Amperometric determination of the insecticide fipronil using batch injection analysis: comparison between unmodified and carbon-nanotube-modified electrodes

The electrochemical oxidation of fipronil is investigated on unmodified and multi-walled carbon-nanotube (MWCNT)-modified glassy carbon electrodes (GCEs), and its amperometric determination using batch injection analysis (BIA) is demonstrated. An oxidation peak was observed at 1.5 V in a 0.1 mol L^?1 HClO₄/acetone solution (50:50, v/v) on both surfaces. Although MWCNT-modified GCE provided greater sensitivity, the unmodified GCE showed low RSD value, wider linear range, and reduced adsorption of fipronil or its oxidized products on the electrode surface. A detection limit of 4.7 μmol L^?1 and linear range of 25–300 μmol L^?1 were obtained using a bare GCE. The method was applied in veterinary formulations with results in agreement with those obtained by high-performance liquid chromatography.     

Highly sensitive electrocatalytic determination of pyrazinamide using a modified poly(glycine) glassy carbon electrode by square-wave voltammetry

A new voltammetric sensor based on electropolymerization of glycine at glassy carbon electrode (GCE) was developed and applied to determine of pyrazinamide (PZA) by square-wave voltammetry (SWV). The initial cyclic voltammetric studies showed an electrocatalytic activity of poly(Gly)/GCE on redox system of pyrazinamide in 0.1 mol L^?1 phosphate buffer solution pH 7.5, with E _Pc and E _Pa in ?0.85 and ?0.8 V (versus E _Ag/AgCl), respectively. Studies at different scan rates suggest that the redox system of pyrazinamide at poly(Gly)/GCE is a process controlled by diffusion in the interval from 10 to 100 mV s^?1. Square-wave voltammetry-optimized conditions showed a linear response of PZA concentrations in the range from 0.47 to 6.15 μmol L^?1 (R?=?0.998) with a limit of detection (LOD) of 0.035 μmol L^?1 and a limit of quantification (LOQ) of 0.12 μmol L^?1. The developed SWV-poly(Gly)/GCE method provided a good intra-day (RSD?=?3.75 %) and inter-day repeatability (RSD?=?4.96 %) at 4.06 μmol L^?1 PZA (n?=?10). No interference of matrix of real samples was observed in the voltammetric response of PZA, and the method was considered to be highly selective for the compound. In the accuracy test, the recovery was found in the range of 98.2 and 104.0 % for human urine samples and pharmaceutical formulation (tablets). The PZA quantification results in pharmaceutical tablets obtained by the proposed SWV-poly(Gly)/GCE method were comparable to those found by official analytical protocols.     

Sensitive detection of sulfanilamide by redox process electroanalysis of oxidation products formed in situ on glassy carbon electrode

This paper reported a simple method for sulfanilamide determination by redox process electroanalysis of oxidation products (SFDox) formed in situ on glassy carbon electrode. The CV experiments showed a reversible process after applied E _acc = + 1.06 V and t _acc = 1 s, in 0.1 mol L^?1 BRBS (pH = 2.0) at 50 mV s^?1. Different voltammetric scan rates (from 10 to 450 mV s^?1) suggested that the redox peaks of SFDox on the glassy carbon electrode (GCE) is an adsorption-controlled process. Square-wave voltammetry (SWV) method optimized conditions showed a linear response to SFD from 3.00 to 250.0 μmol L^?1 (R = 0.998) with a limit of detection of 0.638 μmol L^?1 and limit of quantification of 2.0 μmol L^?1. The developed the SWV method was successfully used in the determination of SFD pharmaceutical formulation and human serum. The SFD quantification results in pharmaceutical obtained by SWV-GCE were comparable to those found by official analytical protocols.     

Bioaccumulation of <Superscript>137</Superscript>Cs and <Superscript>60</Superscript>Co by bacteria isolated from spent nuclear fuel pools

This paper is focused on a characterization of bacterial contamination in pool water of the interim spent fuel storage (JAVYS Inc.) in Slovak Republic and on bioaccumulation of ¹³⁷Cs and ⁶⁰Co by isolated bacteria. Bacterial community in pool water is kept on very low level by extremely low concentration of solutes in deionized water and by the efficient water filtration system. Based on standard methods and sequencing of 16S rDNA four pure bacterial cultures were identified as Kocuria palustris, Micrococcus luteus, Ochrobactrum spp. and Pseudomonas aeruginosa. Isolated aerobic bacteria were able to bioaccumulate ¹³⁷Cs and ⁶⁰Co in laboratory experiments. The mechanism of Co and Cs binding involve rapid interactions with anionic groups of the components of cell surface and in the case of Cs⁺ ions is followed by transport processes across cytoplasm membranes and by intracellular distribution. The maximum specific uptake of Cs⁺ after 48 h cultivation in mineral medium (MM) reached 7.54 ± 0.48 μmol g^?1 dw (Ochrobactrum spp.), 19.6 ± 0.1 μmol g^?1 dw (M. luteus) and 20.1 ± 2.2 μmol g^?1 dw (K. palustris). The maximum specific uptake of Co²⁺ after 24 h cultivation in MM reached 31.1 ± 3.5 μmol g^?1 dw (Ochrobactrum spp.), 86.6 ± 12.2 μmol g^?1 dw (M. luteus) and 16.9 ± 1.2 μmol g^?1 dw (K. palustris). These results suggest that due to the long lasting uptake of ¹³⁷Cs, ⁶⁰Co and other radionuclides by biofilm in pool water high specific radioactivities (Bq m^?2) can be expected on stainless steel walls of pools.     

A novel electrochemical sensor based on gold nanorods and Nafion-modified GCE for the electrocatalytic oxidation of nitrite

The high-quality CTAB-stabilized gold nanorods (Au NRs) were prepared by the way of seed-mediated protocol. The microstructure and composition of the Au NRs were identified by transmission electron microscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy and UV–visible spectroscopy. Further, a novel non-enzymatic electrochemical sensor of nitrite based on Au NRs–Nafion-modified glassy carbon electrode (GCE) was successfully developed. Under the optimum experimental conditions, the electrochemical behaviors of nitrite on the Au NRs–Nafion-modified GCE were systematically studied by electrochemical impedance spectroscopy, cyclic voltammetry and chronoamperometry. The electrochemical investigations indicated that the Au NRs–Nafion-modified GCE had a wide linear range of 3.0 × 10^?6–6.0 × 10^?3 mol L^?1, an acceptable sensitivity of 130.9 ± 0.05 μA mM^?1 cm^?2, a fast response time of 3 s and a low detection limit of 0.64 ± 0.02 μmol L^?1 at the signal-to-noise ratio of 3 (S/N = 3). Additionally, the electrochemical sensor also showed good stability and favorable anti-interference capability for the detection of nitrite.     

Determination of prazosin in pharmaceutical samples by flow injection analysis with multiple-pulse amperometric detection using boron-doped diamond electrode

This work describes the development of a simple, fast and low-cost method for determining prazosin (PRA) in pharmaceutical samples by flow injection analysis with multiple-pulse amperometric (FIA-MPA) detection using a boron-doped diamond film electrode. Electrochemical detection of PRA was optimized in phosphate buffer pH 4.0 by cyclic voltammetry, in which PRA presented two oxidation processes around at 0.97 and 1.40 V versus Ag/AgCl (3.0 mol L^?1 KCl). In these conditions, PRA also showed one reduction process at ?0.75 V that is dependent on the oxidation processes. Thus, the determination of PRA by FIA-MPA detection consisted on the application of a two-potential waveform, E ₁ (generator potential)?=?1.6 V/400 ms and E ₂ (collector potential)?=??1.0 V/30 ms, with sample loop of 150 μL and flow rate of 3.0 mL min^?1. The method showed good repeatability (RSD?<?3.0 %) and high analytical frequency (70 injections per h). The working linear range was obtained from 2 to 200 μmol L^?1 with a limit of detection of 0.5 μmol L^?1. The recovery tests in all samples were approximately 100 %, and the results were compared with chromatographic methods.     

Electrochemical sensing of <Emphasis Type="SmallCaps">D</Emphasis>-penicillamine on modified glassy carbon electrode by using a nanocomposite of gold nanoparticles and reduced graphene oxide

A new electrochemical sensor was developed for determination of D-penicillamine using glassy carbon electrode which had been modified by gold nanoparticles–reduced graphene oxide nanocomposite (AuNPs/RGO/GCE) in aqueous solution. Cyclic voltammetry, transmission electron microscopy and electrochemical impedance spectroscopy were used for characterization of the modified electrode. The results indicated that the kinetic of oxidation reaction of D-penicillamine at the surface of the electrode was controlled by both diffusion and adsorption processes. In 0.1 mol L^?1 phosphate buffer (pH 2.0), the oxidation current increased linearly with concentration of D-penicillamine with a linear range of 5.0 × 10^?6 to 1.1 × 10^?4 mol L^?1 and regression coefficient of R ² = 0.9972. Theoretical detection limit, defined based on 3σ of the blank signal (n = 9) divided by the slope of the linear regression equation, was 3.9 × 10^?6 mol L^?1 D-penicillamine using differential pulse voltammetry. The developed method was successfully applied to the determination of D-penicillamine in pharmaceutical formulation and blood serum samples.     

Synthesis of flower-like cuo hierarchical nanostructures as an electrochemical platform for glucose sensing

Flower-like CuO hierarchical nanostructures were synthesized on copper foil substrate through a simple wet chemical route in alkaline media at room temperature. SEM images collected at different reaction times revealed the transformation of initially formed Cu(OH)₂ nanowires to flower-like CuO nanostructures. The hierarchical structure of the as-prepared CuO showed high electrocatalytic activity towards the oxidation of glucose making it a promising electrode material for the development of non-enzymatic glucose sensor. The amperometric sensor exhibited a wide linear response to glucose ranging from 4.5 × 10^?5 to 1.3 × 10^?3 mol L^?1 (R ² = 0.99317) at fixed potential of 0.3 V. The detection limit was 6.9 × 10^?6 mol L^?1 (LOD = 3σ/s) with a sensitivity of 1.71 μA μmol^?1 cm^?2. Moreover, the developed sensor offers a fast amperometric response, good selectivity and stability.     

Growth of Cyanobacteria: Optimization for Increased Carbohydrate Content

Growths of Lyngbya limnetica and Oscillatoria obscura were investigated at varying pH, light intensity, temperature, and trace element concentration with a view to optimize these parameters for obtaining the maximum carbohydrate content. The maximum growth for both strains was obtained at pH 9.0 and temperature 20 ± 3 °C using a light intensity of 68.0 μmol m^?2 s^?1 with continuous shaking. Growth under the nitrogen starvation condition affected the carbohydrate content more compared to the phosphorus starvation, and maximum concentrations were found as 0.660 and 0.621 g/g of dry biomass for L. limnetica and O. obscura, respectively. Under the optimized nitrogen-rich conditions, the specific growth rates for the two strains were found to be 0.187 and 0.215 day^?1, respectively. The two-stage growth studies under nitrogen-rich (stage I) followed by nitrogen starvation (stage II) conditions were performed, and maximum biomass and carbohydrate productivity were found as 0.088 and 0.423 g L^?1 day^?1 for L. limnetica. This is the first ever attempt to evaluate and optimize various parameters affecting the growth of cyanobacterial biomass of L. limnetica and O. obscura as well as their carbohydrate contents.     

Prospecting fungal ligninases using corncob lignocellulosic fractions

Microorganisms play an important role in the bioconversion of organic residues and have therefore become promising for obtaining value-added enzymes. In an attempt to take advantage of the by-products and residues of bioconversion, this work sought to use lignocellulosic fractions extracted from corncob as fermentation substrate for ligninase induction by Pleurotus sajor-caju. To obtain the corncob lignocellulosic fractions, biomass was submitted to treatment by alkaline extraction (NaOH 0.75 mol L^?1, 55 °C for 2 h) and organosolv (40% ethanol/water, 185 °C for 20 min). The in natura biomass and lignocellulosic fractions were used as substrates in the subsequent fermentation processes: 2% in natura corncob; 2% cellulose–lignin complex fraction; 2% lignin-enriched fraction; 1% lignin-enriched fraction; and synthetic medium fungal (SMF) as standard. Chemical and physical–chemical analyses indicated the effectiveness of the lignocellulosic extraction process. According to the results, the developed system promoted the induction of ligninases by P. sajor-caju. The enzymatic analysis showed laccase production (768 U L^?1) using the 1% lignin-enriched fraction as substrate. Manganese peroxidase production was 1050 U L^?1 with the use of the 2% lignin-enriched fraction. The presence of lignocellulosic fractions extracted from corncob’s lignin-enriched fraction in the culture medium favored the induction of ligninases in comparison to the use of residue alone.     

Sensitive determination of the endocrine disruptor bisphenol A at ultrathin film based on nanostructured hybrid material SiO<Subscript>2</Subscript>/GO/AgNP

In this work, we described an electrochemical sensor using a nanocomposite based on graphene oxide (GO), silver nanoparticles (AgNP), and disordered mesoporous silica (SiO₂), which was used for the determination of bisphenol A in water samples. Initially, the hybrid material SiO₂/GO was synthesized via sol-gel process, subsequently decorated with AgNP with an approximate 20 nm particle size prepared directly on the surface of the SiO₂/GO using N, N-dimethylformamide (DMF) as an agent reducer. A glassy carbon electrode was modified with SiO₂/GO/AgNP and used in developing a sensitive electrochemical sensor for the determination of bisphenol A in phosphate buffer 0.1 mol L^?1 (pH 7.0). The detection limit was 45.2 nmol L^?1 with a linear response range between 1.0 × 10^?7 and 2.6 × 10^?6 mol L^?1 and a sensitivity of 1.27 × 10^?7 A mol^?1 L. Finally, the optimized electrochemical sensor was used for the quantitation of endocrine interfering in natural waters.     

Preconcentration and spectrophotometric determination of trace amount of formaldehyde using hollow fiber liquid-phase microextraction based on derivatization by Hantzsch reaction

Formaldehyde is known as a highly toxic compound to humans and identified as a carcinogenic substance. In this study, Hantzsch reaction was utilized for the derivatization of trace amounts of formaldehyde in aqueous samples with acetylacetone in the presence of ammonia to form an extractable colored product named 3,5-diacetyl 1,4-dihydrolutidine (DDL) and its further extraction using two-phase hollow fiber liquid-phase microextraction. The main experimental variables affecting the extraction performance were investigated and optimized. Under the optimum conditions (sample volume 12 mL; reaction temperature 70 °C; ammonium acetate buffer solution 4 mL 0.1 mol L^?1; acetylacetone 5 mL 0.15 mol L^?1; solvent octanol, salt concentration 20% (w/v) NaCl; pH of donor phase 7.0; stirring speed 400 rpm and extraction time 30 min), the linear dynamic range, limit of detection (LOD as 3S _b/m) and relative standard deviation (RSD %) of the proposed method were obtained as 5–250 μg L^?1 (r ² = 0.9979), 3.6 μg L^?1 and 2.5%, respectively. Finally, the applicability of the proposed method was examined, and very good results were obtained. The results confirmed the applicability of the proposed method as a versatile, low-cost and sensitive preconcentration method for determination of low concentrations of formaldehyde in aqueous solutions.     

Carbon ceramic electrodes modified with mixed oxides SiO<Subscript>2</Subscript>/SnO<Subscript>2</Subscript> for determination of levofloxacin

The preparation of a carbon ceramic electrode modified with SnO₂ (CCE/SnO₂) using tin dibutyl diacetate as precursor was optimized by a 2³ factorial design. The factors analyzed were catalyst (HCl), graphite/organic precursor ratio, and inorganic precursor (dibutyltin diacetate). The statistical treatment of the data showed that only the second-order interaction effect, catalyst × inorganic precursor, was significant at 95% confidence level, for the electrochemical response of the system. The obtained material was characterized by scanning electron microscopy (MEV), X-ray diffraction (XRD), RAMAN spectroscopy, XPS spectra, and voltammetric techniques. From the XPS spectra, it was confirmed the formation of the Si–O–Sn bond by the shift in the binding energy values referred to Sn 3d3/2 due to the interaction of Sn with SiOH species. The incorporation of SnO₂ provided an increment of the electrode response for levofloxacin, with Ipa = 147.0 μA for the ECC and Ipa = 228.8 μA for ECC/SnO₂, indicating that SnO₂ when incorporated into the silica network enhances the electron transfer process. Under the optimized working conditions, the peak current increased linearly with the levofloxacin concentration in the range from 6.21×10^?5 to 6.97×10^?4 mol L^?1 with quantification and detection limits of 3.80×10^?5 mol L^?1 (14.07 mg L^?1) and 1.13×10^?5 mol L^?1 (4.18 mg L^?1), respectively.     

Heavy Metal Resistances and Chromium Removal of a Novel Cr(VI)-Reducing Pseudomonad Strain Isolated from Circulating Cooling Water of Iron and Steel Plant

Three bacterial isolates, GT2, GT3, and GT7, were isolated from the sludge and water of a circulating cooling system of iron and steel plant by screening on Cr(VI)-containing plates. Three isolates were characterized as the members of the genus Pseudomonas on the basis of phenotypic characteristics and 16S rRNA sequence analysis. All isolates were capable of resisting multiple antibiotics and heavy metals. GT7 was most resistant to Cr(VI), with a minimum inhibitory concentration (MIC) of 6.5 mmol L^?1. GT7 displayed varied rates of Cr(VI) reduction in M2 broth, which was dependent on pH, initial Cr(VI) concentration, and inoculating dose. Total chromium analysis revealed that GT7 could remove a part of chromium from the media, and the maximum rate of chromium removal was up to 40.8 %. The Cr(VI) reductase activity of GT7 was mainly associated with the soluble fraction of cell-free extracts and reached optimum at pH 6.0～8.0. The reductase activity was apparently enhanced by external electron donors and Cu(II), whereas it was seriously inhibited by Hg(II), Cd(II), and Zn(II). The reductase showed a K _m of 74 μmol L^?1 of Cr(VI) and a V _max of 0.86 μmol of Cr(VI) min^?1 mg^?1 of protein. The results suggested that GT7 could be a promising candidate for in situ bioremediation of Cr(VI).     

Selective and low potential electrocatalytic oxidation of NADH using a 2,2-diphenyl-1-picrylhydrazyl immobilized graphene oxide-modified glassy carbon electrode

DPPH (2,2-diphenyl-1-picrylhydrazil), a free radical-containing organic compound, is used widely to evaluate the antioxidant properties of plant constituents. Here, we report an efficient electroactive DPPH molecular system with excellent electrocatalytic sensor properties, which is clearly distinct from the traditional free radical-based quenching mechanism. This unusual molecular status was achieved by the electrochemical immobilization of graphene oxide (GO)-stabilized DPPH on a glassy carbon electrode (GCE). Potential cycling of the DPPH adsorbed-GCE/GO between ??1 and 1 V (Ag/AgCl) in a pH 7 solution revealed a stable and well-defined pair of redox peaks with a standard electrode potential, E⁰′?=?0?±?0.01 V (Ag/AgCl). Several electrochemical characterization studies as well as surface analysis of the GCE/GO@DPPH-modified electrode by transmission electron microscopy, Raman, and infrared spectroscopy collectively identified the imine/amine groups as the redox centers of the electroactive DPPH on GO. The use of different carbon-supports showed that only oxygen-functionalized GO and MWCNTs could provide major electroactivity for DPPH. This highlights the importance of a strong hydrogen-bonded network structure assisted by the concomitant π-π interactions between the organic moiety and oxygen function groups of carbon for the high electroactivity and stability of the GCE/GO@DPPH-NH/NH₂-modified electrode. The developed electrode exhibited remarkable performance towards the electrocatalytic oxidation of NADH at 0 V (Ag/AgCl). The amperometric i-t sensing of NADH showed high sensitivity (488 nA μM^?1 cm^?2) and an extended linear range (50 to 450 μM) with complete freedom from several common biochemical/chemical interferents, such as ascorbic acid, hydrazine, glucose, cysteine, citric acid, nitrate, and uric acid.     

Synthesis,antifungal and insecticidal activity of novel [1,2,4]triazolo[4,3-<Emphasis Type="Italic">a</Emphasis>]pyridine derivatives containing a sulfide substructure

A series of [1,2,4]triazolo[4,3-a]pyridine derivatives bearing a sulfide substructure was designed, synthesized and characterized via ¹H·NMR, ¹³C·NMR, IR and elemental analyses. Bioassay Results indicated some of the derivatives displayed good fungicidal activity on Rhizoctonia cerealis, moderated insecticidal activity against Plutella xylostella and good insecticidal activity on Helicoverpa armigera. The inhibitory effects of compounds 4g and 4u against Rhizotonia cerealis were 70.9% at 50 μg mL^?1; the IC₅₀ values of compounds 4d and 4s against Plutella xylostella were 43.87 and 50.75 μg mL^?1, respectively. And the IC₅₀ values of compounds 4d, 4q, and 4s on Helicoverpa armigera were 58.3, 77.14 and 65.31 μg mL^?1, respectively, which were better than that of commercial chlorpyrifos (103.77 μg mL^?1).     

Growth Parameters,Photosynthetic Performance,and Biochemical Characterization of Newly Isolated Green Microalgae in Response to Culture Condition Variations

This work aimed to characterize two native microalgal strains newly isolated from South Mediterranean areas and identified as Chlorella sorokiniana ES3 and Neochloris sp. AM2. The growth properties and biochemical composition of these microalgae were evaluated in different culture media (Algal, BG-11, f/2, and Conway). Among the tested media, nitrate- and phosphate-rich Algal medium provided the maximum biomass productivities (85.5 and 111.5 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively), while the nitrate- and phosphate-deficient f/2 medium resulted in the highest lipid productivities (24.1 and 35.8 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively). The physiological state of both microalgae was investigated under different light and temperature levels using the pulse amplitude-modulated fluorometry. The better photosynthetic efficiency of C. sorokiniana was obtained at 23 °C with a light saturation of 156 μE m^?2 s^?1, while that of Neochloris sp. was achieved at 15 °C with a light saturation of 151 μE m^?2 s^?1. The analysis of fatty acid profile and biodiesel parameters revealed that C. sorokiniana, cultivated in Algal and f/2 media, can be considered as a suitable candidate for high-quality biodiesel production.     

Kinetics and Mechanism of the Formation of (1,5)bis(2-hydroxybenzamido)3- azapentaneiron(III) and its Reactions with Thiocyanate,Azide, Acetate,Sulfur(IV) and Ascorbic Acid in Solution,and the Synthesis and Characterization of (nitrato)bis- (2-hydroxybenzamido)3-azapentaneiron(III). The Role of Phenol–amide–amine Coordination

The complexation of iron(III) with (1,5)bis(2-hydroxybenzamido)3-azapentane (H₂L) under varying [H⁺]_T (0.01–0.1 mol dm^?3) and [Fe^III]_T (3.0 × 10^?4–1.7 × 10^?2, [L]_T=(0.5 - 1.0) × 10^-4 mol dm^?3) (I=0.3 mol dm^?3, 10% v/v, MeOH  + H₂O, 25.0 °C) was reversible and displayed monophasic kinetics; the dominant path involved FeOH²⁺ and H₃L⁺. The mechanism is essentially a dissociative interchange (I_d) and dissociation of the aqua ligand from the encounter complex, [Fe(OH₂)₅OH²⁺, H₃L⁺] is rate-limiting. Equilibrium measurements indicated that the ligand binds iron(III) in a bidentate, tetradentate and pentadentate fashion under varying pH conditions. Iron(III) promoted deprotonation of the phenol moieties, and sec-NH ₂ ⁺ of the dien unit are in tune with this proposition. The octahedral coordination of [Fe(HL/L})(OH₂)]^2+/+ is further supported by the aqua ligand substitution by AcO^?, NCS^?, N ₃ ^- /N₃H, SO ₃ ^2- /HSO ₃ ^- . However, marked pK perturbation of the bound ascorbate in [Fe(L)(HAsc/Asc)]^0/? (ΔpK_{{[Fe(L)(HAsc)] ? HAsc?}}=6) is compelling evidence for chelation of HAsc^?/Asc^2? leading to unusual hepta coordination of iron(III) in the ascorbate complexes. Despite the multidentate nature of the ligand, its iron(III) complexes remain sensitive to reduction by S^IV and ascorbic acid. The complex (nitrato){(1,5)bis(2-hydroxybenzamido)3-azapentane}iron(III) has been synthesised and characterised by elemental analysis, i.r. and u.v.–vis spectral measurements. The room temperature magnetic moment (μ_eff=4.2 BM) conforms to the intermediate spin state of iron(III) (S=3/2) which is further supported by e.s.r. measurements (77 K, g=4.2, 8.1) and the ⁵⁷Fe Mössbauer spectrum (δ=0.41 mm s^?1; ΔE_Q=0.78 mm/s). The cyclic voltametry (MeOH, TEAP as background electrolyte) display only one quasi-reversible peak in the ?0.254 to ?0.4 V range (vs. SCE), the irreversibility being due to the formation of an iron(II) complex which dissociates under the experimental conditions.     

Enzymatic Hydrolysis of Black Liquor Xylan by a Novel Xylose-Tolerant,Thermostable β-Xylosidase from a Tropical Strain of <Emphasis Type="Italic">Aureobasidium pullulans</Emphasis> CBS 135684

From three cell-associated β-xylosidases produced by Aureobasidium pullulans CBS 135684, the principal enzyme was enriched to apparent homogeneity and found to be active at high temperatures (60–70 °C) over a pH range of 5–9 with a specific activity of 163.3 units (U) mg^?1. The enzyme was thermostable, retaining over 80% of its initial activity after a 12-h incubation at 60 °C, with half-lives of 38, 22, and 10 h at 60, 65, and 70 °C, respectively. Moreover, it was tolerant to xylose inhibition with a K _i value of 18 mM. The K _m and V _max values against p-nitrophenyl-β-d-xylopyranoside were 5.57 ± 0.27 mM and 137.0 ± 4.8 μmol min^?1 mg^?1 protein, respectively. When combining this β-xylosidase with xylanase from the same A. pullulans strain, the rate of black liquor xylan hydrolysis was significantly improved by up to 1.6-fold. The maximum xylose yield (0.812 ± 0.015 g g^?1 dry weight) was obtained from a reaction mixture containing 10% (w/v) black liquor xylan, 6 U g^?1 β-xylosidase and 16 U g^?1 xylanase after incubation for 4 h at 70 °C and pH 6.0.     

Production of <Emphasis Type="Italic">R</Emphasis>-Mandelic Acid Using Nitrilase from Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Cells Immobilized with Tris(Hydroxymethyl)Phosphine

Recombinant Escherichia coli cells harboring nitrilase from Alcaligenes faecalis were immobilized using tris(hydroxymethyl)phosphine (THP) as the coupling agent. The optimal pH and temperature of the THP-immobilized cells were determined at pH 8.0 and 55 °C. The half-lives of THP-immobilized cells measured at 35, 40, and 50 °C were 1800, 965, and 163 h, respectively. The concentration of R-mandelic acid (R-MA) reached 358 mM after merely 1-h conversion by the immobilized cells with 500 mM R,S-mandelonitrile (R,S-MN), affording the highest productivity of 1307 g L^?1 day^?1 and the space-time productivity of 143.2 mmol L^?1 h^?1 g^?1. The immobilized cells with granular shape were successfully recycled for 60 batches using 100 mM R,S-MN as substrate at 40 °C with 64% of relative activity, suggesting that the immobilized E. coli cells obtained in this study are promising for the production of R-MA.