Novel fibrous composites based on electrospun PSF and PVDF ultrathin fibers reinforced with inorganic nanoparticles: Evaluation as oil spill sorbents

Oil spill accidents and oily wastewaters induce a negative impact to the environment and human health. Therefore, the developing of new sorbent materials to combat promptly such type of pollution is of great interest. In this work, poly(vinylidene fluoride) and polysulfone ultrathin fibers reinforced with Halloysite nanoclay and CoFe₂O₄ were developed via electrospinning method as composite sorbent materials. Fibrous composites were characterized by scanning and transmission electron microscopy. The magnetic property and the wetting behavior were ascertained by magnetometric and contact angle measurements, respectively. Results showed that the morphology of fibers was homogeneous, and the inorganic particles were properly dispersed within the polymeric matrix. Finally, sorbents were tested for sorption of oily liquids. Produced materials revealed the sorption capacities ranging from 3.70 to 10.01 g/g for poly(vinylidene fluoride)‐based composites, and from 15.69 to 28.21 g/g for polysulfone‐based composites, depending on the nature of tested oil.     

PAN-based activated carbon nanofiber/metal oxide composites for CO2 and CH4 adsorption: influence of metal oxide

In the present study, we successfully prepared two different electrospun polyacrylonitrile (PAN) based-activated carbon nanofiber (ACNF) composites by incorporation of well-distributed Fe₂O₃ and Co₃O₄ nanoparticles (NPs). The influence of metal oxide on the structural, morphological, and textural properties of final composites was thoroughly investigated. The results showed that the morphological and textural properties could be easily tuned by changing the metal oxide NPs. Even though, the ACNF composites were not chemically activated by any activation agent, they presented relatively high surface areas (S_BET) calculated by Brunauer–Emmett–Teller (BET) equation as 212.21 and 185.12 m²/g for ACNF/Fe₂O₃ and ACNF/Co₃O₄ composites, respectively. Furthermore, the ACNF composites were utilized as candidate adsorbents for CO₂ and CH₄ adsorption. The ACNF/Fe₂O₃ and ACNF/Co₃O₄ composites resulted the highest CO₂ adsorption capacities of 1.502 and 2.166 mmol/g at 0 °C, respectively, whereas the highest CH₄ adsorption capacities were obtained to be 0.516 and 0.661 mmol/g at 0 °C by ACNF/Fe₂O₃ and ACNF/Co₃O₄ composites, respectively. The isosteric heats calculated lower than 80 kJ/mol showed that the adsorption processes of CO₂ and CH₄ were mainly dominated by physical adsorption for both ACNF composites. Our findings indicated that ACNF-metal oxide composites are useful materials for designing of CO₂ and CH₄ adsorption systems.     

Sorption of inorganic salts on carbon nanomaterials and magnetite

Magnetic composites based on graphene oxides and functionalized carbon nanotubes containing magnetite nanoparticles are synthesized. The dispersing ability of these composites in water at different pH values is studied. It is shown that the solubility of Fe₃O₄ composites is constant in the рН range of 3.5–10, though these composites are unstable at both lower and higher pH values. Magnetic sorbents for extracting Се(NO₃)₃ and La(NO₃)₃ from solutions are tested. Dependences of the volume on the sorbent’s composition, pH value, and salt concentration in the solution are found. Maximum sorption capacity in relation to Се³⁺ and La³⁺ at рН 7.5 and 8.5 are found to be 1040 and 920 mg/g respectively.     

Facile synthesis of Fe3O4/reduced graphene oxide/polyvinyl pyrrolidone ternary composites and their enhanced microwave absorbing properties

In this paper, ternary nanocomposites of Fe₃O₄/reduced graphene oxide/polyvinyl pyrrolidone (Fe₃O₄/rGO/PVP) as a novel type of electromagnetic microwave absorbing materials were synthesized by a three-step chemical approach. First, Fe₃O₄ nanospheres were made by solvent thermal method. Successively, the Fe₃O₄ particles were assembled with rGO after having activated by para-aminobenzoic acid. PVP grafting and reduction of GO happened simultaneously in the third step. It is found that the electromagnetic absorption (EA) performance of synthesized ternary composites with suitable PVP amount had been significantly enhanced comparing to Fe₃O₄ and Fe₃O₄/rGO. Merely 15?wt% low loading in paraffin and thin as 2.8?mm can reach effective EA bandwidth (below ?10 Db) of 11.2?GHz, and the highest reflection loss reached ?67?dB at 10.7?GHz. It was demonstrated that these composites show an effective route to novel microwave absorbing material design.     

Surface hydrophobization of polyester fibers with poly(methylhydro-dimethyl)siloxane copolymers: Experimental design for testing of modified nonwoven materials as oil spill sorbents

This paper reports on the hydrophobization of polyester fibrous nonwoven with poly(methylhydro-dimethyl)siloxane copolymers in order to produce water-repellent sorbents for oil spill cleanup. Polysiloxane copolymers were first synthesized and characterized prior to be used as hydrophobization agents. The produced hydrophobic sorbents were characterized by scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDX); infrared spectra (FTIR) and water-contact angle measurements (WCA). Nonwoven sorbents were evaluated for oil sorption in pure oil bath and in the presence of water (W-test). A statistical experiment design was employed for materials testing and the development of data-driven models. The optimal hydrophobic nonwoven yielded maximal sorption capacities equal to 5.52 g/g and 10.03 g/g for dodecane and motor oil uptake, respectively. The mechanism of oil attachment on polymeric fibers was investigated by optical microscopy revealing a key role of inter-fiber voids for oil retention. Centrifugation tests demonstrated a high recycling ability of spent nonwoven sorbents.     

Fabrication,characterization and X-band microwave absorption properties of PAni/Fe3O4/PVA nanofiber composites materials

This work presents a study of microwave absorption properties of PAni/Fe₃O₄/PVA nanofiber composites with different ratio of Fe₃O₄ nanoparticles. The morphology of the composites nanofibers study by Field Emission Scanning Electron Microscopes (FESEM) and Transmission Electron Microscope (TEM) showed that the low content of Fe₃O₄ nanoparticles presence in the composites nanofibers indicates very much uniform surface, in the composites nanofiber without many bends, but some bends develop at higher content of Fe₃O₄ nanoparticles as indicated in the TEM image. Image-J software was used to further investigate the diameter of the composites nanofiber and found to be in the range of 152 to 195 nm. The nanofiber composites show excellent electric and magnetic properties and therefore vary with the addition of Fe₃O₄ nanoparticles in the composites nanofiber. In addition the PAni/Fe₃O₄/PVA composites nanofibers were further characterized by X-ray diffraction spectra (XRD) and Four Transformation infrared spectra (FTIR). The XRD pattern shows the presence of PAni nanotubes containing Fe₃O₄ nanoparticles by indicating peaks at 23.4⁰ and 35.43⁰ which was further supported by FTIR analysis. Microwave vector network analyzers (MVNA) were used to estimate the microwave absorption properties of the composites nanofibers. The absorption parameters was found to be −6.4 dB at 12.9 GHz within the range of X-band microwave absorption frequency, this reflection loss is attributed to the multiple absorption mechanisms as a result of the improved of impedance matching between dielectric and magnetic loss of the absorbent materials demonstrating that these materials can be used as protective material for electromagnetic radiation.     

Assessment of the sorption capacity and regeneration of carbon dioxide sorbents using thermogravimetric methods

Adsorption methods using solid sorbents are an alternative to the absorption technology in the processes of purification gases from carbon dioxide. There is a need to rapidly assess the suitability of sorbents for use it in PSA, TSA, or VPSA installations. Important parameters which determine the quality of the sorbent are the sorption capacity of sorbent, selectivity to CO₂ and the possibility of regeneration. This paper presents the results of sorption/desorption of CO₂ study on the impregnated porous materials using thermogravimetric methods. Thermogravimetry allows for rapid assessment of sorption capacity and regeneration of the sorbents. Specially selected temperature program allowed to determine the sorption capacity of sorbents depending on the concentration of CO₂ in the gas mixture and temperature. Degree of sorbent purification was determined in desorption process.     

Hybridization of Al2O3 microspheres and acrylic ester resins as a synergistic absorbent for selective oil and organic solvent absorption

In this study, we have focused on the synthesis, characterization, and oil absorption properties of Al₂O₃ microspheres/acrylic ester resin (AER) hybrids. The Al₂O₃ microspheres are prepared by a combined hydrothermal and sintering processes, followed by surface modification with silane coupling agent (KH 570). The Al₂O₃ microspheres/AER hybrids with a rough surface are synthesized by a microwave polymerization route by using modified Al₂O₃ microspheres as modifiers. In this hybrid materials system, the Al₂O₃ microspheres with porous structures may provide fast oil absorption due to the low oils absorption energy and short diffusion lengths. The resin hybrids exhibited reversible oils and organic solvents adsorption with maximum absorption capacities up to 29.85 g/g. This study suggests potential environmental advantage in using metal oxide microspheres in improving the oil absorption properties of oil‐absorbing resins as absorbents for recovering oil and organic solvent from water.     

零价铁/无定形磷酸钙复合物的合成及其对CdTe量子点吸附性能

在氮气保护下利用共沉淀方法成功地合成了零价铁无定形磷酸钙复合物（Fe⁰/ACP复合物）,并采用XRD、EDAX和FTIR对产物进行了表征。同时通过SEM和TEM分析可知所合成材料的粒径为300 nm左右。磁滞回线表明在磁场中可以将该复合物从非磁性材料中分离出来。氮气吸附脱附曲线表明所合成材料具有吸附性能。此外所合成Fe⁰/ACP复合物被用来吸附CdTe量子点,并采用二级动力学方程对吸附过程进行了分析。吸附产物采用XRD、FTIR、荧光和磁滞回线进行了表征,结果表明该吸附产物不仅具有磁性,而且具有很好的荧光性质。     

零价铁/无定形磷酸钙复合物的合成及其对CdTe量子点吸附性能

在氮气保护下利用共沉淀方法成功地合成了零价铁无定形磷酸钙复合物（Fe⁰/ACP复合物）,并采用XRD、EDAX和FTIR对产物进行了表征。同时通过SEM和TEM分析可知所合成材料的粒径为300 nm左右。磁滞回线表明在磁场中可以将该复合物从非磁性材料中分离出来。氮气吸附脱附曲线表明所合成材料具有吸附性能。此外所合成Fe⁰/ACP复合物被用来吸附CdTe量子点,并采用二级动力学方程对吸附过程进行了分析。吸附产物采用XRD、FTIR、荧光和磁滞回线进行了表征,结果表明该吸附产物不仅具有磁性,而且具有很好的荧光性质。     

Kinetic and thermodynamic sorption study of radiocobalt by magnetic hydroxyapatite nanoparticles

A novel composite adsorbent, magnetite/hydroxyapatite (Fe₃O₄/HAP) composites, was prepared by biowaste chicken eggshell for the purpose of removing radiocobalt from aqueous solutions. It highlighted that more than 92% Co(II) could be removed by using the developed composites under the experimental conditions. The maximum sorption capacity of Co(II) on Fe₃O₄/HAP composites was 6.9 × 10⁻⁴ mol/g. The coexisted foreign ions, e.g., ClO₄ ⁻, NO₃ ⁻, Cl⁻, Na⁺ and K⁺, did not interfere the elimination of Co(II) from aqueous solutions, while Mg²⁺ did. The sorption process was found to be controlled well by pseudo-second-order and intra-particle diffusion models, and the equilibrium data were simulated by Langmuir model very well with high correlation coefficients. The thermodynamic parameters confirmed the spontaneity and endothermic nature of Co(II) sorption processes. After sorption, the Fe₃O₄/HAP composites could be effectively and fleetly separated from aqueous solutions by magnetic separation technique in large scale. The Fe₃O₄/HAP composites are suitable materials in the preconcentration of Co(II) from large volumes of aqueous solutions.     

Bifunctional Reduced Graphene Oxide/V2O5 Composite Hydrogel: Fabrication,High Performance as Electromagnetic Wave Absorbent and Supercapacitor

Multifunctional graphene hydrogels have attracted great attention aimed at practical applications. Herein, the novel and bifunctional composite hydrogel containing reduced graphene‐oxide nanosheets (RGO) and V₂O₅ nanobelts (RGO/V₂O₅) is successfully prepared for the first time. Surprisingly, tridimensional (3D) RGO/V₂O₅ composite hydrogels cannot only be used as high‐performance electromagnetic (EM) wave absorbents; they also exhibit excellent properties suitable for supercapacitor electrodes. The composites exhibit a maximum absorption of up to ?21.5 dB. In particular, a composite hydrogel showed a bandwidth of 6.63 GHz, corresponding to a reflection loss at ?10 dB, which opens the possibility for the use of 3D graphene with other functional nanomaterials as lightweight and high‐performance EM wave absorption materials. Remarkably, the composite hydrogel is capable of delivering a high specific capacitance of about 320 F g^?1 at a current density of 1.0 A g^?1.     

Effective removal of ciprofloxacin from aqueous solutions using magnetic metal–organic framework sorbents: mechanisms,isotherms and kinetics

Metal–organic framework sorbents [MIL-100(Fe), MOF-235(Fe)], Fe₃O₄ nanoparticles and metal–organic framework loaded on iron oxide nanoparticles [Fe₃O₄@MIL-100(Fe) and Fe₃O₄@MOF-235(Fe)] were prepared and examined for ciprofloxacin (CIP) removal. The results showed that sorption kinetics of CIP by Fe₃O₄@MIL-100(Fe) follows the Elovich and pseudo-second-order models indicating that the sorption is both chemisorption and physical adsorption, whereas the sorption to other sorbents occurs mainly by physical sorption. The sorption isotherm studies revealed that Langmuir model provided the best fit to all the experimental data. The thermodynamic studies showed that CIP removal is spontaneous (ΔG° = 2.28 kJ/mol) and endothermic (ΔH° = 18.39 kJ/mol). It was also found that among the sorbents investigated for CIP removal, Fe₃O₄@MIL-100(Fe) has the highest maximum monolayer adsorption capacity of 322.58 mg/g.     

Preparation of carbon coated Fe3O4 nanoparticles and their application for solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

The carbon coated Fe₃O₄ nanoparticles (Fe₃O₄/C) were synthesized by a simple hydrothermal reaction and applied as solid-phase extraction (SPE) sorbents to extract trace polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. The Fe₃O₄/C sorbents possess high adsorption capacity and extraction efficiency due to strong adsorption ability of carbon materials and large surface area of nanoparticles, and only 50 mg of sorbents are required to extract PAHs from 1000 mL water samples. The adsorption attains equilibrium rapidly and analytes are eluted with acetonitrile readily. Salinity and solution pH have no obvious effect on the recoveries of PAHs, which avoids fussy adjustment to water sample before extraction. Under optimized conditions, the detection limits of PAHs are in the range of 0.2–0.6 ng L⁻¹. The accuracy of the method was evaluated by the recoveries of spiked samples. Good recoveries (76–110%) with low relative standard deviations from 0.8% to 9.7% are achieved. This new SPE method provides several advantages, such as high extraction efficiency, high breakthrough volumes, convenient extraction procedure, and short analysis times. To our knowledge, this is the first time that Fe₃O₄/C nanoparticles are used for the pretreatment of environmental water samples.     

Achieving full effective microwave absorption in X band by double-layered design of glass fiber epoxy composites containing MWCNTs and Fe3O4 NPs

The glass fiber epoxy composites containing MWCNTs and Fe₃O₄ NPs were manufactured by composites liquid molding process. The microwave absorbing properties of single-layered and double-layered glass fiber/MWCNTs/epoxy and glass fiber/Fe₃O₄ NPs/epoxy composites were evaluated. The reflection loss(RL) were calculated by the measured complex permittivity and permeability using waveguide method by vector network analyzer. Based on the mechanism analysis and deficiency of single-layer absorber, the double-layered composites were fabricated by using matching layer and absorbing layer to enhance the microwave absorption performance, which can be modulated by tailoring the electromagnetic parameters and thicknesses of each layer. The optimized microwave absorbing properties of double-layered composites with minimum RL of −45.7 dB and full X-band effective absorption can be achieved when the total thickness of the matching layer and absorbing layer is 1.8 mm, which can be attributed to synergistic effect of improved impedance matching characteristic and superior microwave attenuation characteristic of the absorbing layer. The combined utilization of dielectric loss and magnetic loss absorbent and their double-layered structure design shows great design flexibility and diversity and can be a promising candidate for designing high performance microwave absorbing materials.     

Synthesis and electrochemical characterizations of nano-crystalline LiFePO4 and Mg-doped LiFePO4 cathode materials for rechargeable lithium-ion batteries

Nano-crystalline LiFePO₄ and LiMg_0.05Fe_0.95PO₄ cathode materials were synthesized by sol–gel method in argon atmosphere using succinic acid as a chelating agent. Physico-chemical characterizations were done by thermogravimetric and differential thermal analysis, X-ray diffraction, scanning electron microscopy, transmittance electron microscopy, and Raman spectroscopy. Electrochemical behavior of the cathode materials were analyzed using cyclic voltammetry, and galvanostatic charge/discharge cycling studies were employed to characterize the reaction of lithium-ion insertion into and extraction from virginal and magnesium-doped LiFePO₄, in the voltage range 2.5 to 4.5 V (Vs Li/Li⁺) using 1 M LiPF₆ with 1:1 ratio of ethylene carbonate and dimethyl carbonate as electrolytes. LiMg_0.05Fe_0.95PO₄ exhibits initial charge and discharge capacities of 159 and 141 mAh/g at 0.2 C rate respectively, as compared to 121 and 107 mAh/g of pristine LiFePO₄. Furthermore, LiMg_0.05Fe_0.95PO₄ has retained more than 89% of the capacity even after 60 cycles. Hence, LiMg_0.05Fe_0.95PO₄ is a promising cathode material for rechargeable lithium-ion batteries.     

Template free solvothermal synthesis of single crystal magnetic Fe3O4 hollow spheres,their interaction with bovine serum albumin and antibacterial activities

Uniform sized single crystal magnetic Fe₃O₄ hollow spheres (MFHS) have been synthesized through simple solvothermal method using ferric chloride hexahydrate and 1,3-propanediamine. The reaction time and the amount of 1,3-propanediamine play major roles in the formation of magnetic Fe₃O₄ hollow spheres. The synthesized products are characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometry techniques. The crystalline Fe₃O₄ materials are composed of well-aligned hollow sphere magnetite nanoparticles and exhibit high saturation magnetization of 57.9?emu/g and a remnant magnetization of 17.6?emu/g at room temperature. MFHS interact strongly with bovine serum albumin (BSA) and brings out considerable conformational changes in BSA as evident from the UV–vis absorption, fluorescence and circular dichroism (CD) spectroscopic studies pertaining to the interaction of synthesized MFHS and BSA. The prepared MFHS effectively inhibit the growth of Pseudomonas aeruginosa and Staphylococcus aureus.     

Effects of alumina phases on CO2 sorption and regeneration properties of potassium-based alumina sorbents

A range of potassium-based alumina sorbents were fabricated by impregnation of alumina with K₂CO₃ to examine the effects of the structural and textural properties of alumina on the CO₂ sorption and regeneration properties. Alumina materials, which were used as supports, were prepared by calcining alumina at various temperatures (300, 600, 950, and 1,200 °C). The CO₂ sorption and regeneration properties of these sorbents were examined during multiple tests in a fixed-bed reactor in the presence of 1 vol% CO₂ and 9 vol% H₂O. The regeneration capacities of the potassium-based alumina sorbents increased with increasing calcination temperature of alumina. The formation of KHCO₃ increased with increasing calcination temperature during CO₂ sorption, whereas the formation of KAl(CO₃)(OH)₂, which is an inactive material, decreased. These results is due to the fact that the structure of alumina by the calcination temperature is related directly to the formation of the by-product [KAl(CO₃)(OH)₂]. The structure of alumina plays an important role in enhancing the regeneration capacity of the potassium-based alumina sorbent. Based on these results, a new potassium-based sorbent using δ-Al₂O₃ as a support was developed for post-combustion CO₂ capture. This sorbent maintained a high CO₂ capture capacity of 88 mg CO₂/g sorbent after two cycles. In particular, it showed a faster sorption rate than the other potassium-based alumina sorbents examined.     

Adsorption of asphaltene from crude oil by applying polythiophene coating on Fe3O4 nanoparticles

The objective of the present study was to investigate the potential use of applying polythiophene coating on magnetic Fe₃O₄ nanoparticles for the enhancement of asphaltene adsorption. Two stages of experimental were conducted. In the first stage, the ability of coated nanoparticles for asphaltene adsorption in synthetic asphaltene-toluene solution was evaluated. The effects of parameters such as nanoparticles concentration, initial concentration of asphaltene, and temperature were studied. In the second stage, the performance of the coated nanoparticles for the adsorption of asphaltene from crude oil was investigated under atmospheric pressure and a pressure-volume-temperature (PVT) apparatus was utilized for simulated reservoir conditions. Fe₃O₄ and Fe₃O₄-PT MNPs were synthesized using an effective co-precipitation method. The results of the first-stage tests indicated that the maximum adsorption capacity values for Fe₃O₄ and Fe₃O₄-PT MNPs were 0.79 and 1.09?mg?m^?2, respectively. The optimum value of nanoparticles concentration was approximately determined as 10?g?L^?1. According to the adsorption isotherms and kinetics, the Langmuir and pseudo-second-order Lagergren models were consistent with the experimental data, respectively. The average adsorption efficiencies for Fe₃O₄-PT and Fe₃O₄ MNPs were 78.98 and 65.94%, respectively. The results of the performed experiments on crude oil showed that Fe₃O₄-PT MNPs could adsorb asphaltenes from crude oil in a similar trend as synthetic asphaltene-toluene solution.     

Sorption of Carbon Dioxide from Wet Gases by K2CO3-in-Porous Matrix: Influence of the Matrix Nature

In a fixed-bed absorber at 40°C, the dynamics of carbon dioxide sorption over composite sorbents prepared by impregnation of potassium carbonate in various porous matrixes is studied. The dynamic capacity of the synthesized sorbents is shown to reach 0.12 g CO₂ per 1 g of the sorbent. The composite dynamic capacity depends on the nature of the host matrix and decreases in the sequence alumina > activated carbon > vermiculite > silica gel. For K₂CO₃-on-alumina, the sorption capacity decreases considerably after the first cycle of «absorption and regeneration under 200–350°C», whereas the sorbents based on active carbons could be reversibly restored. The findings are discussed within the idea on a chemical interaction between the host matrix and the impregnated salt.