Pd/PMO-SBA-15 催化剂催化苯甲醇选择氧化反应性能

 研究了 PMO-SBA-15 材料负载的金属钯纳米粒子 (Pd/PMO-SBA-15) 在水相中催化苯甲醇选择氧化制苯甲醛的反应. 考察了纳米粒子种类、氧化剂用量、反应时间和反应温度等对苯甲醇转化率及苯甲醛选择性的影响. 结果表明, 以水为溶剂, 以 H2O2 (30%) 为氧化剂时, 可得到较高的苯甲醇转化率和苯甲醛选择性. 当以 0.05 g 的 2%Pd/PMO-SBA-15 为催化剂, H2O2 用量为 1.5 ml, 反应温度为 80 oC, 反应 4 h 时, 苯甲醇转化率和苯甲醛选择性分别达到 97.1% 和 100.0%. 对该催化体系的重复使用性能进行了考察. 结果发现, 随着使用次数的增加, 苯甲醇转化率有所下降, 但苯甲醛选择性保持不变.     

多金属氧酸盐催化苯甲醇的选择性氧化：一个绿色可循环的高效催化氧化体系

以Keggin结构的几类杂多酸和三乙胺(TEA)为原料,通过简单的酸碱反应合成了相应杂多酸的TEA盐。并以它们作为催化剂,30%H2O2作氧化剂,在不使用长链相转移剂的条件下,研究了它们催化苯甲醇选择氧化制备苯甲醛的反应性能。结果表明,该类催化剂在苯甲醇的选择氧化反应中具有比相应杂多酸更高的催化活性或选择性。其中[TEAH]H2PW12O40为最佳催化剂,在适宜的反应条件下,该催化剂上苯甲醇转化率可达99.5%以上,苯甲醛选择性达～100%。催化剂可以被分离和循环使用多次,活性、选择性基本不变。用水作溶剂,避免了有机溶剂的使用,是一个高效、绿色的苯甲醛选择氧化体系。     

醋酸溶液中Pd(OAc)2-对苯醌-CO催化甲烷选择氧化制甲醇

考察了Pd(OAc)2-对苯醌-CO催化剂体系中甲烷有氧选择氧化制甲醇反应的性能。结果表明,在Pd(OAc)2用量为100μmol时,该催化剂体系中对苯醌和CO的最佳用量分别是1 000μmol和0.4 MPa。在讨论反应温度、反应时间及反应溶剂对甲烷选择氧化影响的基础上,得出在原料气组成为2.5 MPa甲烷+0.4 MPa氧气+0.4 MPa氮气及最佳催化剂用量的条件下,该催化剂体系选择性催化氧化甲烷的适宜工艺条件为反应温度130℃、反应时间3 h、溶剂中CH3COOH与H2O的体积比为4∶1。在此工艺条件下,目标产物甲醇的生成量为1 650μmol。     

Mo／La－Co－O催化剂上甲烷选择氧化制甲醇反应

 制备了一系列Mo／La－Co－O催化剂，考察了催化剂对甲烷选择氧化制甲醇反应的催化性能，并用BET，XRD，LRS，H2－TPR和XPS等技术研究了催化剂的结构和性质．结果表明，在n（CH4）∶n（O2）∶n（N2）＝10∶1∶1，SV＝14．4L／（g·h），p＝4．2MPa和θ＝420℃的反应条件下，7％Mo／La－Co－O催化剂表现出较好的催化性能，甲醇选择性为60％，甲醇收率为6．7％．Mo负载于La－Co－O上以后，Mo－O物种以无定形的状态存在于La－Co－O表面，并与La－Co－O发生相互作用．Mo的负载量影响Mo－O物种的结构及催化剂的性质．催化剂的还原性和表面O－／O2－比影响催化剂上甲烷选择氧化制甲醇反应的性能．     

Keggin型磷钼钒季铵盐催化氧化苯制苯酚反应研究

采用分步反应、分步酸化法制备了磷钼钒缺位型杂多酸,用（C4H9）4N^＋（以下简写为Bu4N^＋）阳离子取代杂多酸中H^＋作为反荷离子合成了杂多季铵盐（用于苯氧化制苯酚反应）．FT-IR分析反应前后催化剂结构的变化．以苯为原料,乙酸为溶剂,30％H2O2作氧化剂,系统考察了催化剂类型、催化剂用量、氧化剂用量、反应时间及温度对反应的影响．实验结果表明,56．4mmol苯在（Bu4N）5PMo10V2O40用量0．25mmol,30％H2O2用量10mL,溶剂乙酸10mL,70℃条件下回流反应6h,苯酚收率可达到27．9％．     

过氧钨、钼酸化合物催化氧化苯甲醇合成苯甲醛的研究

合成了六种过氧钨酸、钼酸盐,考察了它们在无溶剂、无卤素条件下用30%H2O2氧化苯甲醇合成苯甲醛反应中的催化活性。结果表明,该体系是一种高效的环境友好催化体系。三种过氧钨酸盐在反应过程中显示了较高的活性,在70℃下,反应2h,苯甲醛的收率和选择性都分别达到95.1%和96.2%。相比较而言,三种过氧钼酸盐的催化活性要低的多。实验考察了催化剂加入量、H2O2加入量、温度、时间等条件对催化剂活性的影响,确立了最佳反应条件为:0.08mmol催化剂,苯甲醇与H2O2的最佳摩尔比为1∶1.1,反应温度为70℃,反应时间为2h。     

Cu-BTC及其衍生物在苯甲醇选择氧化反应中的催化活性

以硝酸铜和均苯三甲酸(BTC)为原料,水热合成了一种金属有机骨架化合物Cu-BTC,在水相中催化苯甲醇选择氧化反应,H2O2氧化剂,优化了Cu-BTC的晶化条件.70℃反应1 h,Cu-BTC(110C/24 h)上的苯甲醇转化率为75.4%、苯甲醛选择性83.5%,但反应后Cu-BTC骨架完全塌陷.在氮气中高温焙烧Cu-BTC,制得衍生物Cu@C,也用于催化苯甲醇氧化反应.结果表明:Cu@C催化剂重复使用5次,可维持较高的苯甲醇转化率,但苯甲醛选择性有所下降.用X射线衍射(XRD)、N2物理吸附(BET)、热分析(TG-DSC)、红外光谱(FTIR)、能量色散X射线光谱分析(EDX)等技术对催化剂进行了结构表征,发现:Cu@C在反应中生成的Cu2O促进了苯甲醛的深度氧化.     

负载Cr(VI)纳米Fe_3O_4磁性高分子材料的催化性能

采用氨基功能化纳米Fe3O4磁性高分子材料(NH2-NMPs)处理含Cr(VI)水溶液,得到了吸附重金属Cr(VI)后回收材料(Cr-NH2-NMPs).通过透射电镜(TEM)、振动样品磁强计(VSM)、热重差热分析(TGA)、X射线粉末衍射(XRD)、红外光谱(FTIR)等对其进行表征.着重研究了以苯甲醇为底物,30%的H2O2为氧化剂,Cr-NH2-NMPs对醇的选择性氧化的催化性能.详细考察了H2O2用量与加入方式、反应时间、反应温度、反应体系中加入酸的种类与用量、催化剂用量、溶剂种类等因素对催化氧化性能的影响,推导出可能的催化机理.结果表明:吸附重金属Cr(VI)后回收材料(Cr-NH2-NMPs)能有效催化苯甲醇氧化至苯甲醛.反应温度为70℃,环己烷为溶剂,在适量质子酸作用下,H2O2与苯甲醇的物质的量比为3.2:1时,苯甲醇的转化率及苯甲醛的选择性均达100%,可以实现"变废为宝"的目的.     

用环境友好催化剂俣成丙酸苄酯的研究

应用环境友好催化剂H－β沸石催化苯甲醇与丙酸的酯化反应,合成了丙酯苄酯。研究结果表明,H－β沸石 具有较高的催化活性。考察了苯甲醇／丙酸摩尔比、催化剂用量、反应温度、反应时间和带水剂环己烷用量对酯产率的影响。在典型反应条件（苯甲醇／丙酸摩尔比＝1.15:1、10.5gH－β沸石/摩尔丙酸、反应温度160℃ 、反应时间3.5h和20mL环己烷／摩尔丙酸）下,所得丙酸苄酯的产率为77％,该催化剂易于回收且可重复使用,具有良好的活性稳定性,并研究了用某些金属阳离子改性的β沸石的催化活性。     

改性活性炭表面羧基的催化动力学分析

采用催化动力学分析法测定了浓HNO3或H2O2改性处理的活性炭表面羧基。选择环氧苯乙烷和甲醇在苯甲酸或改性活性炭催化下的加成反应为指示反应，采用固定时间法考察了环氧苯乙烷转化率与催化剂用量关系。结果表明：在反应初始阶段（转化率低于25％），当苯甲酸用量在O．2～0．6mmol、活性炭用量在0．4～0．8g范围内时，环氧苯乙烷的转化率随反应时间的变化为过原点的直线。以苯甲酸羧基量为参照，浓HNO3与H2O2氧化改性活性炭的表面羧基的质量摩尔浓度分别为0．67mmol／g和0．34mmol／g。与经典的Boehm滴定法相比，此法准确地反映了实际液-固反应中活性炭的表面羧基量。     

新型温度敏感性自组装胶束P(NiPAAm-co-DMAA)-co-P(L-Ala)的合成和性能

通过原子转移自由基聚合(ATRP)合成了一种带有活性—NH2基团的温度敏感性亲水型共聚物P(NiPAAm-co-DMAA), 并将其作为引发剂, 合成了P(NiPAAm-co-DMAA)-co-P(L-Ala), 其分子量分布(PDI)在1.3左右. 聚合物通过自组装形成纳米胶束. 透射电镜(TEM)结果表明, 胶束大小200~300 nm, 具有明显的核壳结构. 共聚物的最低临界溶解温度(LCST)为45.5 ℃. 温度低于LCST时, 聚合物溶解形成胶束; 高于LCST时, 胶束解离, 聚合物不溶. 聚合物对温度的响应是快速而可逆的.     

手性二噁唑啉吡啶铁和镍配合物的制备与表征

Tridentate bis(oxazolinylpyridine)(1) reacted with nickel chloride or ferrous chloride in anhydrous ethanol to form bis(oxazolinylpyridine) Nickel(Ⅱ) and Iron(Ⅱ) complexes. The stable solid complexes were characterized with IR， UV， MS， XPS and elemental analysis. No stable complexes were formed with bidentate bis(oxazoline)(2) ins- tead of bis(oxazolinylpyridine).     

Asymmetric Synthesis of (R)-and (S)-Moprolol

A simple and effective procedure for the enantioselective synthesis of (R)-and (S)-moprolol was described.The key step was the asymmetric synthesis of enantiopure (R)-and (S)-guaifenesin,which were synthesized from enantioenriched (R)-3-chloro-1,2-propanediol and (S)-epichlorohydrin via kinetics of hydrolysis resolution of racemic epichlorohydrin by chiral Salen-CoIIII complex.The e.e.values of both the optical compounds were above 98%,and the chemical structures of the target compounds were confirmed by 1H NMR,13C NMR,IR,and MS.     

U(IV)/LN(III) unexpected mixed site in polymetallic oxalato complexes. Part II. Substitution of U(IV) for Ln(III) in the new oxalates (N2H5)Ln(C2O4)2·nH2O (Ln=Nd, Gd)

Two new hydrazinium lanthanide(III) oxalates, (N₂H₅)[Nd(C₂O₄)₂(H₂O)]·4H₂O (1) and (N₂H₅)[Gd(C₂O₄)₂(H₂O)]·4.5H₂O (2) have been prepared and their crystal structures determined by single-crystal X-ray diffraction. The crystal structures were solved by the direct methods and Fourier difference techniques, and refined by a least-squares method on the basis of F² for all unique reflections. Crystallographic data: 1, triclinic, space group , , b=9.762(4), , α=62.378(5), β=76.681(5), γ=73.858(5), Z=2, R₁=0.0335 for 172 parameters with 3430 reflections with I?2σ(I); 2, triclinic, space group , , b=9.51(3), , α=62.11(4), β=76.15(5), γ=73.73(5), Z=2, R₁=0.0325 for 172 parameters with 1742 reflections with I?2σ(I). The two isotypic structures are built from a three-dimensional (3D) arrangement of lanthanide and oxalate ions. The lanthanide atom is coordinated by eight oxygen atoms from four tetradentate oxalate ions and one aqua oxygen. Alternating lanthanide and oxalate ions form six-membered rings that delimit tunnels running down three directions and occupied by hydrazinium and water molecules. Starting from these lanthanide(III) compounds two isotypic mixed Ln(III)/U(IV) oxalates, (N₂H₅)_0.75[Nd_0.75U_0.25(C₂O₄)₂(H₂O)]·4.5H₂O (3) and (N₂H₅)_0.75[Gd_0.75U_0.25(C₂O₄)₂(H₂O)]·4H₂O (4), are obtained by partial substitution of Ln(III) by U(IV) in the nine-coordinated site, the charge excess being compensated by removal of monovalent ions from the tunnels. Finally, using Na⁺ gel, two mixed Ln(III)/U(IV) sodium oxalates, Na_0.5[Nd_0.5U_0.5(C₂O₄)₂(H₂O)]·3H₂O (5) and Na_0.65[Gd_0.65U_0.35(C₂O₄)₂(H₂O)]·4.5H₂O (6) have been obtained without any change in the 3D framework.     

界面缩聚法合成双(烯基环戊二烯基)钛(锆)聚醚的研究

本文通过界面缩聚法利用双(烯基环戊二烯基)钛(锆)二氯化物与二酚反应,制成了16个新的高分子化合物,对它们进行了IR、TGA和分子量的测定。文中还对反应条件与分子量的关系进行了讨论。     

U(IV)/Ln(III) unexpected mixed site in polymetallic oxalato complexes. Part I. Substitution of Ln(III) for U(IV) from the new oxalate (NH4)2U2(C2O4)5·0.7H2O

A new ammonium uranium (IV) oxalate (NH₄)₂U₂(C₂O₄)₅·0.7H₂O (1) and three mixed uranium (IV)-lanthanide (III) oxalates, (N₂H₅)_2.6U_1.4M_0.6(C₂O₄)₅·xH₂O (M=Nd (2) and M=Sm (3)), Na_2.56U_1.44Nd_0.56(C₂O₄)₅·7.6H₂O (4) and Na₃UCe(C₂O₄)₅·10.4H₂O (5), have been prepared. The crystal structures of compounds 1, 4 and 5 have been determined by single-crystal X-ray diffraction. The crystal structures were solved by the direct methods and Fourier difference techniques, and refined by a least square method on the basis of F² for all unique reflections. Compounds 2 and 3 are isotypic with 1. Crystallographic data: 1, hexagonal, space group P6₃/mmc, a=19.177(3), c=12.728(4) Å, Z=6, R₁=0.0575 for 52 parameters with 1360 reflections with I?2σ(I); 2, hexagonal, space group P6₃/mmc, a=19.243(4), c=12.760(5) Å, Z=6; 3, hexagonal, space group P6₃/mmc, a=19.211(3), c=12.274(4) Å, Z=6; 4, orthorhombic, space group Pbcn, a=18.79(3), b=11.46(1), c=12.77(2) Å, Z=4, R₁=0.0511 for 183 parameters with 3026 reflections with I?2σ(I); 5, monoclinic, space group C2/c, a=18.878(6), b=11.684(4), c=12.932(4) Å, β=95.97(1)°, Z=4, R₁=0.0416 for 213 parameters with 4060 reflections with I?2σ(I). The honeycomb-like structure of the five compounds is built from the same three-dimensional arrangement of metallic and oxalate ions. Similar hexagonal rings of alternating metallic and oxalate ions form layers parallel to the (001) plane that are pillared by another oxalate ion. Indeed, some torsions or rotations of the bridging oxalate ligands led to modifications of the network symmetry. The monovalent cations and the water molecules occupy the hexagonal tunnels running down the [001] direction. Starting from the uranium (IV) compound A₂U₂(C₂O₄)₅·0.7H₂O with A=NH₄⁺ (1), the mixed U(IV)/Ln(III) oxalates are obtained by partial substitution of U(IV) by Ln(III) in a ten-coordinated site, the charge deficit being compensated by intercalation of supplementary monovalent ions within the tunnels. The distortion of the arrangement in the [001] direction for the Na-containing compounds allows the accommodation of a greater number of water molecules that insure an octahedral coordination of the Na atoms.     

Molecular structure of (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide. Synthesis of (3,5-diallylisocyanuratomethyl)phosphine sulfides

X-Ray study of the (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide showed that the phosphorylmethyl group is bonded to the nitrogen atom of the cycle. Reaction of the tris(chloromethyl)phosphine sulfide with sodium diallylisocyanurate gave (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide, and treatment of the tris(3,5-diallylisocyanuratomethyl)phosphine oxide with phosphorus pentasulfide gave a tris(3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1446–1448, August, 1993.     

Fluorinated phosphorus compounds: Part 6. The synthesis of bis(fluoroalkyl) phosphites and bis(fluoroalkyl) phosphorohalidates

Reaction of phosphorus trichloride with tert-butanol and fluoroalcohols gave bis(fluoroalkyl) phosphites (R_FO)₂P(O)H in 42-89% yield, where R_F=HCF₂CH₂, H(CF₂)₂CH₂, H(CF₂)₄CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH, CF₃(CH₃)₂C, (CF₃)₂CH₃C, CF₃CH₂CH₂, C₄F₉CH₂CH₂ and C₆F₁₃CH₂CH₂. Treatment of these with chlorine in dichloromethane gave the bis(fluoroalkyl) phosphorochloridates (R_FO)₂P(O)Cl in 49-96% yield. The chloridate (CF₃CH₂O)₂P(O)Cl was isolated in much lower yield from the interaction of thionyl chloride with bis(trifluoroethyl) phosphite. Heating the latter in dichloromethane with potassium fluoride and a catalytic amount of trifluoroacetic acid gave the corresponding fluoridate (CF₃CH₂O)₂P(O)F in 84% yield. Treatment of bis(trifluoroethyl) phosphite with bromine or iodine gave the bromidate (CF₃CH₂O)₂P(O)Br and iodidate (CF₃CH₂O)₂P(O)I in 51 and 46% yield, respectively. The iodidate is the first dialkyl phosphoroiodidate to have been isolated and characterised properly—its discovery lags behind the first isolation of a dialkyl phosphorochloridate by over 130 years. The fluoroalkyl phosphoryl compounds are generally more stable than known unfluorinated counterparts.     

龙涎香的组成及降龙涎醚的合成研究进展

简要介绍了龙涎香的应用及其化学组成,重点介绍了以香紫苏醇为原料,通过不同的氧化-还原-环化途径合成降龙涎醚。