Nano Au enhanced upconversion in dichroic Nd3+:Au–antimony glass nanocomposites

Dichroic Nd³⁺:Au–antimony glass (K₂O–B₂O₃–Sb₂O₃) nanocomposites (NCs) have been synthesized by single-step melt-quench thermochemical reduction process. The UV–Vis–NIR spectra show surface plasmon resonance (SPR) band of Au⁰ nanoparticles (NPs) and absorption peaks of Nd³⁺ ions. XRD and SAED results indicate growth of Au⁰ NPs along (200) plane. TEM image reveals elliptical Au⁰ NPs having sizes 12–21 nm (aspect ratio ～1.2) responsible for the dichroic behavior. Photoluminescent upconversion under excitation at 805 nm exhibit two emission bands of Nd³⁺ ions at 540 (green) and 650 (red) nm due to ⁴G_7/2 → ⁴I_9/2 and ⁴G_7/2 → ⁴I_13/2 transitions respectively. Both bands undergo maximum 8 and 11 fold intensity enhancements respectively at 0.03 wt% Au⁰ (4.1 × 10¹⁸ atoms/cm³). Local field enhancement (LFE) induced by Au⁰ SPR and energy transfer (ET) from Au⁰ → Nd³⁺ is found to be responsible for enhancement while ET from Nd³⁺ → Au⁰ and optical re-absorption due to Au⁰ SPR for quenching.     

Enhanced frequency upconversion of Sm3+ ions by elliptical Au nanoparticles in dichroic Sm3+: Au-antimony glass nanocomposites

Dichroic Sm³⁺: Au-antimony glass nanocomposites are synthesized in a new reducing glass (dielectric) matrix (mol%) K₂O–B₂O₃–Sb₂O₃ (KBS) by a single-step melt-quench technique involving selective thermochemical reduction. X-ray diffraction (XRD) and selected area electron diffraction (SAED) results indicate that Au⁰ nanoparticles are grown along the (2 0 0) plane direction. The transmission electron microscopic (TEM) image reveals the elliptical Au⁰ nanoparticles having major axis range 12–17 nm. Dichroic behavior is due to elliptical shape of Au⁰ nanoparticles of aspect ratio ～1.2. Au⁰ NPs of concentration of 0.03 wt% (4.1 × 10¹⁸ atoms/cm³) drastically enhances the intensity (～7-folds) of electric dipole ⁴G_5/2 → ⁶H_9/2 red transition (636 nm) of Sm³⁺ ions and then attenuates with further increase in Au⁰ concentration. The magnetic dipole ⁴G_5/2 → ⁶H_5/2 green (566 nm) and ⁴G_5/2 → ⁶H_7/2 orange (602 nm) transitions remain almost unaffected by presence of nano Au⁰. Local field enhancement (LFE) induced by Au⁰ SPR and energy transfer (ET) from fluorescent Au⁰ → Sm³⁺ ions are found to be responsible for the enhancement while reverse ET from Sm³⁺ → Au⁰ and optical re-absorption due to Au⁰ SPR for attenuation.     

Photocatalytic activity of Cu2O nanoparticles prepared through novel synthesis method of precursor reduction in the presence of thiosulfate

A novel fabrication of Cu₂O nanoparticles was successfully achieved through the reduction of Cu²⁺ in the interlayer of montmorillonite (denoted as MT). The Cu₂O nanoparticles formed in the clay interlayer (denoted as Cu₂O/MT) had a lamellate shape of 20–100 nm in width and ca. 0.39 nm in thickness, and thus, the Cu₂O/MT exhibited a higher specific surface area than neat Cu₂O. The Cu₂O/MT was applied to a photocatalyst, and its photocatalytic activity was examined in terms of water reduction (i.e., H₂ evolution) in the presence of methanol (electron donor). The Cu₂O/MT showed a high photocatalytic activity in comparison with neat Cu₂O; moreover, the photocatalytic activity was improved by loading a Pt catalyst onto the surface of Cu₂O. Based on the dependencies of photocatalytic activity on light intensity as well as methanol concentration, it was revealed that the H₂ evolution from water on Cu₂O/MT is the rate-determining step. Thus, the active and efficient photocatalysis of Cu₂O/MT was associated with an increase in specific surface area corresponding to the number of active sites.     

A voltammetric study of the binding of copper(II) to peptide fragments of prion

Binding of copper to three peptide fragments of prion (Cu²⁺ binding sites: 60–91, 92–96 and 180–193 amino acid residues) was investigated by anodic stripping voltammetry to determine the stoichiometries of Cu²⁺-prion peptide interactions. The method relies on the synthesis of N-terminally acetylated/C-terminally amidated peptide fragments of prion by solid-phase synthesis and direct monitoring of the oxidation current of copper in the absence and presence of each prion fragment. Titration curves of Cu²⁺ with Ac-PHGGGWGQ-NH₂, Ac-GGGTH-NH₂ and Ac-VNITKQHTVTTTT-NH₂ were obtained in concentrations ranging from 8.52 × 10^?7 to 5.08 × 10^?6, 3.95 × 10^?7 to 1.94 × 10^?6 and 7.82 × 10^?8 to 4.51 × 10^?7 M, respectively. The acquired data were used to calculate the stoichiometries (one peptide per Cu²⁺ ion for all the three studied systems) and apparent dissociation constants (K_d = 4.37 × 10^?8–3.50 × 10^?10 M) for the three complexes.     

CO oxidation over ceria supported Au22 nanoclusters: Shape effect of the support

CO oxidation over ceria-supported Au₂₂ nanoclusters shows strong dependence on the support shape: the lattice oxygen in CeO₂ rods is more reactive than in the cubes and thus make rods a superior support for Au nanoclusters in catalyzing low temperature CO oxidation.     

Luminescence properties of [Ru(bpy)2MDHIP]2+ modulated by the introduction of DNA,copper(II) ion and EDTA

The luminescence properties of [Ru(bpy)₂MDHIP]²⁺ (bpy = 2,2′-bipyridine, MDHIP = 2,4-dihydrophenyl-imidazo[4,5-f][1,10]phenanthroline) in the absence and presence of DNA modulated by the introduction of Cu²⁺ ion and EDTA have been investigated. It is found that the ruthenium(II) complex can insert and stack between the base pairs of calf thymus DNA with MDHIP ligand, and the intramolecular hydrogen bond is located inside of the DNA. The presence of DNA can enhance the luminescence intensities of [Ru(bpy)₂MDHIP]²⁺ both in buffer solution and on an ITO surface. Moreover, the luminescence intensities of [Ru(bpy)₂MDHIP]²⁺ and DNA-bound [Ru(bpy)₂MDHIP]²⁺ are quenched by Cu²⁺, and next recovered by the addition of EDTA. The repetitive luminescence-modulations have been achieved through the introduction of equimolar Cu²⁺ and EDTA, respectively. In addition, it becomes evident that the number of luminescence-modulation cycles for [Ru(bpy)₂MDHIP]²⁺ in the absence and presence of DNA is influenced by the cumulative concentrations of CuEDTA, generated successively by the strong coordination of Cu²⁺ to EDTA.     

Controlled-potential electrosynthesis of glucosaminic acid from glucosamine at a gold electrode

The electrocatalytic oxidation of d-glucosamine (2-amino-2-deoxy-d-glucose) in alkaline and neutral solutions was examined using a carbon felt electrode modified with 2 nm core sized gold nanoparticles (Au_2 nm nanoparticles) and a gold plate electrode. The electrocatalytic voltammetric oxidation curves of d-glucosamine were obtained in both solutions. The voltammetric responses for the electrocatalytic oxidation at a Au_2 nm nanoparticle-modified electrode in both alkaline and neutral solutions were almost the same to those at a gold plate electrode. The oxidized product was identified to be d-glucosaminic acid (2-amino-2-deoxy- d-gluconic acid) generated by the 2-electron oxidation product of d-glucosamine by electrospray ionization time-of-flight mass spectra (ESI TOF-MS). The HPLC results also indicated that the oxidation product was d-glucosaminic acid.The controlled-potential electrolysis of d-glucosamine was performed at the Au_2 nm nanoparticle-modified carbon felt electrodes in both alkaline and neutral solutions. In the alkaline solution, at a potential of −0.2 V, d-glucosaminic acid was formed with a current efficiency of 100%. In the neutral solution, electrolysis at 0.4 V on d-glucosaminic acid was obtained with current efficiencies of 70%.     

Electrochemical and spectral characterization of blue copper protein models

Blue copper proteins play a central role in various enzymatic anabolic/catabolic pathways in living cells by virtue of the integrated metal ions. These ions may exist in variable oxidation states, with suitable reduction potentials and fast electron-transfer rates which in turn is a manifestation of their unusual geometry and co-ordination. We report the electrochemical and spectral characterization of three novel complexes of copper (II) with N₂S type tridentate chelating agent 2,2′-dithiodianiline (dta), having structural similarities to the active site of Type I copper proteins. High positive redox potentials in the range of 0.5–0.6 V vs Ag/AgCl electrode of the complexes and the absorption maxima at ～550 nm, with high extinction coefficients, correspond well with typical blue copper proteins. The IR and EPR studies support the assigned pseudo tetrahedral structures to the complexes. The diffusion coefficient and rate constant for heterogeneous charge transfer for Cu²⁺/Cu⁺ coordinated in a potentially bio-mimetic Type I site is reported.     

Preparation of core-shell magnetic Fe3O4@SiO2-dithiocarbamate nanoparticle and its application for the Ni2+, Cu2+ removal

A typical superparamagnetic nanoparticles-based dithiocarbamate absorbent (Fe₃O₄@SiO₂-DTC) with core-shell structure was applied for aqueous solution heavy metal ions Ni²⁺, Cu²⁺ removal.     

Porous cuprous oxide microcubes for non-enzymatic amperometric hydrogen peroxide and glucose sensing

Using porous cuprous oxide (Cu₂O) microcubes, a simple non-enzymatic amperometric sensor for the detection of H₂O₂ and glucose has been fabricated. Cyclic voltammetry (CV) revealed that porous Cu₂O microcubes exhibited a direct electrocatalytic activity for the reduction of H₂O₂ in phosphate buffer solution and the oxidation of glucose in an alkaline medium. The non-enzymatic amperometric sensor used in the detection of H₂O₂ with detection limit of 1.5 × 10^?6 M over wide linear detection ranges up to 1.5 mM and with a high sensitivity of 50.6 μA/mM. This non-enzymatic voltammetric sensor was further utilized in detection of glucose with a detection limit of 8.0 × 10^?7 M, a linear detection range up to 500 μM and with a sensitivity of ?70.8 μA/mM.     

Influence of redox behavior of copper ions on dielectric and spectroscopic properties of Li2O–MoO3–B2O3: CuO glass system

Li₂O–MoO₃–B₂O₃ glasses mixed with different concentrations of CuO (ranging from 0 to 1.2 mol%) were prepared. The samples were characterized by X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. Optical absorption, luminescence, ESR, IR and dielectric properties (viz., dielectric constant ?′, loss tan δ and a.c. conductivity σ_ac, over a wide range of frequency and temperature) of these glass materials have been investigated. The results of differential scanning calorimetric studies suggest that the glass forming ability is higher for the glasses containing CuO beyond 0.6 mol%. The analysis of results of the dielectric properties has revealed that the glasses possess high insulating strength when the concentration of CuO is >0.6 mol%. The variation of a.c. conductivity with the concentration of CuO passes through a maximum at 0.6 mol%. In the high-temperature region, the a.c. conduction seems to be connected with the mixed conduction viz., electronic conduction and ionic conduction. The optical absorption spectra of these glasses exhibited bands due to Cu⁺ ions in the UV region in addition to the conventional band due to Cu²⁺ ions in the visible region. The ESR spectral studies have indicated that there is a gradual adoption of Cu²⁺ ions from ionic environment to covalent environment as the concentration of CuO increases beyond 0.6 mol% in the glass matrix. The luminescence spectra excited at 271 nm have exhibited an intense yellow emission band centered at about 550 nm and a relatively broad blue emission band at about 450 nm; these bands have been attributed to the ³D₁ → ¹S₀ transition of isolated Cu⁺ ions and ³D₁ → ¹S₀ transition of (Cu⁺)₂ pairs, respectively. The quantitative analysis of the results of all these studies has indicated that as the concentration of CuO is increased beyond 0.6 mol% in the glass matrix, a part of Cu²⁺ ions have been reduced to Cu⁺ ions that have influenced the physical properties of these glasses to a substantial extent.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

Non-metallic gold nanoclusters for oxygen activation and aerobic oxidation

In this review, oxygen activation and their aerobic oxidation over the Au nanoclusters are presented. The size-specificity, ligand engineering, and doping effects and the proposed reactions’ mechanism and the structure-activity relationships at the atomic level are also discussed.     

Improved electrochemical performances of core-shell Cu2O/Cu composite prepared by a simple one-step method

Core-shell Cu₂O/Cu composites were successfully prepared by over-reduction of aqueous CuSO₄ with hydrazine hydrate as reductant. Field emission scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) clearly illuminate that the core is Cu₂O with 400 nm in diameter, and the shell is Cu with about 50 nm in thickness. The core-shell Cu₂O/Cu exhibited weaker polarization and higher coulombic efficiency than pure octahedral Cu₂O, especially in the initial stage of cycles. After 50 cycles, the reversible capacity of Cu₂O/Cu (360 mAh g^?1) was much higher than that of pure Cu₂O (160 mAh g^?1). The improvement of electrochemical properties is attributed to the core-shell structure of Cu₂O/Cu and the catalytic effect of Cu on the decomposition of Li₂O during the charging process.     

Dual role of the six-coordinated molybdenum and lead ions in novel of photochromic properties of the molybdenum–lead–borate glasses

Transparent glasses were prepared by conventional melting–quenching method in the xMoO₃·(100 ? x)[3B₂O₃·PbO] system where 0 ≤ x ≤ 15 mol%. By increasing the MoO₃ content up to 20 mol% the PbMoO₄ crystalline phase appears. These systems exhibit a photochromic effect which can be induced through laser exposures (λ = 633 nm) directly on the bulk sample. Structural investigations by FTIR spectroscopy show that the photosensitive effect is due to a reduction of Mo⁶⁺ to Mo⁴⁺ and/or Mo⁵⁺ promoted by the oxidation of Pb²⁺ and some structural changes of the borate network.     

Spectral and physico-chemical investigations of novel homo-dinuclear di-μ2-alkoxo bridged Schiff base complexes: 57Fe Mössbauer parameters of the Fe(III) complex

Spectral and molecular model computations on homo-dinuclear complexes [M₂L₂(H₂O)₂Cl₂] [L = 1-(salicylaldeneamino)-3-hydroxypropane, M = Cr³⁺, Mn³⁺, Fe³⁺, Co³⁺, Ni³⁺ or Cu³⁺] are consistent with a distorted hexa-coordinate geometry. X-band EPR spectral data indicated a rhombic distortion around Cu(II) ion. Magnetic moment and ⁵⁷Fe Mössbauer data confirmed a high-spin state electronic configuration (t_2g³e_g², S = 5/2) and asymmetric ligand environment around Fe(III) with nuclear transitions Fe(±3/2 → 1/2) exhibiting Kramer's double degeneracy. The neighboring Fe(III) nuclei in the homo-dinuclear species are antiferromagnetically coupled.     

Synthesis of alginate stabilized gold nanoparticles by γ-irradiation with controllable size using different Au3+ concentration and seed particles enlargement

Gold nanoparticles with pre-selected size in the range 5–40 nm were synthesized by γ-irradiation of Au³⁺ solution containing natural polysaccharide alginate as a stabilizer. The gold nanoparticles with controllable size were prepared by two approaches: (i) varying the concentration of Au³⁺ from 0.25 to 1 mM and alginate from 0.25% to 1% (w/v) and (ii) enlargement of seed particles with double size from 20 to 40 nm at [Au³⁺]/[Au⁰]=6. The obtained gold nanoparticles were characterized by UV–vis spectroscopy and transmission electron microscopy. The results indicated that γ-irradiation method is suitable for production of gold nanoparticles with controllable size and high purity.     

An enzymatic glucose/O2 biofuel cell: Preparation,characterization and performance in serum

This study demonstrates a new kind of single-walled carbon nanotubes (SWNT)-based compartment-less glucose/O₂ biofuel cell (BFC) with glucose dehydrogenase (GDH) and bilirubin oxidase (BOD) as the anodic and cathodic biocatalysts, respectively, and with poly(brilliant creysl blue) (BCB) adsorbed onto SWNT nanocomposite as the electrocatalyst for the oxidation of NADH. The prepared GDH-polyBCB-SWNT bioanode exhibits an excellent electrocatalytic activity toward the oxidation of glucose biofuel; in 0.10 M phosphate buffer containing 20 mM NAD⁺ and 100 mM glucose, the oxidation of glucose commences at −0.25 V and the current reaches its maximum of 310 μA/cm² at −0.05 V vs. Ag/AgCl. At the BOD-SWNT biocathode, a high potential output is achieved for the reduction of O₂ due to the direct electron transfer property of BOD at the SWNTs. In 0.10 M phosphate buffer, the electrocatalytic reduction of O₂ is observed at a high potential of 0.53 V vs. Ag/AgCl with an electrocatalytic current plateau of ca. 28 μA/cm² at 0.45 V under ambient air and ca. 102 μA/cm² under O₂-saturated atmosphere. In 0.10 M phosphate buffer containing 10 mM NAD⁺ and 40 mM glucose under O₂-saturated atmosphere, the power density of the assembled SWNT-based glucose/O₂ BFC reaches 53.9 μW/cm² at 0.50 V. The performance and the stability of the glucose/O₂ BFC are also evaluated in serum. This study could offer a new route to the development of new kinds of enzymatic BFCs with a high performance and provide useful information on future studies on the enzymatic BFCs as in vivo power sources.     

Electrodeposition of CuInSe2 films by an alternating double-potentiostatic method using nearly neutral electrolytes

One step electrodeposition with an alternating double-potentiostatic(DPSED) program was used to prepare CuInSe₂ thin films in nearly neutral aqueous electrolytes with sodium citrate complex. Linear sweep voltammetry(LSV) was measured to probe voltammetric properties of electrolytes with respect to Cu, In and Se individual precursor and their mixed solutions. Compositional and structural characteristics of the as-deposited and annealed films at 400 °C in Ar atmosphere for 0.5 h were analyzed by XRD and XPS. The results showed that reduction of Cu²⁺ to Cu⁺ at one potential point of ?800 mV and subsequently formation of CuIn alloy as well as metal In and amorphous Se at the other potential point of ?1400 mV were responsible for synthesis of CISe chalcopyrite. Composition self-regulation made DPSED films have three elements co-deposition and more uniform element distribution, which promoted chalcopyrite CISe formation.     

Synthesis,physico-chemical and spectral investigations of novel homo-bimetallic mixed-ligand complexes: 57Fe Mössbauer parameters of [Fe2(imda)2(H2O)3Cl]

The newly prepared homo-bimetallic complexes [M₂(imda)₂(H₂O)₄], [M₂(imda)₂(Bipy)₂] (M = Co, Ni or Cu) and [Fe₂(imda)₂(H₂O)₃Cl] (H₂imda = iminodiacetic acid and Bipy = 2,2′-bipyridine) have been studied employing IR, FAB-mass, ¹H and ¹³C NMR, EPR and ligand field spectra, which indicated a high-spin state of metal ion with hexa-coordinate environment. ⁵⁷Fe Mössbauer data of the homo-bimetallic complex [Fe₂(imda)₂(H₂O)₃Cl] confirm a high-spin configuration with Fe (±3/2 → 1/2) nuclear transitions and the presence of Kramer's double degeneracy. At RT, the spin–spin interactions of the neighbouring nuclei (Fe³⁺–Fe³⁺ = S_5/2–S_5/2) are anti-ferromagnetically coupled. However, at LNT, the complex acquires a mixed-valent [Fe^III–Fe^II] composition corroborated from the X-band EPR data. CV studies indicated the presence of quasi-reversible redox Cu^II/I, Cu^II/III, Fe^III/II, Fe^III/I and Fe^II/I couples.