Ternary Systems LiBr–LiVO<Subscript>3</Subscript>–Li<Subscript>2</Subscript>CrO<Subscript>4</Subscript> and KBr–KVO<Subscript>3</Subscript>–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

The binary system KVO₃–K₂CrO₄ and two ternary systems, LiBr–LiVO₃–Li₂CrO₄ and KBr–KVO₃–K₂CrO₄, were studied. In the ternary systems, the compositions and melting points of eutectic alloys were determined by differential thermal analysis: (49.0 mol % LiBr, 5.0 mol % LiVO₃, 46.0 mol % Li₂CrO₄, 400°C) and (17.0 mol % KBr, 78.0 mol % KVO₃, 5.0 mol % K₂CrO₄, 458°C), respectively.     

Multicomponent systems LiCl–LiBr–Li<Subscript>2</Subscript>SO<Subscript>4</Subscript> and LiCl–LiBr–Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>–Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>

Phase equilibria in the LiCl–LiBr–Li₂SO₄ ternary system and the LiCl–LiBr–Li₂SO₄–Li₂MoO₄ quaternary system were studied by differential thermal analysis. The compositions and temperatures of minima in the ternary and quaternary systems were determined to be (31.2 mol % LiCl, 46.8 mol % LiBr, 22.0 mol % Li₂SO₄, 460°C) and (25.2 mol % LiCl, 30.2 mol % LiBr, 14.6 mol % Li₂SO₄, 30.0 mol % Li₂MoO₄, 411°C), respectively.     

Structure and thermal properties of the fritted glazes in SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaO–MgO–Na<Subscript>2</Subscript>O–K<Subscript>2</Subscript>O–ZnO system

In this work, the structure and thermal properties of aluminosilicate fritted glazes in SiO₂–Al₂O₃–CaO–MgO–Na₂O–K₂O–ZnO system with (4.0 mol%) and without addition of ZnO were examined by GIXRD, FTIR, MAS-NMR and thermal methods (DTA, DIL). It has been found that the all experimental glazes are amorphous material (transparent glazes). On the base of spectroscopic investigations, it was found that zinc ions exist in the network glazes in the octahedral coordination—Zn²⁺ ions play a network modifier role in structure of glazes. An analysis of the data obtained from thermal tests showed that addition of ZnO into chemical composition results in decrease in glass transition temperature value (T _g) for all glazes (DTA, DIL). The coefficient of thermal expansion (α) is decreased as the whole measurement range for one series of fritted glazes.     

Solid-Liquid Equilibria in the Quaternary Systems KCl–MgCl<Subscript>2</Subscript>–SrCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O and NaCl–KCl–SrCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O at 348 K

Solid-liquid equilibria in the quaternary systems KCl–MgCl₂–SrCl₂–H₂O and NaCl–KCl–SrCl₂–H₂O at 348 K were measured by the isothermal solution saturation method. The composition of the equilibrium solid phase, solubilities of salts, and densities of saturated solution in the two systems were determined. Phase diagrams, water content diagrams and solution density diagrams of quaternary systems were plotted according to experimental data. The phase diagram of the quaternary system NaCl–KCl–SrCl₂–H₂O has one invariant point, three univariant curves as the boundary of NaCl, KCl and SrCl₂ · 2H₂O. This phase diagrams were simple co-saturation type without complex salt and solid solution. For the quaternary system KCl–MgCl₂–SrCl₂–H₂O, one complex salt KCl · MgCl₂ · 6H₂O (Car) had been found in this system, consisted of five univariant curves, two invariant points and four crystallization regions of MgCl₂ · 6H₂O (Bis), KCl, SrCl₂ · 2H₂O and KCl · MgCl₂ · 6H₂O. And the densities transformation rules were simply discussed. Simultaneously, the solubilities and densities data in invariant point of the quaternary system NaCl–KCl–SrCl₂–H₂O had been compared with the experimental data of previous researchers.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Interaction in the systems TlBiSe<Subscript>2</Subscript>–Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–PbSe and Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–Tl<Subscript>4</Subscript>PbSe<Subscript>3</Subscript>–PbSe

Phase equilibria in the systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₉BiSe₆–Tl₄PbSe₃–PbSe were studied by differential thermal, X-ray powder diffraction, and microstructural analyses. State diagrams of the quasi-binary sections Tl₉BiSe₆–Tl₄PbSe₃, TlBiSe₂–PbSe, and Tl₉BiSe₆–PbSe were constructed, and so were projections of liquidus surfaces and isothermal sections at 600 K for the secondary quasi-ternary systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₄PbSe₃–Tl₉BiSe₆–PbSe. The coordinates of invariant points and the boundaries of solid solutions were determined.     

System RbF–RbBr–Rb<Subscript>2</Subscript>SO<Subscript>4</Subscript>

The three-component system RbF–RbBr–Rb₂SO₄ has been studied by differential thermal analysis (DTA). The melting temperatures and compositions corresponding to a eutectic point and a peritectic point have been determined. Invariant, monovariant, and divariant equilibrium states are described.     

Thermal characterisation of raw aluminosilicate glazes in SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaO–K<Subscript>2</Subscript>O–Na<Subscript>2</Subscript>O–ZnO system with variable content of ZnO

Thermal properties of raw aluminosilicate ceramic glazes in the multicomponent system of SiO₂–Al₂O₃–CaO–K₂O–Na₂O–ZnO modified by ZnO addition were studied by differential thermal analysis (DTA), dilatometry (DIL), hot-stage microscopy (HSM), X-ray diffraction and fourier transform infrared spectroscopy (FTIR). Using the method of differential thermal analysis, the ways in which zinc oxides affect the temperature of transition (T _g), crystallisation (T _c) were determined. An analysis of the DTA data obtained during thermal tests showed that an increase in ZnO content results in decreasing the T _g value. Also, the influence of ZnO on characteristic temperatures and viscosity of glazes was checked. The introduction of zinc oxide (ZnO) into the glaze composition contributes to the decrease in viscosity of such glazes. An increasing ZnO content in the glazes also causes the reduction in softening (T _s), half-sphere (T _half-sphere) and fusion (T _fusion) temperatures. The mid-infrared spectroscopy showed that the thermal properties of glazes in SiO₂–Al₂O₃–CaO–K₂O–Na₂O–ZnO system modified by addition of ZnO can be associated with the depolymerising influence of zinc ions on the structure of the tested glazes.     

Ionic mobility and electrophysical properties of solid solutions in PbF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> and PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> systems

Ionic mobility and electrical conductivity of solid solutions with fluorite structure, obtained with solid-state approach in PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems, are studied by 19F NMR and electrochemical impedance spectroscopy methods. The 19F NMR spectra parameters, types of ion motions in the fluoride sublattice, and the ionic conductivity magnitude are shown to be determined by the temperature and fluoride concentration in the solid solutions. The solid solution specific conductivity in the PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems at 420–450 K is as high as ~10^–2 S/cm, which allows accounting the solid solutions as a base for preparation of functional materials.     

Distribution of niobium and lanthanum between two immiscible melts in the system LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The system LaPO₄–SiO₂–NaF–Nb₂O₅–Fe₂O₃ is characterized by immiscibility fields in the liquid state region. Addition of iron expands fields of immiscibility of melts and decreases the temperature of their coexistence. A fraction of 87–90% of niobium is extracted into iron silicate melt, and 92–98% of lanthanum is extracted into phosphate salt melt.     

The Sections GeSnSb<Subscript>4</Subscript>Te<Subscript>8</Subscript>–GeTe and GeSnSb<Subscript>4</Subscript>Te<Subscript>8</Subscript>–SnTe of the Quasi-Ternary System GeTe–Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript>–SnTe

By differential thermal, X-ray powder diffraction, and microstructural analyses and microhardness and density measurements, phase equilibria in the sections GeSnSb₄Te₈–GeTe and GeSnSb₄Te₈–SnTe were studied and their state diagrams were constructed. It was determined that these sections are quasi-binary sections of the eutectic type of the GeTe–Sb₂Te₃–SnTe system. The coordinates of the eutectic points in the sections GeSnSb₄Te₈–GeTe and GeSnSb₄Te₈–SnTe are (40 mol % GeTe, 700 K) and (30 mol % SnTe, 750 K), respectively. Regions of solid solutions based on the initial components in the sections were identified. Alloys in the regions of solid solutions are p-type semiconductors.     

Phase equilibria in the NaCl–NaBO<Subscript>2</Subscript>–Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>–KCl quaternary system

The phase diagrams of the ternary systems NaCl–NaBO₂–KCl, NaCl–KCl–Na₂CO₃, and KCl–NaBO₂–Na₂CO₃ and the quaternary system NaCl–NaBO₂–Na₂CO₃–KCl were studied by the calculation–experimental method and differential thermal analysis. Analytical models of phase equilibria were obtained, and the coordinates of ternary eutectics and a quaternary eutectic. It was shown that low-melting eutectic melts can be used as media for synthesizing oxide tungsten bronzes.     

Thermoelectric power and electrochemical studies on CdI<Subscript>2</Subscript>–Ag<Subscript>2</Subscript>O–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

A quaternary super-ion-conducting system, 20CdI₂ − 80[xAg₂O − y(0.7V₂O₅ − 0.3B₂O₃)] where 1 ≤ x/y ≤ 3, has been prepared by melt quenching technique. The electrical conductivity measured was the order of 10⁻⁴  S/cm at room temperature. The values of silver-ion transport number obtained by electromotive force technique are nearly unity. The thermoelectric power and electrochemical studies were done on the CdI₂–Ag₂O–V₂O₅–B₂O₃ system. The discharge and polarization characteristics were examined for different cathodes to evaluate the utility of these cells as power sources for low energy applications.     

Coexistence of Immiscible Liquid Phases in the LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> System

It was determined that the system LaPO₄–SiO₂–NaF–Nb₂O₅ within the temperature range 850–1200°C has regions of immiscibility of liquid phases (silicate and phosphate–salt melts). The coexisting melts have contrast chemical and phase compositions and structural-textural features, because of which the methods for extracting rare-earth elements and niobium from these melts differ. The silicate melts form glass, whereas the phosphate–salt melts have high crystallization ability. The mutual solubility of the liquid phases does not exceed 5%. The components of the system are contrastively distributed between the silicate and phosphate–salt melts. A fraction of 95–97% of niobium is extracted into the silicate melt, and 93–95% of La and P is extracted into the phosphate–salt melt.     

Phase Equilibria in the System LiF–KI–KF–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

Phase equilibria were experimentally studied in the system LiF–KI–KF–K₂CrO₄, which is the stable tetrahedron of the quaternary reciprocal system Li, K∥F, I, CrO₄. Differential thermal analysis revealed the compositions and transformation temperatures at the eutectic point E^□ 488 (L ? LiF + KF + KI + α-K₂CrO₄) and the peritectic point P^□ 510 (L + K₃FCrO₄ ? KI + α-K₂CrO₄ + KF). A computer model of the phase complex of the system was built, which can predict phase transformations at an arbitrary composition in the system. Isothermal sections of the systems were constructed, using which the phase composition at the temperature of the section can be calculated.     

Thermal properties and crystallization of MgO–FeO<Subscript>x</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Five novel bridged heptaphenyl polyhedral oligomeric silsesquioxanes (POSSs), in which two identical silicon cages R₇(SiO_1.5)₈ (with R = Phenyl) are linked to various aliphatic [(CH₂) _n with n = 2, 6 and 10] and aromatic (Ar–Ar and Ar–O–Ar, where Ar = p-C₆H₄) bridges, were synthesized. The obtained compounds were characterized by elemental analysis and ¹ H NMR spectroscopy, and the results were in very good agreement with those of expected products. The synthesized heptaphenyl POSSs were thermally degraded, in dynamic heating conditions (25–700 °C), in both flowing nitrogen and static air atmosphere. The temperatures at 5% mass loss (T _5%) and residues at 700 °C were thus determined to evaluate their resistance to thermal degradation, but no substantial difference was found between the values in the two studied environments. The obtained T _5% values were much higher than those of the corresponding isobutyl and cyclopentyl POSSs we investigated in the past. Also, the T _5% values of the phenyl POSSs with aliphatic bridges decreased quite linearly on increasing the number of bridge carbon atoms (n _C). This behaviour was interpreted and attributed to the presence of the external corona formed by voluminous phenyl groups. The residue at 700 °C, which was largely higher than those of the corresponding isobutyl and cyclopentyl POSSs, was a further confirmation of the better thermal stability of the compounds here studied.     

Phase Equilibria in the System Tl<Subscript>9</Subscript>SbSe<Subscript>6</Subscript>–TlSbSe<Subscript>2</Subscript>–Tl<Subscript>4</Subscript>SnSe<Subscript>4</Subscript>

For the first time, by differential thermal, X-ray powder diffraction, and microstructural analyses, phase equilibria in the ternary system Tl₉SbSe₆–TlSbSe₂–Tl₄SnSe₄ were investigated and the state diagram of the polythermal section Tl₄SnSe₄–Tl₃SbSe₃, the projection of the liquidus surface on the concentration triangle, and the isothermal section at 423 K were constructed. The types and coordinates of invariant processes, the lines of monovariant equilibria, and their temperature ranges were found. The formation mechanism and nature of solid solutions based on ternary compounds Tl₉SbSe₆ and TlSbSe₂ were studied in terms of crystal chemistry.     

Glass Formation in the Ternary System La<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>S<Subscript>3</Subscript>–Er<Subscript>2</Subscript>O<Subscript>3</Subscript>

The boundaries of the glass formation region in the ternary system La₂O₃–As₂S₃–Er₂O₃ were found. Transparent glass of composition (La₂O₃)_0.03(As₂S₃)0.90(Er₂O₃)0.07 was studied by X-ray photoelectron and Raman spectroscopy. The intensities of the bands characterizing As–S, La–O, and Er–O bonds increased, and these bands were shifted toward higher energies. This was due to an increase in the covalence of these bonds and probably due to the formation of new bonds in the glasses. Samples in the glass formation region are resistant at 300 K to air, water, and organic solvents.     

Mass attenuation coefficients of B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–CaF<Subscript>2</Subscript> glass system at 0.662 and 1.25 MeV gamma energies

The total mass attenuation coefficients, partial interaction and the effective atomic numbers (Z_eff) of glass system (80−x)B₂O₃–10Al₂O₃–10SiO₂–xCaF₂ (where x = 5, 10, 20, 25, 30, 35 and 40 mol %) have been calculated at photon energies 0.662 and 1.25 MeV using the WinXCom software on the basis of mixture rule. Results indicated that the total mass attenuation coefficients showed a decrease with increasing the CaF₂ concentration, due to a decrease in Compton scattering probability, which gave a dominant contribution to the total mass attenuation coefficients for the studied glass samples at both energies. However, the photoelectric absorption and coherent scattering showed an increase with increasing the CaF₂, concentrations at same energies. For a comparison, the total mass attenuation coefficients of the glass system had lower values at the energy 1.25 MeV than that at 0.662 MeV. Z_eff was found to increase linearly with the increase of CaF₂ concentrations. It was concluded that low CaF₂ concentrations in glass system, under study, have Z_eff close to that of human tissue and have higher total absorption coefficients at energy of 0.662 MeV than that at 1.25 MeV. These results are very useful in designing gamma radiation detectors using thermoluminescence technique. Therefore, it is recommended to use low CaF₂ concentration of our glass system as good gamma detectors at energy of 1.25 MeV.     

Phase formation in the system Zn(VO<Subscript>3</Subscript>)<Subscript>2</Subscript>–HCl–VOCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O

The phase and chemical compositions of precipitates formed in the system Zn(VO₃)₂–HCl–VOCl₂–H₂O at pH 1?3, molar ratio V⁴⁺: V⁵⁺ = 0.1?9, and 80°C were studied. It was shown that, within the range 0.4 ≤ V⁴⁺: V⁵⁺ ≤ 9, zinc vanadate with vanadium in a mixed oxidation state forms with the general formula Zn_xV⁴⁺ _yV⁵⁺ _2-yO₅ ? nH₂O (0.005 ≤ x ≤ 0.1, 0.05 ≤ y ≤ 0.3, n = 0.5?1.2). Vanadate Zn_xV₂O₅ ? nH₂O with the maximum tetravalent vanadium content (y = 0.30) was produced within the ratio range V⁴⁺: V⁵⁺ = 1.5?9.0. Investigation of the kinetics of the formation of Zn_xV₂O₅ ? nH₂O at pH 3 determined that tetravalent vanadium ions VO2+ activate the formation of zinc vanadate, and its precipitation is described by a second-order reaction. It was demonstrated that, under hydrothermal conditions at pH 3 and 180°C, zinc decavanadate in the presence of VOCl₂ can be used as a precursor for producing V₃O₇ ? H₂O nanorods 50–100 nm in diameter.