Corrosion behavior of PEO-treated AZ31 Mg alloy in chloride solution

Corrosion behavior and resistance of plasma electrolyte oxidation (PEO)-treated AZ31 Mg alloy were investigated by immersion and potentiodynamic polarization tests in 0.5 M NaCl solution in view of the PEO film thickness and sealing treatment of the PEO films in boiling water. The PEO films were formed using pulse current for various durations in 1 M NaOH?+?0.5 M NaF solution. Filiform corrosion was observed during the immersion test while pitting corrosion occurred during the potentiodynamic polarization test, irrespective of sealing treatment of the PEO films. Corrosion resistance of AZ31 Mg alloy was improved remarkably by the formation of thicker PEO films and their sealing treatments.     

Effects of serum proteins on corrosion behavior of ISO 5832–9 alloy modified by titania coatings

Stainless steel ISO 5832–9 type is often used to perform implants which operate in protein-containing physiological environments. The interaction between proteins and surface of the implant may affect its corrosive properties. The aim of this work was to study the effect of selected serum proteins (albumin and γ-globulins) on the corrosion of ISO 5832–9 alloy (trade name M30NW) which surface was modified by titania coatings. These coatings were obtained by sol–gel method and heated at temperatures of 400 and 800 °C. To evaluate the effect of the proteins, the corrosion tests were performed with and without the addition of proteins with concentration of 1 g L^?1 to the physiological saline solution (0.9 % NaCl, pH 7.4) at 37 °C. The tests were carried out within 7 days. The following electrochemical methods were used: open circuit potential, linear polarization resistance, and electrochemical impedance spectroscopy. In addition, surface analysis by optical microscopy and X-ray photoelectron spectroscopy (XPS) method was done at the end of weekly corrosion tests. The results of corrosion tests showed that M30NW alloy both uncoated and modified with titania coatings exhibits a very good corrosion resistance during weekly exposition to corrosion medium. The best corrosion resistance in 0.9 % NaCl solution is shown by alloy samples modified by titania coating annealed at 400 °C. The serum proteins have no significant effect onto corrosion of investigated biomedical steel. The XPS results confirmed the presence of proteins on the alloy surface after 7 days of immersion in protein-containing solutions.     

Electrochemical characteristics and interfacial contact resistance of Ni-P/TiN/PTFE coatings on Ti bipolar plates

The Ni-P/TiN/PTFE (poly tetra fluoroethylene) composite coatings were prepared by electroless plating method on Ti plate, which was used as bipolar plates of proton exchange membrane fuel cells (PEMFCs). The morphology, crystallographic texture, electrochemical corrosion, contact resistance, and hydrophobic property of the Ti bipolar plates with coatings were investigated. The results revealed that Ni-P/TiN/PTFE coating had a dense surface morphology, uniform distribution of composite particles. Ti with coating showed 0.48 μA cm² of corrosion current in the simulated solution of PEMFCs and 6 mΩ cm² of interfacial contact resistance (ICR). The hydrophobicity test showed that the coating interface was flat and the wetting angle was 112.4°. In conclusion, The Ni-P/TiN/PTFE composite coatings exhibit superior improvement in corrosion resistance, interface hydrophobicity, and conductivity to Ni-P, Ni-P/TiN, and Ni-P/PTFE coatings. The Ni-P/TiN/PTFE coating was suited for bipolar plate surface modification of bipolar plates.     

hytic Acid Conversion Coatings of Magnesium

A chrome‐free conversion coating treatment for magnesium by phytic acid solution was developed. The immersion experiments were used for evaluating the effects of the processing parameters (such as conversion temperature and time, concentration and pH value of phytic acid solution) on the corrosion resistance of the phytic acid conversion coating. The morphologies and compositions of the coatings were determined by SEM and EDS respectively. The experimental results indicated that the corrosion resistance of the conversion coating formed in the solution containing 0.5% phytic acid at 25°C and pH=4 for 30 min was higher than that of natural oxide, and the conversion coating formed on the surface of magnesium was of multilayer mainly consisting of Mg, C, O and P. The thicknesses of the conversion coatings were approximately 1.0–15 µm and the conversion coatings presented obvious network‐like cracks. The electrochemical potentiodynamic polarization experiment indicated that the free corrosion potential of the magnesium with phytic acid conversion coating was increased, and its corrosion current and corrosion rate declined in 3.5% NaCl solution. Phytic acid conversion coating could improve the electrochemical property of magnesium and provide effective protection, which can improve the corrosion resistance of magnesium.     

A study on the electrochemical polymerization, characterization, and corrosion protection of o-toluidine on steel

Poly(o-toluidine) (POT) coatings were electrochemically synthesized on 304 stainless steel using cyclic voltammetric method. These coatings were characterized by Fourier transform infrared spectroscopy, UV–vis absorption spectroscopy, and cyclic voltammetry. The corrosion performance of POT coating in aqueous 3 wt% sodium chloride was assessed by the electrochemical techniques such as open circuit potential measurements, potentiodynamic polarization technique, cyclic potentiodynamic polarization measurements, and electrochemical impedance spectroscopy. The results reveal that POT coating on 304 stainless steel prevents general and localized corrosion, and reduces the exchange current density almost by a factor of 45 than bare 304 stainless steel.     

Poly(3-octylthiophene) and polystyrene blends thermally treated as coatings for corrosion protection of stainless steel 304

The effect of thermal annealing of poly(3-octylthiophene) (P3OT) and polystyrene (PS) blend coatings on the corrosion inhibition of stainless steel in a 0.5 M NaCl solution was investigated. P3OT was synthesized by direct oxidation of the 3-octylthiophene monomer with ferric chloride (FeCl₃) as oxidant. Stainless steel electrodes with mirror finish were coated with P3OT/PS blend by drop-casting technique. In order to study the temperature effect on the function like physical barrier against the corrosive species of P3OT/PS polymeric blend, the coatings were thermally annealed at three different temperatures (55?°C, 80?°C, and 100?°C). The corrosion behavior of P3OT/PS-coated stainless steel was investigated in 0.5 M NaCl at room temperature, by using potentiodynamic polarization curves, linear polarization resistance (LPR), and electrochemical impedance spectroscopy. The LPR values indicated that, at 100?°C, P3OT/PS coatings showed a better protection of the 304 stainless steel in 0.5 M NaCl; the corrosion rate diminished in two orders of magnitude with regard to the bare stainless steel. The superficial morphology of the coatings before and after the corrosive environment was researched by atomic force microscopy, optic microscopy, and scanning electronic microscopy. Morphological study showed that the increased temperature benefited the integration of the two polymeric phases, which improved the barrier properties of the coatings. The coating/metal adhesion and the coating thickness were evaluated. The temperature increases the adhesion degree coating/substrate; thus, the coating annealed at 100?°C showed the best adhesion.     

Preparation and characterization of anticorrosion Ormosil sol–gel coatings for aluminum alloy

Organically modified silicate (Ormosil) coatings have been synthesized through the sol–gel method for corrosion protection of aluminum alloy. Silica-based unmodified coatings were also designed to investigate the effect of tetraethoxysilane (TEOS) content on the properties of the coatings. The surface morphology of the coatings was characterized by scanning electron microscopy. The corrosion resistance was evaluated by immersion test, electrochemical impedance spectroscopy and potentiodynamic polarization measurements. In addition, the surface potential differences of the coated samples were determined by scanning Kelvin probe. The results showed that a better corrosion resistance of unmodified coating was prepared by controlling the TEOS/EtOH/H₂O molar ratio of 0.109/1/1.52. Ormosil coatings provided excellent barrier properties and corrosion resistance in comparison with the unmodified sol–gel coatings. The Ormosil coating modified with triethoxyoctylsilane exhibited corrosion resistance properties superior to the other Ormosil coatings after exposure to 3.5 wt% NaCl solution for 10 days.     

(NaPO3)6对AZ91D镁合金微弧氧化陶瓷层电化学腐蚀特性的影响

在Na2SiO3-KOH电解液体系中添加一定量的(NaPO3)6, 利用微弧氧化(MAO)技术在AZ91D 镁合金表面制备了原位生长的陶瓷层. 采用动电位极化和电化学阻抗谱(EIS)技术研究了添加(NaPO3)6前后, 制备的陶瓷层在3.5%(w) NaCl溶液中的室温电化学行为. 结果表明, 添加(NaPO3)6后, 陶瓷层的自腐蚀电位显著上升, 自腐蚀电流密度明显减小. 这主要是由于(NaPO3)6增加了反应过程中基体镁合金表面的“氧空位”和溶液中PO3-4的含量, 促使元素Mg在金属/膜层(M/F)界面上快速形成相应氧化物, 从而增加了陶瓷层的厚度和致密性. 根据电化学反应体系和陶瓷层的特殊结构, 建立了合理的等效电路, 并结合EIS 数据, 分析了添加(NaPO3)6提高陶瓷层耐电化学腐蚀性能的机理.     

Inhibition of mild steel corrosion in 5 % HCl solution by 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione

A new corrosion inhibitor, namely 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione (5-HTT), has been synthesized and its influence on corrosion inhibition of mild steel in 5 % HCl solution has been studied using weight loss method and electrochemical measurements. Potentiodynamic polarization measurements clearly reveal that the investigated inhibitor is of mixed type, and it inhibits the corrosion of the steel by blocking the active site of the metal. Changes in impedance parameters were indicative of adsorption of 5-HTT on the metal surface, leading to the formation of protective films. The degree of the surface coverage of the adsorbed inhibitors was determined by weight loss measurements, and it was found that the adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of the temperature on the corrosion behavior with addition of 5 × 10^?4 M of the inhibitor was studied in the temperature range 30–60 °C. The reactivity of this compound was analyzed through theoretical calculations based on density functional theory to explain the different efficiency of these compounds as a corrosion inhibitor.     

Inhibition effect of cerium in hybrid sol–gel films on aluminium alloy AA2024

Aluminium alloys such as AA2024 are susceptible to severe corrosion attack in aggressive solutions (e.g. chlorides). Conversion coatings, like chromate, or rare earth conversion coatings are usually applied in order to improve corrosion behaviour of aluminium alloys. Methacrylate‐based hybrid films deposited with sol–gel technique might be an alternative to conversion coatings. Barrier properties, paint adhesion and possibly self‐healing ability are important aspects for replacement of chromate‐based pre‐treatments. This work evaluates the behaviour of cerium as corrosion inhibitor in methacrylate silane‐based hybrid films containing SiO₂ nano‐particles on AA2024. Hybrid films were deposited on aluminium alloy AA2024 by means of dip‐coating technique. Two different types of coating were applied: a non‐inhibited film consisting of two layers (non‐inhibited system) and a similar film doped with cerium nitrate in an intermediate layer (inhibited system). The film thickness was 5 µm for the non‐inhibited system and 8 µm for the inhibited system. Film morphology and composition were investigated by means of GDOES (glow discharge optical emission spectroscopy). Moreover, GDOES qualitative composition profiles were recorded in order to investigate Ce content in the hybrid films as a function of immersion time in 0.05 M NaCl solution. The electrochemical behaviour of the hybrid films was studied in the same electrolyte by means of EIS technique (electrochemical impedance spectroscopy). Electrochemical measurements provide evidence that the inhibited system containing cerium displays recovery of electrochemical properties. This behaviour is not observed for the non‐inhibited coating. GDOES measurements provide evidence that the behaviour of inhibited system can be related to migration of Ce species to the substrate/coating interface. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of thermal annealing of poly(3-octylthiophene) films covered stainless steel on corrosion properties

The effect of thermal annealing of poly(3-octylthiophene) (P3OT) coatings on the corrosion inhibition of stainless steel in an NaCl solution was investigated. P3OT was synthesized by direct oxidation of the 3-octylthiophene monomer with ferric chloride (FeCl₃) as oxidant. P3OT films were deposited by drop-casting technique onto 304 stainless steel electrode (304SS). 304SS coated with P3OT films were thermally annealed during 30 h at different temperatures (55°C, 80°C, and 100°C). The corrosion resistance of stainless steel coated with P3OT in 0.5 M NaCl aqueous solution at room temperature was investigated by using potentiodynamic polarization curves, linear polarization resistance, and electrochemical impedance spectroscopy. The results indicated that the thermal treatment at 80°C and 100°C of P3OT films improved the corrosion resistance of the stainless steel in NaCl solution; the speed of corrosion diminished in an order of magnitude with regard to the 304SS. In order to study the temperature effect in the morphology of the coatings before and after the corrosive environment and correlate it with corrosion protection, atomic force microscopy and scanning electron microscopy were used. Morphological study showed that when the films are heated, the grain size increased and a denser surface was obtained, which benefited the barrier properties of the film.     

Electrochemical Behavior of Dental Ni‐Cr Wirolloy Coated with Eco‐friendly Films in Artificial Saliva

The electrochemical corrosion behavior of the non‐precious Ni‐Cr Wirolloy, being used in dentistry, was investigated before and after applying of two types of eco‐friendly coatings, polyvinyl silsesquioxane (PVS) and nano‐hydroxyapatite (nHAP) separately in artificial saliva solution at 37 °C for 14 d of immersion. The study aimed to investigate the effectiveness of the introduced coating films in enhancing the corrosion resistance of the alloy, and in decreasing the leaching of the toxic Ni ions from the alloy into the environment. The electrochemical corrosion investigation methods used are; open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. The evaluated results revealed that the electrochemically coated alloy with PVS. prepared at cathodic potential showed higher corrosion resistance and more stable film compared to that prepared by conventional dip‐coating method. At the same time, the nHAP electrochemically coated film provided the best anti‐corrosion properties over all examined time intervals. The obtained results were confirmed via surface analysis, which assured the formation of the prepared coatings on the alloy surface. Chemical analysis of the corrosion product/solutions showed that the effect of electrochemically deposited nHAP and PVS. polymer films in suppression of Ni ions leaching is similar and slightly higher than that of the chemically coated PVS. one; however, all of them are efficient in decreasing the leaching of the risky Ni ions into the solution.     

Electrochemical and structural characterization of sputter-deposited Mg–Nb and Mg–Nb–Al–Zn alloy films

Nanocrystalline Mg–Nb and Mg–Nb–Al–Zn alloy films were deposited by dc magnetron sputtering on glass and quartz substrates in a wide range of niobium concentrations from 6 to 80 at.%. Structural, electrochemical and corrosion properties of the films were studied by X-ray diffraction, dc voltammetry, electrochemical impedance spectroscopy and electrochemical quartz crystal microbalance. Development of body-centred cubic Nb structure in the Mg–Nb alloy matrix yielded the effects of lattice contraction, grain refining and electrochemical passivity. The measurements showed high corrosion resistance of the films in alkaline solutions when niobium content was one third or more. An increased corrosion resistance was achieved by introducing minor amounts of Al (ca. 2 at.%). In particular, such Al effect was pronounced at lower Nb concentrations (20 to 30 at.%). Semiconductor properties of spontaneously formed oxide on Mg–Nb alloy were studied by Mott–Schottky plots, which indicated highly doped n-type oxide structures on Mg–Nb surface. The paper fills some gap in understanding of niobium–magnesium systems, which show potential for applications in hydrogen storage, switchable mirrors and corrosion protection.     

Corrosion resistance and cytotoxicity of a MgF2 coating on biomedical Mg–1Ca alloy via vacuum evaporation deposition method

To reduce the biocorrosion rate and enhance the biocompatibility by surface modification, MgF₂ coatings were prepared on Mg–1Ca alloy using vacuum evaporation deposition method. The average thickness of the coating was about 0.95 µm. The results of immersion test and electrochemical test indicated that the corrosion rate of Mg–1Ca alloy was effectively decreased after coating with MgF₂. The MgF₂ coating induced calcium phosphate deposition on Mg–1Ca alloy. After 72 h culture, MG63 cells and MC3T3‐E1 cells were well spread on the surface of the MgF₂‐coated Mg–1Ca alloy, while few cells were observed on uncoated Mg–1Ca alloy samples. In summary, MgF₂ coating showed beneficial effects on the corrosion resistance and thus improved cell response of the Mg–1Ca alloy effectively and should be a good surface modification method for other biomedical magnesium alloys. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization and corrosion resistance of pure Mg modified by micro‐arc oxidation using phosphate electrolyte with/without NaOH

Magnesium and its alloys have been suggested as potential absorbable implant materials due to their excellent biodegradability and biocompatibility. Current researchers focus on reducing the rapid corrosion rate of Mg and its alloys by alloying and surface modification. To improve the corrosion resistance, pure Mg is modified by micro‐arc oxidation (MAO) in phosphate electrolyte containing sodium hydroxide and its properties are compared with those formed using only phosphate or sodium hydroxide as electrolytes. A uniform and stable coating layer is formed on Mg after MAO treatment in phosphate electrolyte containing sodium hydroxide. The corrosion resistance of MAO‐coated Mg is evaluated by potentiodynamic polarization study and immersion test. The results reveal that MAO coating enables a good improvement in corrosion resistance, and among them, coatings treated using phosphate electrolyte containing sodium hydroxide offer the best performance. Copyright © 2013 John Wiley & Sons, Ltd.     

Electropolymerized coatings of polyaniline on copper by using the galvanostatic method and their corrosion protection performance in HCl medium

The synthesis of polyaniline coatings on the copper (Cu) surface has been investigated by using the galvanostatic method. The synthesized coatings were characterized by Fourier transform infrared spectroscopy, UV–visible absorption spectrometry and scanning electron microscopy. The anticorrosion performances of polyaniline coatings were investigated in 0.5 M HCl medium by the potentiodynamic polarization technique and electrochemical impedance spectroscopy. The corrosion rate of polyaniline‐coated Cu was found to be ～27 times lower than bare Cu, and potential corrosion increased from ?0.21 V versus Ag/AgCl for uncoated Cu to ?0.19 V versus Ag/AgCl for polyaniline‐coated Cu electrodes. Electrochemical measurements indicate that polyaniline coating has good inhibiting properties with a mean efficiency of ~96% at 10 mAcm^?2 current density applied on Cu corrosion in acid media. The results of this study clearly ascertain that the polyaniline has an outstanding potential to protect Cu against corrosion in an acidic environment. Copyright © 2014 John Wiley & Sons, Ltd.     

Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions

The biodegradable metals, including magnesium (Mg), are a convenient alternative to permanent metals but fast uncontrolled corrosion limited wide clinical application. Formation of a barrier coating on Mg alloys could be a successful strategy for the production of a stable external layer that prevents fast corrosion. Our research was aimed to develop an Mg stable oxide coating using plasma electrolytic oxidation (PEO) in silicate-based solutions. 99.9% pure Mg alloy was anodized in electrolytes contained mixtures of sodium silicate and sodium fluoride, calcium hydroxide and sodium hydroxide. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), contact angle (CA), Photoluminescence analysis and immersion tests were performed to assess structural and long-term corrosion properties of the new coating. Biocompatibility and antibacterial potential of the new coating were evaluated using U2OS cell culture and the gram-positive Staphylococcus aureus (S. aureus, strain B 918). PEO provided the formation of a porous oxide layer with relatively high roughness. It was shown that Ca(OH)₂ was a crucial compound for oxidation and surface modification of Mg implants, treated with the PEO method. The addition of Ca²⁺ ions resulted in more intense oxidation of the Mg surface and growth of the oxide layer with a higher active surface area. Cell culture experiments demonstrated appropriate cell adhesion to all investigated coatings with a significantly better proliferation rate for the samples treated in Ca(OH)₂-containing electrolyte. In contrast, NaOH-based electrolyte provided more relevant antibacterial effects but did not support cell proliferation. In conclusion, it should be noted that PEO of Mg alloy in silicate baths containing Ca(OH)₂ provided the formation of stable biocompatible oxide coatings that could be used in the development of commercial degradable implants.     

Characterization and corrosion properties of Ti‐O/HA composite coatings on Mg‐Zn alloy

Biodegradable magnesium alloys have been widely investigated in the field of biomaterials because they can be gradually dissolved and absorbed by the human body without long‐term existence. However, it was found that bare magnesium implants suffered from rapid corrosion. Surface modification is applied to improve the corrosion resistance and biocompatibility of magnesium implants. In this study, Ti‐O/HA composite coatings including typical flakes and nanofibers were fabricated on the Mg‐Zn alloy. The Ti‐O films were deposited on the magnesium alloy by direct current magnetron sputtering, and subsequently coated with HA flakes and nanofibers by electrochemical deposition, respectively. The obtained coatings were investigated by X‐ray diffraction, Fourier Transform Infrared spectroscopy and scanning electron microscopy. The corrosion resistance was evaluated by potentiodynamic polarization and hydrogen evolution tests in simulated body fluid at 37 °C. The results show that the compact Ti‐O films are composed of particles within the size of 100 nm, the outermost HA coatings are predominantly composed of HA and doped with Na⁺, Mg²⁺ ions and functional groups. The stronger diffraction and broader peak in nanofibers than typical flakes around 25.8° are ascribed to the preferential growth in orientation (002). The morphology of HA coatings changed from typical flakes into nanofibers with the addition of NaF, the mechanism to explain the difference is also discussed. The corrosion resistance was improved significantly by the coatings, the corrosion rates in the 10 days were 4.13, 1.77, 0.96 and 0.85 mm/y, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

In‐situ spectroelectrochemical study of the growth process of a lead decanoate coating as corrosion inhibitor for lead surfaces

We have monitored the growth of lead decanoate coatings in real time using electrochemical impedance spectroscopy (EIS) and synchrotron X‐ray diffraction in a unique environmental cell. The measurements involved the immersion of lead substrates in a 0.05 M sodium decanoate solution and the simultaneous collection of spectroscopic and electrochemical data as the coating deposits. In separate experiments, the surface morphology was investigated with SEM. The stratigraphy and thickness of layers after 6 h of treatment (?1.5 µm) was determined using RBS and ultra low energy SIMS combined with surface profilometry. Weight‐gain measurements were also carried out. Overall, the results are consistent with an initially parabolic process, due simply to diffusionally limited two‐dimensional growth across the surface from nucleation sites. This becomes linear over time as one‐dimensional vertical growth sets in at full coverage (layer closure). The X‐ray data and the microscopy show that the coating consists of fine, interlocking, randomly oriented flake‐shaped crystals, with no obvious epitaxial relationship to the lead substrate. The growth rate of the coating and its corrosion resistance are extremely sensitive to preparation method of the NaC₁₀ solution in ways which are still under investigation. Copyright © 2009 John Wiley & Sons, Ltd.     

An EQCM study on the influence of saccharin on the corrosion properties of nanostructured cobalt and cobalt-iron alloy coatings

Nanostructured cobalt (Co) and cobalt-iron (CoFe) alloy coatings were electrodeposited from sulfate solutions in the presence and absence of saccharin. The effects of saccharin on the corrosion behavior of Co and CoFe alloy coatings were investigated using the electrochemical quartz crystal microbalance (EQCM) technique coupled with cyclic voltammetry (CV) measurements. Saccharin was added to the electrolyte as a grain refiner and brightener. Interestingly, opposite corrosion behaviors were found for all nanostructured coatings in 0.1 M H₂SO₄ and 0.1 M NaOH. The use of saccharin as an additive in the plating solution accelerated the anodic reaction for all deposits in acidic medium. The mass decreases while dissolution rate increased with higher saccharin concentration. Meanwhile, formation of a thick passive film on the Co electrode surface were enhanced while a hindering effect was observed for CoFe alloy coatings deposited in the presence of saccharin in alkaline solution. The anodic and cathodic curves obtained from potentiodynamic polarization experiments were also in agreement with the EQCM results.