Is the μ‐Oxo‐μ‐Peroxodiiron Intermediate of a Ribonucleotide Reductase Biomimetic a Possible Oxidant of Epoxidation Reactions?

Density functional calculations on a mu-oxo-mu-peroxodiiron complex (1) with a tetrapodal ligand BPP (BPP=N,N-bis(2-pyridylmethyl)-3-aminopropionate) are presented that is a biomimetic of the active site region of ribonucleotide reductase (RNR). We have studied all low-lying electronic states and show that it has close-lying broken-shell singlet and undecaplet (S=0, 5) ground states with essentially two sextet spin iron atoms. In strongly distorted electronic systems in which the two iron atoms have different spin states, the peroxo group moves considerably out of the plane of the mu-oxodiiron group due to orbital rearrangements. The calculated absorption spectra of (1,11)1 are in good agreement with experimental studies on biomimetics and RNR enzyme systems. Moreover, vibrational shifts in the spectrum due to (18)O(2) substitution of the oxygen atoms in the peroxo group follow similar trends as experimental observations. To identify whether the mu-oxo-mu-1,2-peroxodiiron or the mu-oxo-mu-1,1-peroxodiiron complexes are able to epoxidize substrates, we studied the reactivity patterns versus propene. Generally, the reactions are stepwise via radical intermediates and proceed by two-state reactivity patterns on competing singlet and undecaplet spin state surfaces. However, both the mu-oxo-mu-1,2-peroxodiiron and mu-oxo-mu-1,1-peroxodiiron complex are sluggish oxidants with high epoxidation barriers. The epoxidation barriers for the mu-oxo-mu-1,1-peroxodiiron complex are significantly lower than the ones for the mu-oxo-mu-1,2-peroxodiiron complex but still are too high to be considered for catalytic properties. Thus, theory has ruled out two possible peroxodiiron catalysts as oxidants in RNR enzymes and biomimetics and the quest to find the actual oxidant in the enzyme mechanism continues.     

A Facile Synthesis of a Wide Variety of Cationic Ruthenium Hydrido‐Arene Complexes of binap (=1,1′‐Binaphthalene‐2,2′‐diylbis(diphenylphosphane)) and MeO?biphep (=6,6′‐Dimethoxybiphenyl‐2,2′‐diylbis(diphenylphosphane))

A straightforward high‐yield synthetic route to the cationic hydrido‐arene complexes [RuH(η⁶‐arene)(binap or MeO biphep)](CF₃SO₃), with a variety of arenes containing both donor and acceptor substituents, is described. ¹³C‐NMR Data for these complexes are reported. Several of these Ru‐complexes have been used as transfer‐hydrogenation catalysts in the reduction of acetophenone.     

A Straightforward Synthesis of 2‐[1‐Alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic Acid Derivatives via Domino Michael Addition?Cyclization Reaction

A new and efficient synthesis of 2‐[1‐alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic acid derivatives by a one‐pot three‐component reaction between primary amine, dialkyl acetylenedicarboxylate, and itaconic anhydride (=3,4‐dihydro‐3‐methylidenefuran‐2,5‐dione) is reported. The reaction was performed without catalyst and under solvent‐free conditions with excellent yields. Notably, the ready availability of the starting materials, and the high level of practicability of the reaction and workup make this approach an attractive complementary method to access to unknown 2‐[1‐alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic acid derivatives. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of domino Michael addition? cyclization reaction is proposed (Scheme 2).     

C?C Cross‐Coupling Reactions of O6‐Alkyl‐2‐Haloinosine Derivatives and a One‐Pot Cross‐Coupling/O6‐Deprotection Procedure

Reaction conditions for the C? C cross‐coupling of O⁶‐alkyl‐2‐bromo‐ and 2‐chloroinosine derivatives with aryl‐, hetaryl‐, and alkylboronic acids were studied. Optimization experiments with silyl‐protected 2‐bromo‐O⁶‐methylinosine led to the identification of [PdCl₂(dcpf)]/K₃PO₄ in 1,4‐dioxane as the best conditions for these reactions (dcpf=1,1′‐bis(dicyclohexylphosphino)ferrocene). Attempted O⁶‐demethylation, as well as the replacement of the C‐6 methoxy group by amines, was unsuccessful, which led to the consideration of Pd‐cleavable groups such that C? C cross‐coupling and O⁶‐deprotection could be accomplished in a single step. Thus, inosine 2‐chloro‐O⁶‐allylinosine was chosen as the substrate and, after re‐evaluation of the cross‐coupling conditions with 2‐chloro‐O⁶‐methylinosine as a model substrate, one‐step C? C cross‐coupling/deprotection reactions were performed with the O⁶‐allyl analogue. These reactions are the first such examples of a one‐pot procedure for the modification and deprotection of purine nucleosides under C? C cross‐coupling conditions.     

Enantioselective Palladium‐Catalyzed Insertion of α‐Aryl‐α‐diazoacetates into the O?H Bonds of Phenols

A palladium‐catalyzed asymmetric O H insertion reaction was developed. Palladium complexes with chiral spiro bisoxazoline ligands promoted the insertion of α‐aryl‐α‐diazoacetates into the O H bond of phenols with high yield and excellent enantioselectivity under mild reaction conditions. This palladium‐catalyzed asymmetric O H insertion reaction provided an efficient and highly enantioselective method for the preparation of synthetically useful optically active α‐aryl‐α‐aryloxyacetates.     

Removal and Recovery of UO2(??) from Water Samples Using 2,2′‐Diamino‐4,4′‐bithiazole as a New Reagent for Solid Phase Extraction

A novel sensitive and simple method for rapid and selective extraction, preconcentration and determination of uranyl as its 2,2′‐diamino‐4,4′‐bithiazole (DABTZ) complex by using octadecylsilica columns and spectrophotometry is presented. Extraction efficiency and the influence of flow rates of sample solution and eluent, pH, amount of DABTZ, type and least amount of eluent for elution of uranyl complex from columns, break‐through volume and limit of detection were evaluated. Also the effects of various cationic and anionic interferences on percent recovery of uranyl were studied. Average extraction efficiency of ca. 90% was obtained by elution of the column with minimal amount of solvent in the presence of interferences. The average preconcentration factor, 136 and a detection limit 0.32 ng·mL^?1 were obtained. The method was applied to the recovery and determination of uranyl in different water samples.     

Acid?Base Properties of Adenosine 5′‐Monophosphate,Guanosine 5′‐Monophosphate,and Inosine 5′‐Monophosphate in Aqueous Solutions of Methanol

The protonation constants of adenosine 5′‐monophosphate, guanosine 5′‐monophosphate, and inosine 5′‐monophosphate were determined in binary mixtures of H₂O containing 0, 10, 15, 20, 25, 30, 35, 40, 45, and 50% MeOH, using a combination of potentiometric and spectrophotometric methods at a constant temperature (25°) and constant ionic strength (0.1 mol?dm^?3 NaClO₄). The protonation constants were analyzed using the normalized polarity parameter (E ), and Kamlet, Abboud, and Taft (KAT) parameters. A linear correlation of log K vs. the normalized polarity parameter was obtained. Dual‐parameter correlation of log K vs. π* (dipolarity/polarizability) and α (H‐bond‐donor acidity), as well as π* and β (H‐bond‐acceptor basicity) also gives good results in various aqueous organic solvent mixtures. Finally, the results are discussed in terms of the effect of solvent on the protonation equilibria.     

In Search of Organic Zeolites – Does Modern Information Retrieval Inevitably Become a ‘Sieving‐the‐Desert' Exercise?

Information retrieval for planning and executing research projects and for publishing results is considered a routine task that is usually neither mentioned explicitly in a scientific publication nor described in any detail. In the information searches for the preceding publication (‘Building an Organic Zeolite from a Macrocyclic TADDOL Derivative or How to Teach an Old Dog New Tricks'), we were confronted with so many problems during retrieval of the desired information about related work that we decided to deviate from this tradition. We had to use the Cambridge Structural Database, the Chemical Abstracts structure and literature databases, and the Beilstein database to the full extent of their contents, indexing, and search facilities to retrieve the necessary information about ‘organic zeolites'. In the process, we found important limitations and deficiencies in any one of these databases, and we had to conceive search procedures that we considered rather unusual even after more than 20 years of experience in searching chemistry databases. The results and, particularly, the problems encountered underline the necessity for enhanced integration of individual compound and property databases and improved standardization as a prerequisite for this.     

Use of LC–HRMS in full scan‐XIC mode for multi‐analyte urine drug testing – a step towards a ‘black‐box’ solution?

The influx of new psychoactive substances (NPS) has created a need for improved methods for drug testing in toxicology laboratories. The aim of this work was to design, validate and apply a multi‐analyte liquid chromatography–high‐resolution mass spectrometry (LC–HRMS) method for screening of 148 target analytes belonging to the NPS class, plant alkaloids and new psychoactive therapeutic drugs. The analytical method used a fivefold dilution of urine with nine deuterated internal standards and injection of 2 μl. The LC system involved a 2.0 μm 100 × 2.0 mm YMC‐UltraHT Hydrosphere‐C₁₈ column and gradient elution with a flow rate of 0.5 ml/min and a total analysis time of 6.0 min. Solvent A consisted of 10 mmol/l ammonium formate and 0.005% formic acid, pH 4.8, and Solvent B was methanol with 10 mmol/l ammonium formate and 0.005% formic acid. The HRMS (Q Exactive, Thermo Scientific) used a heated electrospray interface and was operated in positive mode with 70 000 resolution. The scan range was 100–650 Da, and data for extracted ion chromatograms used ± 10 ppm tolerance. Product ion monitoring was applied for confirmation analysis and for some selected analytes also for screening. Method validation demonstrated limited influence from urine matrix, linear response within the measuring range (typically 0.1–1.0 μg/ml) and acceptable imprecision in quantification (CV <15%). A few analytes were found to be unstable in urine upon storage. The method was successfully applied for routine drug testing of 17 936 unknown samples, of which 2715 (15%) contained 52 of the 148 analytes. It is concluded that the method design based on simple dilution of urine and using LC–HRMS in extracted ion chromatogram mode may offer an analytical system for urine drug testing that fulfils the requirement of a ‘black box’ solution and can replace immunochemical screening applied on autoanalyzers. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis of Perfluoroalkyl‐Substituted γ‐Lactones and 4,5‐Dihydropyridazin‐3(2H)‐ones via Donor?Acceptor Cyclopropanes

Rh₂(OAc)₄‐Catalyzed decomposition of diazo esters in the presence of perfluoroalkyl‐ or perfluoroaryl‐substituted silyl enol ethers smoothly provided the corresponding alkyl 2‐siloxycyclopropanecarboxylates in very good yields. The generated donor? acceptor cyclopropanes are equivalents of γ‐oxo esters, which we demonstrated by their one‐pot transformations to yield fluorine‐containing heterocycles. A reductive procedure selectively afforded perfluoroalkyl‐substituted γ‐hydroxy esters or γ‐lactones. The treatment of the donor? acceptor cyclopropanes with hydrazine or phenylhydrazine afforded a series of perfluoroalkyl‐ and perfluoroaryl‐substituted 4,5‐dihydropyridazin‐3(2H)‐ones.     

Microwave Accelerated Polymerization of 2‐Phenyl‐2‐oxazoline: Microwave or Temperature Effects?

Summary: Investigations regarding the cationic ring‐opening polymerization of 2‐phenyl‐2‐oxazoline under microwave irradiation and conventional heating are reported. This study was inspired by contradictory reports of the (non‐)existence of non‐thermal microwave effects that might accelerate the cationic ring‐opening of 2‐oxazolines. The polymerization of 2‐phenyl‐2‐oxazoline was investigated under pressure in acetonitrile and under reflux (or at the boiling point of butyronitrile in a closed vessel) in butyronitrile utilizing a single‐mode microwave reactor and automated synthesis robots with conventional heating.

     

Redox‐Triggered C?C Coupling of Diols and Alkynes: Synthesis of β,γ‐Unsaturated α‐Hydroxyketones and Furans by Ruthenium‐Catalyzed Hydrohydroxyalkylation

Direct ruthenium‐catalyzed C C coupling of alkynes and vicinal diols to form β,γ‐unsaturated ketones occurs with complete levels of regioselectivity and good to complete control over the alkene geometry. Exposure of the reaction products to substoichiometric quantities of p‐toluenesulfonic acid induces cyclodehydration to form tetrasubstituted furans. These alkyne‐diol hydrohydroxyalkylations contribute to a growing body of merged redox‐construction events that bypass the use of premetalated reagents and, hence, stoichiometric quantities of metallic by‐products.     

Protonation of a Biologically Relevant CuII μ‐Thiolate Complex: Ligand Dissociation or Formation of a Protonated CuI Disulfide Species?

The proton‐induced electron‐transfer reaction of a Cu^II μ‐thiolate complex to a Cu^I‐containing species has been investigated, both experimentally and computationally. The Cu^II μ‐thiolate complex [Cu^II₂( L^MeS )₂]²⁺ is isolated with the new pyridyl‐containing ligand L^MeSSL^Me , which can form both Cu^II thiolate and Cu^I disulfide complexes, depending on the solvent. Both the Cu^II and the Cu^I complexes show reactivity upon addition of protons. The multivalent tetranuclear complex [Cu^I₂Cu^II₂( LS )₂(CH₃CN)₆]⁴⁺ crystallizes after addition of two equivalents of strong acid to a solution containing the μ‐thiolate complex [Cu^II₂( LS )₂]²⁺ and is further analyzed in solution. This study shows that, upon addition of protons to the Cu^II thiolate compound, the ligand dissociates from the copper centers, in contrast to an earlier report describing redox isomerization to a Cu^I disulfide species that is protonated at the pyridyl moieties. Computational studies of the protonated Cu^II μ‐thiolate and Cu^I disulfide species with LSSL show that already upon addition of two equivalents of protons, ligand dissociation forming [Cu^I(CH₃CN)₄]⁺ and protonated ligand is energetically favored over conversion to a protonated Cu^I disulfide complex.