Development of wood protective polyurethane coatings from mahua oil-based polyetheramide polyol: a renewable approach

The present work reports the preparation of wood protective polyurethane (PU) from mahua oil-based polyetheramide polyol and its performance evaluation. The synthesis of polyetheramide polyol was carried out in two steps: the first step deals with the synthesis of mahua oil fatty amide (MFA) from mahua oil by base catalyzed aminolysis reaction and the second step deals with the synthesis of polyetheramide polyol from diglycidyl ether of bisphenol-A (DGEBA) and MFA. The structure of the synthesized polyetheramide polyol was confirmed by the Attenuated total reflection fourier transform infrared (ATR-FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The synthesized polyetheramide polyol was used as a precursor for the wood protective PU coatings. The performance of the prepared wood protective PU coatings was evaluated by the measurements of the various performance properties. The results reveal that mechanical, thermal, and microbial properties of the prepared PUs are satisfactory compared to other literature reported vegetable oil-based PUs; whereas, water, solvent, and chemical resistance of the prepared PUs are quite good. The study concludes that mahua oil-based polyetheramide polyol is a suitable precursor for the preparation of wood protective PU.     

Corn oil based poly(urethane-ether-amide)/fumed silica nanocomposite coatings for anticorrosion application

Poly(urethane-ether-amide) (PUIEtA) nanocomposite coatings on mild steel were prepared by using corn oil, isosorbide and isophorone diisocynate and fumed silica. The syntheses steps were confirmed by FTIR, ¹H NMR and ¹³C NMR spectroscopy techniques. The morphology of PUIEtA nanocomposite coating was studied by SEM-EDX, that confirmed the presence of nanosilica and thermal behavior was studied by DSC/TGA analysis. The anticorrosion performance of PUIEtA coating systems on mild steel, exposed to 3.5?wt% NaCl solution, was evaluated using electrochemical impedance spectroscopy. Scratch hardness, pencil hardness, adhesion, and bending test were performed in order to investigate the performance of nanocomposite coating on mild steel substrate. It was found that PUIEtA-fumed silica nanocomposite coating could provide much better protection than PUIEtA. PUIEtA-3 nanocomposite coating can be safely used up to 200?°C.     

Studies on Melamine Modified Polyesteramide as Anticorrosive Coatings from Linseed Oil: A Sustainable Resource

Melamine modified polyester amide (MPEA) was synthesized by the reaction of linseed oil fatty amide. The resin was further cured at room temperature by polystyrene co‐maleic anhydride (SMA) in different phr (30–80) to obtain MPEA coatings. The probable structure of MPEA was confirmed by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The physico‐chemical characterization of these resins viz. iodine value, saponification value, refractive index, inherent viscosity were carried out by standard methods. MPEA (40 wt%) solution in ethylene glycol monomethyl ether (EGME) was applied on a mild steel strip of standard sizes to study their physico‐mechanical and chemical resistance properties. It was found that coatings of MPEA with 60 parts per hundred of the resin (phr) of SMA showed the best performance in physico‐mechanical and alkali resistance properties. Thermal stability and curing behavior were studied by Thermo Gravimetric Analyses (TGA) and Differential Scanning Calorimetry (DSC), respectively.     

Polyimide–silica hybrid coatings: morphological,mechanical, and thermal investigations

In this study, polyimide–silica (PI–silica) based hybrid coating compositions were prepared from tetraethoxysilane (TEOS), γ‐glycidyloxypropyl trimethoxy silane (GOTMS), and polyamic acid (PAA) via a combination of sol–gel and thermal imidization techniques. PAA was synthesized from 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) and 3,3'‐Diaminodiphenyl sulfone (DDS) in N‐Methyl‐2‐pyrrolidone (NMP). The silica content in the hybrid coatings was varied from 0 to 20 wt%. The structural characterization of the hybrid coatings was performed using FTIR and ²⁹Si‐NMR spectroscopies. Results from both pendulum hardness and micro indentation test show that the hardness of hybrid coatings improves with the increase in silica content. The tensile tests also demonstrated that the mechanical properties at low silica content are rather striking. Their surface morphologies were characterized by scanning electron microscopy (SEM). SEM studies revealed that inorganic particles were distributed homogenously through the PI matrix. It was also found that, incorporation of the silica domains increased the thermal stability of the hybrid coatings. Copyright © 2007 John Wiley & Sons, Ltd.     

Development of poly(ε-caprolactone-co-l-lactide) and poly(ε-caprolactone-co-δ-valerolactone) as new degradable binder used for antifouling paint

Copolyesters containing ε-caprolactone and l-lactide or ε-caprolactone and δ-valerolactone at different compositions were synthesized by using tetrabutoxytitane Ti(OBu)₄ at high temperature in bulk. A series of copolyesters were prepared by varying the compositions of both comonomers. These copolymers were characterized by using ¹H NMR, ¹³C NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and MALDI-TOF mass spectrometry. ¹³C NMR analysis gave an insight on their microstructure. Structural parameters of the copolymers were obtained by calculating the triad sequence fractions. Poly(ε-caprolactone-co-l-lactide) has a more alternate structure than poly(ε-caprolactone-co-δ-valerolactone). The potential use of these copolyesters in antifouling coatings was examined because of their solubility in aromatic solvent and their hydration and hydrolytic degradation. Paints based on these new degradable binders had a good antifouling activity in Atlantic Ocean (France).     

Synthesis and biodegradation studies of 1,3-propanediol based aliphatic poly(ester carbonate)s

A series of poly(ester carbonate)s were obtained from adipic acid, 1,3-propanediol and diethyl carbonate in the presence of catalyst Ti(OBu)₄ by polycondensation and transestrification process. The amount of monomeric composition was varied in order to get the polymer of different composition. The structure, average molecular weight and physical properties of poly(ester carbonate) were characterized by FT-IR, ¹H NMR, solubility, solution viscosity, gel permeation chromatography, differential scanning calorimetry and XRD analysis. Biodegradability of poly(ester carbonate)s was investigated by hydrolytic (pH 7.2 and 11.5), enzymatic using Rhizopus delemar lipase at 37 °C and soil burial test. The biodegradation rate observed was more for poly(ester carbonate) containing 40% and 10% of diethyl carbonate due to their low crystallinity.     

Synthesis and polymerization reactions of cyclic imino ethers. 5: naphthalene unit‐containing poly(ether amide)s

Poly(ether amide)s containing naphthalene unit were prepared either by the polyaddition reaction of aromatic bis(2‐oxazoline)s with the different dihydroxynaphthalenes or by the homopolyaddition of a monomer containing an oxazoline, a hydroxy, and naphthalene moieties. First, polymerization method represents AA + BB mode where 1,4‐phenylene‐2,2′‐bis(2‐oxazoline) (A) and 1,3‐phenylene‐2,2′‐bis(2‐oxazoline) (B) were used as AA monomers and four different dihydroxynaphthalenes 1–4 were used as BB monomers. In the second case, 2‐(6‐hydroxynaphthalene‐2‐yl)‐2‐oxazoline (5) was used as AB‐type monomer in thermally induced polymerizations. The time dependences of polyadditions in bulk as well as in the solution were examined. The reduction of molar mass was observed after the initial fast increase of molar mass. This can be explained by the presence of side and degradation reactions. In both cases, polyadditions resulted in the linear poly(ether amide)s, which were characterized by ¹H and ¹³C NMR spectroscopy. Thermal properties of the prepared polymers were studied by differential scanning calorimetry (DSC) measurements. Comparison of the temperatures of glass transition for polymers prepared in AA + BB mode shows the strong dependence of thermal properties on the structure of the polymers. The values were in the range of 136–171°C. The glass‐transition temperature (T_g) of poly[2‐(6‐hydroxynaphthalene‐2‐yl)‐2‐oxazoline] prepared by AB‐type polyaddition is 183°C, which corresponds to the higher contents of hard aromatic segments in the latter type of polymers compared to the polymers prepared in the AA + BB‐type polyadditions. The described polymers represent novel naphthalene unit‐containing poly(ether amide)s for different applications in material science. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal and neutron shielding properties of 10B containing UV cured hybrid coatings

¹⁰B containing organic–inorganic hybrid coating material based on a UV-curable formulation was prepared via anhydrous sol–gel technique. UV curable coatings were applied on Plexiglas (PMMA) substrates. The molecular structure of the coating material was analyzed by ATR-FTIR spectroscopy technique. The characterization of the UV-curable coating was evaluated by various techniques such as gel content, abrasion resistance, chemical resistance, pencil hardness, pendulum hardness, MEK rubbing test, contact angle, cross-cut test, gloss, transmittance test, neutron absorption, Limiting Oxygen Index and stress–strain tests. Hybrid coatings showed a significant enhancement in radiation shielding properties. The thermal behavior of coatings was also evaluated. It is observed that the thermal stability of coatings mainly depends on their boron and silicate contents. Results of all analysis conducted on hybrid films, and coatings were discussed.     

Synthesis and characterization of new poly(ether amide)s based on a new cardo monomer

A new cardo diamine monomer 3, 3‐bis‐[4‐{2′trifluoromethyl 4′‐(4″‐aminophenyl) phenoxy} phenyl]‐2‐phenyl‐2, 3‐dihydro‐isoindole‐1‐one ( 4 ) has been synthesized from potentially cheap phenolphthalein as the starting material. This diamine was used for the synthesis of a new poly(ether amide) and two co‐poly(ether amide)s using 4, 4′‐diaminodiphenyl ether (ODA) as co‐monomer by direct solution polycondensation with 5‐t‐butyl iso‐phthalic acid. These new polymers showed inherent viscosities of 0.48–0.62 dL g^?1. The resulting poly(ether amide) and co‐poly(ether amide)s were readily soluble in polar aprotic solvents like NMP, DMF, DMAc, DMSO, and pyridine. The polymers have been fully characterized by ¹H and ¹³C NMR, FTIR spectroscopy, and elemental analysis. These polymers showed glass transition temperatures in the range of 267–310°C. Thermogravimetric analysis indicated high thermal stability of these polymers at 5 and 10% weight loss temperature in air above 357°C and 419°C, respectively. The poly(ether amide) films cast from DMAc were flexible with tensile strength up to 91 MPa, elongations at break up to 11%, and modulus of elasticity up to 1.82 GPa. X‐ray diffraction measurements indicate the amorphous nature of the poly(ether amide)s. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and characterization of thermally stable poly(amide‐urea)s functionalized with anthraquinone chromophore

Two new diamines containing bulky anthraquinone pendant units were prepared via reactions of 1‐ and 2‐aminoanthraquinone with 3,5‐dinitrobenzoylchloride and a subsequent reduction of their nitro groups. A novel series of highly organosoluble poly(amide‐urea)s were synthesized from the reactions of the prepared diamines with various commercially available diisocyanates via a step‐growth addition reaction process in N‐methyl‐2‐pyrrolidone (NMP). The effects of two factors (time and temperature) on the reaction were studied to optimize the conditions for the preparation of high molecular weight polymers. All poly(amide‐urea)s were characterized by Fourier Transform Infrared (FTIR) and ¹H‐nuclear magnetic resonance (NMR) spectroscopies and elemental analysis. The resulting poly(amide‐urea)s had inherent viscosities in the range of 0.54–0.73 dl/g. They exhibited excellent solubility in polar solvents. The temperature for 10% weight loss of the polymers in air was all above 285°C, their residues were more than 36% at 700°C in air, and their T_g values were in the range of 148–190°C. According to the wide‐angle X‐ray diffraction (WAXD), the polymers were almost amorphous. The optical properties of poly(amide‐urea)s measured by ultraviolet–visible (UV–Vis) spectroscopy showed absorption maxima at 303–429 nm. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and hydrolytic degradation of stereoregular aromatic poly(ester amide)s derived from D‐xylose

Stereoregular poly(ester amide)s (PEAs) were prepared by the polycondensation method using naturally occurring D ‐xylose and aromatic diacids as the starting materials. The polymers were characterized by elemental analysis, GPC, IR, and ¹H‐ and ¹³C NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be mainly amorphous. The polymers are hydrophilic and their degradation studies were carried out at 37 and 80 °C in buffered salt solution at pH 8. The degradation study was monitored by mass loss, GPC, IR, and NMR spectroscopies. The hydrolytic degradation of these PEAs occurred rapidly by hydrolysis of the ester functions to a final compound, which maintained the amide functions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

One‐pot synthesis and characterization of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids and multihydroxyl secondary amines

A convenient and cost‐effective strategy for synthesis of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids (A₂) and multihydroxyl secondary amine (CB₂) has been developed. By optimizing the conditions of model reactions, the AB₂‐type intermediates were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to thermal polycondensation in the absence of any catalyst to prepare the aliphatic and semiaromatic hyperbranched poly(ester‐amide)s bearing multi‐hydroxyl end‐groups. The FTIR and ¹H NMR spectra indicated that the polymerization proceeded in the proposed way. The DBs of the resulting polymers were confirmed by a combination of inverse‐gated decoupling ¹³C NMR, and DEPT‐135 NMR techniques. The DBs of the hyperbranched poly(ester‐amide)s were in the range of 0.44–0.73, depending on the structure of the monomers used. The hyperbranched polymers exhibited moderate molecular weights with relatively broad distributions determined by SEC. All the polymers displayed low inherent viscosity (0.11–0.25 dL/g) due to the branched nature. Structural and end‐group effects on the thermal properties of the hyperbranched polymers were investigated using DSC. The thermogravimetric analysis revealed that the resulting polymers exhibit reasonable thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5077–5092, 2008     

Properties and Structures of Terephthalyl Chloride (TPC) Modified meta‐Aramid Copolymers

The properties and structures of terephthalyl chloride (TPC) modified poly(m‐phenylene isophthalamide) (PMIA) with TPC mole content in acylchloride from 5%–15% were studied in this paper. The composition and structure of the copolymer were determined by ¹H NMR. The content of TPC moiety in the molecular chain was calculated. Thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) were used to analysis the thermal properties of TPC modified PMIA copolymer. The results show that by introducing TPC units in the PMIA molecular chain, PMIA copolymers with better thermal properties were prepared. With the increase of TPC content, the TPC modified PMIA exhibit increasing thermal stability. The pyrolysis process of the copolymer was detected by FTIR spectra. When the copolymers were pyrolyzed to 500°C, an aryl nitrile band at 2230 cm^?1 appears in the FTIR spectrum. This means that at this temperature breakage of the amide bond occurred.     

Polysilazane as the source of silica: the formation of dense silica coatings at room temperature and the new route to organic–inorganic hybrids

Xylene solutions of perhydropolysilazane (PHPS) were used as the coating solutions for preparing silica coatings at room temperature. The PHPS-to-silica conversion was achieved by exposing the spin-on coatings to the vapor from aqueous ammonia. In order to examine the significance of the mechanical properties of the PHPS-derived silica coatings, the pencil hardness was measured, which was compared with that of tetraethoxysilane (TEOS)-derived silica coatings. The pencil hardness was over 9H at a load of 1 kg, which was much higher than that of the TEOS-derived silica gel films, and was comparable to that of the TEOS-derived films heat treated at 300 °C. Second, poly(methyl methacrylate) (PMMA)–silica hybrid coatings were prepared from xylene solutions of PMMA and PHPS via exposure to the vapor from aqueous ammonia. Crack-free, optically transparent PMMA–silica hybrid coatings could be prepared, where PHPS-to-silica conversion was confirmed by infrared absorption spectroscopy. The refractive index was around 1.42–1.50, and the contact angle with water increased from 35 to 70° with increasing PMMA content. The pencil hardness greatly increased during the PHPS-to-silica conversion, and was much higher than that of the non-heat treated TEOS-derived hybrid coatings. The durability in tetrahydrofuran (THF) was also evaluated by measuring the reduction in thickness occurring during soaking in THF. The durability decreased with increasing PMMA content, but was much higher than that of the non-heat treated TEOS-derived hybrid coatings. Both the hardness and the durability were comparable to those of the TEOS-derived coatings heated at 300 °C. The hybrid coatings could also be deposited on poly(ethylene terephthalate) substrates, where no cracks were observed at high PMMA contents even when the substrate was bent.     

Ambient-curable polysiloxane coatings: structure and mechanical properties

Ambient-curable polysiloxane coatings were prepared by hydrolysis and condensation of 3-methacryloxypropylmethyldimethoxysilane (MPDS) and methyltriethoxysilane (MTES) and subsequently mixing with 3-aminopropyltriethoxysilane (APS). The structures of the as-obtained polysiloxane oligomers as well as the dried polysiloxane coatings on tinplate substrates were analyzed by FTIR and ²⁹Si NMR. The mechanical properties of the coatings were thoroughly examined at both macro-level and micro-level using a pendulum hardness rocker, an impact tester, and a nanoindentation/nanoscratch instrument. Effects of the molar ratio of MPDS/MTES, the dosage of aqueous ammonia solution, and the catalytic condition on the structure of polysiloxane oligomers as well as the structure and mechanical properties of the polysiloxane coatings were investigated. The dried coatings with thickness of 15–26 μm are highly elastic. The hardness (Koenig hardness and microhardness), impact resistance and scratch resistance are mainly dependent on the condensation degree of polysiloxane coatings rather than on the organic component of the coatings. A proper pre-hydrolysis process or more APS is benefit for enhancing the mechanical strength of the polysiloxane coatings. Polysiloxane coatings with high hardness and excellent scratch resistance can be prepared preferentially at low molar ratio of MPDS/MTES.     

Synthesis and properties of novel conjugated poly(silylacetylene silazane)s

A series of novel conjugated polymers, poly(silylacetylene silazane)s having different substituents, were prepared by ammonolysis of the corresponding α,ω‐dichlorosilyleneacetylene oligomers. The structures and properties of the poly(silylacetylene silazane)s were characterized by Fourier transform infrared, ¹H, ¹³C, ²⁹Si NMR, and elemental analyses, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and spectrofluorophotometry. The resulting polymers had good thermal properties and were moderately fluorescent. Their thermal stability was improved, and obvious red shift was observed when a phenyl substituent was attached on a silicon atom of polymers in the emission spectra. These polymers have the potential to be used as light‐emitting materials with good thermal stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2897–2903, 2004     

Thermal,viscoelastic, and mechanical properties of DCPD-containing polymers

The thermal, viscoelastic, and mechanical properties of cured dicyclopentadiene (DCPD)-containing polymers prepared from novel DCPD-modified unsaturated epoxypolyesters and styrene were evaluated. This was accomplished using thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, three-point bending test, and Brinell’s hardness. The thermal, viscoelastic, and mechanical properties of DCPD-containing polymers were strongly dependent on chemical structure. The cross-linking density (υ _e) of obtained networks increased with increasing content of carbon–carbon double bonds in the poly(ester) structure. In addition, the introduction of DCPD rings into the poly(ester) structure increased the rigidity of the molecular backbone. It resulted in obtaining polymers which showed great improvement in mechanical properties including remarkably higher storage modulus ( E_{20 ^°\textC}^￠ E_{{20\,{}^{\circ}{\text{C}}}}^{'} ), flexural modulus at bending (E _mod), hardness, lower extension at maximum force (ε-F _max), as well as higher thermal stability. These good properties make these materials highly promising as potential candidates for structural applications.     

Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

Curing and thermal behaviour of a flame retardant cycloaliphatic epoxy resin based on phosphorus containing poly(amide–imide)s

The curing behaviour of 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate was investigated by the dynamic differential scanning calorimetry (DSC) using phosphorus-containing poly(amide–imide)s (PAIs) having free amine groups, 4,4′-diaminodiphenylmethane (PM) and p-phenylenediamine (PA), in the ratio of 1:1. The PAIs were prepared by co-polymerization of diimide–diacid (DIDA) and phosphorus-containing triamines having phenylene moiety. l-Tryptophan and pyromellitic anhydride were used to synthesize DIDA. Triamines used in the synthesis PAIs were tris(3-aminophenyl) phosphine (TAP), tris(3-aminophenyl) phosphine oxide (TAPO) and bis(3-aminophenyl) aminotolyl phosphine (BAP). TAP-, TAPO- and BAP-containing PAIs were designated as PTAP, PTAPO and PBAP, respectively. These PAIs with free amine groups were characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopic techniques and elemental analysis. The mixture of PAIs and PM or/and PA in the ratios of 0:1, 1:0 and 0.5:0.5 was used for investigation. DSC was used to study the curing of epoxy by recording the DSC scans at heating rates of 10 °C min^?1. Thermal stability of epoxy resin cured isothermally was evaluated by recording thermo gravimetric traces in nitrogen atmosphere at the heating rate of 20 °C min^?1. All samples are highly stable, and the 10 % mass loss found was in the range of 335–520 °C. The percent char yield was highest in case of resin sample E/PM/PTAPO. The flame-retardant properties of cured epoxy resins were investigated by the limiting oxygen index test (LOI) and UL94 test. When phosphorus was incorporated in epoxy resin, the epoxy resin system met the UL94 V-0 classification and the LOI reached at 37.8, because of nitrogen–phosphorus synergistic effect.