculations were performed within EXCEL, C++, and MATLAB6.5 softwares. The obtained results indicated that our approach was flexible and applicable for the binary mixture analysis.     

Resolution of overlapping capillary electrophoresis peaks by using chemometric analysis: quantification of the components in compound reserpine tablets

The application of multivariate curve resolution with alternating least squares (MCR-ALS) methods to second-order data from capillary electrophoresis with diode array detector (CE-DAD) is reported. Initial qualitative solutions obtained by evolving factor analysis (EFA) and pure-variable detection method can be further optimized by a simultaneous analysis of multiple electrophoresis run data with ALS regression. While unknown samples are analyzed simultaneously against the corresponding standards in different composition ratios, the exact amounts of common components in different CE runs can be determined by the traditional calibration curve method, and quantification can thus be achieved. The above methods are applied to the determination of the components in compound reserpine tablets in overlapping peaks from CE. The quantification results are compared with those of the first derivative of the electropherogram method and artificial neural network (ANN) method.     

毛细管电泳信号的小波平滑与去噪

比较了小波去噪与小波平滑方法对毛细管电泳信号处理的差别.结果表明,用平滑方法处理毛细管电泳信号会使峰变宽变低,而用去噪方法处理引起有用信号的变化极小.     

Comparative spectral analysis of veterinary powder product by continuous wavelet and derivative transforms

Comparative simultaneous determination of chlortetracycline and benzocaine in the commercial veterinary powder product was carried out by continuous wavelet transform (CWT) and classical derivative transform (or classical derivative spectrophotometry). In this quantitative spectral analysis, two proposed analytical methods do not require any chemical separation process. In the first step, several wavelet families were tested to find an optimal CWT for the overlapping signal processing of the analyzed compounds. Subsequently, we observed that the coiflets (COIF-CWT) method with dilation parameter, a=400, gives suitable results for this analytical application. For a comparison, the classical derivative spectrophotometry (CDS) approach was also applied to the simultaneous quantitative resolution of the same analytical problem. Calibration functions were obtained by measuring the transform amplitudes corresponding to zero-crossing points for both CWT and CDS methods. The utility of these two analytical approaches were verified by analyzing various synthetic mixtures consisting of chlortetracycline and benzocaine and they were applied to the real samples consisting of veterinary powder formulation. The experimental results obtained from the COIF-CWT approach were statistically compared with those obtained by classical derivative spectrophotometry and successful results were reported.     

小波变换用于色谱重叠峰的解析

利用小波变换的时频局部化性质，通过对色谱重叠峰信号小波变换后的某些频率段进行放大，使重叠谱峰得到了分离，并将此方法用于苯和甲苯二组分色谱体系的定量分析，重叠峰中各组分均得到了良好的线性关系及令人满意的定量分析。本文还讨论了不同小波基、分解的次数及放大系数在解析结果的影响。