Ion mobility spectrometry – Mass spectrometry coupling for synthetic polymers

This review covers applications of ion mobility spectrometry (IMS) hyphenated to mass spectrometry (MS) in the field of synthetic polymers. MS has become an essential technique in polymer science, but increasingly complex samples produced to provide desirable macroscopic properties of high‐performance materials often require separation of species prior to their mass analysis. Similar to liquid chromatography, the IMS dimension introduces shape selectivity but enables separation at a much faster rate (milliseconds vs minutes). As a post‐ionization technique, IMS can be hyphenated to MS to perform a double separation dimension of gas‐phase ions, first as a function on their mobility (determined by their charge state and collision cross section, CCS), then as a function of their m/z ratio. Implemented with a variety of ionization techniques, such coupling permits the spectral complexity to be reduced, to enhance the dynamic range of detection, or to achieve separation of isobaric ions prior to their activation in MS/MS experiments. Coupling IMS to MS also provides valuable information regarding the 3D structure of polymer ions in the gas phase and regarding how to address the question of how charges are distributed within the structure. Moreover, the ability of IMS to separate multiply charged species generated by electrospray ionization yields typical IMS‐MS 2D maps that permit the conformational dynamics of synthetic polymer chains to be described as a function of their length.     

Multidimensional Mass Spectrometry of Synthetic Polymers and Advanced Materials

Multidimensional mass spectrometry interfaces a suitable ionization technique and mass analysis (MS) with fragmentation by tandem mass spectrometry (MS²) and an orthogonal online separation method. Separation choices include liquid chromatography (LC) and ion‐mobility spectrometry (IMS), in which separation takes place pre‐ionization in the solution state or post‐ionization in the gas phase, respectively. The MS step provides elemental composition information, while MS² exploits differences in the bond stabilities of a polymer, yielding connectivity and sequence information. LC conditions can be tuned to separate by polarity, end‐group functionality, or hydrodynamic volume, whereas IMS adds selectivity by macromolecular shape and architecture. This Minireview discusses how selected combinations of the MS, MS², LC, and IMS dimensions can be applied, together with the appropriate ionization method, to determine the constituents, structures, end groups, sequences, and architectures of a wide variety of homo‐ and copolymeric materials, including multicomponent blends, supramolecular assemblies, novel hybrid materials, and large cross‐linked or nonionizable polymers.     

Characterization of the dehydration products due to thermal decomposition of peptides by liquid chromatography‐tandem mass spectrometry

Thermal decomposition (TD) of proteins is being investigated as a rapid digestion step for bottom‐up proteomics. Mass spectrometry (MS) analyses of the TD products of simple peptides and intact proteins have revealed several nonvolatile products at masses lower than the precursor biomolecule (M). In addition to products stemming from site‐specific cleavages, many signals are also observed at a corresponding M‐18, most likely because of dehydration (M‐H₂O) during the heating process. Understanding the structural nature of the water loss product is important in establishing the utility of their tandem mass spectra (collision‐induced dissociation) in determining the precursor ion amino acid sequence in a bottom‐up proteomic workflow. Dehydration of a peptide can take place from a variety of sources including side chain groups, C‐terminus, and/or intramolecular cyclization (C to N‐terminus cyclization). In this work, liquid chromatography‐tandem MS (LC‐MS/MS) and a series of standard peptides (angiotensin II, DRVYIHPF and its cyclic analog) are implemented to decipher the structure of the TD dehydration product. In addition, a derivatization strategy incorporating N‐terminus acetylation was developed that allowed the direct comparison of tandem mass spectra of standard cyclic peptides with those resulting from the TD process, thus eliminating any ambiguity from the direct comparison of their mass spectra (due to gas‐phase cyclization of b‐ions, which can result in sequence scrambling of the precursor ion). Results from these investigations indicated that peptide dehydrated TD products were mostly linear in nature, and water loss was favored from the C‐terminus carboxyl group or, when present, the aspartic acid side chain. Given the predictable nature of the formation of TD dehydration products, their MS/MS analysis can be of utility in providing complementary and confirmatory sequence information of the precursor peptide. Copyright © 2015 John Wiley & Sons, Ltd.     

Ion Mobility Spectrometry Reveals Duplex DNA Dissociation Intermediates

Electrospray ionization (ESI) soft desolvation is widely used to investigate fragile species such as nucleic acids. Tandem mass spectrometry (MS/MS) gives access to the gas phase energetics of the intermolecular interactions in the absence of solvent, by following the dissociation of mass-selected ions. Ion mobility mass spectrometry (IMS) provides indications on the tridimensional oligonucleotide structure by attributing a collision cross section (CCS) to the studied ion. Electrosprayed duplexes longer than eight bases pairs retain their helical structure in a solvent-free environment. However, the question of conformational changes under activation in MS/MS studies remains open. The objective of this study is to probe binding energetics and characterize the unfolding steps occurring prior to oligonucleotide duplex dissociation. Comparing the evolution of CCS with collision energy and breakdown curves, we characterize dissociation pathways involved in CID-activated DNA duplex separation into single strands, and we demonstrate here the existence of stable dissociation intermediates. At fixed duplex length, dissociation pathways were found to depend on the percentage of GC base pairs and on their position in the duplex. Our results show that pure GC sequences undergo a gradual compaction until reaching the dissociation intermediate: A-helix. Mixed AT-GC sequences were found to present at least two conformers: a classic B-helix and an extended structure where the GC tract is a B-helix and the AT tract(s) fray. The dissociation in single strands takes place from both conformers when the AT base pairs are enclosed between two GC tracts or only from the extended conformer when the AT tract is situated at the end(s) of the sequence.

Peptide‐Assisted Design of Precision Polymer Sequences: On the Relevance of the Side‐Chain Sequences and the Variability of the Backbone

Functional sequences of monodisperse, sequence‐defined oligo(amide‐urethane)s are designed based on a peptide sequence as blueprint. The translation of a discrete side‐chain functionality sequence from a known peptide‐based solubilizer of the photosensitizer meta‐tetra(hydroxyphenyl)‐chlorin, into a non‐peptidic precision polymer backbone is demonstrated. The resulting peptidomimetic precision polymers retain the functions of the parent peptide sequence, showing analogues sensitivity toward single monomer mutations/exchanges and even exceeding the parent peptide equivalent by reaching up to 69% higher payload capacities and more favored release kinetics.     

De novo sequence analysis and intact mass measurements for characterization of phycocyanin subunit isoforms from the blue‐green alga Aphanizomenon flos‐aquae

In this work, partial characterization of the primary structure of phycocyanin from the cyanobacterium Aphanizomenon flos‐aquae (AFA) was achieved by mass spectrometry de novo sequencing with the aid of chemical derivatization. Combining N‐terminal sulfonation of tryptic peptides by 4‐sulfophenyl isothiocyanate (SPITC) and MALDI‐TOF/TOF analyses, facilitated the acquisition of sequence information for AFA phycocyanin subunits. In fact, SPITC‐derivatized peptides underwent facile fragmentation, predominantly resulting in y‐series ions in the MS/MS spectra and often exhibiting uninterrupted sequences of 20 or more amino acid residues. This strategy allowed us to carry out peptide fragment fingerprinting and de novo sequencing of several peptides belonging to both α‐ and β‐phycocyanin polypeptides, obtaining a sequence coverage of 67% and 75%, respectively. The presence of different isoforms of phycocyanin subunits was also revealed; subsequently Intact Mass Measurements (IMMs) by both MALDI‐ and ESI‐MS supported the detection of these protein isoforms. Finally, we discuss the evolutionary importance of phycocyanin isoforms in cyanobacteria, suggesting the possible use of the phycocyanin operon for a correct taxonomic identity of this species. Copyright © 2008 John Wiley & Sons, Ltd.     

High‐throughput workflow for identification of phosphorylated peptides by LC‐MALDI‐TOF/TOF‐MS coupled to in situ enrichment on MALDI plates functionalized by ion landing

We report an MS‐based workflow for identification of phosphorylated peptides from trypsinized protein mixtures and cell lysates that is suitable for high‐throughput sample analysis. The workflow is based on an in situ enrichment on matrix‐assisted laser desorption/ionization (MALDI) plates that were functionalized by TiO₂ using automated ion landing apparatus that can operate unsupervised. The MALDI plate can be functionalized by TiO₂ into any array of predefined geometry (here, 96 positions for samples and 24 for mass calibration standards) made compatible with a standard MALDI spotter and coupled with high‐performance liquid chromatography. The in situ MALDI plate enrichment was compared with a standard precolumn‐based separation and achieved comparable or better results than the standard method. The performance of this new workflow was demonstrated on a model mixture of proteins as well as on Jurkat cells lysates. The method showed improved signal‐to‐noise ratio in a single MS spectrum, which resulted in better identification by MS/MS and a subsequent database search. Using the workflow, we also found specific phosphorylations in Jurkat cells that were nonspecifically activated by phorbol 12‐myristate 13‐acetate. These phosphorylations concerned the mitogen‐activated protein kinase/extracellular signal‐regulated kinase signaling pathway and its targets and were in agreement with the current knowledge of this signaling cascade. Control sample of non‐activated cells was devoid of these phosphorylations. Overall, the presented analytical workflow is able to detect dynamic phosphorylation events in minimally processed mammalian cells while using only a short high‐performance liquid chromatography gradient. Copyright © 2015 John Wiley & Sons, Ltd.     

Pharmaceutical metabolite profiling using quadrupole/ion mobility spectrometry/time‐of‐flight mass spectrometry

The use of hybrid quadrupole ion mobility spectrometry time‐of‐flight mass spectrometry (Q/IMS/TOFMS) in the metabolite profiling of leflunomide (LEF) and acetaminophen (APAP) is presented. The IMS drift times (T_d) of the drugs and their metabolites were determined in the IMS/TOFMS experiments and correlated with their exact monoisotopic masses and other in silico generated structural properties, such as connolly molecular area (CMA), connolly solvent‐excluded volume (CSEV), principal moments of inertia along the X, Y and Z Cartesian coordinates (MI‐X, MI‐Y and MI‐Z), inverse mobility and collision cross‐section (CCS). The correlation of T_d with these parameters is presented and discussed. IMS/TOF tandem mass spectrometry experiments (MS² and MS³) were successfully performed on the N‐acetyl‐p‐benzoquinoneimine glutathione (NAPQI‐GSH) adduct derived from the in vitro microsomal metabolism of APAP. As comparison, similar experiments were also performed using hybrid triple quadrupole linear ion trap mass spectrometry (QTRAPMS) and quadrupole time‐of‐flight mass spectrometry (QTOFMS). The abilities to resolve the product ions of the metabolite within the drift tube and fragment the ion mobility resolved product ions in the transfer travelling wave‐enabled stacked ring ion guide (TWIG) demonstrated the potential applicability of the Q/IMS/TOFMS technique in pharmaceutical metabolite profiling. Copyright © 2009 John Wiley & Sons, Ltd.     

Using Gaussian model to improve biological sequence comparison

One of the major tasks in biological sequence analysis is to compare biological sequences, which could serve as evidence of structural and functional conservation, as well as of evolutionary relations among the sequences. Numerous efficient methods have been developed for sequence comparison, but challenges remain. In this article, we proposed a novel method to compare biological sequences based on Gaussian model. Instead of comparing the frequencies of k‐words in biological sequences directly, we considered the k‐word frequency distribution under Gaussian model which gives the different expression levels of k‐words. The proposed method was tested by similarity search, evaluation on functionally related genes, and phylogenetic analysis. The performance of our method was further compared with alignment‐based and alignment‐free methods. The results demonstrate that Gaussian model provides more information about k‐word frequencies and improves the efficiency of sequence comparison. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Extracellular matrix alterations in low‐grade lung adenocarcinoma compared with normal lung tissue by imaging mass spectrometry

Lung adenocarcinoma (LUAD) is the second most common cancer, affecting both men and women. Fibrosis is a hallmark of LUAD occurring throughout progression with excess production of extracellular matrix (ECM) components that lead to metastatic cell processes. Understanding the ECM cues that drive LUAD progression has been limited due to a lack of tools that can access and report on ECM components within the complex tumor microenvironment. Here, we test whether low‐grade LUAD can be distinguished from normal lung tissue using a novel ECM imaging mass spectrometry (ECM IMS) approach. ECM IMS analysis of a tissue microarray with 20 low‐grade LUAD tissues and 20 normal lung samples from 10 patients revealed 25 peptides that could discriminate between normal and low‐grade LUAD using area under the receiver‐operating curve (AUC) ≥0.7, P value ≤.001. Principal component analysis demonstrated that 62.4% of the variance could be explained by sample origin from normal or low‐grade tumor tissue. Additional work performed on a wedge resection with moderately differentiated LUAD demonstrated that the ECM IMS analytical approach could distinguish LUAD spectral features from spectral features of normal adjacent lung tissue. Conventional liquid chromatography with tandem mass spectrometry (LC‐MS/MS) proteomics demonstrated that specific sites of hydroxylation of proline (HYP) were a main collagen post translational modification that was readily detected in LUAD. A distinct peptide from collagen 3A1 modified by HYP was increased 3.5 fold in low‐grade LUAD compared with normal lung tissue (AUC 0.914, P value <.001). This suggests that regulation of collagen proline hydroxylation could be an important process during early LUAD fibrotic deposition. ECM IMS is a useful tool that may be used to define fibrotic deposition in low‐grade LUAD.     

A method combining SPITC and 18O labeling for simultaneous protein identification and relative quantification

The relative quantification and identification of proteins by matrix‐assisted laser desorption ionization time‐of‐flight MS is very important in /MS is very important in protein research and is usually conducted separately. Chemical N‐terminal derivatization with 4‐sulphophenyl isothiocyanate facilitates de novo sequencing analysis and accurate protein identification, while ¹⁸O labeling is simple, specific and widely applicable among the isotopic labeling methods used for relative quantification. In the present study, a method combining 4‐sulphophenyl isothiocyanate derivatization with ¹⁸O isotopic labeling was established to identify and quantify proteins simultaneously in one experiment. Reaction conditions were first optimized using a standard peptide (fibrin peptide) and tryptic peptides from the model protein (bovine serum albumin). Under the optimized conditions, these two independent labeling steps show good compatibility, and the linear relativity of quantification within the ten times dynamic range was stable as revealed by correlation coefficient analysis (R² value = 0.998); moreover, precursor peaks in MS/MS spectrum could provide accurate quantitative information, which is usually acquired from MS spectrum, enabling protein identification and quantification in a single MS/MS spectrum. Next, this method was applied to native peptides isolated from spider venoms. As expected, the de novo sequencing results of each peptide matched with the known sequence precisely, and the measured quantitative ratio of each peptide corresponded well with the theoretical ratio. Finally, complex protein mixtures of spider venoms from male and female species with unknown genome information were analyzed. Differentially expressed proteins were successfully identified, and their quantitative information was also accessed. Taken together, this protein identification and quantification method is simple, reliable and efficient, which has a good potential in the exploration of peptides/proteins from species with unknown genome. Copyright © 2014 John Wiley & Sons, Ltd.     

A Multicomponent Conjugation Strategy to Unique N‐Steroidal Peptides: First Evidence of the Steroidal Nucleus as a β‐Turn Inducer in Acyclic Peptides

Constraining small peptides into specific secondary structures has been a major challenge in peptide ligand design. So far, the major solution for decreasing the conformational flexibility in small peptides has been cyclization. An alternative is the use of topological templates, which are able to induce and/or stabilize peptide secondary structures by means of covalent attachment to the peptide. Herein a multicomponent strategy and structural analysis of a new type of peptidosteroid architecture having the steroid as N‐substituent of an internal amide bond is reported. The approach comprises the one‐pot conjugation of two peptide chains (or amino acid derivatives) to aminosteroids by means of the Ugi reaction to give a unique family of N‐steroidal peptides. The conjugation efficiency of a variety of peptide sequences and steroidal amines, as well as their consecutive head‐to‐tail cyclization to produce chimeric cyclopeptide–steroid conjugates, that is, macrocyclic lipopeptides, was assessed. Determination of the three‐dimensional structure of an acyclic N‐steroidal peptide in solution proved that the bulky, rigid steroidal template is capable of both increasing significantly the conformational rigidity, even in a peptide sequence as short as five amino acid residues, and inducing a β‐turn secondary structure even in the all‐s‐trans isomer. This report provides the first evidence of the steroid skeleton as β‐turn inducer in linear peptide sequences.     

De novo peptide sequencing by tandem MS using complementary CID and electron transfer dissociation

De novo sequencing of peptides using tandem MS is difficult due to missing fragment ions in the spectra commonly obtained after CID of peptide precursor ions. Complementing CID spectra with spectra obtained in an ion‐trap mass spectrometer upon electron transfer dissociation (ETD) significantly increases the sequence coverage with diagnostic ions. In the de novo sequencing algorithm CompNovo presented here, a divide‐and‐conquer approach was combined with an efficient mass decomposition algorithm to exploit the complementary information contained in CID and ETD spectra. After optimizing the parameters for the algorithm on a well‐defined training data set obtained for peptides from nine known proteins, the CompNovo algorithm was applied to the de novo sequencing of peptides derived from a whole protein extract of Sorangium cellulosum bacteria. To 2406 pairs of CID and ETD spectra contained in this data set, 675 fully correct sequences were assigned, which represent a success rate of 28.1%. It is shown that the CompNovo algorithm yields significantly improved sequencing accuracy as compared with published approaches using only CID spectra or combined CID and ETD spectra.     

多级质谱法测定Axinastatin 1环肽序列及其断裂机理研究

对具有抗癌活性的海洋环肽Axinastatin 1进行化学合成. 采用多级质谱法对合成环肽进行序列测定. 线性前体测序依据b_x－y_z断裂路径, 在同一张MS²谱中利用b和y离子所提供序列信息的互补来实现. 环肽测序依据b_x→b_x－1断裂路径, 每一级MS由b离子的C端碰撞掉一个氨基酸残基直到MS⁶, 得到2套b离子, 根据它们所提供序列信息的互补可准确测定环肽序列并推断其环结构, 同时观察到b离子重排现象. 讨论了上述断裂与重排的路径和机理, 并利用半经验量子化学PM3和AM1两种算法计算了碎片的生成焓, 验证了路径的合理性. 由离子b_5PN的生成焓偏高和其重排间的联系尝试提出过渡结构假设.     

MALDI mass spectrometry‐based sequence analysis of arginine‐containing glycopeptides: improved fragmentation of glycan and peptide chains by modifying arginine residue

This paper describes an improved method for the sequence analysis of Arg‐containing glycopeptide by MALDI mass spectrometry (MS). The method uses amino group derivatization (4‐aza‐6‐(2,6‐dimethyl‐1‐piperidinyl)‐5‐oxohexanoic acid N‐succinimidyl ester) and removal (carboxypeptidase B) or modification (peptidylarginine deiminase 4) of the arginine residue of the peptide. The derivatization attaches a basic tertiary amine moiety onto the peptides, and the enzymatic treatment removes or modifies the arginine residue. Fragmentation of the resulting glycopeptide under low‐energy collision‐induced dissociation yielded a simplified ion series of both the glycan and the peptide that can facilitate their sequencing. The feasibility of the method was studied using α₁‐acid glycoprotein‐derived N‐linked glycopeptides, and glycan and peptide in each glycopeptide were successfully sequenced by MALDI tandem MS (MS/MS). Copyright © 2013 John Wiley & Sons, Ltd.     

Mapping the fly Malpighian tubule lipidome by imaging mass spectrometry

Matrix‐assisted laser/desorption ionization imaging mass spectrometry (MALDI IMS) is an analytical technique for understanding the spatial distribution of biomolecules across a sample surface. Originally employed for mammalian tissues, this technology has been adapted to study specimens as diverse as microbes and cell cultures, food such as strawberries, and invertebrates including the vinegar fly Drosophila melanogaster. As an ideal model organism, Drosophila has brought greater understanding about conserved biological processes, organism development, and diseased states and even informed management practices of agriculturally and environmentally important species. Drosophila displays anatomically separated renal (Malpighian) tubules that are the physiological equivalent to the vertebrate nephron. Insect Malpighian tubules are also responsible for pesticide detoxification. In this article, we first describe an effective workflow and sample preparation method to study the phospholipid distribution of the Malpighian tubules that initially involves the manual microdissection of the tubules in saline buffer followed by a series of washes to remove excess salt and enhances the phospholipid signals prior to matrix deposition and IMS at 25‐μm spatial resolution. We also established a complementary methodology for lipid IMS analysis of whole‐body fly sections using a dual‐polarity data acquisition approach at the same spatial resolution after matrix deposition by sublimation. Both procedures yield rich signal profiles from the major phospholipid classes. The reproducibility and high‐quality results offered by these methodologies enable cohort studies of Drosophila through MALDI IMS.     

Development of quantitative imaging mass spectrometry (q-IMS) for drug visualization using animal tissues

Quantitative imaging mass spectrometry (q-IMS) is a frontier topic of research in drug analysis. Although many q-IMS methodologies have been reported, validation of the method is insufficient. We have investigated the feasibility of coupling q-IMS with liquid chromatography-tandem mass spectrometry (LC-MS/MS) to develop a verifiable method. The approach combines quantitative LC-MS/MS information with the spatial distribution information obtained by IMS. This paper compares measured drug quantities with those estimated using IMS. The target drug, erlotinib, is a tyrosine kinase inhibitor of non-small-cell lung cancer. The quantitative accuracy of our q-IMS method in an animal model study is approximately 17%. Measurements were conducted on mouse liver and brain tissues before and after erlotinib administration. Erlotinib is delivered to the brain, although the concentration is 10⁴ times smaller than that found in the liver.     

Trypsin and MALDI matrix pre‐coated targets simplify sample preparation for mapping proteomic distributions within biological tissues by imaging mass spectrometry

Prefabricated surfaces containing α‐cyano‐4‐hydroxycinnamic acid and trypsin have been developed to facilitate enzymatic digestion of endogenous tissue proteins prior to matrix‐assisted laser desorption/ionization (MALDI) imaging mass spectrometry (IMS). Tissue sections are placed onto slides that were previously coated with α‐cyano‐4‐hydroxycinnamic acid and trypsin. After incubation to promote enzymatic digestion, the tissue is analyzed by MALDI IMS to determine the spatial distribution of the tryptic fragments. The peptides detected in the MALDI IMS dataset were identified by Liquid chromatography‐tandem mass spectrometry/mass spectrometry. Protein identification was further confirmed by correlating the localization of unique tryptic fragments originating from common parent proteins. Using this procedure, proteins with molecular weights as large as 300 kDa were identified and their distributions were imaged in sections of rat brain. In particular, large proteins such as myristoylated alanine‐rich C‐kinase substrate (29.8 kDa) and spectrin alpha chain, non‐erythrocytic 1 (284 kDa) were detected that are not observed without trypsin. The pre‐coated targets simplify workflow and increase sample throughput by decreasing the sample preparation time. Further, the approach allows imaging at higher spatial resolution compared with robotic spotters that apply one drop at a time. Copyright © 2016 John Wiley & Sons, Ltd.     

The multiple conformational charge states of zinc(II) coordination by 2His‐2Cys oligopeptide investigated by ion mobility‐mass spectrometry,density functional theory and theoretical collision cross sections

Whether traveling wave ion mobility‐mass spectrometry (IM‐MS), B3LYP/LanL2DZ density functional theory, and ion size scaled Lennard‐Jones (LJ) collision cross sections (CCS) from the B3LYP optimized structures could be used to determine the type of Zn(II) coordination by the oligopeptide acetyl‐His₁‐Cys₂‐Gly₃‐Pro₄‐Tyr₅‐His₆‐Cys₇ (amb₅) was investigated. The IM‐MS analyses of a pH titration of molar equivalents of Zn(II):amb₅ showed that both negatively and positively charged complexes formed and coordination of Zn(II) increased as the His and Cys deprotonated near their pKa values. The B3LYP method was used to generate a series of alternative coordination structures to compare with the experimental results. The method predicted that the single negatively charged complex coordinated Zn(II) in a distorted tetrahedral geometry via the 2His‐2Cys substituent groups, whereas, the double negatively charged and positively charged complexes coordinated Zn(II) via His, carbonyl oxygens and the C‐terminus. The CCS of the B3LYP complexes were calculated using the LJ method and compared with those measured by IM‐MS for the various charge state complexes. The LJ method provided CCS that agreed with five of the alternative distorted tetrahedral and trigonal bipyramidal coordinations for the doubly charged complexes, but provided CCS that were 15 to 31 Ų larger than those measured by IM‐MS for the singly charged complexes. Collision‐induced dissociation of the Zn(II) complexes and a further pH titration study of amb_5B, which included amidation of the C‐terminus, suggested that the 2His‐2Cys coordination was more significant than coordinations that included the C‐terminus. Copyright © 2016 John Wiley & Sons, Ltd.     

Automatic recalibration and processing of tandem mass spectra using formula annotation

High accuracy, high resolution tandem mass spectrometry (MS/MS) is becoming more common in analytical applications, yet databases of these spectra remain limited. Databases require good quality spectra with sufficient compound information, but processing, calibration, noise reduction and retrieval of compound information are time‐consuming tasks that prevent many contributions. We present a comprehensive workflow for the automatic processing of MS/MS using formula annotation for recalibration and cleanup to generate high quality spectra of standard compounds for upload to MassBank ( www.massbank.jp ). Compound information is retrieved via Internet services. Reference standards of 70 pesticides were measured at various collision energies on an LTQ‐Orbitrap XL to develop and evaluate the workflow. A total of 944 resulting spectra are now available on MassBank. Evidence of nitrogen adduct formation during MS/MS fragmentation processes was found, highlighting the benefits high accuracy MS/MS offers for spectral interpretation. A database of recalibrated, cleaned‐up spectra resulted in the most correct spectra ranked in first place, regardless of whether the search spectra were recalibrated or not, whereas the average rank of the correct molecular formula was improved from 2.55 (uncalibrated) to 1.53 when using recalibrated MS/MS data. The workflow is available as an R package RMassBank capable of generating MassBank records from raw MS and MS/MS data and can be adjusted to process data acquired with different settings and instruments. This workflow is a vital step towards addressing the need for more high quality, high accuracy MS/MS spectra in spectral databases and provides important information for spectral interpretation. Copyright © 2012 John Wiley & Sons, Ltd.