纳米半导体光催化甲醇水溶液制乙二醇

采用主客体结构的纳米ＺｎＳ通过光催化法从甲醇水溶液选择性的合成了乙二醇（ＥＧ）。考察了杂质成分和体系的稳定性，研究了光源、催化剂的温度处理、反应时间、溶液ｐＨ和主体分子因素对ＥＧ选择性的影响。     

固相微萃取中高分子涂层的研究

聚甲基乙烯基硅氧烷首次被用作固相微萃取（ＳＰＭＥ）装置的固相涂层,通过顶空固相微萃取气相色谱分析（ＨＳ－ＳＰＭＥ－ＧＣ）对使用聚甲基乙烯基硅氧烷固相涂层的ＳＰＭＥ装置进行了评价。对其使用厚度、温度及选择性进行了较深入的研究,找到了它的最佳使用条件和适用范围,并与商品化的ＳＰＭＥ涂层作了比较。对ＨＳ－ＳＰＭＥ－ＧＣ和ＨＳ－ＧＣ两种方法也作了比较,指出两者的适用范围不同。     

聚乙二醇改性聚乳酸的研究

将丙交酯（ＤＬ ＬＡ）与聚乙二醇（ＰＥＧ）共聚得到了一系列高分子量的共聚物．用ＩＲ、１Ｈ ＮＭＲ和ＤＭＡ对它的结构和粘弹性进行了表征，并测定了其力学性能，同时对材料在加工过程中特征粘度的变化也进行了研究．结果表明，ＰＥＧ与ＬＡ的共聚物是一种三嵌段结构ＨＯ ＰＬＡ ＰＥＧ ＰＬＡ ＯＨ．当ＰＥＧ含量增加时，强度下降，伸长率增加，共聚物逐渐由脆性向韧性转变，因此用ＰＥＧ改性的ＰＬＡ是一种综合性能可调控的生物降解材料     

气相色谱保留指数通用数据库的研究（二）PEG 20M柱间保留指数的相互关系

针对极性柱间保留指数的可比性差这一特点，选择了以常用的ＰＥＧ２０Ｍ为代表，根据气－液色谱保留的一般模型，并考虑柱间选择性作用的微小差异及气－液相界面面积ＡＧＬ大小不等，建立了柱间保留的相互关系方程。对６１个不同结构类型的化合物在１００℃和７５℃柱温下６根ＰＥＧ２０Ｍ石英毛细管柱上的应用表明，结果准确，关联后计算得到的保留指数与实际测定值间的绝对平均偏差为１ｉ．ｕ．，从而为极性柱上保留指数通用数据库的建立提供了方法。     

Uniconazole—P的合成

对氯苯甲醛与α－三唑基频哪酮在ＫＦ／Ａｌ２Ｏ３／ＰＥＧ４０００存在下经Ｋｎｏｅｖｅｎａｇｅｌ反应得８５％烯基三唑酮（Ⅱ）（Ｅ／Ｚ＝０．６５），Ⅱ经光异构化得９２％Ｅ－Ⅱ（Ｅ／Ｚ≥９９／１）；Ｅ－Ⅱ在手性相转移催化剂的存在下进行选择性不对称还原得９２％Ｕｎｉｃｏｎａｚｏｌｅ－Ｐ（Ⅰ），ｅｅ＝３０％，Ｅ／Ｚ≥９９／１．Ⅰ是高效的植物生长延缓剂．     

气相色谱保留指数通用数据库的研究（二）PEG 20M柱间保留指数的相互关系

 针对极性柱间保留指数的可比性差这一特点，选择了以常用的ＰＥＧ２０Ｍ为代表，根据气－液色谱保留的一般模型，并考虑柱间选择性作用的微小差异及气－液相界面面积ＡＧＬ大小不等，建立了柱间保留的相互关系方程。对６１个不同结构类型的化合物在１００℃和７５℃柱温下６根ＰＥＧ２０Ｍ石英毛细管柱上的应用表明，结果准确，关联后计算得到的保留指数与实际测定值间的绝对平均偏差为１ｉ．ｕ．，从而为极性柱上保留指数通用数据库的建立提供了方法。     

Fe2O2/SiO2对异辛醇氧化生成异辛酸反应的催化性能研究

采用浸渍法制备了系列的Ｆｅ２Ｏ３／ＳｉＯ２催化剂,并用ＸＲＤ,ＢＥＴ,ＴＧＤＴＧ和ＳＥＭ等手段对催化剂进行了表征;考察了不同Ｆｅ负载量和焙烧温度的Ｆｅ２Ｏ３／ＳｉＯ２催化剂对异辛醇氧化生成异辛酸反应的催化活性的影响,确定了最佳催化剂制备条件．结果表明,Ｆｅ负载量为４％,焙烧温度为５００℃时,催化剂活性组分Ｆｅ２Ｏ３的在载体上分散均匀,晶粒大小基本一致,催化剂比表面积较大,催化剂活性达到最佳,异辛酸选择性最高可达５５．１４％,收率可达２２．４１％．     

Pt／H—Ga—Si杂原子分子筛催化剂上丙烷芳构化

考察了在具有Ｐｅｎｔａｓｉｌ孔道结构的Ｈ－Ｇａ－Ｓｉ杂原子分子筛及ＨＺＳＭ－５分子筛催化剂上的丙烷芳构化，Ｐｔ／Ｈ－Ｇａ－Ｓｉ有较高催化活性和芳烃选择性。用ＸＲＤ、ＴＥＭ和ＴＰＲ等于译催化剂进行了表征，讨论了Ｐｔ与Ｇａ的相互作用。Ｐｔ／Ｈ－Ｇａ－Ｓｉ为双工能催化剂，Ｐｔ促进烷烃脱氢成为烯烃，还能降低丙烷裂解活性，而且可稳定骨架Ｇａｗ，使其不易脱除；Ｇａ要以提高中间烯烃转变为芳烃的选择性。     

RING ENLARGEMENT OF N-HETEROCYCLES

ＲＩＮＧＥＮＬＡＲＧＥＭＥＮＴＯＦＮ－ＨＥＴＥＲＯＣＹＣＬＥＳ￥ＪｉａｎＷｅｉＺＨＡＮＧ；ＪｉＹｕＧＵＯ；ＸｉａｏＴｉａｎＬＩＡＮＧ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｅｒｉａＭｅｄｉｃａ．ＣｈｉｎｅｓｅＡｃａｄｅｍｙｏｆＭｅｄｉｃａｌＳｃｉｅｎｃｅｓ．ａ...     

用气相色谱—原子发射光谱联用技术分析石油及其产品

１引言气相色谱－原子发射光谱法（ＧＣ－ＡＥＤ）提供了一种灵敏度高、选择性好的方法，它能够进行多元素多通道分析．其原理是将色谱分离出的分子流出色谱柱后进入等离子体腔，等离子体（氦等离子体）具有很高的电离温度（５００～６０００Ｋ），它能够使分子裂解成原子并被激发，当激发态回到基态时产生元素的特征谱线。它既能够分析石油的主要成分－烃类，也能够分析痕量含杂原子的有机化合物．ＧＣ－ＡＥＤ技术自１９８９年由美国惠普公司商业化后，在许多领域中得到广泛的应用。但是，ＧＣ－ＡＥＤ在石油地质方面的应用在近几年才开始…     

Synthesis and characterizations of poly(ethylene oxide) methyl ether grafted on the expanded graphite with isocyanate groups

Introducing isocyanate (NCO) groups onto the surface of expanded graphite (EG) was achieved by treatment of the EG with excess toluene-2,4-diisocyanate in dimethyl sulfoxide (DMSO). The reaction of NCO group on the EG with the hydroxyl group in the poly(ethylene oxide) methyl ether (MPEO) to yield MPEO-grafted EG was carried out for modifying the surface properties of graphite. The influence factors, such as reaction time, temperature and the ratio of the reactants, on the grafting reaction and grafting ratio were investigated.     

Kinetic analysis of the transesterification of dimethyl terephthalate with ethylene glycol in a semibatch reactor

The kinetic analysis of the transesterification of ethylene glycol (EG) and dimethyl terephthalate (DMT) was studied in a semibatch reactor under nonisothermal conditions. The effect of the temperature profile, EG/DMT ratio, and catalyst concentration on the reaction rate was studied. Models were fitted by using an algorithm of parameter estimation in differential equations based on the Gauss–Newton method improved with the Marquardt extension. It was found that, unlike previous authors, the reaction rate was not a classical third order reaction of first order with respect to EG, DMT, and catalyst concentration, but the EG reaction order was 0.6 and a hyperbolic function was found to fit the relationship between reaction rate and catalyst concentration. Also, it was found that, at high conversions, the effect of the reverse reaction should not be neglected.     

Influence of Reaction Pressure on Semibatch Esterification Process of Poly(ethylene terephthalate) Synthesis

Summary: Influence of esterification pressure on oligomeric properties was studied by using a semibatch reactor. Esterification model for semibatch process was further improved by considering EG reflux in the column. It was observed that increasing the reaction pressure decreases EG/water ratio in the column while increasing the EG/TPA feed ratio increases EG/water ratio in the column. By controlling the EG reflux in a semibatch reactor, it is possible to generate oligomers with similar oligomeric properties observed at different stages of continuous process.     

Ethylene glycol: properties, synthesis, and applications

Ethylene glycol (EG) is an important organic compound and chemical intermediate used in a large number of industrial processes (e.g. energy, plastics, automobiles, and chemicals). Indeed, owing to its unique properties and versatile commercial applications, a variety of chemical systems (e.g., catalytic and non-catalytic) have been explored for the synthesis of EG, particularly via reaction processes derived from fossil fuels (e.g., petroleum, natural gas, and coal) and biomass-based resources. This critical review describes a broad spectrum of properties of EG and significant advances in the prevalent synthesis and applications of EG, with emphases on the catalytic reactivity and reaction mechanisms of the main synthetic methodologies and applied strategies. We also provide an overview regarding the challenges and opportunities for future research associated with EG.     

微波法合成乙二醇插层镍铝层状双金属氢氧化物

乙二醇(EG)插层层状双金属氢氧化物(LDH)可作为层间催化反应器,用于原油中环烷酸与EG的酯化脱酸反应,但其合成过程需要较长时间。 以硝酸根型镍铝LDH为前体,在KOH促进下,采用微波辅助的离子交换法合成EG插层LDH,省时节能,提高效率。 考察了微波时间、微波温度和微波功率对EG插层LDH结构的影响。 并用XRD、FT-IR和TG-DSC等比较了微波法和常规方法合成的EG插层LDH的性质。 结果表明,微波辐射能提供高能量,促进待交换阴离子向层间的扩散,并减弱层板与层间原有阴离子间的作用力,在微波温度为120 ℃,微波时间为10 min和微波功率550 W的条件下,即可得到结晶度高的EG插层LDH。 微波法合成的EG插层LDH与常规方法合成的具有相似的性质和更高的结晶度,而合成时间可由12 h大幅缩短至10 min。     

乙二醇在铂电极上吸附和氧化过程的现场FTIR反射光谱研究(Ⅰ)──酸性介质

运用循环伏安法和现场FTIR反射光谱研究了酸性介质中乙二醇在铂电极上的吸附和氧化行为,指出乙二醇电催化氧化是通过解离吸附产物和反应中间体双途径机理进行的。经FTIR反射光谱检测,解离吸附产物为CO,反应中间体主要有CH₂OH─COOH和HOOC─COOH等。本文还在分子水平上解释了铂电极上乙二醇吸附和氧化循环伏安特征的内在原因。     

Dechlorination of poly(vinylidene chloride) in NaOH/ethylene glycol as a function of NaOH concentration, temperature, and solvent

The wet dechlorination treatment of poly(vinylidene chloride) (PVDC) was evaluated at atmospheric pressure in a solution of NaOH in ethylene glycol (EG), as a function of NaOH concentration, temperature, and solvent. Hydroxide ion from NaOH was required for dechlorination with EG acting solely as a solvent. The wet treatment exhibited significantly enhanced dechlorination efficiency over traditional thermal techniques, with a reaction efficiency as high as 92.8% in 1.0 M NaOH at 190 °C. Dechlorination reactions of PVDC in both NaOH/EG and NaOH/H₂O were expressed by an apparent first-order reaction. At 190 °C, the apparent rate constant in 1.0 M NaOH/EG was approximately 1.4 times larger than in 1.0 M NaOH/H₂O, with an apparent activation energy of 82.8 kJ mol⁻¹, indicating that the reaction proceeded under chemical control. The degree of dechlorination increased with increasing reaction temperature, favouring the elimination of HCl over the hydroxyl substitution of chloride.     

乙二醇醇解松木屑反应特征及机理分析

利用酸化的乙二醇作溶剂对松木屑进行醇解,探讨了温度和时间对醇解转化率的影响。利用热重分析、红外光谱分析、扫描电镜及X射线衍射考察了醇解残渣的性质。分别利用傅里叶变换红外光谱及色质联用分析了正己烷不溶物和可溶物中组分的分布及特征。结果表明,松木屑转化率在90 min、160℃达到最大值95.3%。松木屑中纤维素无定形区的组分和木质素发生了解离,醇解残渣的表面结构被破坏;正己烷不溶物是含有羟基、甲氧基及醚键等含氧官能团的化合物;正己烷可溶物主要由苯二甲酸酯、硬脂酸甲酯、2-甲基己酸丙酯、2-甲基丙酸、聚乙二醇及未反应的乙二醇组成。乙二醇与松木屑解离的羧酸发生酯化反应,对液相产物具有稳定作用,促进了松木屑的醇解反应;醇解过程中乙二醇自缩聚生成聚乙二醇,增大了乙二醇的消耗。     

Formation of Pt-Ru nanoparticles in ethylene glycol solution: an in situ X-ray absorption spectroscopy study

The chemical state and formation mechanism of Pt-Ru nanoparticles (NPs) synthesized by using ethylene glycol (EG) as a reducing agent and their stability have been examined by in situ X-ray absorption spectroscopy (XAS) at the Pt LIII and Ru K edges. It appears that the reduction of Pt(IV) and Ru(III) precursor salts by EG is not a straightforward reaction but involves different intermediate steps. The pH control of the reaction mixture containing Pt(IV) and Ru(III) precursor salts in EG to 11 led to the reduction of Pt(IV) to Pt(II) corresponding to [PtCl4](2-) whereas Ru(III)Cl3 is changed to the [Ru(OH)6](3-) species. Refluxing the mixture containing [PtCl4](2-) and [Ru(OH)6](3-) species at 160 degrees C for 0.5 h produces Pt-Ru NPs as indicated by the presence of Pt and Ru in the first coordination shell of the respective metals. No change in XAS structural parameters is found when the reaction time is further increased, indicating that the Pt-Ru NPs formed are extremely stable and less prone to aggregation. XAS structural parameters suggest a Pt-rich core and a Ru-rich shell structure for the final Pt-Ru NPs. Due to the inherent advantages of the EG reduction method, the atomic distribution and alloying extent of Pt and Ru in the Pt-Ru NPs synthesized by the EG method are higher than those of the Pt-Ru/C NPs synthesized by a modified Watanabe method.     

介质阻挡放电甲醇脱氢偶联一步合成乙二醇反应中氢气的催化作用

利用原位发射光谱表征和在线色谱分析,研究了甲醇介质阻挡放电脱氢偶联一步合成乙二醇反应中氢气的催化作用,考察了放电频率、甲醇和氢气进料量以及反应压力的影响.结果表明,在介质阻挡放电产生的非平衡等离子体中,H2不但能显著提高甲醇转化率,而且能显著提高乙二醇的选择性.在300°C,0.1 MPa,反应器注入功率为11 W,放电频率为12.0 k Hz,甲醇气体进料量为11.1 m L/min,氢气进料量为80–180 m L/min的条件下,甲醇转化率接近30%,乙二醇选择性大于75%.乙二醇收率与激发态氢原子的Hα谱线强度之间存在同增同减关系.由此推测,氢原子是起催化作用的活性氢物种.活性氢物种的生成途径是:基态氢分子通过与电子碰撞变成激发态,激发态氢分子通过第一激发态氢自动解离为基态氢原子.放电反应条件通过影响氢分子解离来影响氢气的催化作用.氢气在非平衡等离子体中显示的催化作用有可能为开辟新的化学合成途径提供重要机遇.