Nitrile ligands activation in dinuclear aminocarbyne complexes

The diiron complexes [Fe(Cp)(CO){μ-η²:η²-C[N(Me)(R)]NC(C₆H₃R′)CCH(Tol)}Fe(Cp)(CO)] (R = Xyl, R′ = H, 3a; R = Xyl, R′ = Br, 3b; R = Xyl, R′ = OMe, 3c; R = Xyl, R′ = CO₂Me, 3d; R = Xyl, R′ = CF₃, 3e; R = Me, R′ = H, 3f; R = Me, R′ = CF₃, 3g) are obtained in good yields from the reaction of [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(p-NCC₆H₄R′)(Cp)₂]⁺ (R = Xyl, R′ = H, 2a; R = Xyl, R′ = Br, 2b; R = Xyl, R′ = OMe, 2c; R = Xyl, R′ = CO₂Me, 2d; R = Xyl, R′ = CF₃, 2e; R = Me, R′ = H, 2f; R = Me, R′ = CF₃, 2g) with TolCCLi. The formation of 3 involves addition of the acetylide at the coordinated nitrile and C-N coupling with the bridging aminocarbyne together with orthometallation of the p-substituted aromatic ring and breaking of the Fe-Fe bond. Complexes 3a-e which contain the N(Me)(Xyl) group exist in solution as mixtures of the E-trans and Z-trans isomers, whereas the compounds 3f,g, which posses an exocyclic NMe₂ group, exist only in the Z-cis form. The crystal structures of Z-trans-3b, E-trans-3c, Z-trans-3e and Z-cis-3g have been determined by X-ray diffraction experiments.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Facile synthesis of achiral and chiral PCN pincer palladium(II) complexes and their application in the Suzuki and copper-free Sonogashira cross-coupling reactions

Five non-symmetrical PCN pincer palladium(II) complexes [PdCl{C₆H₃-2-(CHNR)-6-()}] (R = m-ClC₆H₄, R′ = Ph (2a); R = Ph, R′ = Ph (2b); R = i-Pr, R′ = Ph (2c); R = m-ClC₆H₄, R′ = i-Pr (2d); R = (S)-1-phenylethyl, R′ = Ph (2e)) have been easily prepared in only two steps from readily available m-hydroxybenzaldehyde and characterized by HRMS, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectra. The molecular structures of 2a and 2b have been further determined by X-ray single-crystal diffraction. The obtained Pd complexes were found to be effective catalysts for the Suzuki and copper-free Sonogashira cross-coupling reactions which could be carried out in the undried solvent under air.     

Self-assembly syntheses and crystal structures of triorganotin(IV) pyridinecarboxylate: 1D polymers and a 42-membered macrocycle

A series of new triorganotin(IV) pyridinecarboxylates with 6-hydroxynicotinic acid (6-OH-3-nicH), 5-hydroxynicotinic acid (5-OH-3-nicH) and 2-hydroxyisonicotinic acid (2-OH-4-isonicH) of the types: [R₃Sn (6-OH-3-nic)·L]_n (I) (R = Ph, L = Ph·EtOH, 1; R = Bn, L = H₂O·EtOH, 2; R = Me, L = 0, 3; R = n-Bu, L = 0, 4), [R₃Sn (5-OH-3-nic)]_n (II) (R = Ph, 5; R = Bn, 6; R = Me, 7; R = n-Bu, 8), [R₃Sn (2-OH-4-isonic·L)]_n (III) (R = Bn, 9, L = MeOH; R = Me, L = 0, 10; R = Ph, 11, L = 0.5EtOH) have been synthesized. All the complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy analyses. Among them, except for complexes 5 and 6, all complexes were also characterized by X-ray crystallography diffraction analysis. Crystal structures show that complexes 1-10 adopt 1D infinite chain structures which are generated by the bidentate O, O or N, O and the five-coordinated tin centers. Significant O-H?O, and N-H?O intermolecular hydrogen bonds stabilize these structures. Complex 11 is a 42-membered macrocycle containing six tin atoms, and forms a 2D network by intermolecular N-H?O hydrogen.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Allylpalladium (II) complexes with dichalcogenoimidodiphosphinate ligands: Synthesis, structure, spectroscopy and their transformation into palladium chalcogenides

The synthesis, characterization and thermal behavior of new monomeric allylpalladium (II) complexes with dichalcogenoamidodiphosphinate anions are reported. The complexes [R = H, R′ = Prⁱ, E = S (1a); R = H, R′ = Prⁱ, E = Se (1b); R = H, R′ = Ph, E = S (1c); R = H, R′ = Ph, E = Se (1d); R = Me, R′ = Prⁱ, E = S (2a); R = Me, R′ = Prⁱ, E = Se (2b); R = Me, R′ = Ph, E = S (2c); R = Me, R′ = Ph, E = Se (2d)] have been prepared by room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)] (acac = acetylacetonate) with dichalcogenoimidodiphosphinic acids in acetonitrile solution. The complexes have been characterized by multinuclear NMR (¹H, ¹³C{¹H}, ³¹P{¹H}, ⁷⁷Se{¹H}), FT-IR and elemental analyses. The crystal structures of complexes 1a, 1d and 2d have been reported and they consist of a six-membered PdE₂P₂N ring (E = S for 1a and Se for 1d and 2d) and an allyl group, C₃H₄R(R = H for 1a and 1d and Me for 2d). Thermogravimetric studies have been carried out for few representative complexes. The complexes thermally decompose in argon atmosphere to leave a residue of palladium chalcogenides, which have been characterized by PXRD, SEM and EDS.     

New alkenyl-substituted group 4 C-ansa-metallocene complexes. Reactivity of the substituent at the carbon ansa bridge

The allyl-substituted group 4 metal complexes [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti, R = CH₂CHCH₂, (2); R = CH₂C(CH₃)CH₂ (3); M = Zr, R = CH₂CHCH₂ (4), R = CH₂C(CH₃)CH₂ (5)] have been synthesized by the reaction of allyl ansa-magnesocene derivatives and the tetrachloride salts of the corresponding transition metal. The dialkyl complexes ] [M = Ti, R = CH₂=CHCH₂, R′ = Me (6), R′ = CH₂Ph (7); R = CH₂C(CH₃)CH₂, R′ = Me (8), R′ = CH₂Ph (9); M = Zr, R = CH₂CHCH₂, R′ = Me (10), R′ = CH₂Ph (11); R = CH₂C(CH₃)CH₂, R′ = Me (12), R′ = CH₂Ph (13)] have been synthesized by the reaction of the corresponding ansa-metallocene dichloride complexes 2-5 and two molar equivalents of the alkyl Grignard reagent. Compounds 2-5 reacted with H₂ under catalytic conditions (Wilkinson’s catalyst or Pd/C) to give the hydrogenation products [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = CH₂CH₂CH₃ (14) or R = CH₂CH(CH₃)₂ (15); M = Zr and R = CH₂CH₂CH₃ (16) or R = CH₂CH(CH₃)₂ (17)]. The reactivity of 2-5 has also been tested in hydroboration and hydrosilylation reactions. The hydroboration reactions of 3, 4 and 5 with 9-borabicyclo[3.3.1]nonane (9-BBN) yielded the complexes [M{(9-BBN)CH₂CH(R)CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (18); M = Zr and R = H (19) or R = CH₃ (20)]. The reaction with the silane reagents HSiMe₂Cl gave the corresponding [M{ClMe₂SiCH₂CHRCH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (21); M = Zr and R = H (22) or R = CH₃ (23)]. The reaction of 22 with t-BuMe₂SiOH produced a new complex [Zr{t-BuMe₂SiOSi(Me₂)CH₂CH₂CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (24) through the formation of Si-O-Si bonds. On the other hand, reactivity studies of some zirconocene complexes were carried out, with the insertion reaction of phenyl isocyanate (PhNCO) into the zirconium-carbon σ-bond of [Zr{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}₂Me₂] (25) giving [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr{Me{κ²-O,N-OC(Me)NPh}] as a mixture of two isomers 26a-b. The reaction of [Zr{(n-Bu)(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}(CH₂Ph)₂] (27) with CO also provided a mixture of two isomers [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr(CH₂Ph){κ²-O,C-COCH₂Ph}] 28a-b. The molecular structures of 4, 11, 16 and 17 have been determined by single-crystal X-ray diffraction studies.     

Bimetallic nickel complexes of macrocyclic tetraiminodiphenols and their ethylene polymerization

Schiff’s base condensation of 2,6-diformyl-4-R-phenol and affords 34-membered macrocyclic tetraiminodiphenol compounds, (R = H and R′ = iPr, 1; R = Me and R′ = iPr, 2; R = F and R′ = iPr, 3; R = Me and R′ = Et, 4; R = F and R′ = Et, 5) in good yields (47-62%), from which dinuclear nickel complexes, (R = H and R′ =  iPr, 6; R = Me and R′ = iPr, 7; R = F and R′ = iPr, 8) are prepared. Molecular structures of 2, dipotassium salt of 1, and 7 were confirmed by X-ray crystallography. Addition of B(C₆F₅)₃ to a toluene solution of 6-8 gives insoluble precipitates which show good activity for ethylene polymerization.     

Synthesis, characterization and electrochemical behavior of unsymmetric transition metal-terminated biphenyl ethynyl thiols

The synthesis of the biphenyl alkynyl thiols and thioesters R′-CC-C₆H₄-C₆H₄-SR (3: R′ = SiMe₃, R = C(O)Me; 4: R′ = SiMe₃, R = H; 5: R′ = H, R = C(O)Me) from I-C₆H₄-C₆H₄-SC(O)Me (1) is described. Molecules 1 and 5 have been used as starting materials in the synthesis of mono- and heterobimetallic transition metal complexes of type L_nM′-CC-C₆H₄-C₆H₄-SR (7: L_nM′ = Fc, R = C(O)Me; 8: L_nM′ = Fc, R = H; 10: L_nM′ = (Ph₃P)Au, R = C(O)Me; 14: L_nM′ = FcPPh₂-Au, R = C(O)Me; Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe; FcPPh₂ = (η⁵-C₅H₅)(η⁵-C₅H₄PPh₂)Fe). While complex 7is accessible by the Sonogashira cross-coupling of Fc-CCH (6) with 1, molecules 10 and 14 can be prepared by treatment of the thioester 5 with (Ph₃P)AuCl (9) and FcPPh₂-AuCl (13), respectively.The molecular solid state structures of 3, 7, 10 and 13-15 have been determined by single crystal X-ray crystallographic analysis. Typical features of these species are their linear M-CC-C₆H₄-C₆H₄-SR structure and the lack of coplanarity of the biphenyl arene rings. The overall length of these complexes are 13.345(2) Å for 3 (molecule A), 15.146(3) Å for 7, 15.705(2) Å for 10 (molecule A) and 15.649(4) Å for 14. The thioester groups are pointing away from the ferrocene building block. In 7 a linear 1D chain is set-up by π-interactions between two independent molecules of 7. Characteristic for 15 is the formation of a Au₂I₂ ring, while 13 is monomeric.All compounds were studied with cyclic voltammetry. Characteristic are the reversible ferrocene Fe(II)/Fe(III) redox wave, the irreversible reduction of Au(I) to Au(0), the oxidative cleavage of the S-C(O)Me sulfur-carbon (3, 5, 7, 10 and 14) and of the sulfur-hydrogen bond (4 and 8), respectively. Electronic effects extending from the -SH-end group to the ferrocene unit resulting in considerable shifts of the redox potential of the latter entity are found. Coordination of Au(I) at the FcPPh₂ moiety also results in a shift of the redox potential of the ferrocene group indicative of an electron withdrawing effect of the Au(I) species.     

Zwitterionic diiron vinyliminium complexes: Alkylation, metalation and oxidative coupling at the S and Se functionalities

The zwitterionic vinyliminium complex [Fe₂{μ-η¹:η³-C(R′)C(S)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (2a) (R′ = p-Me-C₆H₄ (Tol), Xyl = 2,6-Me₂C₆H₃) undergoes electrophilic addition at the S atom by HSO₃CF₃, MeSO₃CF₃, SiMe₃Cl, BrCH₂Ph, ICH₂CHCH₂ affording the complexes [Fe₂{μ-η¹:η³-C(Tol)C(SX)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][Y] (X =  H, Y = SO₃CF₃, 4a; X = Me, Y = SO₃CF₃, 4b; X = SiMe₃, Y = Cl, 4c; X = CH₂Ph, Y = Br, 4d; X = CH₂CHCH₂, Y = I, 4e).Compound 2a and the corresponding vinyliminium complexes 2b and 2c (R′ = CH₂OH, 2b; R′ = Me, 2c) react also with etherated BF₃ leading to the formation of the corresponding S-adducts [Fe₂{μ-η¹:η³-C(R′)C(SBF₃)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (R′ = Tol, 5a; R′ = CH₂OH, 5b; R′ = Me, 5c).In analogous reactions, the zwitterionic vinyliminium complexes undergo S-metalation upon treatment with in situ generated [Fp]⁺[SO₃CF₃]⁻ [Fp = Fe(CO)₂(Cp)], leading to the formation of [Fe₂{μ-η¹:η³-C(R′)C(S-Fp)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃](R′ = CH₂OH, 6a; R′ = Me, 6b; R′ = Buⁿ, 6c).Similarly, zwitterionic vinyliminium containing Se in the place of S also undergo Se-electrophilic addition. Thus, the complexes [Fe₂{μ-η¹:η³-C(R′)C(SeX)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = X = Me, R′ = Tol, 7a; R = Xyl, R′ = Me, X = Fp⁺, 7b) are obtained upon treatment of the neutral zwitterionic precursors with MeSO₃CF₃ and [Fp][SO₃CF₃], respectively.Alkylation at the S or Se atom of the bridging ligand is also accomplished by CH₂Cl₂, used as solvent, although the reaction is slower compared to more efficient alkylating reagents. The complexes formed by this route are [Fe₂{μ-η¹:η³-C(R′)C(E-CH₂Cl)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][X] [E = S, R = Xyl, R′ = Tol, X = Cl, 8a; E = S, R = Xyl, R′ = Me, X = Cl, 8b; E = Se, R = R′ = Me, X = BPh₄, 8c].Finally, treatment of the zwitterionic vinyliminium complexes with I₂ results in the oxidative coupling with formation of S-S (disulfide) or Se-Se (diselenide) bond. The reactions, performed in the presence of NaBPh₄ afford the tetranuclear complexes [Fe₂{μ-η¹:η³-C(R′)C(E)CN(Me)(R)}(μ-CO)(CO)(Cp)₂]₂[BPh₄]₂ [R = Xyl, R′ = CH₂OH, E = S, 9a; R = Xyl, R′ = Me, E = S, 9b; R = Xyl, R′ = Buⁿ, E = S, 9c; R = Xyl, R′ = Me, E = Se, 9d; R = Me, R′ = Buⁿ, E = Se, 9e].The molecular structures of 4a, 8c and 9e have been determined by X-ray diffraction studies.     

Adducts of organogallium chlorides with hydrazines and the formation of dimeric dialkylgallium hydrazides possessing different ring sizes

The dialkylgallium chlorides R₂GaCl (R = Me, Et, CMe₃) reacted with hydrazines H₂N-N(H)R′ (R′ = CMe₃, C₆H₅) to form the adducts R₂ClGa ← NH₂-N(H)R′ (1-4), in which the gallium atoms are coordinated by the NH₂ nitrogen atoms of the hydrazine ligands. Treatment of these adducts with tert-butyllithium as a base afforded dialkylgallium hydrazides (R₂Ga-N₂H₂R′)₂ [5 (R = R′ = CMe₃) and 6 (R = CMe₃, R′ = C₆H₅)] by deprotonation of the hydrazine ligands and precipitation of LiCl in two cases only. The remaining adducts gave a substitution reaction at gallium or an unclear reaction course. The hydrazides 5 and 6 adopt different structures in the solid state. The tri(tert-butyl) compound 5 possesses a four-membered Ga₂N₂ heterocycle in its molecular core with two exocyclic N-N bonds, which represents the structural motif usually observed for dialkylgallium hydrazides. 6 has a five-membered Ga₂N₃ heterocycle with one endocyclic and one exocyclic N-N bond. That structure is preserved in solution as clearly shown by NMR spectroscopy. The behaviour of 5 in solution is more complicated, which may be caused by cis/trans isomerization.     

Hydride addition at μ-vinyliminium ligand obtained from disubstituted alkynes

New μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = R″ = Me, 3a; R = Me, R′ = R″ = Et, 3b; R = Me, R′ = R″ = Ph, 3c; R = CH₂Ph, R′ = R″ = Me, 3d; R = CH₂Ph, R′ = R″ = COOMe, 3e; R = CH₂ Ph, R′ = SiMe₃, R″ = Me, 3f) have been obtained b yreacting the corresponding vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2a-f) with NaBH₄. The formation of 3a-f occurs via selective hydride addition at the iminium carbon (C_α) of the precursors 2a-f. By contrast, the vinyliminium cis-[Fe₂{μ-η¹:η³-C_γ (R′) = C_β(R″)C_α = N(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R′ = R″ = COOMe, 4a; R′ = R″ = Me, 4b; R′ = Prⁿ, R″ = Me, 4c; Prⁿ = CH₂CH₂CH₃, Xyl = 2,6-Me₂C₆H₃) undergo H⁻ addition at the adjacent C_β, affording the bis-alkylidene complexes cis-[Fe₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (5a-c). The cis and trans isomers of [Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4d) react differently with NaBH₄: the former reacts at C_α yielding cis-[Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], 6a, whereas the hydride attack occurs at C_β of the latter, leading to the formation of the bis alkylidene trans-[Fe₂{μ-η¹:η²-C(Et)C(H)(Et)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (5d). The structure of 5d has been determined by an X-ray diffraction study. Other μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (R′ = R″ = Ph, 6b; R′ = R″ = Me, 6c) have been prepared, and the structure of 6c has been determined by X-ray diffraction. Compound 6b results from treatment of cis-[Fe₂{μ-η¹:η³-C_γ(Ph)C_β(Ph)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4e) with NaBH₄, whereas 6c has been obtained by reacting 4b with LiHBEt₃. Both cis-4d and trans-4d react with LiHBEt₃ affording cis-6a.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Carbosilane dendrimers containing complexes N,N′-pyridylimine of molybdenum and platinum at their periphery

Pyridylimine ligands of general formula CS-{O-4-(2,5-C₆H₂R₂)-NCH-2-Py}_n, where CS is a trimethylsilyl group (n = 1, R = H, Ia or Me, Ib) or a carbosilane dendritic framework (IIa,b, n = 4; IIIa, n = 8), have been coordinated to platinum(II) and molybdenum(0) centers to give the mononuclear [(Ia,b){PtCl₂}], tetranuclear [(IIb){PtCl₂}₄] and [(IIa){Mo(CO)₃(MeCN)}₄], and octanuclear [(IIIa){Mo(CO)₃(MeCN)}₈] complexes. The poor solubility of the polymetallic platinum compounds impedes the preparation of higher-generation dendrimers, although such a limitation is not found in the case of the more soluble molybdenum dendrimers.     

New diruthenium vinyliminium complexes from the insertion of alkynes into bridging aminocarbynes

Primary alkynes R′CCH [R′ = Me₃Si, Tol, CH₂OH, CO₂Me, (CH₂)₄CCH, Me] insert into the metal-carbon bond of diruthenium μ-aminocarbynes [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] [R = 2,6-Me₂C₆H₃ (Xyl), 1a; CH₂Ph (Bz), 1b; Me, 1c] to give the vinyliminium complexes [Ru₂{μ-η¹:η³-C(R′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] [R = Xyl, R′ = Me₃Si, 2a; R = Bz, R′ = Me₃Si, 2b; R = Me, R′ = Me₃Si, 2c; R = Xyl, R′ = Tol, 3a; R = Bz, R′ = Tol, 3b; R = Bz, R′ = CH₂OH, 4; R = Bz, R′ = CO₂Me, 5a; R = Me, R′ = CO₂Me, 5b; R = Xyl, R′ = (CH₂)₄CCH, 6; R = Xyl, R′ = Me, 7a; R = Bz, R′ = Me, 7b; R = Me, R′ = Me, 7c]. The related compound [Ru₂{μ-η¹:η³-C[C(Me)CH₂]CHCN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃], (9) is better prepared by reacting [Ru₂{μ-CN(Me)(Xyl)}(μ-CO)(CO)(Cl)(Cp)₂] (8) with AgSO₃CF₃ in the presence of HCCC(Me)CH₂ in CH₂Cl₂ at low temperature.In a similar way, also secondary alkynes can be inserted to give the new complexes [Ru₂{μ-η¹:η³-C(R′)C(R′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Bz, R′ = CO₂Me, 11; R = Xyl, R′ = Et, 12a; R = Bz, R′ = Et, 12b; R = Xyl, R′ = Me, 13). The reactions of 2-7, 9, 11-13 with hydrides (i.e., NaBH₄, NaH) have been also studied, affording μ-vinylalkylidene complexes [Ru₂{μ-η¹:η³-C(R′)C(R″)C(H)N(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Bz, R′ = Me₃Si, R″ = H, 14a; R = Me, R′ = Me₃Si, R″ = H, 14b; R = Bz, R′ = Tol, R″ = H, 15; R = Bz, R′ = R″ = Et, 16), bis-alkylidene complexes [Ru₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (R′ = Me₃Si, R″ = H, 17; R′ = R″ = Et, 18), acetylide compounds [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(CCR′)(Cp)₂] (R = Xyl, R′ = Tol, 19; R = Bz, R′ = Me₃Si, 20; R = Xyl, R′ = Me, 21) or the tetranuclear species [Ru₂{μ-η¹:η²-C(Me)CCN(Me)(Bz)}(μ-CO)(CO)(Cp)₂]₂ (23) depending on the properties of the hydride and the substituents on the complex. Chromatography of 21 on alumina results in its conversion into [Ru₂{μ-η³:η¹-C[N(Me)(Xyl)]C(H)CCH₂}(μ-CO)(CO)(Cp)₂] (22). The crystal structures of 2a[CF₃SO₃] · 0.5CH₂Cl₂, 12a[CF₃SO₃] and 22 have been determined by X-ray diffraction studies.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Synthesis and structures of o-phenylene-bridged Cp/phosphinoamide titanium complexes

Addition of R′₂PCl to anilines substituted with di- or trimethylcyclopentadienyl unit at ortho-position affords ortho-phenylene-bridged Me₂Cp or Me₃Cp/phosophinoamide ligands, 2-(RMe₂C₅H₂)C₆H₄NHPR′₂ (R = Me or H; R′ = Ph, iPr, or Cyclohexyl). Successive addition of Ti(NMe₂)₄ and Me₂SiCl₂ to the ligands affords the desired dichlorotitanium complexes, [2-(η⁵-RMe₂C₅H)C₆H₄NPR′ ₂− κ²N,P]TiCl₂ (R = H, R′ = Ph, 9; R = Me, R′ = Ph, 10; R = H, R′ = iPr, 11; R = Me, R′ = iPr, 12; R = H, R′ = Cy, 13; R = Me, R′ = Cy, 14). By using Zr(NMe₂)₄ instead of Ti(NMe₂)₄, a zirconium complex, [2-(η⁵-Me₃C₅H)C₆H₄NP(iPr)₂−κ²N,P]ZrCl₂ (15) is prepared. Molecular structures of 10, 14 and [2-(η⁵-Me₂C₅H₂)C₆H₄NPPh₂− κN]Ti(NMe₂)₂ (16) were determined. The metric parameters determined on the X-ray crystallographic studies and the chemical shifts of the ³¹P NMR signal indicate that the phosphorous atom coordinates to the titanium in the dichloro-complexes 9-15. The titanium and zirconium complexes show negligible activity in ethylene and ethylene/1-hexene (co)polymerization when activated with MAO or iBu₃Al/[Ph₃C][B(C₆F₅)₄].     

Structural diversity of di and triorganotin complexes with 4-sulfanylbenzoic acid: Supramolecular structures involving intermolecular Sn?O, O-H?O or C-H?X (X = O or S) interactions

Twelve new organotin complexes with 4-sulfanylbenzoic acid of two types: R_nSn[S(C₆H₄COOH)]_4−n (I) (n = 3: R = Me 1, n-Bu 2, Ph 3; PhCH₂4; n = 2: R = Me 5; n-Bu 6, Ph 7, PhCH₂8) and R₃Sn(SC₆H₄COO)SnR₃ · mEtOH (II) (m = 0: R = Me 9, n-Bu 10, PhCH₂12; m = 2: R = Ph 11), along with the 4,4′-bipy adduct of 9, [Me₃Sn(SC₆H₄COO)SnMe₃]₂(4,4-bipy) 13, have been synthesized. The coordination behavior of 4-sulfanylbenzoic acid is monodentate in 1-8 by thiol S atom but not carboxylic oxygen atom. While, in 9-13 it behaves as multidenate by both thiol S atom and carboxylic oxygen atoms. The supramolecular structures of 6, 11 and 13 have been found to consist of 1D molecular chains built up by intermolecular O-H?O, C-H?O or C-H?S hydrogen bonds. The supramolecular aggregation of 7 is 2D network determined by two C-H?O hydrogen bonds. Extended intermolecular C-H?O interactions in the crystal lattice of 9 link the molecules into a 2D network.