Flow-injection immuno-bioassay for interleukin-6 in humans based on gold nanoparticles modified screen-printed graphite electrodes

A flow-injection electrochemical immunoassay system based on a disposable immunosensor for the determination of interleukin-6 (IL-6) was proposed. The immunosensor was prepared by entrapping horseradish peroxidase (HRP)-labeled IL-6 antibody into gold nanoparticles-modified composite membrane at a screen-printed graphite electrode. With a non-competitive immunoassay format, the immunosensor was inserted in the flow system with an injection of sample, and the injected sample containing IL-6 antigen was produced transparent immunoaffinity reaction with the immobilized HRP-labeled IL-6 antibody. The formed antigen–antibody complex inhibited partly the active center of HRP, and decreased the immobilized HRP to H₂O₂ reduction. The performance and factors influencing the performance of the immunosensor were investigated. Under optimal conditions, the current change obtained from the labeled HRP relative to thionine–H₂O₂ system was proportional to the IL-6 concentration in the range of 5–100 ng L⁻¹ with a detection limit of 1.0 ng L⁻¹ (at 3δ). The flow-injection immunoassay system could automatically control the incubation, washing and measurement steps with acceptable reproducibility and good stability. Moreover, the proposed immunosensors were used to analyze IL-6 in human serum specimens. Analytical results of clinical samples show the developed immunoassay has a promising alternative approach for detecting IL-6 in the clinical diagnosis.     

Amperometric detection of ultra trace amounts of Hg(I) at the surface boron doped diamond electrode modified with iridium oxide

Iridium oxide (IrOx) films formed electrochemically on the surface boron doped diamond electrode by potential cycling in the range −0.2 to 1.2 V from a saturated solution of alkaline iridium(III) solution. A strongly adherent deposit of iridium oxide is formed after 5–10 potential scans. The properties, stability and electrochemical behavior of iridium oxide layers were investigated by atomic force microscopy and cyclic voltammetry. The boron doped diamond (BDD) electrode modified with electrodeposition of a thin film, exhibited an excellent catalytic activity for oxidation of Hg(I) over a wide pH range. The modified electrode shows excellent analytical performance for Hg(I) amperometric detection. The detection limit, sensitivity, response time and dynamic concentration ranges are 3.2 nM, 77 nA μM⁻¹, 100 ms and 5 nM–5 μM. These analytical parameters compare favorably with those obtained with modern analytical techniques and recently published electrochemical methods.     

A bromide selective polymeric membrane electrode based on Zn(II) macrocyclic complex

A novel bromide ion-selective PVC membrane sensor based on 2,3,10,11-tetraphenyl-1,4,9,12-tetraazacyclohexadeca-1,3,9,11-tetraene zinc(II)complex (I) as carrier has been developed. The electrode exhibited wide working concentration range 2.2 × 10⁻⁶ to 1.0 × 10⁻¹ M and a limit of detection as 1.4 × 10⁻⁶ M with a Nernstian slope of 59.2 ± 0.5 mV per decade. The response time of electrode was 20 s over entire concentration range. The electrode possesses the advantages of low resistance, fast response and good selectivities for bromide over a variety of other anions and could be used in a pH range of 3.5–9.5. It was successfully used as an indicator electrode in the potentiometric titration of bromide ions with silver ion and also in the determination of bromide in real samples.     

Lead ion-selective membrane electrodes based on some recently synthesized 9,10-anthraquinone derivatives

Four different 9,10-anthraquinone derivatives were studied to characterize their abilities as lead ion carrier in PVC membrane electrodes. The electrode based on 1,8-dihydroxy-2,7-bis(prop-2′-enyl)-9,10-anthraquinone exhibits a Nernstian response for Pb²⁺ ions over a wide concentration range (2.0×10⁻³–2.0×10⁻⁶ M). The response time of the sensor is 30 s and the membrane can be used for more than four months without observing any deviation. The electrode revealed comparatively good selectivities with respect to alkali, alkaline earth and some transition and heavy metal ions. It was used as an indicator electrode in potentiometric titration of sulfate ions with a lead ion solution.     

一步电沉积法构建辣根过氧化物酶传感器

在恒电位沉积钴铝水滑石(CoAl-LDH)时将辣根过氧化物酶(HRP)和碳纳米管(CNTs)固定于基底电极表面,构建CoAl-LDH-HRP-CNTs修饰电极并用于过氧化氢的检测。 利用SEM对电化学沉积的CoAl-LDH-HRP-CNTs的形貌进行了表征。 采用电化学阻抗对所制备的电极进行了表征。 用循环伏安法对电极的电化学行为进行了研究。 探讨了pH值和测定电位对修饰电极的催化还原性能的影响。 该传感器对过氧化氢的检测在2.5×10^-6~3.35×10^-4 mol/L范围内呈良好的线性关系,灵敏度为0.0049 A·L/mol。     

Amperometric determination of paracetomol by a surface modified cobalt hexacyanoferrate graphite wax composite electrode

A stable electro active thin film of cobalt hexacyanoferrate (CoHCF) was deposited on the surface of an amine adsorbed graphite wax composite electrode using a simple method. Cyclic voltammetric experiments showed two pairs of well defined peaks for this CoHCF modified electrode which exhibited excellent electrocatalytic property for the oxidation of paracetomol at a reduced overpotential of 100 mV and over a concentration range of 3.33 × 10⁻⁶ to 1.0 × 10⁻³ M with a slope of 0.208 μA/μM with good sensitivity. The influence of the supporting electrolyte on peak current and peak potential were also obtained in addition with effects of common interference (e.g., ascorbic acid) on the response of the modified electrode. Various parameters that influence the electrochemical behavior of the modified electrode were optimized by varying scan rates and pH. Electrochemical impedance spectroscopy studies suggested that the electrode reaction of the CoHCF film is mainly controlled by transport of counter ion. The immobilized CoHCF maintained its redox activity showing a surface controlled electrode reaction with the electron transfer rate constant (K_s) of 0.94 s⁻¹ and charge transfer coefficient of 0.42. Hydrodynamic and chronoamperometric studies were done to explore the utility of the modified electrode in dynamic systems. The results of the differential pulse voltammetry (DPV) using the modified electrode was applied for the determination of paracetomol in commercially available tablets. The results obtained reveal that the electrode under study could be used as an effective sensor for online monitoring of paracetomol.     

Bismuth film electrode for anodic stripping voltammetric determination of tin

The bismuth film electrode (BiFE), in combination with anodic stripping voltammetry, offers convenient measurement of low concentrations of tin. The procedure involves simultaneous in situ formation of the bismuth film electrode on a glassy carbon substrate electrode, together with electrochemical deposition of tin, in a non-deaerated model solution containing bismuth ions, catechol as complexing agent and the metal analyte, followed by an anodic stripping scan. The BiFE is characterized by an attractive electroanalytical performance, with two distinct voltammetric stripping signals corresponding to tin, accompanied with low background contributions. Several experimental parameters were optimized, such as concentration of bismuth ions and catechol, deposition potential, deposition time and pH of the model solution. In addition, a critical comparison is given with bare glassy carbon and mercury film electrodes, revealing the superior characteristics of BiFE for measurement of tin. BiFE exhibited highly linear behavior in the examined concentration range from 1 to 100 μg L⁻¹ of tin (R² = 0.997), an LoD of 0.26 μg L⁻¹ tin, and good reproducibility with a calculated R.S.D. of 7.3% for 10 μg L⁻¹ tin (n = 10). As an example, the practical applicability of BiFE was tested with the measurement of tin in a real sample of seawater.     

一种新的氰亚金酸根离子选择电极装置的研究

以十六烷基三辛基氰亚金酸铵作离子交换剂制备了PVC敏感膜,并用铂丝插入0.01MKAu(CN)₂-0.01MK₃Fe(CN)₆-0.01MK₄Fe(CN)₆溶液中作内参比体系,制成Au(CN)₂^-离子选择电极,测试了电极的各种主要性能,还测试了对十七种阴离子的电位选择性系数,并对其规律进行了讨论。     

Design and fabrication of a low-cost flow-through cell for the determination of acetaminophen in pharmaceutical formulations by flow injection cyclic voltammetry

A low-cost electrochemical flow-through cell is designed and fabricated to use in conjunction with a flow injection (FI) system. This detector cell used a centrosymmetric radial flow thin-layer geometry with a stainless steel auxiliary electrode and a reference electrode (Ag/AgCl) without a salt bridge. The 5H pencil lead electrode used as a working electrode in the home-made cell is an extremely inexpensive electrode which performs as well as the expensive commercial glassy carbon electrode. Optimum conditions for determining acetaminophen using the proposed FI manifold was investigated. Appropriate volume of sample and/or standard solution containing acetaminophen in pH 2.2 Mcllvaine buffer solution was injected into the proposed FI system and mixed with the flowing stream of supporting electrolyte (pH 2.2 Mcllvaine buffer solution) at an optimum flow rate of 1 ml min⁻¹. The cyclic voltammograms were recorded over the potential range from −0.5 to +2.0 V with a scan rate of 40 mV s⁻¹. Linear calibration curve over the range of 0.1–5 mM acetaminophen was established with the regression equation Y=3.68X+1.0157 (r²=0.9964). The recommended method has been applied to the determination of acetaminophen in 8 commercial pharmaceutical preparations. The percentage recoveries of the spiked acetaminophen in four tablet samples were ranging from 103 to 112 with the relative standard deviation in the range of 0.1–1.3%.     

砷钼杂多酸薄膜化学修饰电极研究

杂多酸和杂多酸化学修饰电极的电化学研究及应用正在不断地深入发展,杂多酸化学修饰电极不仅可用于中心原子的定量分析,还以其优良的电催化性质,应用于液相色谱的电化学检测,因此日益受到重视,本文首次报道以玻碳为基体的砷钼杂多酸薄膜化学修饰电极(简称AsMo₁₂电极)的制备及其电化学和电催化性质,AsMo₁₂电极具有良好的稳定性和电化学活性,电极寿命长,可应用于砷(V)的伏安法测定和IO^3-的电催化检测。     

Zn(II)-selective membrane electrode based on tetra(2-aminophenyl) porphyrin

A new PVC membrane electrode for Zn²⁺ ions based on tetra(2-aminophenyl) porphyrin (TAPP) as membrane carrier is prepared. The sensor exhibits a linear stable response over a wide concentration range (5.0×10⁻⁵ to 1.0×10⁻¹ M) with a slope of 26.5 mV/decade and a limit of detection 3.0×10⁻⁵ M (1.96 ppm). It has a response time of about l0 s and can be used for at least 8 months without any divergence in potential. The propose membrane sensor revealed good selectivities for Zn²⁺ over a wide variety of other metal ions and can be used in pH range of 3.0–6.0. It was successfully applied to the direct determination of zinc in a pharmaceutical sample and also as an indicator electrode in potentiometric titration of Zn²⁺ ions.     

Use of CdSe/ZnS core-shell quantum dots as energy transfer donors in sensing glucose

In the present work, CdSe/ZnS core-shell quantum dots were synthesized and conjugated with enzymes, glucose oxidase (GOD) and horseradish peroxidase (HRP). The complex of enzyme-conjugated QDs was used as QD-FRET-based probes to sense glucose. The QDs were used as an electron donor, whereas GOD and HRP were used as acceptors for the oxidation/reduction reactions involved in oxidizing glucose to gluconic acid. Electron transfer between the redox enzymes and the electrochemical reduction of H₂O₂ (or O₂) occurred rapidly, resulting in an increase of the turnover rate of the electron exchange between the substrates (e.g. glucose, H₂O₂ and O₂) and the enzymes (GOD, HRP), as well as between the QDs and the enzymes. The transfer of non-radiative energy from the QDs to the enzymes resulted in the fluorescence quenching of the QDs, corresponding to the increase in the concentration of glucose. The linear detection ranges of glucose concentrations were 0–5.0 g/l (R = 0.992) for the volume ratios of 10/5/5, 0.2–5.0 g/l (R = 0.985) for the volume ratios of 10/5/3 and 1.0–5.0 g/l (R = 0.982) for the volume ratios of 10/5/0. Temperature (29–37 °C), pH (6–10) and some ions (NH₄⁺, NO₃⁻, Na⁺, Cl⁻) had no interference effect on the glucose measurement.     

Copper-modified gold electrode specific for monosaccharide detection Use in amperometric determination of phenylmercury based on invertase enzyme inhibition

The electrochemical oxidation of mono- and disaccharides at various copper-modified electrodes is reported: glassy carbon modified at open circuit or by electrochemical deposition of copper, gold modified by electrochemical deposition, and at bulk copper electrodes. A comparative study of these four electrodes was made by linear sweep voltammetry and amperometry. The maximum oxidation peak separation between disaccharides and monosaccharides is about 200 mV. After optimization, amperometric determination of monosaccharides was done at +0.30 versus Ag/AgCl in 0.15 M NaOH at the copper-modified gold electrode.

Using the developed method, the enzymatic activities of invertase and β-galactosidase were determined through their reaction with sucrose and lactose, respectively. Validation was carried out by a spectrophotometric method based on 3,5-dinitrosalicylic acid, and it was shown that the proposed electrochemical method is more sensitive.

The analytical utility of the copper-modified gold electrode was tested for the determination of organic mercury. Addition of phenylmercury standards to the invertase solution caused a decrease in the enzyme activity, and allowed the determination of phenylmercury in pharmaceutical samples. The concentration has been determined in the 10–55 ng ml⁻¹ range.     

Biosensor for phenol based on the direct electron transfer blocking of peroxidase immobilising on silica–titanium

Horseradish peroxidase (HRP) was immobilised on silica gel modified with titanium oxide. This material was employed to prepare modified carbon paste electrode. The direct electron transfer of the hydrogen peroxide reduction by HRP was blocked when immobilised on silica–titanium. This biosensor presented a very sensitive response for phenol (1 μmol l⁻¹) at an applied potential of 0 mV vs SCE. The best condition was achieved in phosphate buffer pH 6.8, ratio of hydrogen peroxide/phenol higher than 0.35. The biosensor showed a linear response range between 10 and 50 μmol l⁻¹ of phenol, adjusted by the equation j=−32.8+16.3 [phenol], for n=5 with a correlation coefficient of 0.9995. The response time of the biosensor was about 3 s.     

Enhancement effect of sodium dodecyl benzene sulfonate (SDBS) and its application into voltammetric determination of telmisartan

A sensitive and rapid electrochemical method was developed for the determination of telmisartan based on the enhancement effect of sodium dodecyl benzene sulfonate (SDBS). In 0.1 mol L⁻¹ HClO₄ and in the presence of 7.5 × 10⁻⁵ mol L⁻¹ SDBS, a well-defined and sensitive oxidation peak was observed for telmisartan at the acetylene black (AB) paste electrode. However, the oxidation peak is poor-shaped and the peak current is very low in the absence of SDBS, suggesting that SDBS shows obvious enhancement effect for the determination of telmisartan. After all the experimental parameters were optimized, a sensitive and simple electrochemical method was developed for determining telmisartan. The oxidation peak current is proportional to the concentration of telmisartan over the range from 2.5 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹. The detection limit is 7.5 × 10⁻⁸ mol L⁻¹ after 2 min of accumulation. This new voltammetric method was successfully used to detect telmisartan in drugs.     

Fabrication of novel threefold shape CeO2 dendrites: Optical and electrochemical properties

Threefold shape CeO₂ dendritic crystals were successfully prepared from a single precursor via a thermal decomposition route. The precursor was synthesized by a hydrothermal reaction using Ce(NO₃)₃6 H₂O with CO(NH₂)₂ at 150 °C in a water–TEA complex solution. The dendritic pattern of precursor almost remained in the as-prepared product. The optical absorption spectrum indicates that the CeO₂ dendrites have a direct band gap of 3.51 eV. The electrochemical tests show that the CeO₂ dendrites are a promising electrode material as they can deliver a large reversible discharge capacity of about 534 mAh g⁻¹.     

Ion-selective electrode for the determination of prenalterol

A new prenalterol (Pr) ion-selective PVC membrane electrode based on the ion-pair complex of Pr with sodium tetraphenylborate was prepared and its performance characteristics were studied. The electrode exhibited a linear response with a good Nernstian slope over a relatively wide range of concentration. The electrode whose membrane was made of 8.0% (w/w) of ion pair, 49.5% (w/w) of dioctyl phthalate (DOP) and 43.5% (w/w) of PVC showed characteristics higher than those obtained with the other ones, namely, slope of 56.3 mV per concentration decade, at 25 °C; usable concentration range 1.2×10⁻⁵–3.2×10⁻² M prenalterol; response time ≤20 s. Up to 24 h continuous soaking, the calibration graph slope was constant at 56.0 mV per concentration decade, at 25 °C, then it decreased gradually as the time of soaking increases reaching 41 mV per decade after 11 days. The changes in pH did not affect the electrode performance within the range 2.2–7.5. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode. The electrode showed very good selectivity for Pr with respect to a large number of inorganic and organic cations. The standard addition method and potentiometric titration were used to determine Pr in pure solutions and in pharmaceutical formulations. The relative standard deviations (R.S.D.) of the three methods used for the determination of prenalterol in pharmaceutical formulations were 0.8, 2.1 and 1.9% of the extrapolation, standard addition and potentiometric methods, respectively.     

基于聚乙烯醇离子液体负载HRP修饰石墨烯/纳米金复合膜的过氧化氢生物传感器

以石墨烯/纳米金修饰玻碳电极为基底, 用聚乙烯醇与离子液体复合物将辣根过氧化物酶固定于电极表面, 制备了过氧化氢生物传感器. 结果表明, 在0.1 mol/L HAc-NaAc+0.1mol/L KCl(pH=6.5)中, H₂O₂的氧化峰电流与其浓度在9.55×10^-6~6.01×10^-3 mol/L间呈良好线性关系, 检出限(3S/N)为3.3×10^-7 mol/L. 用标准加入法做回收实验, 回收率在93.4%~100.5%之间. 该传感器对H₂O₂具有较高的灵敏度和较低的检测限, 稳定性和重现性良好, 使用寿命较长, 且制作成本低, 可多次重复使用.     

Determination of breath alcohol using a differential-type amperometric biosensor based on alcohol dehydrogenase

A differential-type amperometric biosensor based on conventional thick-film technology has been developed for breath alcohol measurement. The amperometric breath alcohol biosensor utilizes the alcohol dehydrogenase (ADH) and nicotinamide adenine dinucleotide (NAD⁺) cofactor which produce reduced NADH as a product of the oxidation of alcohol. The biosensor was designed in a differential format consisting of a common Ag/AgCl reference electrode, an active working electrode containing the ADH, and the inactive working electrode containing only bovine serum albumin instead of the ADH. The differential signal between the active working electrode and the inactive working electrode minimized the interference from a large number of oxidizable species present in a person's breath. Prior to the amperometric measurement the biosensor was hydrated simply by dipping it into a phosphate buffer solution at pH 7.4. The NADH produced from the enzymatic reaction was oxidized at the working electrode biased at a potential of 470 mV vs. an on-board Ag/AgCl reference electrode. The biosensor can measure a person's breath alcohol over the concentration range 20–800 ppm routinely required in a test of drunken driving.     

Sensitive determination of phenylephrine and chlorprothixene at poly(4-aminobenzene sulfonic acid) modified glassy carbon electrode

Phenylephrine (i.e. PHE) and chlorprothixene (i.e. CPT), two effective and important antipsychotic drugs with low redox activity, were found generating an irreversible anodic peak at about +0.89 V (vs. SCE) and +1.04 V in 0.05 M HAc–NaAc (pH 5.0) or NH₂CH₂COOH–HCl (pH 2.4) buffer solution at poly(4-aminobenzene sulfonic acid) modified glassy carbon electrode (i.e. poly(4-ABSA)/GC), respectively. Sensitive and quantitative measurement for them based on the anodic peaks was established under the optimum conditions. The anodic peak current was linear to PHE and CPT concentrations from 1 × 10⁻⁷ to 1.5 × 10⁻⁵ M and 2 × 10⁻⁶ to 4.5 × 10⁻⁵ M, the detection limits obtained were 1 × 10⁻⁸ and 1 × 10⁻⁷ M, separately. The modified electrode exhibited some excellent characteristics including easy regeneration, high stability, good reproducibility and selectivity. The method proposed was successfully applied to the determination of PHE and CPT in drug injections or tablets and proved to be reliable compared with ultraviolet spectrophotometry. The modified electrode was characterized by electrochemical methods.