Static fatigue fracture of polyethylene: A morphological analysis

The fracture properties of a number of high-density polyethylenes were evaluated and related to their morphology. The resistance to initiation of fracture is related to the resistance to voiding of the materials and the rate of coalescence of voids. The propensity of the materials to void has been shown to be related to the size of the amorphous region. The resistance to propagation of the fracture is also related to the above factors as well as the ease of stretching and rupture of fibrils. The ease of fibril formation has been shown to be related to the degree of perfection of the crystallites.     

Adhesion of modified carbamide-formaldehyde oligomer

The calculation of the work of adhesion is presented for modified adhesive compositions based on Carbamide-formaldehyde resin used to develop plate materials. The modification of synthetic resins by alcohols is proven to reduce their surface tension to the level of the substrate, as well as to increase their ability to stick to a surface, the homogeneity of the distribution due to the particles of filling agents, and the work of adhesion.     

How mobile NMR can help with the conservation of paintings

The conservation of paintings is fundamental to ensure that future generations will have access to the ideas of the grand masters who created these art pieces. Many factors, such as humidity, temperature, light, and pollutants, pose a risk to the conservation of paintings. To help with painting conservation, it is essential to be able to noninvasively study how these factors affect paintings and to develop methods to investigate their effects on painting degradation. Hence, the use of mobile nuclear magnetic resonance (NMR) as a method of investigation of paintings is gaining increased attention in the world of Heritage Science. In this mini-review, we discuss how this method was used to better understand the stratigraphy of paintings and the effect different factors have on the painting integrity, to analyze the different cleaning techniques suitable for painting conservation, and to show how mobile NMR can be used to identify forgeries. It is also important to keep in mind its limitations and build upon this information to optimize it to extend its applicability to the study of paintings and other precious objects of cultural heritage.     

Binding affinity of a small molecule to an amorphous polymer in a solvent. Part 2: preferential binding to local sites on a surface

Crystallization, a separation and purification process, is commonly used to produce a wide range of materials in various industries, and it usually begins with heterogeneous nucleation on a foreign surface in industrial practice and most other circumstances. Recent studies show that amorphous polymeric substrates are useful in controlling crystallization and selectively producing pharmaceutical polymorphs. In our previous publication, we investigated the possible correlation of the binding affinity of one molecule to key binding sites (local binding), and the possibility of using this binding affinity to guide the selection of polymers promoting heterogeneous nucleation. The studied systems were aspirin binding to four nonporous cross-linked polymers in ethanol-water 38 v% mixture. Cross-linked with divinylbenzene (DVB), these polymers were poly(4-acryloylmorpholine) (PAM), poly(2-carboxyethyl acrylate) (PCEA), poly(4-hydroxylbutyl acrylate) (PHBA), and polystyrene (PS). We discovered that the trend of the magnitudes of the average free energies of binding to the best sites is very similar to that of heterogeneous nucleation activities. This Article aims to investigate whether or not local binding to key sites is the important variable to describe heterogeneous nucleation as opposed to the overall/average binding affinity of molecules to a surface, and to investigate the possibility of using the overall binding affinity to guide the selection of polymers. We used the polymer surfaces generated from our previous study to calculate the overall binding affinity of aspirin molecules to the surface as measured by the preferential interaction coefficients of aspirin (1 m) to these polymers. We discovered that the trend of the average preferential interaction coefficients does not correlate as well to that of heterogeneous nucleation activities as the free energies of binding to the best sites. We also computed the average numbers of aspirin molecules associated with the areas of the surfaces' best binding sites and found that they correlate better to heterogeneous nucleation activities than the average preferential interaction coefficients. These results further support that local binding is indicative of heterogeneous nucleation. Moreover, we found a weak trend of the distance order parameters of the aspirin molecules to be similar that of heterogeneous nucleation activities. Our results from the two-part study suggest the importance of local binding to heterogeneous nucleation as well as the possibility of using the binding affinity to the local area (the free energy of binding to the best site and the number of nucleating molecules associated with the area of the best binding site) and the distance order parameters to guide the selection of polymers.     

Orthogonal signal correction applied to the classification of wine and molasses vinegar samples by near-infrared spectroscopy. Feasibility study for the detection and quantification of adulterated vinegar samples

The most common fraudulent practice in the vinegar industry is the addition of alcohol of different origins to the base wine used to produce wine vinegar with the objective of reducing manufacturing costs. The mixture is then sold commercially as genuine wine vinegar, thus constituting a fraud to consumers and an unfair practice with respect to the rest of the vinegar sector. A method based on near-infrared spectroscopy has been developed to discriminate between white wine vinegar and alcohol or molasses vinegar. Orthogonal signal correction (OSC) was applied to a set of 96 vinegar NIR spectra from both original and artificial blends made in the laboratory, to remove information unrelated to a specific response. The specific response used to correct the spectra was the extent of adulteration of the vinegar samples. Both raw and corrected NIR spectra were used to develop separate classification models using the potential functions method as a class-modeling technique. The previous models were compared to evaluate the suitability of near-infrared spectroscopy as a rapid method for discrimination between vinegar origin. The transformation of vinegar NIR spectra by means of an orthogonal signal-correction method resulted in notable improvement of the specificity of the constructed classification models. The same orthogonal correction approach was also used to perform a calibration model able to detect and quantify the amount of exogenous alcohol added to the commercial product. This regression model can be used to quantify the extent of adulteration of new vinegar samples.     

Classical molecular dynamics study of [60]fullerene interactions with silica and polyester surfaces

This study examines the interaction of neutral and charged fullerenes with model silica and polyester surfaces. Molecular dynamics simulations at 298 K indicate that van der Waals forces are sufficiently strong in most cases to cause physisorption of the neutral fullerene particle onto the surfaces. The fullerenes are unable to penetrate the rigid silica surface but are generally able to at least partially infiltrate the flexible polymer surface by opening surface cavities. The introduction of charge to the fullerene generally leads to an increase in both the separation distance and Work of Separation with silica. However, the charged fullerenes generally exhibit significantly closer and stronger interactions with polyester films, with a distinct tendency to absorb into the "bulk" of the polymer. The separation distance and Work of Separation of C60 with each of the surfaces also depend greatly on the sign, magnitude, and localization of the charge on the particle. Cross-linking of the polyester can improve resistance to the neutral fullerene. Functionalization of the polyester surface (F and OH substituents) has been shown to prevent the C60 from approaching as close to the polyester surface. Fluorination leads to improved resistance to positively charged fullerenes, compared to the unmodified polyester. However, hydroxylation generally enables greater adhesion of charged fullerenes to the surface due to H-bonding and electrostatic attraction.     

Identification of ligands that target the HCV-E2 binding site on CD81

Hepatitis C is a global health problem. While many drug companies have active R&D efforts to develop new drugs for treating Hepatitis C virus (HCV), most target the viral enzymes. The HCV glycoprotein E2 has been shown to play an essential role in hepatocyte invasion by binding to CD81 and other cell surface receptors. This paper describes the use of AutoDock to identify ligand binding sites on the large extracellular loop of the open conformation of CD81 and to perform virtual screening runs to identify sets of small molecule ligands predicted to bind to two of these sites. The best sites selected by AutoLigand were located in regions identified by mutational studies to be the site of E2 binding. Thirty-six ligands predicted by AutoDock to bind to these sites were subsequently tested experimentally to determine if they bound to CD81-LEL. Binding assays conducted using surface Plasmon resonance revealed that 26 out of 36 (72 %) of the ligands bound in vitro to the recombinant CD81-LEL protein. Competition experiments performed using dual polarization interferometry showed that one of the ligands predicted to bind to the large cleft between the C and D helices was also effective in blocking E2 binding to CD81-LEL.     

Precision of Flash Pyrolysis-GC-MS Analysis: Experimental Evaluation of the Sources of Variability

The present study was carried out to evaluate the precision and to identify significant sources of variability in flash pyrolysis-GC-MS experiments. The analysis of variance has been applied to the example of polyethylene pyrolysis to estimate the impact of several controlled factors: sample handling, flash pyrolysis filament ageing and calibration. It was demonstrated that to get the best precision in experimental results, it is recommended to set the operator to reduce the impact of sample handling procedure and the filament to avoid variability due to changes in filament characteristics. In comparison, filament ageing and filament calibration are shown to influence in a limited extent the experimental results.     

Modification of Cyclodextrins for Use as Artificial Enzymes

The magical powers of enzymes have been attributed to their ability to bind specific substrates and catalyze reactions of the bound substrate. Artificial enzymes synthetically mimic the binding and the catalytic site to produce molecules that are not only smaller in size but also potentially have similar activity to the real enzymes. The main objective of our research is to create artificial redox enzymes by using cyclodextrins as binding sites and attaching flavin derivatives as the catalytic site. We have developed a strategy to attach a catalytic site to cyclodextrin exclusively at the 2-, 3- or the 6-position. The evaluation of the artificial enzyme in which flavin is attached to the 2-position gives a 647-fold acceleration factor. Although this is modest compared to those of real enzymes (which can have acceleration factors of a trillion), the artificial enzymes allow us to understand the elements that contribute to the incredible catalytic power of enzymes.     

Synthesis and Rearrangement Reactions of C-Alkylidene Carbohydrates

Direct: olefinations on one hand in comparison to eliminations of aldols cf various uloses on the other each proved to be specific as to the sice of unsaturation in the branched-chain products, found to be interconvertible with one exception under a variety of conditions. Although shown to be generally equivalent to its Witcig-counterpart:, the Peterson reagent employed is liable to cause eliminations in the initial olefin. One of the branched-chain products appears to be of unusual molecular rigidity as evidenced by a large 5J coupling.     

INHIBITION OF THE IMMUNE RESPONSE TO ALLOANTIGEN IN THE RAT BY EXPOSURE TO ULTRAVIOLET RADIATION

Exposure of mice to ultraviolet radiation (UV) followed by alloantigen sensitization can suppress the immune response to that alloantigen. In order to assess the applicability of using UV-induced immunosuppression in organ transplantation, the effectiveness of UV in prolonging the survival of vascularized organ allografts must be determined. Because, for technical reasons, rats are better suited than mice for such experiments, we first wanted to determine whether UV suppresses the immune response of inbred rats to alloantigens. The data presented here demonstrate that exposure of rats to UV (115-129 kJ/m2) prior to alloantigenic sensitization decreases the mixed lymphocyte response to alloantigen. The depression of the proliferative response to alloantigen was selective in that spleen cells from the UV-treated rats could respond to mitogenic stimulation. In contrast to previous results with mice, suppressor cells could not be demonstrated in the spleens of the UV-treated rats. In addition, UV treatment after sensitization inhibited the response to alloantigen. These data suggest that treatment of the recipient with UV before or after alloantigenic sensitization may provide a novel method of inhibiting immune responses to allogeneic antigens.     

Cyclodextrin Molecular Reactors

The ability of cyclodextrins to form inclusion complexes with hydrophobic species in aqueous solution makes them well-suited to the development of molecular reactors, to be used as miniature reaction vessels in order to control the outcomes of chemical transformations at the molecular level. In this manner, reaction rates can be increased and products may be obtained that are different to those normally accessible from reactions in free solution. Examples used to illustrate these effects include: the application of cyclodextrins to control the regioselectivity of bromination of aromatic substrates with pyridinium dichlorobromate: the use of a metallocyclodextrin to increase the rate of hydrolysis of a phosphate triester by almost five orders of magnitude; the development of modified cyclodextrins to increase the rates and reverse the regioselectivity of nitrile oxide cycloadditions ; and the use of a cyclodextrin dimer to change the ratio of formation of indigoid dyes by a factor of more than 3500.     

Quantification of particle-bubble interactions using atomic force microscopy: A review

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.     

Characterization of Langmuir-Blodgett film using differential charging in X-ray photoelectron spectroscopy

Differential charging is often regarded as a problem in X-ray photoelectron spectroscopy (XPS) studies, especially for insulating or partially conducting samples. Neutralization techniques have been developed to circumvent this effect. Instead of neutralizing the positive charge, which is often the technique to obtain good quality data, it is possible to exploit this phenomenon to get useful information about the sample. An attempt is made here to use this differential charging to study the mono- and multilayer Langmuir-Blodgett (LB) films of cadmium arachidate on silicon substrate. The surface potential was probed by measuring XPS line shift with respect to their neutral position and was found to have correlation with the thickness of the films. No differential charging was observed in the monolayer LB film where there was only one layer of cadmium headgroup. Significant differential charging was observed for multilayer films, the total charging as well as the differential charging in these films increase with increasing number of layers. Angle-resolved XPS measurements were performed to obtain additional information about the structure of the films. Charging of the upper layer of the films close to the vacuum interface was found to be less compared to that of the interior. The discrete cadmium layers were found to be more differentially charged compared to the continuous hydrocarbon stacks in the multilayer LB films. Charging of the discrete cadmium layers has been utilized to obtain quantitative information of the multilayer LB films.     

Thermal degradation of vinylidene chloride/4-vinylpyridine copolymers

Vinylidene chloride polymers are prominent in the barrier plastics packaging industry. They display good barrier to the transport of oxygen (to prevent spoilage of food items) and flavor and aroma constituents (to prevent 'scalping' on the supermarket shelf). However, these polymers undergo thermal dehydrochlorination during processing. This can lead to a variety of problems including the evolution of hydrogen chloride which must be scavenged to prevent its interaction with the metallic walls of process equipment. Such interaction leads to the formation of metal halides which act as Lewis acids to facilitate the degradation. A potentially effective means to capture hydrogen chloride generated might be to incorporate into the polymer a mild organic base. Accordingly, copolymers of vinylidene chloride and 4-vinylpyridine have been prepared and subjected to thermal aging. Results suggest that the pyridine moiety is sufficiently basic to actively promote dehydrochlorination in the vinylidene chloride segments of the polymer.     

THE MECHANISM OF PHOTOCHEMICAL ADDITION OF CYSTEINE TO URACIL AND FORMATION OF DIHYDROURACIL

Abstract— A proposed mechanism for the photochemical addition of L -cysteine to uracil with the concurrent formation of dihydrouracil is shown to proceed through the triplet excited state of uracil which can abstract hydrogen atoms from cysteine to form dihydrouracil. This triplet state is the same one as that leading to photodimerization. The thiyl radicals generated add to ground state uracil molecules. The data permit a re-evaluation of the quantum yield for intersystem crossing of uracil in water which shows dimerization in aqueous solution to have a maximum efficiency of 56 per cent. The formation of the cross-adduct and dihydrouracil may be sensitized but the efficiency of the reaction is related to the ability of the sensitizer to be photoreduced and not to its triplet energy.     

Adhesion between graphite and modified polyester surfaces: a theoretical study

This study examines the adhesion of graphite to functionalized polyester surfaces using a range of qualitative and quantitative measures of theoretical adhesion. Modifications to the polyester surfaces include the addition of hydroxyl, carboxyl, or fluorine substituents with coverages of 0.4 and 0.9 groups per nm(2). In each case, the introduction of substituents to the surface of the polyester was calculated to lead to reduced adhesion to graphite. Effects of surface relaxation on adhesion are studied by employing different simulation protocols. The theoretical results suggest one mechanism to reduce adhesion to carbonaceous solids is to increase atomic roughness using strongly hydrophilic or alternatively strongly hydrophobic substituents.     

What is and what should never be: artifacts,improbable phytochemicals,contaminants and natural products

Abstract

The scope of this review is to sensitize the natural product chemists to the underestimated problem related to artifact, comprising contaminants and improbable natural compounds. This review wants to give an overview about the various facets of this problem and to provide some hints to avoid incurring these situations. It does not pretend to report exhaustively about all the cases available in literature. The issue of artifacts has always existed and is quite impossible to completely eliminate because the results of phytochemical analysis are known only at the end of the work and in many cases there is not the possibility to compare the results. Therefore, it is important to take the necessary precautions during the workout in order to minimize the possibility that an unexpected event may occur. In second instance, anyone involved in these studies should increase the level of self-criticism with respect to the obtained experimental results.     

Adsorption free energy of variable-charge nanoparticles to a charged surface in relation to the change of the average chemical state of the particles

Variable-charge nanoparticles such as proteins and humics can adsorb strongly to charged macroscopic surfaces such as silica and iron oxide minerals. To model the adsorption of variable-charge particles to charged surfaces, one has to be able to calculate the adsorption free energy involved. It has been shown that the change in the free energy of variable-charge particles is related to the change in their average chemical state upon adsorption, which is commonly described using surface complexation models. In this work, expressions for the free-energy change in variable-charge particles due to changes in chemical binding are derived for three ion-binding models (i.e., the Langmuir, Langmuir-Freundlich, and NICA models) and for changes due to nonspecific binding for the Donnan model. The expressions for the adsorption free energy of the variable-charge particles to a charged surface are derived on the basis of the equality of the (electro)chemical potential of the particles in the bulk solution and adsorption phase. The expressions derived are general in the sense that they account for the competition between charge-determining ions that bind chemically to the particles, and they also apply in case of the formation of chemical bonds between particle ligands and surface sites. The derived expressions can be applied in the future to model the adsorption of variable-charge nanoparticles to charged surfaces. The results obtained for the NICA-Donnan model make it possible to apply this advanced surface complexation model to describe the adsorption of humics to minerals.     

NMR spectroscopic study of the Murex trunculus dyeing process

It is widely accepted that indigo dyes derived from Murex trunculus were used to produce the biblical dyes tekhelet and argaman. We describe a method of following the debromination of natural leucoindigos and their binding to wool using NMR spectroscopy. Debromination is observed prior to reaction with the wool and prior to oxidation. Binding to the wool is shown to occur prior to oxidation. NMR allows the dyeing process to be followed. This, in principle, could be used to correct problems during dyeing that would increase the reliability of the process.