Fast Olefin Metathesis at Low Catalyst Loading

Reactions of the Grubbs 3rd generation complexes [RuCl₂(NHC)(Ind)(Py)] (N‐heterocyclic carbene (NHC)=1,3‐bis(2,4,6‐trimethylphenylimidazolin)‐2‐ylidene (SIMes), 1,3‐bis(2,6‐diisopropylphenylimidazolin)‐2‐ylidene (SIPr), or 1,3‐bis(2,6‐diisopropylphenylimidazol)‐2‐ylidene (IPr); Ind=3‐phenylindenylid‐1‐ene, Py=pyridine) with 2‐ethenyl‐N‐alkylaniline (alkyl=Me, Et) result in the formation of the new N‐Grubbs–Hoveyda‐type complexes 5 (NHC=SIMes, alkyl=Me), 6 (SIMes, Et), 7 (IPr, Me), 8 (SIPr, Me), and 9 (SIPr, Et) with N‐chelating benzylidene ligands in yields of 50–75 %. Compared to their respective, conventional, O‐Grubbs–Hoveyda complexes, the new complexes are characterized by fast catalyst activation, which translates into fast and efficient ring‐closing metathesis (RCM) reactivity. Catalyst loadings of 15–150 ppm (0.0015–0.015 mol %) are sufficient for the conversion of a wide range of diolefinic substrates into the respective RCM products after 15 min at 50 °C in toluene; compounds 8 and 9 are the most catalytically active complexes. The use of complex 8 in RCM reactions enables the formation of N‐protected 2,5‐dihydropyrroles with turnover numbers (TONs) of up to 58 000 and turnover frequencies (TOFs) of up to 232 000 h^?1; the use of the N‐protected 1,2,3,6‐tetrahydropyridines proceeds with TONs of up to 37 000 and TOFs of up to 147 000 h^?1; and the use of the N‐protected 2,3,6,7‐tetrahydroazepines proceeds with TONs of up to 19 000 and TOFs of up to 76 000 h^?1, with yields for these reactions ranging from 83–92 %.     

A Ruthenium‐Based Biomimetic Hydrogen Cluster for Efficient Photocatalytic Hydrogen Generation from Formic Acid

A ruthenium‐based biomimetic hydrogen cluster, [Ru₂(CO)₆(μ‐SCH₂CH₂CH₂S)] ( 1 ), has been synthesized and, in the presence of the P ligand tri(o‐tolyl)phosphine, demonstrated efficient photocatalytic hydrogen generation from formic acid decomposition. Turnover frequencies (TOFs) of 5500 h^?1 and turnover numbers (TONs) over 24 700 were obtained with less than 50 ppm of the catalyst, thus representing the highest TOFs for ruthenium complexes as well as the best efficiency for photocatalytic hydrogen production from formic acid. Moreover, 1 showed high stability with no significant degradation of the photocatalyst observed after prolonged photoirradiation at 90 °C.     

Environmentally‐Safe Conditions for a Palladium‐Catalyzed Direct C3‐Arylation with High Turn Over Frequency of Imidazo[1,2‐b]pyridazines Using Aryl Bromides and Chlorides

Pd(OAc)₂ was found to catalyze very efficiently the direct arylation of imidazo[1,2‐b]pyridazine at C3‐position under a very low catalyst loading and phosphine‐free conditions. The reaction can be performed in very high TOFs and TONs employing as little as 0.1–0.05 mol % catalyst using a wide range of aryl bromides. In addition, some electron‐deficient aryl chlorides were also found to be suitable substrates. Moreover, 31 examples of the cross couplings were reported using green, safe, and renewable solvents, such as pentan‐1‐ol, diethylcarbonate or cyclopentyl methyl ether, without loss of efficiency.     

s‐Triazine‐based hyperbranched polyethers: Synthesis,characterization, and properties

A series of s‐triazine‐based hyperbranched polyethers (HBPE) have been synthesized to obtain thermostability but flexible polymers by an interfacial polycondensation of different diols as A₂ and cyanuric chloride as B₃ monomers using A₂ + B₃ approach in the presence of a phase transfer catalyst. The polymerization reaction parameters are optimized, and the results indicate that the optimum conditions for the interfacial polycondensation are a 2:3 mole ratio of cyanuric chloride to diol using butanediol, benzyldimethylhexadecyl ammonium chloride as the catalyst, dichloromethane as the organic solvent, and a three‐step procedure with keeping the reaction mixture at different low temperatures for 2h/2h/5h. Other techniques such as high‐temperature solution, one‐step polycondensation, and transesterification were also carried out to synthesize the HBPE but proved to be not suitable due to large number of side reactions. The synthesized polymers were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, hydroxyl number determination, solution viscosity measurements, and GPC analysis. The thermal behavior of the hyperbranched polymer was investigated by thermogravimetric analysis and differential scanning calorimetry. All the results were compared with those from an analogous linear polyether, obtained from 2‐methoxy‐4,6‐dichloro‐s‐triazine and butanediol by using the same polymerization technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3994–4004, 2010     

High‐molecular‐weight poly(1,2‐propylene succinate): A soft biobased polyester applicable as an effective modifier of poly(l‐Lactide)

Poly(1,2‐propylene succinate) (PPS) having high molecular weight can be synthesized by multi‐step melt‐polycondensation of succinic acid (SA) and 1,2‐propylene glycol (PG) with various catalysts. The first step is noncatalytic esterification/oligomerization of the two monomers, followed by the second step of catalytic melt‐polycondensation. In this step, co‐catalyst systems of Zn(AcO)₂/Ge(OBu)₄ and Zn(AcO)₂/Ti(BuO)₄ are effective for obtaining PPS having middle molecular weights (>10.0 kDa). This middle‐molecular‐weight PPS is chain‐elongated in the third‐step polycondensation with Zn(AcO)₂ as the catalyst to obtain a molecular weight reaching 120 kDa. As verified by ¹H‐ and ¹³C‐NMR spectra combined with two‐dimensional experiments, PPS has a ω‐bis‐hydroxy structure where the PG units leave the secondary hydroxyl terminals in larger ratio than the primary hydroxyl terminals. The PPS polymers are amorphous in nature, showing T_g around −4 °C. PPS can be solution‐ and melt‐blended with poly(l ‐lactide) (PLLA). By melt‐blending a high‐molecular‐weight PPS in an amount of 7.5–15 wt %, the modulus of the PLLA films decreases below 2000 MPa and the tear strength increases twice, supporting the effectiveness of PPS polymer in imparting flexible nature to PLLA. PPS polymers can therefore be applicable as elastomeric or flexible plastic modifiers having a 100 % biobased content. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1795–1805     

Maximizing the Catalytic Activity of Nanoparticles through Monolayer Assembly on Nitrogen‐Doped Graphene

We report a facile method for assembly of a monolayer array of nitrogen‐doped graphene (NG) and nanoparticles (NPs) and the subsequent transfer of two layers onto a solid substrate (S). Using 3 nm NiPd NPs as an example, we demonstrate that NiPd‐NG‐Si (Si=silicon wafer) can function as a catalyst and show maximum NiPd catalysis for the hydrolysis of ammonia borane (H₃NBH₃, AB) with a turnover frequency (TOF) of 4896.8 h^?1 and an activation energy (E_a) of 18.8 kJ mol^?1. The NiPd‐NG‐S catalyst is also highly active for catalyzing the transfer hydrogenation from AB to nitro compounds, leading to the green synthesis of quinazolines in water. Our assembly method can be extended to other graphene and NP catalyst materials, providing a new 2D NP catalyst platform for catalyzing multiple reactions in one pot with maximum efficiency.     

Iterative tandem catalysis of racemic AB monomers

Racemic AB monomers encompassing a secondary hydroxy group and a methyl ester moiety were synthesized and converted to chiral polyesters by iterative tandem catalysis (ITC). The concurrent action of an enantioselective acylation catalyst (Novozym 435) and a racemization catalyst (Ru(Shvo)) results in the high conversion of the racemic monomers to enantio‐enriched polymers. Several factors are important for attaining high ee's and high molecular weights. The enantioselectivities observed for the novel AB monomers by Novozym 435 are high enough at 70 °C (E ratio ≥ 200) for the monomers to be useful for ITC. ITC of methyl 6‐hydroxyheptanoate showed that a catalyst loading of ～1.4 mol % Ru(Shvo), 25 mg Novozym 435/mmol AB monomer, and 0.5 mmol DMP/mmol monomer employing a monomer concentration of 1 mol/L gave a monomer conversion of 94%, an ee of 91%, and an M_p of 6.0 kg/mol. Application of these conditions to the other AB monomers revealed the sensitivity of the system. Reduced enantioselectivities were observed when longer reaction times were required for attaining high conversions. These long reaction times were necessary due to the slow (or absent) racemization activity of the Ru(Shvo) catalyst as a result of catalyst deactivation. Since quantitative conversions are crucial to attain high molecular weight polymers in polycondensation reactions, we could significantly improve the system by switching to isopropyl esters of the AB monomers and/or by strict exclusion of oxygen during the ITC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2721–2733, 2008     

Kinetics of the polycondensation and copolycondensation of bis(3‐hydroxypropyl) terephthalate and bis(4‐hydroxybutyl) terephthalate

The kinetics of the polycondensation and copolycondensation reactions of bis(3‐hydroxypropyl) terephthalate (BHPT) and bis(4‐hydroxybutyl) terephthalate (BHBT) as monomers were investigated at 270 °C in the presence of titanium tetrabutoxide as a catalyst. BHPT was prepared by the ester interchange reaction of dimethyl terephthalate and 1,3‐propanediol (1,3‐PD). Through the same method adopted for BHPT synthesis, BHBT was prepared with 1,4‐butanediol instead of 1,3‐PD. With second‐order kinetics applied for polycondensation, the rate constants of the polycondensation of BHPT and BHBT, k₁₁ and k₂₂, were calculated to be 4.08 and 4.18 min^?1, respectively. The rate constants of the cross reactions in the copolycondensation of BHPT and BHBT, k₁₂ and k₂₁, were calculated with results obtained from proton nuclear magnetic resonance spectroscopy analysis. The rate constants during the copolycondensation of BHPT and BHBT at 270 °C decreased in the order k₁₂ > k₂₂ > k₁₁ > k₂₁, indicating that the reactivity of BHBT was larger than that of BHPT at 270 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2435–2441, 2002     

Mechanistic Investigation of Catalyst‐Transfer Suzuki–Miyaura Condensation Polymerization of Thiophene–Pyridine Biaryl Monomers with the Aid of Model Reactions

We have investigated the requirements for efficient Pd‐catalyzed Suzuki–Miyaura catalyst‐transfer condensation polymerization (Pd‐CTCP) reactions of 2‐alkoxypropyl‐6‐(5‐bromothiophen‐2‐yl)‐3‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)pyridine ( 12 ) as a donor–acceptor (D –A) biaryl monomer. As model reactions, we first carried out the Suzuki–Miyaura coupling reaction of X–Py–Th–X′ (Th=thiophene, Py=pyridine, X, X′=Br or I) 1 with phenylboronic acid ester 2 by using tBu₃PPd⁰ as the catalyst. Monosubstitution with a phenyl group at Th‐I mainly took place in the reaction of Br–Py–Th–I ( 1 b ) with 2 , whereas disubstitution selectively occurred in the reaction of I–Py–Th–Br ( 1 c ) with 2 , indicating that the Pd catalyst is intramolecularly transferred from acceptor Py to donor Th. Therefore, we synthesized monomer 12 by introduction of a boronate moiety and bromine into Py and Th, respectively. However, examination of the relationship between monomer conversion and the M_n of the obtained polymer, as well as the matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectra, indicated that Suzuki–Miyaura coupling polymerization of 12 with (o‐tolyl)tBu₃PPdBr initiator 13 proceeded in a step‐growth polymerization manner through intermolecular transfer of the Pd catalyst. To understand the discrepancy between the model reactions and polymerization reaction, Suzuki–Miyaura coupling reactions of 1 c with thiopheneboronic acid ester instead of 2 were carried out. This resulted in a decrease of the disubstitution product. Therefore, step‐growth polymerization appears to be due to intermolecular transfer of the Pd catalyst from Th after reductive elimination of the Th‐Pd‐Py complex formed by transmetalation of polymer Th–Br with (Pin)B–Py–Th–Br monomer 12 (Pin=pinacol). Catalysts with similar stabilization energies of metal–arene η²‐coordination for D and A monomers may be needed for CTCP reactions of biaryl D–A monomers.     

Solvent‐free and nonisocyanate melt transurethane reaction for aliphatic polyurethanes and mechanistic aspects

A novel melt transurethane polycondensation route for polyurethanes under solvent‐free and nonisocyanate condition was developed for soluble and thermally stable aliphatic or aromatic polyurethanes. The new transurethane process was investigated for A + B, A‐A + B, and A‐A + B‐B (A‐urethane and B‐hydroxyl) ‐type condensation reactions, and also monomers bearing primary and secondary urethane or hydroxyl functionalities. The transurethane process was confirmed by ¹H and ¹³C NMR, and molecular weight of the polymers were obtained as M_n = 10–15 × 10³ and M_w = 15–45 × 10³ g/mol. The mechanistic aspects of the melt transurethane process and role of the catalyst were investigated using model reactions, ¹H NMR, and MALDI‐TOF‐MS. The model reactions indicated the occurrence of 97% reaction in the presence of catalyst, whereas its absence gave only less than 2% of the product. The polymer samples were subjected for end‐group analysis using MALDI‐TOF‐MS, which confirms the Ti‐catalyst mediated nonisocyanate pathway in the melt transurethane process. Almost all the polyurethanes were stable up to 280 °C, and the T_g of the polyurethanes can be easily fine‐tuned from ?30 to 120 °C by using appropriate diols in the melt transurethane process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2445–2458, 2008     

Synthesis of poly(ω‐pentadecalactone)‐b‐poly(acrylate) diblock copolymers via a combination of enzymatic ring‐opening and RAFT polymerization techniques

Herein the first reported preparation of diblock copolymers of the polyethylene‐like polyester poly(ω‐pentadecalactone) (PPDL) via a combination of enzymatic ring‐opening polymerization (eROP) and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization techniques is described. PPDL was synthesized via eROP using Novozyme 435 as a catalyst and a bifunctional initiator/chain transfer agent (CTA) appropriate for the eROP of ω‐pentadecalactone (PDL) and RAFT polymerization of acrylic and styrenic monomers. Chain growth of the PPDL macro‐CTA was performed to prepare acrylic and styrenic diblock copolymers of PPDL, and demonstrates a facile, metal‐free, and “greener” alternative to preparing acrylic diblock copolymers of polyethylene (PE). Diblock copolymer architecture was substantiated via analysis of ¹H NMR spectroscopic, UV‐GPC chromatographic, DSC onset crystallization (T_c), and MALDI‐ToF mass spectrometric data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3326–3335     

Synthesis of AB‐type block copolymers containing benzoxazole and anthracene groups by ATRP and fluorescent property

Two functional monomers, methacrylic acid 4‐(2‐benzoxazol)‐benzyl ester (MABE) containing the benzoxazole group and 4‐(2‐(9‐anthryl))‐vinyl‐styrene (AVS) containing the anthracene group were synthesized by rational design. The MABE was polymerized via atom transfer radical polymerization (ATRP) using ethyl 2‐bromoisobutyrate (EBIB) as initiator in CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) catalyst system; block copolymers poly(MABE‐b‐AVS) was obtained, which was conducted by using poly(MABE) as macro‐initiator, AVS as the second monomer, and CuBr/PMDETA as catalyst. The constitute of two monomers in block copolymers poly(MABE‐b‐AVS) by ATRP could be adjusted, that is the constitute of the benzoxazole group and the anthracene group could be controlled in AB‐type block copolymers. Moreover, the fluorescent properties of homopolymers poly(MABE) and block copolymers poly(MABE‐b‐AVS) were discussed herein. With the excitation at λ_ex = 330 nm, the fluorescent emission spectrum of poly(MABE) solution showed emission at 375 nm corresponding to the benzoxazole‐based part; with the same excitation, the fluorescent emission spectrum of poly(MABE‐b‐AVS) solution showed a broad peek at 330–600 nm when the monomer AVS to the total monomers mole ratio was 0.31, and the fluorescent emission spectrum of poly(MABE‐b‐AVS) in film state only showed one peak at 525 nm corresponding to the anthracene‐based unit that indicated a complete energy transfer from the benzoxazole group to the anthracene group. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3894–3901, 2007     

Synthesis and characterization of highly fluorinated poly(phthalazinone ether)s based on AB‐type monomers

Four different fluorinated methyl‐ and phenyl‐substituted 4‐(4‐hydroxyphenyl)‐2‐(pentafluorophenyl)‐phthalazin‐1(2H)‐ones, AB‐type phthalazinone monomers, have been successfully synthesized by nucleophilic addition–elimination reactions of methyl‐ and phenyl‐substituted 2‐((4‐hydroxy)benzoyl)benzoic acid with 1‐(pentafluorophenyl)hydrazine. Under mild reaction conditions, the AB‐type monomers underwent self‐condensation polymerization reactions successfully and gave fluorinated poly(phthalazinone ether)s with high molecular weights. Detailed structural characterization of the AB‐type monomers and fluorinated polymers was determined by ¹H NMR, ¹⁹F NMR, FTIR, and GPC. The solubility, thermal properties, mechanical properties, water contact angles, and optical absorption of the polymers were evaluated. The polymers had high T_gs varying from 337 to 349 °C and decomposition temperatures (T_{d, 25} wt %) above 409 °C. Tough, flexible films were cast from THF and chloroform solutions. The films showed excellent tensile strengths ranging from 70 to 85 MPa with good hydrophobicities with water contact angles higher than 95.5 °C. The polymers had absorption edges below 340 nm and very low absorbance per cm at higher wavelengths 500–2500 nm. These results indicate that the polymers are promising as high performance materials, for example, membranes and hydrophobic materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1761–1770     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

Synthesis of poly(5,6‐difluoro‐2,1,3‐benzothiadiazole‐alt‐9,9‐dioctyl‐fluorene) via direct arylation polycondensation

Poly(5,6‐difluoro‐2,1,3‐benzothiadiazole‐alt‐9,9‐dioctylfluorene) was successfully synthesized via direct arylation polycondensation of 5,6‐difluoro‐2,1,3‐benzothiadiazole and 2,7‐dibromo‐9,9‐dioctylfluorene. The reaction conditions were optimized, and a polymer with number‐average molecular weight (M_n) of 41,000 was obtained by using Pd(OAc)₂, P^tBu₂Me‐HBF₄, pivalic acid, K₂CO₃, and toluene as catalyst, ligand, additive, base, and solvent, respectively. The polycondensation was also performed with 5,6‐dioctyloxy‐2,1,3‐benzothiadiazole or 2,1,3‐benzothiadiazole as the comonomer, and the results indicate that the introduction of electron‐withdrawing fluorine atoms at the ortho‐positions to the C? H bonds is essential for the reactivity of the direct arylation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2367–2374     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

Cobalt‐mediated catalytic chain‐transfer polymerization (CCTP) in water and water/alcohol solution

This article describes the use of cobalt‐mediated catalytic chain transfer in aqueous solution under fed conditions for the preparation of macromonomers of acidic, hydroxy, and zwitterionic functional monomers. Use of a batch reaction leads to hydrolysis of catalyst, a mixture of mechanisms and poor control of the reaction. A feed process is described that adds catalyst as a solution in monomer over the course of the reaction. The feed process is applied to a range of monomers of methacrylic acid ( 2 ), 2‐aminoethyl methacrylate hydrochloride ( 3 ), 2‐hydroxyethyl methacrylate ( 4 ), 2‐methacryloxyethyl phosphoryl choline ( 5 ), glycerol monomethyl methacrylate ( 6 ), and 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐D ‐glucofuranose ( 7 ). Use of the feed process for water‐soluble monomers in conjunction with 1 as a catalytic chain‐transfer agent gives high‐conversion, > 90%, water‐soluble macromonomers. The number‐average molecular mass (M_n was determined by integration of the ¹H NMR spectrum comparing the vinylic end group with the remainder of the backbone. Pseudo‐Mayo plots were constructed by measuring the M_n at high conversion as a function of [monomer]/[catalyst] to give observed chain‐transfer constants of 1120, 958, and 1058 for 4, 6, and 2, respectively. All products were obtained as relatively high‐solid, homogeneous, low‐viscosity aqueous solutions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2378–2384, 2001     

Palladium on carbon‐catalyzed direct C—H arylation polycondensation of 3,4‐ethylenedioxythiophene with various dibromoarenes

We have demonstrated a direct arylation polycondensation of 3,4‐ethylenedioxythiophene with 2,7‐dibromo‐9,9‐dioctylfluorene using palladium on carbon (Pd/C) as a catalyst. Pd/C is a low‐cost solid‐supported palladium catalyst, giving one of the effective catalytic systems for direct arylation. The Pd/C‐catalyzed direct arylation polycondensation with acetic acid/potassium carbonate in N,N‐dimethylacetamide furnished a high molecular weight π‐conjugated alternating copolymer of EDOT‐fluorene (M_n = 89,300, M_w/M_n = 3.27) in high yield. The polycondensation of EDOT with various dibromoarenes was also achieved, giving EDOT‐carbazole, EDOT‐dialylamine, and EDOT‐bithiophene polymers. Optical and electrochemical properties of the polymers were also discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1183–1188     

Controlled Synthesis of Poly(p‐phenylene) Using a Zincate Complex,tBu4ZnLi2

Well‐defined poly(2,5‐dihexyloxyphenylene‐1,4‐diyl) (PPP) is successfully synthesized by the Negishi catalyst‐transfer polycondensation (NCTP) using dilithium tetra(tert‐butyl)zincate (^t Bu₄ZnLi₂). The obtained PPP possesses the number‐averaged molecular weight (M _n) values in the range of 2100–22 000 and the molar‐mass dispersity (Ð _M) values in the range of 1.09–1.23. In addition, block copolymers containing PPP and poly(3‐hexylthiophene) (P3HT) segments (PPP‐b‐P3HT) are synthesized to confirm the feasibility of chain extension between the different monomers based on NCTP.

     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894