离子液体中单电子转移活性自由基聚合法制备星形聚丙烯酰胺

以季戊四醇为原料,合成了2,2-二溴甲基-1,3-二溴丙烷(PEBr4),并以此为四官能度引发剂,Cu0粉/三-(2-二甲氨基乙基)胺(Me6-TREN)为催化体系,在离子液体中实现了丙烯酰胺(AM)的单电子转移活性自由基聚合(SET-LRP),得到了窄分子量分布的星形聚丙烯酰胺(PAM),Mw/Mn约为1.26(MGPCn=14.1×103,转化率为43.4%)。 采用1H NMR对PAM结构进行表征确认,并采用GPC测定了PAM的分子量及分子量分布;考察了水、单体/催化剂(引发剂)配比对聚合反应的影响。 结果表明,少量水的加入能够加快聚合反应,使链增长速率常数由kappp=0.042 4 h-1增加至kappp=0.148 6 h-1;催化剂、引发剂用量越大,AM的SET-LRP的聚合反应速率越快,聚合反应的可控性越好,Mn随催化剂用量的增大及引发剂用量的减小而增大,且与理论分子量相近,分子量分布均呈下降趋势。     

苯乙烯的单电子转移活性自由基聚合

以2,2-二溴甲基-1,3-二溴丙烷（PEBr4）为引发剂,Cu0粉/三（2-二甲氨基乙基）胺（Me6-TREN）为催化体系,在二甲亚砜（DMSO）和H2O的混合溶剂中实现了苯乙烯（St）的单电子转移活性自由基聚合（SET-LRP）。 通过1H NMR和GPC分析表明,所得聚合物为星形结构并具有较窄的分子量分布Mw/Mn=1.20（MGPCn=25.3×103,转化率为42.6%）,且聚合物的链端保留了-Br端基。 考察了溶剂、反应温度及相转移催化剂对聚合的影响,结果表明,混合溶剂中H2O的体积分数由10%增加至20%导致了聚合速率的降低,表观聚合速率常数（kappp）由0.026 4 h-1减小至0.019 7 h-1;升高反应温度、增加催化剂用量以及相转移催化剂的加入分别导致聚合体系的kappp增加,同时,催化剂用量的增加和相转移催化剂的加入使聚合物的分子量分布系数降低。     

甲基咪唑乙酸盐介质中CuBr催化的MMA活性聚合

以甲基咪唑乙酸盐为聚合介质、α-溴代异丁酸乙酯/溴化亚铜为引发体系,研究了甲基丙烯酸甲酯(MMA)的原子转移自由基聚合(ATRP).结果表明:MMA的聚合具有活性自由基聚合的特征.聚合体系中的引发剂和催化剂CuBr比例分别为0.33:1、1:1和1:3时,聚合体系具有活性可控的特征,所得的PMMA分子量分布较窄Mw/Mn＜1.26,体系的引发效率随着引发剂浓度的增加而降低.     

丙烯酰胺在离子液体中的原子转移自由基聚合

在1-丁基-3-甲基咪唑四氟硼酸盐离子液体中以氯化苄为引发剂,氯化亚铜/2,2′-联吡啶为催化剂实现了丙烯酰胺的原子转移自由基聚合(ATRP)。用IR对聚合物的结构进行了表征,证实聚合物链端具有—Cl端基。考察了引发剂用量、催化剂和配体用量、单体用量和反应时间等因素对丙烯酰胺在离子液体中的原子转移自由基聚合的影响。结果表明,反应时间为1.5h时转化率达到31.43%,MnGPC=4451,Mw/Mn=1.38。且80℃下丙烯酰胺在离子液体中的最佳聚合工艺条件为:单体浓度3mol/L,引发剂浓度0.010mol/L,催化剂浓度0.015mol/L,反应时间1h。     

碱性离子液体催化金属调节的甲基丙烯酸甲酯的电子转移活化原子转移自由基聚合

通过电子转移活化原子转移自由基聚合(AGET ATRP),以2-溴代异丁酸乙酯(EBiB)为引发剂、维生素C(VC)为还原剂。以碱性离子液体1-丁基-3-甲基咪唑氢氧化盐([Bmim][OH])分别和FeCl3·6H2O、CuCl2及RuCl3形成的配合物为催化剂催化甲基丙烯酸甲酯(MMA)的本体和溶液聚合。催化量的[Bmim][OH]即可提高聚合速率,并且得到相对分子质量分布可控的PMMA(Mw/Mn为1.20~1.40)。研究了[Bmim][OH]的加入量对聚合速率和相对分子质量分布的影响,3种催化体系催化性质通过循环伏安曲线表征。扩链反应证明了碱性离子液体催化甲基丙烯酸甲酯的聚合为"活性"/可控自由基聚合。碱性离子液体良好的溶解性使其成为活性自由基聚合的良好催化剂。     

SET-LRP法制备星型疏水缔合水溶性聚合物

采用丙烯酰胺(AM)、2-丙烯酰胺基-2-甲基丙磺酸钠(NaAMPS)以及N-叔丁基丙烯酰胺(NtBA)为共聚单体,以Cu~0粉/三(2-二甲氨基乙基)胺(Me_6-TREN)为催化体系,四氯化碳(CCl_4)为引发剂,利用单电子转移自由基聚合(SET-LRP)方法合成星型疏水缔合水溶性聚合物P(AM/NtBA/NaAMPS)。采用控制变量法分别考察了引发温度、疏水单体含量、AMPS含量、引发剂用量、催化剂铜、单体浓度等因素对聚合物相对分子质量的影响,确定了最佳聚合条件并考察了聚合物的耐温抗盐性能。结果表明,当单体浓度为35%,引发温度为25℃,AM、AMPS、NtBA分别占单体总量的93.6%、5%、1.4%(摩尔比),引发剂质量分数为0.4942%,催化剂铜的质量分数为0.0848%,钝化剂的质量分数为0.1192%时,所得星型疏水缔合水溶性聚合物P(AM/NtBA/NaAMPS)的相对分子质量出现最高值为267万,同时具有一定的耐温抗盐性,其溶液性能与线型化的P(AM/NtBA/NaAMPS)相似,且在相同浓度下CaCl_2对聚合物表观粘度的影响比NaCl大。     

原位生成三苄氧基钇催化ε-己内酯可控开环聚合

以烷基钇[Y( CH2 SiMe3),(THF)2]与苯甲醇原位反应生成的三苄氧基钇为引发剂,研究ε-己内酯(CL)可控开环聚合反应(ROP).结果表明,随着聚合体系中单体/引发剂摩尔比的增大,产物聚己内酯(PCL)的数均分子量(1H NMR计算和GPC测定)均随之线性增加,且分子量分布(Mw/Mn=1.4～1.1)逐...     

丙烯酰胺在聚乙二醇水溶液中聚合产品的微观形态

采用偶氮类水溶性引发剂2,2′-偶氮二异丙基咪唑啉二盐酸盐(VA044)引发丙烯酰胺(AM)在聚乙二醇(PEG)水溶液中的双水相聚合;研究了引发剂、单体、聚乙二醇浓度及温度对最终产品中聚丙烯酰胺(PAM)液滴形态、尺寸的影响.随着引发剂浓度的增加,液滴由球状变为细长条状;随着温度的上升,球状液滴逐渐趋于条状,然后又重新趋于球状;在初始单体浓度较低时,PAM液滴滴径分布较窄,当其浓度增加后,滴径呈多峰分布;随着PEG浓度的增加,聚合物液滴趋于球状。     

吡啶类试剂调节H_2O/TiCl_4引发苯乙烯正离子聚合研究

1988年,Kennedy等[1~3]首先实现了由BCl3共引发的苯乙烯(St)及其衍生物活性正离子聚合,但所得到聚合产物的分子量分布宽(Mw/Mn=5~6).苯乙烯活性正离子聚合的共引发剂由BCl3扩展到SnCl4、TiCl4[4~7]和TiCl3(OiPr).对于TiCl4共引发的St活性正离子聚合,所用引发剂为2,4,4-三甲基-2     

具有窄分子量分布和羧基末端的聚甲基丙烯酸甲酯和聚苯乙烯的合成

以CuCl/TMEDA为催化剂、氯乙酸为引发剂利用原子转移自由基聚合方法在本体或溶液体系中合成了具有窄分子量分布和末段羧基的聚甲基丙烯酸甲酯和聚苯乙烯。在两种单体的本体或溶液聚合体系中,单体和氯乙酸的配料比增加,有利于聚合反应速度的加快;本体中进行的甲基丙烯酸甲酯和苯乙烯聚合反应速率比相应的溶液聚合体系快,但是得到的最终产物的分子量分布指数Mw/Mn较宽;溶液聚合方法的使用,使聚合反应速度缓和,得到的聚合产物聚甲基丙烯酸甲酯和聚苯乙烯的Mw/Mn介于1.17-1.21和1.16-1.19之间,具有理想的窄分子量分布;动力学实验表明,聚合反应以ATRP的聚合机理进行,体现出活性/可控聚合的特征;聚合产物聚甲基丙烯酸甲酯和聚苯乙烯及其末段端基由~1HNMR表征。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.