Visible-light-driven heterostructure Ag/Bi2WO6 nanocomposites synthesized by photodeposition method and used for photodegradation of rhodamine B dye

Visible-light-driven heterostructure Ag/Bi₂WO₆ nanocomposites were prepared by transforming Ag⁺ ions into metallic Ag⁰ nanoparticles loaded on top of Bi₂WO₆ nanoplates under visible light irradiation for 1 h. XRD, XPS, SEM and TEM analyses indicated that spherical metallic Ag nanoparticles were uniformly dispersed on top of orthorhombic Bi₂WO₆ thin nanoplates. Rhodamine B (RhB) was used as a dye model for investigation of photocatalytic performance of Bi₂WO₆ nanoplates with different weight contents of Ag nanoparticles illuminated by visible radiation. In this research, 10% Ag/Bi₂WO₆ nanocomposites have the highest photocatalytic activity in the degradation of RhB at 94.21% within 210 min because of the rapid diffusion of electronic charge through the Schottky barrier between metallic Ag nanoparticles and Bi₂WO₆ thin nanoplates, good electrical conductivity of metallic Ag nanoparticles, inhibited recombination of charge carriers and enhanced photocatalytic activity of Ag/Bi₂WO₆ nanocomposites. Main active species of the photocatalysis and stability of the photocatalyst were also evaluated.

     

CeO2/Bi2WO6 Heterostructured Microsphere with Excellent Visible‐light‐driven Photocatalytic Performance for Degradation of Tetracycline Hydrochloride

CeO₂/Bi₂WO₆ heterostructured microsphere with excellent and stable photocatalytic activity for degradation tetracyclines was successfully synthesized via a facile solvothermal route. The photocatalytic experiments indicated that CeO₂/Bi₂WO₆ heterostructured microspheres exhibited enhanced photocatalytic activity compared to pure Bi₂WO₆ in both the degradation of tetracycline hydrochloride (TCH) and rhodamine B (RhB) under visible‐light irradiation. The 1CeO₂/2Bi₂WO₆ exhibited the best photocatalytic activity for degradation of TCH, reaching 91% after 60 min reaction. The results suggested that the particular morphological conformation of the microspheres resulted in smaller size and more uniform morphology so as to increase the specific surface area. Meanwhile, the heterojunction was formed by coupling CeO₂ and Bi₂WO₆ in the as‐prepared microspheres, so that the separation efficiency of photogenerated electrons and holes was dramatically improved and the lifetimes of charge carriers were prolonged. Hence, introduction of CeO₂ could significantly enhance the photocatalytic activity of CeO₂/Bi₂WO₆ heterostructured microspheres and facilitate the degradation of TCH. This work provided not only a principle method to synthesize CeO₂/Bi₂WO₆ with the excellent photocatalytic performance for actual produce, but also a excellent property of the photocatalyst for potential application in photocatalytic treatment of tetracyclines wastewater from pharmaceutical factory.     

Preparation and visible light photocatalytic activity of Bi2O3/Bi2WO6 heterojunction photocatalysts

The Bi₂O₃/Bi₂WO₆ heterojunction photocatalysts were prepared by a two-step solvothermal process using Bi(NO₃)₃-ethylene glycol solution as Bi source. The catalysts were characterized by X-ray diffraction, scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflection spectroscopy. The heterostructure catalysts are composed of Bi₂O₃ nanoparticles as modifier and 3D Bi₂WO₆ microspheres as substrate. Bi₂O₃ nanoparticles with diameters of about 10-15 nm are tightly grown on the lateral surface of the Bi₂WO₆ microspheres. The hierarchical Bi₂O₃/Bi₂WO₆ microspheres exhibit higher photocatalytic activity than the single phase Bi₂WO₆ or Bi₂O₃ for the degradation of rhodamine B under visible light illumination (λ>420 nm). The enhancement of the photocatalytic activity of the Bi₂O₃/Bi₂WO₆ heterojunction catalysts can be ascribed to their improved light absorption property and the reduced recombination of the photoexcited electrons and holes during the photocatalytic reaction. The effect of loading amount of Bi₂O₃ on the catalytic performance of the heterojunction catalysts was also investigated and the optimal content of Bi₂O₃ is 3 wt%. The Bi₂O₃/Bi₂WO₆ heterojunction photocatalysts are essentially stable during the photocatalytic process.     

Ag/Bi2WO6复合材料的制备及光催化性能

采用一步水热合成法制得花球状Bi_2WO_6和Ag/Bi_2WO_6光催化剂,借助X射线衍射(XRD)、场发射扫描电子显微镜(FES-EM)、透射电子显微镜(TEM)、X射线光电子能谱分析(XPS)、紫外-可见分光光度法(UV-Vis)等手段对样品进行结构性能表征。模拟日光的条件下,以甲基橙(MO)为降解物,对Bi_2WO_6和Ag/Bi_2WO_6的催化活性和机理进行研究。结果表明,相对Bi_2WO_6,相同条件下Ag/Bi_2WO_6对MO具有更佳的降解效果,当Ag掺杂量为1%(n/n)时,其降解率(180 min)可达到91.4%,同时一次回收样降解率也达到81%。此外,也对Ag/Bi_2WO_6复合材料的降解机理做了初步探究。     

Method for Visible Light‐Induced Photocatalytic Degradation of Methylparaben in Water Using Nanostructured Ag/AgBr@m‐WO3

An efficient method of photocatalytic degradation of methylparaben in water using Ag nanoparticles (NPs) loaded AgBr‐mesoporous‐WO₃ composite photocatalyst (Ag/AgBr@m‐WO₃), under visible light is presented. In this process, quantification of methylparaben in water was carried out by high‐performance liquid chromatography (HPLC) and the HPLC results showed a significant reduction of methylparaben in water due to the enhanced of photocatalytic degradation efficiency of Ag/AgBr@m‐WO₃. For the material synthesis, highly ordered mesoporous‐WO₃ (m‐WO₃) was initially synthesized by sol–gel method and AgBr nanoparticles (NPs) were subsequently introduced in the pores of m‐WO₃, and finally, the Ag nanoparticles were introduced by light irradiation. The enhanced photocatalytic degradation of methylparaben in water is attributed to the formation of surface plasmonic resonance (SPR) due to the introduction of Ag NPs on the surface of the catalyst. Also, the formation of heterojunction between AgBr and mesoporous‐WO₃ in Ag/AgBr@m‐WO₃ significantly inhibited the recombination of light‐induced electron‐hole pairs in the semiconductor composite. The morphological and optical characterizations of the synthesized photocatalysts (Ag/AgBr@m‐WO₃) were carried out using SEM, TEM, XDR, N₂ adsorption–desorption, UV‐VIS diffuse reflectance spectroscopy (DRS). Also, the photocatalytic studies using radical scavengers were carried out and the results indicated that ${\text{O}}_2^{·-}$ is the main reactive species.     

The effects of solvent on photocatalytic properties of Bi2WO6/TiO2 heterojunction under visible light irradiation

Bi₂WO₆/TiO₂ heterojunction photocatalysts with two different microstructures were controllably fabricated via a facile two-step synthetic route. XRD, XPS, SEM, TEM, BET-surface, DRS, PL spectra, photoelectrochemical measurement (Mott-Schottky), and zeta-potential analyzer were employed to clarify structural and morphological characteristics of the obtained products. The results showed that Bi₂WO₆ nanoparticles/nanosheets grew on the primary TiO₂ nanorods. The TiO₂ nanorods used as a synthetic template inhibit the growth of Bi₂WO₆ crystals along the c-axis, resulting in Bi₂WO₆/TiO₂ heterostructure with one-dimensional (1D) morphology. The photocatalytic properties of Bi₂WO₆/TiO₂ heterojunction photocatalysts were strongly dependent on their shapes and structures. Compared with bare Bi₂WO₆ and TiO₂, Bi₂WO₆/TiO₂ composite have stronger adsorption ability and better visible light photocatalytic activities towards organic dyes. The Bi₂WO₆/TiO₂ composite prepared in EG solvent with optimal Bi:Ti ratio of 2:12 (S-TB2) showed the highest photocatalytic activity, which could totally decompose Rhodamine B within 10 min upon irradiation with visible light (λ > 422 nm), and retained the high photocatalytic performance after five recycles, confirming its stability and practical usability. The results of PL indicated that Bi₂WO₆ and TiO₂ could combine well to form a heterojunction structure which facilitated electron–hole separation, and lead to the increasing photocatalytic activity.     

稀土离子Tm3+掺杂Bi2WO6的可见光催化性能

以Na₂WO₄·2H₂O和Bi（NO₃）₃·5H₂O为主要原料,采用水热法合成了稀土离子Tm³⁺掺杂的Bi₂WO₆光催化剂。采用XRD、SEM、TEM、Raman、PL、DRS研究了Tm³⁺掺杂Bi₂WO₆的物相,微观形貌和可见光催化性能。结果表明,Tm³⁺掺杂有效提高了Bi₂WO₆的光催化性能,当掺杂量为6%时,样品的光催化性能最好,可见光照射30 min后,对罗丹明B的降解效率达到91.27%,而可见光照射5 h后,对焦糖色素的降解效率达45.25%。与未掺杂Bi₂WO₆相比,分别提高了27.78%和35.22%。     

Visible-light-driven photocatalyst of Bi2WO6 nanoparticles prepared via amorphous complex precursor and photocatalytic properties

The visible-light-driven photocatalyst Bi₂WO₆ nanoparticles have been prepared by calcining amorphous complex precursor at a relatively low temperature of above 450 ^oC. The effects of calcination temperature and time on the structures and properties of Bi₂WO₆ nanoparticles have been investigated in detail. The photocatalytic activity of the Bi₂WO₆ powders were evaluated by degradation of RhB molecules in water under visible light irradiation (λ>400 nm). The results showed that the particle size and grain size of Bi₂WO₆ increased with the calcination temperature and time. The photocatalytic activity of the best sample was about 8.8 times higher than that of the sample prepared by traditional solid state reaction and the photo-degradations was a zero-order reaction. The best route to enhance the photocatalytic activity of Bi₂WO₆ was to prepare the sample at a lower temperature for a longer time, due to the samples with better crystallization and smaller particle size.     

Water-triggered conversion of Cs4PbBr6@TiO2 into Cs4PbBr6/CsPbBr3@TiO2 three-phase heterojunction for enhanced visible-light-driven photocatalytic degradation of organic pollutants

Poor stability and light absorption are the main factors hindering the application of Cs₄PbBr₆ nanocrystals (NCs) in photocatalysis, and acquiring heterostructure of semiconductor/perovskite still is a challenging task. Here, we successfully synthesized Cs₄PbBr₆ NCs and then coated with titania (TiO₂) to construct Cs₄PbBr₆/CsPbBr₃@TiO₂ ternary heterojunction by one-pot water-triggered conversion. The newly formed interface phase of CsPbBr₃ between Cs₄PbBr₆ NCs and TiO₂ enhanced visible-light absorption capacity of composites, promoting the effective separation and transfer of photoelectron–hole pairs. CsPbBr₃ interfacial phase levels in Cs₄PbBr₆/CsPbBr₃@TiO₂ can be regulated by controlling water content, and its content can affect the photocatalytic performance of the obtained composites. Ternary Cs₄PbBr₆/CsPbBr₃@TiO₂ composite exhibits highest photocatalytic activity for degradation of Rhodamine B and tetracycline in water system under visible-light irradiation, which is higher than that of CsPbBr₃@TiO₂ and commercial P25, respectively. Meanwhile, the obtained composite shows good stability in the water system. This work demonstrates a critical interface modulation action of CsPbBr₃ for the application of Cs₄PbBr₆ NCs in the fields of photocatalysis.     

Fe~(3+)掺杂三维分级纳米Bi_2WO_6的合成及其光催化活性增强机理(英文)

利用水热法合成了Fe3+掺杂的三维分级纳米Bi2WO6,借助X射线衍射(XRD)、场发射扫描电镜(FE-SEM)、透射电镜(HRTEM)、能谱(EDS)、紫外可见漫反射(UV-Vis-DRS)等测试手段对所得样品的相组成、形貌和谱学特征进行了表征。选择罗丹明B为模型污染物研究所得样品在可见光下的催化活性。结果表明,Fe3+掺杂Bi2WO6为新颖的分级纳米结构,且Fe3+掺杂能有效提高Bi2WO6的光催化活性,Fe3+掺杂量对Bi2WO6活性的影响显著;实验结果还表明,所得Fe3+掺杂Bi2WO6催化剂的稳定性较好,易于回收。此外,还对Fe3+掺杂Bi2WO6的光催化活性增强机理进行了研究,缺电子的Fe3+作为电子捕获中心有利于促进光生电子-空穴对的分离,从而提高Bi2WO6的光催化活性。     

Fe3+掺杂三维分级纳米Bi2WO6的合成及其光催化活性增强机理

利用水热法合成了Fe³⁺掺杂的三维分级纳米Bi₂WO₆,借助X射线衍射（XRD）、场发射扫描电镜（FE-SEM）、透射电镜（HRTEM）、能谱（EDS）、紫外可见漫反射（UV-Vis-DRS）等测试手段对所得样品的相组成、形貌和谱学特征进行了表征。选择罗丹明B为模型污染物研究所得样品在可见光下的催化活性。结果表明,Fe³⁺掺杂Bi₂WO₆为新颖的分级纳米结构,且Fe³⁺掺杂能有效提高Bi₂WO₆的光催化活性,Fe³⁺掺杂量对Bi₂WO₆活性的影响显著;实验结果还表明,所得Fe³⁺掺杂Bi₂WO₆催化剂的稳定性较好,易于回收。此外,还对Fe³⁺掺杂Bi₂WO₆的光催化活性增强机理进行了研究,缺电子的Fe³⁺作为电子捕获中心有利于促进光生电子-空穴对的分离,从而提高Bi₂WO₆的光催化活性。     

稀土离子Tm3+掺杂Bi2WO6的可见光催化性能

以Na_2WO_4·2H_2O和Bi(NO_3)_3·5H_2O为主要原料,采用水热法合成了稀土离子Tm~(3+)掺杂的Bi_2WO_6光催化剂。采用XRD、SEM、TEM、Raman、PL、DRS研究了Tm~(3+)掺杂Bi_2WO_6的物相,微观形貌和可见光催化性能。结果表明,Tm~(3+)掺杂有效提高了Bi_2WO_6的光催化性能,当掺杂量为6%时,样品的光催化性能最好,可见光照射30 min后,对罗丹明B的降解效率达到91.27%,而可见光照射5 h后,对焦糖色素的降解效率达45.25%。与未掺杂Bi_2WO_6相比,分别提高了27.78%和35.22%。     

Fabrication of an efficient ternary TiO2/Bi2WO6 nanocomposite supported on g-C3N4 with enhanced visible-light- photocatalytic activity: Modeling and systematic optimization procedure

In this study, a ternary TiO₂/g-C₃N₄/Bi₂WO₆ nanocomposite was prepared via a facial approach. The final structure was applied as a new photocatalyst for the removal of brilliant green (BG) dye, as a model of organic pollutants, from the aqueous solution. The results of FESEM, EDS with mapping, XRD, FTIR, UV–vis DRS, PL, and EIS analyses further demonstrate the successful establishment of heterojunction between TiO_2, g-C₃N₄, and Bi₂WO₆. Integration of g-C₃N₄ and Bi₂WO₆ with TiO2 was remarkably decreased the band gap energy of TiO₂ to 2.68 eV (from 3.15 eV). The effects of various experimental factors such as TiO₂/g-C₃N₄/Bi₂WO₆ dosage, initial BG concentration, visible irradiation time, and pH on the photocatalyst behavior of TiO₂/g-C₃N₄/Bi₂WO₆ were investigated by 2 ^k-1 factorial design. The results of the analysis of variance demonstrate these experimental factors are effective on the BG degradation efficiency. The response surface methodology was applied to achieve the optimization procedure of BG degradation. According to these results, the complete BG removal efficiency was obtained for the optimal conditions of 15.76 mg of TiO₂/g-C₃N₄/Bi₂WO₆ nanocomposite, an initial BG concentration of 10 ppm, pH of 9, and time duration of 70 min. The improved photocatalytic performance of ternary TiO₂/g-C₃N₄/Bi₂WO₆ nanocomposite was related to the formation of heterojunction between TiO_2, g-C₃N₄, and Bi₂WO₆, significant light adsorption ability, and low recombination of photogenerated carriers.     

Construction of a novel ZnCo2O4/Bi2O3 heterojunction photocatalyst with enhanced visible light photocatalytic activity

A novel ZnCo₂O₄/Bi₂O₃ heterojunction photocatalyst was prepared via balling method. The enhanced photocatalytic activity is mainly attributed to the broad photoabsorption and low recombination rate of photogenerated electron-hole pairs, which is driven by the photogenerated potential difference formed at the ZnCo₂O₄/Bi₂O₃ heterojunction interface.     

Hydrothermal preparation and visible-light photocatalytic activity of Bi2WO6 powders

Bi₂WO₆ powder photocatalyst was prepared using Bi(NO₃)₃ and Na₂WO₄ as raw materials by a simple hydrothermal method at 150 °C for 24 h, and then calcined at 300, 400, 500, 600 and 700 °C for 2 h, respectively. The as-prepared samples were characterized with UV-visible diffuse reflectance spectra, fourier transform infrared spectra (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and N₂ adsorption-desorption measurement. The photocatalytic activity of the samples was evaluated using the photocatalytic oxidation of formaldehyde at room temperature under visible light irradiation. It was found that post-treatment temperature obviously influenced the visible-light photocatalytic activity and physical properties of Bi₂WO₆ powders. At 500 °C, Bi₂WO₆ powder photocatalyst showed the highest visible-light photocatalytic activity due to the samples with good crystallization and high BET surface area.     

BiOI/Bi2WO6对甲基橙和苯酚的光催化降解及光催化机理

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi₂WO₆光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-VisDRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi₂WO₆催化剂的光催化性能。结果表明：与商业P₂₅和纯Bi₂WO₆相比,13.2%BiOI/Bi₂WO₆光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi₂WO₆和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi₂WO₆的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,OH,h⁺,O₂和H₂O₂,特别是h⁺,共同支配了甲基橙和苯酚的光催化降解过程。     

One-step hydrothermal synthesis of hierarchical Ag/Bi2WO6 composites: In situ growth monitoring and photocatalytic activity studies

Hierarchical Ag/Bi₂WO₆ nanomaterials were prepared by a facile one-step hydrothermal method in mixed acetic acid and ethylene glycol (EG) medium. EG is employed as mild reducing agent for the formation of metallic Ag from Ag⁺ precursors. In situ energy dispersive X-ray diffraction (EDXRD) monitoring showed that the hydrothermal formation kinetics of Bi₂WO₆ in the presence of EG was significantly slowed down due to its very high viscosity. The photocatalytic activities of Ag/Bi₂WO₆ composites were evaluated by the photodegradation of methylene blue (MB) under visible light irradiation. The photocatalytic activity of Bi₂WO₆ is strongly influenced by the Ag loading. The enhanced catalytic activity of the composites is based on the cooperative effects of plasmon absorption band and separation of photogenerated electron-hole pairs.     

Flower-like Bi2WO6/ZnO composite with excellent photocatalytic capability under visible light irradiation

The photocatalytic ability of ZnO is improved through the addition of flower-like Bi₂WO₆ to prepare a Bi₂WO₆/ZnO composite with visible light activity. The composite is characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy with UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy and N₂ adsorption-desorption isotherms. After modification, the band gap energy of Bi₂WO₆/ZnO is reduced from 3.2 eV for ZnO to 2.6 eV. Under visible light irradiation, the Bi₂WO₆/ZnO composite shows an excellent photocatalytic activity for degrading methylene blue (MB) and tetracycline. The photo-degradation efficiencies of (0.3:1) Bi₂WO₆/ZnO for MB and tetracycline are approximately 246 and 4500 times higher than those of bare ZnO, respectively, and correspondingly, the photo-degradation rates for the two pollutants are approximately 120 and 200 times higher than those with bare ZnO, respectively. Moreover, the photocatalyst of (0.3:1) Bi₂WO₆/ZnO exhibits a higher transient photocurrent density of approximately 4.5 μA compared with those of bare Bi₂WO₆ and ZnO nanoparticles. The successful recombination of Bi₂WO₆ and ZnO enhances the photocatalytic activity and reduces the band gap energy of ZnO, which can be attributed to the effective separation of electron–hole pairs. Active species trapping experiments display that [O₂]^? is the major species involved during photocatalysis rather than ?OH and h⁺. This study provides insight into designing a meaningful visible-light-driven photocatalyst for environmental remediation.     

煅烧温度对花朵状钨酸铋光催化活性的影响

钨酸铋在水相体系中能光催化降解有机污染物,而对于钨酸铋光催化活性影响因素的研究非常少.本文研究了煅烧温度对花朵状钨酸铋光催化活性的影响.以钨酸钠和硝酸铋为原料,在160°C下水热反应20 h,合成催化剂,并经不同温度煅烧3 h.用X射线衍射(XRD)、拉曼(Raman)光谱、紫外-可见漫反射吸收光谱(UVVis DRS)和荧光(PL)光谱表征样品.结果表明,这些样品具有十分相似的相组成和电子结构.然而,对于水中苯酚的降解,钨酸铋的光催化活性显示出了很大的差异.钨酸铋的光催化活性随着煅烧温度的升高,先上升后下降,最优煅烧温度为350°C,并且不受样品比表面积大小的影响.这些样品的活性差异主要归结于钨酸铋的结晶度、吸光性和表面缺陷对其光生载流子分离效率的综合影响.     

三维花状Bi2WO6/BiOBr异质结的制备及对多种染料的降解性能

利用水热法以十二烷基二甲基溴化铵(DDAB)和十六烷基三甲基溴化铵(CTAB)为结构导向剂以及溴源,成功地制备了三维花状Bi₂WO₆/BiOBr异质结。通过X射线粉末衍射、扫描电镜、透射电镜、紫外可见漫反射光谱、光电流、Nyquist曲线和电子顺磁共振分别对样品的结构、形貌、组成和光电化学性能进行了表征。结果表明,20~30 nm的BiOBr纳米粒子均匀地附着在Bi₂WO₆薄片上形成三维花状结构。Bi₂WO₆/BiOBr与纯Bi₂WO₆相比,扩展了可见光的响应范围,且提高了催化剂光生电子与空穴的分离效率。光降解实验表明w_DDAB/w_CTAB=2.6时Bi₂WO₆/BiOBr的光催化性能最优。在300 W氙灯(波长>420 nm)可见光照射下,其在降解罗丹明B中表现出最高的反应速率常数(0.0997 min^-1),分别约为Bi₂WO₆(0.0376 min^-1)和BT?4(0.0523 min^-1,w_DDAB/w_CTAB=3.9)的2.7倍和1.9倍,且6个循环后活性依然没有明显衰减。Bi₂WO₆/BiOBr异质结还可以无选择性地降解其他类型的有机染料,如亚甲基蓝、孔雀石绿和甲基橙。最后,基于活性物种捕获实验和Mulliken原子电负性理论计算结果,提出了Bi₂WO₆/BiOBr异质结的光降解机理。