低频交流电沉积金纳米线阵列的AFM研究

迄今,人们已采用许多方法制备纳米材料,如刻蚀技术、化学法和模板法等［1]．其中,引起科学界广泛兴趣的模板法,在合成有序纳米材料上占有极其重要的地位．常用的模板有两种,一种是有序孔洞阳极氧化铝（Anodic Aluminum Oxide,AAO）模板[2],另一种是含有孔洞无序分布的高分子模板．AAO模板具有耐高温,绝缘性好,孔洞分布均匀有序,而且大小可控等特点［3]．可以利用 AAO模板来制备各种纳米纤维和纳米管,如导电聚合物［4]、金属［5]、半导体［6]、碳［7]和其它一些材料．由于纳米材料的应用具有广阔的前景,如光催化、电化学、酶固定等方面,因而不同材料纳米线的制备备受关     

模板法制备高度有序的聚苯胺纳米纤维阵列

近年来,利用化学或物理方法制备多种材料的纳米有序阵列复合结构已成为学术界的研究热点．用具有纳米孔洞的模板(多孔阳极氧化铝、多孔硅以及聚碳酸脂膜)制备的金属、半导体、碳纳米管等材料的纳米有序阵列复合结构已在润滑、微电极、单电子器件、传感器、垂直磁记录、场致电     

纳米SnO2的制备

ＳｎＯ２在陶瓷、气敏半导体材料及催化剂等方面被广泛应用［１］．纳米级的ＳｎＯ２因具有明显的表面效应而受到关注，其制备方法也受到重视［２］．纳米ＳｎＯ２的制备方法较多，有沉淀法［２］、水热法［３，４］、溶胶－凝胶法［５］、火焰合成法［６］等．然而要制备...     

模板法制备枝状Pt纳米线

一维纳米材料的制备是近年来纳米材料的研究热点. 利用具有纳米尺度的孔洞阵列模板沉积各种材料构筑纳米线的方法具有制备简便和成本较低等优点[1,2]. 常用的模板有多孔阳极氧化铝(AAO)、多孔硅和聚合物等, 其中AAO模板具有耐高温, 绝缘性好, 孔洞分布均匀, 孔径、孔深大小可控等特点, 是模板法研究的热点. 通过模板法电化学沉积制备各种金属纳米线已有很多报道[3～8], 本研究小组也曾报道了模板法电化学沉积Au等纳米线的制备及性质[9～12], 但用该方法制备的金属纳米线都为单一的线状结构. 组成当代大规模集成电路的基本器件一般具有3个或3个以上的电极. 单一的线状结构纳米线, 不能满足纳米电子学对纳米材料和纳米器件性能研究的需要. 在纳米器件的特性研究和探索中, 枝状或Y形纳米结的制备有重要的意义, 它是纳米器件从理论到实用化的必备条件. Sui等[13]用模板法成功制备了枝状碳纳米管, 但用AAO模板制备枝状金属纳米线的研究至今还未见报道. 本文通过控制铝片的阳极氧化条件, 先制备出具有分枝状孔洞结构的AAO模板, 再用电化学法沉积金属Pt, 实现了枝状Pt纳米线的可控生长. 这对其它金属枝状纳米线的制备以及进一步掺杂、构筑纳米原型器件等具有显著的实用价值.     

具有不同层间距、比表面和孔径大小的氧化硅柱层状铌酸的制备

层柱金属氧化物是近年来被开发的新型无机多孔材料［１～６］．水合铌酸是一类独特的固体酸催化剂,通常是非孔性的,且经较高温度热处理后比表面和酸性均很小,从而限制了其在催化领域中的应用［７］．我们［３］曾报道了氧化硅柱层状铌酸的制备,本文则通过进一步改变制备过程中所用氨基丙基三乙氧基硅烷（ＡＰＳ）溶液的浓度、反应温度和时间,获得了一系列具有不同层间距、比表面和孔径的氧化硅柱层状铌酸．１　实验部分ＨＮｂ３Ｏ８·Ｈ２Ｏ的制备见文献［８］．将１ｇＨＮｂ３Ｏ８·Ｈ２Ｏ加入７０ｍＬ不同浓度的ＡＰＳ水溶液中,所得…     

ＴiB2纳米管的模板法制备及表征

ＴiO2纳米材料在太阳能的储存与利用、光电转换、光致变色及光催化降解大气和水中的污染物等方面具有广阔的应用前景,成为重点研究的课题之一^[1~5],目前,以ＴiＯ２纳米粉体和纳米膜的研究较为普遍,而Ｔi o２纳米管的报道不多,由于纳米比纳米膜具有更大的比表面积,因而具有较高的吸附能力,可望提高ＴiO2的光电转换效率,模板法（包括多孔阳极氧化铝膜（ＰＡＡ）、光刻蚀制备垢纳米模板、聚碳酸酯纳米滤膜等）在制备导电聚合物,金属,碳,无机半导体等纳米管或线型材料方面已得到广泛应用^[6~9],在这些模板中,ＰＡＡ模具有均匀分布的重直于表面的相互平行的密集纳米孔,且孔径,孔间距,膜厚可以通过电化学手段加以控制^[10~13]。     

特殊型纳米多孔阳极氧化铝模板的制备

多孔阳极氧化铝(PAA)模板具有六角有序排列的柱形孔,且孔径均匀可调,加之其良好的机械和热稳定性,在纳米材料领域得到了广泛研究和应用。近年来,人们通过改变铝阳极氧化条件制备出了多种特殊型纳米PAA模板,并利用这些模板结合物理或化学方法成功地合成了多种新型纳米功能材料。本文在简要介绍常规纳米PAA模板制备的基础上,较全面地综述了诸如孔道呈分叉形、锯齿形、骨形、倒圆锥形,孔洞呈菱形、三角形、正方形,孔道或孔壁结构呈周期性变化等特殊型纳米PAA模板的制备,揭示了电场强度和电解液种类、温度在PAA孔洞形貌尺寸调控方面的重要性,并展望了这类模板的发展方向及应用前景。     

多孔质铝阳极氧化膜表面与界面研究

铝质材料阳极氧化作为铝质材料最重要的表面改性技术已有几十年历程，并在现代工业中获得了广泛应用［1，’］．前人对铝阳极氧化股的结构、组成及生成机理等进行了大量的研究工作［3－6］，研究结果表明铝阳极氧化膜具有多孔型和壁垒型二种，其中多孔型铝阳极氧化膜是由非晶态     

贵金属多孔纳米结构的模板法制备及生物检测应用

贵金属多孔纳米材料是一类非常重要的新型多功能纳米材料,其具有独特的空心内部、多孔的外壁以及可调的形貌等,表现出优异的光、电、催化等特性。调制贵金属多孔纳米材料的尺寸、形状、排列和空间取向等对促进其在拉曼光谱、生物传感等方面的应用至关重要。模板法是利用与目标产物的纳米尺度特征相匹配的预制结构来指导纳米材料的合成,可以制备出其他方法难以制备的新型多孔纳米结构材料。基于模板的多样性,能够便捷的调节多孔贵金属的孔径、尺寸和组分,充分的开发贵金属纳米结构的特性。本文着重介绍了贵金属多孔纳米材料的类型和调控这些纳米结构的各种模板方法,分析了各种制备方法的优势和不足,并简要综述了贵金属多孔纳米结构在生物检测方面的一些应用进展。     

一种新的制备氧化镍超微粉的方法

氧化镍作为一种功能材料,具有优良的热敏性能,其纳米微粒的热敏性能较常规材料优良,从而显示了超微粒子的奇异特性。氧化镍超微粉的制备主要有胶溶法［１］,配位－沉淀法［２］等。近几年研究发现,以大孔离子交换树脂为模板,可制备纳米超微粒［３］。本文以普通型号...     

无电沉积高密度钯金属纳米线阵列

利用介孔氧化硅薄膜作为模板,通过无电沉积路线在介孔薄膜孔道内合成了高密度钯金属纳米线阵列.利用介孔薄膜导向剂的疏水区作为载体,引进钯金属疏水化合物并经热解和还原,得到钯微粒,以此为催化中心引发无电沉积,避免了传统无电沉积复杂的工艺过程.结果表明,纳米线尺寸均一,长径比大于60,完全填充了介孔薄膜的孔道,并可通过介孔模板孔径的选择对纳米线直径加以调控.     

聚苯胺纳米线电导率的尺寸效应

在前期工作的基础上, 利用导电原子力显微镜法测量单根聚苯胺纳米线的电导率, 探讨了聚苯胺纳米线(PANI nanowine)电导率的尺寸效应, 发现尺寸效应与纳米线的有序性有关.     

Usefulness of Mesoporous Silica as a Template for the Preparation of Bundles of Bi Nanowires with Precisely Controlled Diameter Below 10 nm

The reduction of the diameter of Bi nanowires below 10 nm has been an important target because of the theoretical prediction with regard to significant enhancement in thermoelectric performance by size reduction. In this study, we have demonstrated the usefulness of mesoporous silica with tunable pore size as a template for the preparation of thin Bi nanowires with diameters below 10 nm. Bi was deposited within the templates through a liquid phase deposition using hexane and 1,1,3,3‐tetramethyldisiloxane as a solvent and reducing agent, respectively. Bundles of thin Bi nanowires with non‐crystalline frameworks were successfully obtained after the template removal. The diameter was precisely controlled between about 6 nm and 9 nm. The judicious choices of mesoporous silica and deposition conditions are critical for the successful preparation. The reliable formation of such thin Bi nanowires reported here opens up exciting new possibilities.     

Self-supported particle-track-etched polycarbonate membranes as templates for cylindrical polypyrrole nanotubes and nanowires: an X-ray scattering and scanning force microscopy investigation

Self-supported particle-track-etched polycarbonate membranes with nearly perfect cylindrical pores are used for the preparation of similarly perfect cylindrical polypyrrole nanowires and nanotubes. A complete investigation of the structural properties that result at different stages of the preparation route of polypyrrole nanowires and nanotubes is based on a combination of real and reciprocal space techniques. Nanoporous membranes with nominal pore size ranging from 5 to 150 nm and pore density up to 10(9) pores/cm(2) made from 21-microm-thick polycarbonate films are used. Polypyrrole nanotubes or nanowires are synthesized inside the pores. A real-space picture of the nanomaterial results from scanning force microscopy (SFM) on ultrathin sections made in two directions to obtain structures in the sample surface as well as perpendicular to the surface. From a model-based fit to the small-angle and ultra-small-angle X-ray scattering (SAXS/USAXS) data, the geometric pore structure is obtained and compared to values determined with scanning electron microscopy (SEM). Nanopores, nanowires, and nanotubes are described by uniform solid cylinders or hollow tubes, which are oriented highly parallel to each other and exhibit a small size distribution. Below a critical pore diameter, solid nanowires are produced whereas above this limit hollow nanotubes result.     

Electrochemical synthesis of gallium nanowires and macroporous structures in an ionic liquid

The electrochemical synthesis of gallium nanostructures in an ionic liquid is presented. Gallium nanowires and macroporous structures were synthesized by the template-assisted electrodeposition in the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([Py(1,4)]TFSA) containing GaCl(3) as the precursor. Track-etched polycarbonate membranes with an average pore diameter of 90 nm and a thickness of 21 μm were used as templates for the nanowire synthesis. Ga nanowires with a length of more than 4 μm and an average diameter corresponding to that of the template's pores were easily obtained by this method. Macroporous structures with an average pore diameter of 600 nm were obtained by the electrochemical deposition of Ga inside polystyrene colloidal crystal templates and the subsequent removal of the template by THF. The macroporous deposit showed a granular morphology with smallest grain sizes of about 40 nm and light reflections. The nanostructures of Ga were characterized by HR-SEM and EDX analysis.     

Temperature-Dependent Electrical Conductance of Bi Nanowires

The single crystal bismuth nanowire arrays grown along [0112] with the diameter of 30 nm was synthesized in the pore of anodic aluminum oxide templates through electrodeposi-tion process. The temperature dependent electric conductance of Bi nanowire arrays was measured from 78 K to 320 K. We found that the semimetal-to-semiconductor transition happened around 230 K for 30 nm Bi nanowires oriented along [01112] and the electric con-ductance of the nanowires had a strong temperature dependence.     

Microwave assisted synthesis of manganese mixed oxide nanostructures using plastic templates

The synthesis method for obtaining sub-micrometric structures of rare earth manganese-based mixed oxide compounds is described. Pore wetting of porous polycarbonate templates with the liquid precursor was followed by a two-stage thermal treatment to obtain single phase La_0.325Pr_0.300Ca_0.375MnO₃ hollow and solid structures, with external diameter determined by the sacrificial template pore size. The first thermal stage, a microwave assisted denitration process, determines the shape of the structures. The second treatment, performed at 1073 K, allows to obtain the crystallographic structure of the compound. A variety of techniques (scanning and transmission electron microscopy, scanning probe microscopy) allowed to fully characterize the microstructure and morphology of these self-standing manganite nanostructures. For 1 μm pore size templates we obtained tubes, with external diameter around 800 nm and wall thickness around 150 nm; densely packed nanoparticles sized 20-50 nm are the building blocks of the walls. For pore size below 0.1 μm, solid nanowires were obtained, the size of constituent crystallites being around 10 nm. Overall obtained material exhibits ferromagnetic ordering below 200 K.     

Cu/PAA复合膜的偏振特性

应用扩孔和增大阳极氧化电压的方法制备了不同孔径的多孔铝模板,并以交流电沉积法在该模板沉积铜纳米线.测量了铜/多孔铝复合膜的透射光谱和偏振光谱.实验表明,扩孔和增加阳极氧化电压都使样品的透射率下降,但扩孔不能提高它的偏振性能;提高模板氧化电压则可以提高样品的消光比,且消光比随纳米线直径的增加而增加.     

Template assisted electrodeposition of germanium and silicon nanowires in an ionic liquid

In this paper we report for the first time on the room temperature template synthesis of germanium and silicon nanowires by potentiostatic electrochemical deposition from the air- and water stable ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([Py(1,4)]Tf(2)N) containing GeCl(4) and SiCl(4) as a Ge and Si source, respectively. Commercially-available track-etched polycarbonate membranes (PC) with an average nominal pore diameter of 90-400 nm were used as templates. Ge and Si nanowires with an average diameter corresponding to the nanopores' diameter and lengths of a few micrometres were reproducibly obtained. Structural characterization of the nanowires was performed by EDX, TEM, HR-SEM and Raman spectroscopy. Despite the rough surface of the nanowires, governed mostly by the original shape of the nanopore's wall of the commercially-available PC membrane, preliminary structural characterizations demonstrate the promising prospective of this innovative elaboration process compared to constraining high vacuum and high temperature methods.     

双槽法电沉积Cu/Ni多层纳米线有序阵列

以多孔阳极氧化铝（AAO）为模板，采用双槽法电沉积工艺制得高度有序的Cu/Ni多层纳米线阵列。利用扫描电镜（SEM）和透射电镜（TEM）对Cu/Ni多层纳米线进行了表征，观察到纳米线表面平滑，多层结构清晰，各子层厚度均匀，直径约为 100 nm，与AAO模板孔径基本一致。由选区电子衍射（SAED）照片可知，多层纳米线中Cu层和Ni层均为单晶结构。振动样品磁强计（VSM）测试结果表明，Cu/Ni多层纳米线阵列具有明显的垂直磁各向异性，外加磁场垂直和平行于AAO模板表面时，磁滞回线的矩形比分别为 0.701 和 0.101 ，矫顽力分别为 589 Oe和 202 Oe。通过控制铝阳极氧化工艺及电沉积时间，可获得不同直径、不同子层厚度的Cu/Ni多层纳米线阵列。