WO3基气敏材料研究进展

综述了近年来国内外对WO3基气敏材料的研究状况,对制备工艺、防团聚技术、掺杂效应及气敏机理等进行了分析比较,并对今后的研究方向提出了一些看法。     

表面气氛处理对气敏元件特性的影响

选择适当气体对气敏元件进行处理是气敏元件表面修饰的重要方法，本文利用ＳＯ２对Ｈ２Ｓ气敏元件进行了不同条件的处理，使得气敏元件的灵敏度和选择性得到了明显的改善。     

Fe2O3—SnO2复合气敏材料的气敏性能研究

本文采用共沉淀方法制备超微粒子原料粉,测试了不同配比材料的气敏灵敏度,并探讨了不同粒度的Fe_2O_3原料与气敏特性之间的关系,提出Fe_2O_3-SnO_2复合气敏材料的气敏机制属体控制与表面控制兼有的混合机制·Fe_2O_3-SnO_2,复合气敏材料,选用CuO掺杂,可制出对乙炔具有高选择性和灵敏度的气敏元件。     

α-Fe2O3气敏材料制备及掺杂效应近期发展

本文综合介绍了α－Ｆｅ２Ｏ３气敏材料近年来在制备方法（含影响因素）、防团聚技术、掺杂效应（含气敏机理）上的研究新进展，提出了今后气敏传感器研究及改进方向。     

二维光学薄膜的气敏反射光谱特性

研究二维光学薄膜ＳｎＯ２：ＴｉＯ２在乙醇、丙酮、氨蒸汽中的气敏反射光谱，发现它与厚膜（膜厚２０μｍ）的气敏反射光谱有明显的差异，它的反射光强在气体浓度较低时随气体浓度增加而增强，气体浓度较高时则现象相反，并且它的反射峰会发生位移。利用不同气体的反射峰的气敏特性，可制成有气体选择性的气敏光纤传感器。     

导电聚合物传感器的研究进展

综述了导电聚合材料应用于生物敏、离子敏、气敏、湿敏传感器的研究概况。并对导电聚合物传感器研究动向作了展望。     

稀土掺杂γ—Fe2O3气敏材料研究

采用化学共沉淀法合成了具有良好气敏特性的γ—Fe_2O_3微粉。通过稀土掺杂使γ—Fe_2O_3的显微结构得到改善,相转变温度得到提高,进而改善了γ-Fe_2O_3气敏材料的稳定性,提高了气体检测灵敏度。另外,不同稀土元素的掺杂使γ—Fe_2O_3气敏材料的气敏选择性得到改善。     

高灵敏度高选择性气敏材料——金属酞菁配合物

酞菁配合物是一类重要的光电功能材料.由于它的特殊结构使其成为高灵敏度高选择性气敏材料,具有极好的应用前景.本文在介绍酞菁配合物的结构特点、合成方法、气敏特性及其最新研究进展的基础上,讨论了酞菁配合物的气敏机理及膜结构、中心金属和取代基对气敏性的影响,并对酞菁配合物作为气敏材料的发展趋势进行了展望。     

萘酞菁类配合物的气敏特性

在阐述了萘酞菁配合物的结构特点和气敏机理的基础上，讨论了影响萘酞菁配合物气敏性的主要因素，介绍了近年来萘酞菁配合物气敏物特性研究的最新进展，并对萘酞菁配合物作为气敏材料的发展趋势进行了展望。     

SnO_2/ZnO及ZnO/SnO_2双层膜的气敏性质

采用动态脉冲法研究了ＳｎＯ２／ＺｎＯ及ＺｎＯ／ＳｎＯ２ 双层膜的气敏性质。结果表明：选择合适的膜厚及膜厚比,可获得灵敏度及选择性良好的气敏元件。讨论了一些影响双层膜气敏性质的因素,结合元素的扩散,初步解释了膜厚与灵敏度的关系。     

气敏新材料MXenes在呼出气体传感器中的应用

电子鼻结合人工智能对呼出气进行检测、分析和识别已成为非侵入性医疗检测领域的研究热点。然而,目前已报道的气体传感材料尚不能同时满足高灵敏度、高选择性和稳定的室温检测,阻碍了气体传感器在医疗健康领域的应用及发展,寻找合适的传感材料具有重要的意义和挑战。新型二维层状纳米材料MXenes具有种类多、比表面积大、导电性能强、表面含有丰富的官能团以及能带宽度可调等优异性能,是高灵敏、低能耗气体传感器的明星候选材料。本综述针对MXenes基材料的特殊结构,总结梳理了MXenes基材料在气体传感中的最新研究成果,聚焦于MXenes材料的气体传感机理和改性方法,对MXenes材料用于气体传感依然存在的问题和挑战进行深入探讨。     

Porous sol gel silica films doped with crystalline NiO nanoparticles for gas sensing applications

A reliable sol gel route to synthesize NiO doped SiO₂ films with different NiO content is here described. The films showed detectable and reversible changes in both optical and electrical properties when exposed to some reducing/oxidizing gaseous species at temperatures in the 250°C–350°C range. A functional characterization protocol has been designed and some of the sensing properties of the materials have been investigated for detecting NO₂, CH₄, CO and H₂. An optical transmittance increase up to 2% has been detected for 1% CO in dry air atmospheres, while relative resistance response (R _R = R _gas/R _air) values up to 4.97 for 850 ppm H₂/air mixtures have been registered for conductometric gas sensing. Films at all NiO molar concentrations in the 10% NiO - 40% range showed an optical response to the target gas, while only 30% and 40% NiO films provided a detectable gas induced resistance change.     

半导体复合氧化物气敏材料研究进展

综述了近几年半导体复合氧化物的发展，包括分类、气敏机理、制备方法等，对其发展趋势提出了一些看法。引用文献33篇。     

石墨烯掺杂纳米氧化锌用于检测三乙胺的增强气敏性能

通过简单研磨实现固相反应的方法制备了纳米氧化锌材料,并利用石墨烯掺杂对氧化锌进行改性,研究了氧化锌材料的气敏性能。利用X射线衍射仪(XRD)、扫描电镜(SEM)、红外光谱仪(IR)对合成的样品进行了结构和形貌表征,考察了原料比例和石墨烯掺杂量对氧化锌形貌和气敏性能的影响。结果表明:合成的氧化锌均为纳米颗粒,随着柠檬酸量增加,得到许多有气孔的氧化锌;石墨烯掺杂后,均得到纳米颗粒的氧化锌;气体检测表明,石墨烯掺杂后的氧化锌,其最佳工作温度由400℃降为280℃,对三乙胺表现出较高的选择性;掺杂3%石墨烯的氧化锌对浓度为0.1 mmol/L三乙胺的响应值(S=Ra/Rg)达到18,是掺杂前的4倍。石墨烯掺杂纳米ZnO可作为检测三乙胺气体的新型传感材料。     

Morphology‐Dependent Gas‐Sensing Properties of ZnO Nanostructures for Chlorophenol

The crystal‐plane effect of ZnO nanostructures on the toxic 2‐chlorophenol gas‐sensing properties was examined. Three kinds of single‐crystalline ZnO nanostructures including nanoawls, nanorods, and nanodisks were synthesized by using different capping agents via simple hydrothermal routes. Different crystal surfaces were expected for these ZnO nanostructures. The sensing tests results showed that ZnO nanodisks exhibited the greatest sensitivity for the detection of toxic 2‐chlorophenol. The results revealed that the sensitivity of these ZnO samples was heavily dependent on their exposed surfaces. The polar (0001) planes were most reactive and could be considered as the critical factor for the gas‐sensing performance. In addition, calculations using density functional theory were employed to simulate the gas‐sensing reaction involving surface reconstruction and charge transfer both of which result in the change of electronic conductance of ZnO.     

Template Based Synthesis of Porous Graphdiyne Nanosheet for Reversible and Fast NO2 Detection by UV Irradiation

Two-dimensional graphdiyne (GDY) formed by sp and sp² hybridized carbon has been found to be an efficient toxic gas sensing material by density functional theory (DFT). However, little experimental research concerning its gas sensing capability has been reported owing to the complex preparation process and harsh experimental conditions. Herein, porous GDY nanosheets are successfully synthesized through a facile solvothermal synthesis technique by using CuO microspheres (MSs) as both template and source of catalyst. The porous GDY nanosheets exhibit a broadband optical absorption, rendering it suitable for the light-driven optoelectronic gas sensing applications. The GDY-based gas sensor was demonstrated to have excellent reversible to NO₂ behaviors at 25 °C for the first time. More importantly, higher response value and faster response-recovery time once exposed to NO₂ gas molecules are achieved by the illumination of UV light. In this way, our work paves the way for the exploration of GDY-based gas detection experimentally.     

Fast ethylamine gas sensing based on intermolecular charge-transfer complexation

We have investigated the fast ethylamine gas sensing of 2-chloro-3,5-dinitrobenzotrifluoride(CDBF) loaded poly(acrylonitrile) nanofiber based on an intermolecular charge-transfer complexation.Reversible response and recovery were achieved using alternating gas exposure.This system shows a fast ethylamine gas sensing within 0.4 s.     

基于半导体纳米SnO_2构建的气敏传感器的应用研究进展

SnO2是传统的气敏材料,由于其具有间隙锡离子和氧空位的特性,使得气体更容易吸附在材料表面,从而显示出更好的气敏性质.通过把SnO2进行贵金属附载掺杂和多种气敏性半导体氧化物的复合,探讨了一系列性能良好的气敏传感器,阐述了SnO2气敏传感的最新进展.     

掺银SnOx薄膜的催化作用

掺银ＳｎＯ_ｘ薄膜的催化作用张勇，周坤粦，曹伟民（中国科学院成都有机化学研究所成都６１００４１）关键词气敏薄膜，表面掺杂，催化ＳｎＯ２是重要的气敏传感材料，采用纳米技术，可使元件微型化、集成化，并可提高灵敏度。本文以等离子体增强化学气相沉积法制得超微?..