Darstellung und Kristallstrukturen von tBu‐substituierten Disiloxanen des Typus tBu2SiX‐O‐SiYtBu2 (X = Y = OH,Br; X = OH,Y = H) und den Addukten tBu3SiOH·(HO3SCF3)0.5·H2O und tBu3SiOLi·(LiO3SCF3)2·(H2O)2

Syntheses and Crystal Structures of tBu‐substituted Disiloxanes tBu₂SiX‐O‐SiYtBu₂ (X = Y = OH, Br; X = OH, Y = H) and of the Adducts tBu₃SiOH·(HO₃SCF₃)_0.5·H₂O and tBu₃SiOLi·(LiO₃SCF₃)₂·(H₂O)₂ The disiloxanes tBu₂SiX‐O‐SiYtBu₂ (X = Y = H, OH) are accessible from the reaction of CF₃SO₂Cl with tBu₂SiHOH or tBu₂Si(OH)₂. By this reaction the disiloxane tBu₂SiH‐O‐SiHtBu₂ is formed together with tBu₂SiH‐O‐SiOHtBu₂. The disiloxanes tBu₂SiX‐O‐SiYtBu₂ (X = Y = Cl, Br) can be synthesized almost quantitatively from tBu₂SiH‐O‐SiHtBu₂ with Cl₂ and Br₂ in CH₂Cl₂. The structures of the disiloxanes tBu₂SiX‐O‐SiYtBu₂ (X = H, Y = OH; X = Y = OH, Br) show almost linear Si‐O‐Si units with short Si‐O bonds. Single crystals of the adducts tBu₃SiOH·(HO₃SCF₃)_0.5·H₂O and tBu₃SiOLi·(LiO₃SCF₃)₂·(H₂O)₂ have been obtained from the reaction of tBu₃SiOH with CF₃SO₃H and of tBu₃SiO₃SCF₃ with LiOH. According to the result of the X‐ray structural analysis (hexagonal, P‐62c), tBu₃SiOLi · (LiO₃SCF₃)₂·(H₂O)₂ features the ion pair [(tBu₃SiOLi)₂(LiO₃SCF₃)₃(H₂O)₃Li]⁺ [CF₃SO₃]^?. The central framework of the cation forms a trigonal Li₆ prism.     

Synthesis and solid‐state structures of t‐Bu3Ga–EPh3 Lewis acid–base adducts

Three Lewis acid–base adducts t‐Bu₃Ga–EPh₃ (E = P 1 , As 2 , Sb 3 ) were synthesized by reactions of Ph₃E and t‐Bu₃Ga and characterized by heteronuclear NMR (¹H, ¹³C (³¹P)) and IR spectroscopy, elemental analysis and single crystal X‐ray diffraction. Their structural parameters are discussed and compared to similar t‐Bu₃Ga adducts. The strength of the donor‐acceptor interactions within 1 – 3 was investigated in solution by temperature‐dependent ¹H NMR spectroscopy and by quantum chemical calculations.     

Nitric Oxide Insertion Reactivity with the Bismuth–Carbon Bond: Formation of the Oximate Anion, [ON(C6H2tBu2O)]−, from the Oxyaryl Dianion, (C6H2tBu2O)2−

The first example of NO insertion into a Bi?C bond has been found in the direct reaction of NO with a Bi³⁺ complex of the unusual (C₆H₂tBu₂‐3,5‐O‐4)^2? oxyaryl dianionic ligand, namely, Ar′Bi(C₆H₂tBu₂‐3,5‐O‐4) [Ar′=2,6‐(Me₂NCH₂)₂C₆H₃] ( 1 ). The oximate complexes [Ar′Bi(ONC₆H₂‐3,5‐tBu₂‐4‐O)]₂(μ‐O) ( 3 ) and Ar′Bi(ONC₆H₂‐3,5‐tBu₂‐4‐O)₂ ( 4 ) were formed as a mixture, but can be isolated in pure form by reaction of NO with a Bi³⁺ complex of the [O₂C(C₆H₂tBu₂‐3‐5‐O‐4]^2? oxyarylcarboxy dianion, namely, Ar′Bi[O₂C(C₆H₂tBu₂‐3‐5‐O‐4)‐κ²O,O’]. Reaction of 1 with Ph₃CSNO gave an oximate product with (Ph₃CS)^1? as an ancillary ligand, (Ph₃CS)(Ar′)Bi(ONC₆H₂‐3,5‐tBu₂‐4‐O) ( 5 ).     

Sekundäre Phosphinchalkogenide. VII. Synthese von Bis(tert.-butylphosphino)ethan,ButHPCH2CH2PHBut,und 1-tert.-Butylphosphino-2-diphenylphosphino-ethan,Ph2PCH2CH2PHBut,sowie deren sekundäre Phosphinchalkogenide

Secondary Phosphine Chalcogenides. VII. Synthesis of Bis(tert.-butylphosphino)thane, Bu^tHPCH₂CH₂PHBu^t, and 1-tert.-Butylphosphino-2-diphenylphosphinoethane, Ph₂PCH₂CH₂PHBu^t, as well as their Secondary Phosphine Chalcogenides The reaction of Cl₂PCH₂CH₂PCl₂ with Bu^tMgCl gives Bu^tClPCH₂CH₂PClBu^t which is either hydrolysed to yield Bu^tH(O)PCH₂CH₂P(O)HBu^t or reduced to give Bu^tHPCH₂CH₂PHBu^t. This phosphine reacts with sulfur or selenium to give Bu^tH(E)PCH₂CH₂P(E)HBu^t (E = S, Se). Treatment of Ph₂PCH₂CH₂Cl with LiPHBu^t results Ph₂PCH₂CH₂PHBu^t which is oxidized to give Ph₂(E)PCH₂CH₂P(E)HBu^t (E = O, S, Se). The Ph₂P group appears to be oxidized primarily. The compounds obtained are characterized by means of I.R. ¹H and ³¹P-N.M.R. spectroscopy.     

Synthesis and Chloride Affinity of Sterically Demanding Ditopic Lithium Bis(pyrazol‐1‐yl)borates

The synthesis and full characterization of the sterically demanding ditopic lithium bis(pyrazol‐1‐yl)borates Li₂[p‐C₆H₄(B(Ph)pz^R₂)₂] is reported (pz^R = 3‐phenylpyrazol‐1‐yl ( 3 ^Ph), 3‐t‐butylpyrazol‐1‐yl ( 3 ^tBu)). Compound 3 ^Ph crystallizes from THF as THF‐adduct 3 ^Ph(THF)₄ which features a straight conformation with a long Li···Li distance of 12.68(1) Å. Compound 3 ^tBu was found to function as efficient and selective scavenger of chloride ions. In the presence of LiCl it forms anionic complexes [ 3 ^tBuCl]⁻ with a central Li‐Cl‐Li core (Li···Li = 3.75(1) Å).     

Hydrogen Peroxide and Di(hydroperoxy)propane Adducts of Phosphine Oxides as Stoichiometric and Soluble Oxidizing Agents

Aqueous hydrogen peroxide is widely used as an oxidizing agent in industry and academia. Herein, the hydrogen peroxide adducts of phosphine oxides, [tBu₃PO ? H₂O₂]₂ and [Ph₃PO ? H₂O₂]₂ ? H₂O₂, are described. Additionally, the corresponding di(hydroperoxy)propane adducts R₃PO ? (HOO)₂CMe₂ (R=Cy, Ph) were synthesized and characterized. All adducts could be obtained as large single crystals suitable for structural characterization by X‐ray crystallography and solid‐state NMR spectroscopy. The di(hydroperoxy)propane adducts are soluble in organic solvents which enables oxidation reactions in one phase. As the adducts are solid and molecular, they can easily be applied stoichiometrically. No loss of oxidizing power occurs upon long‐term storage of the single crystals at room temperature or the powders at ?20 °C.     

Characterization of a Palladium Dihydrogen Complex

The preparation and isolation of the first palladium dihydrogen complex is described. NMR spectroscopy reveals a very short H? H bond length, but the hydrogen molecule is activated toward heterolytic cleavage. An X‐ray crystal structure suggests that proton transfer to the ^tBuPCP (κ³‐2,6‐(^tBu₂PCH₂)₂C₆H₃) pincer ligand is possible. The basicity of the ipso‐carbon atom of the pincer ligand was investigated in a related complex.     

Nitrogen‐Based Lewis Acids Derived from Phosphonium Diazo Cations

Reaction of PPh₃ and [(p‐ClC₆H₄)N₂][BF₄] affords [(p‐ClC₆H₄)N(PPh₃)N(PPh₃)][BF₄] 1 , while reaction with (Ph₂PCH₂)₂ gave [(p‐ClC₆H₄)(NPh₂PCH₂)₂)][BF₄] 2 . These species confirm the Lewis acidity of [(p‐ClC₆H₄)N₂(PR₃)][BF₄] cations at N. In contrast, use of bulky phosphines afford the species [ArN₂(PR₃)][BF₄] (R=tBu 3 , Mes 4 ). Compound 3 undergoes one electron reduction to give the stable radical [(p‐ClC₆H₄)N₂(PtBu₃)]^. 5 . Combination of 3 and PtBu₃ acts as an FLP to effect (SPh)₂ cleavage, generating [PhSPtBu₃]⁺ and the radical [ArN₂(PR₃)]^.. Collectively, these data affirm the ability of the cations [ArN₂(PR₃)]⁺ to behave as one or two electron acceptors.     

New Strategies to Phosphino–Phosphonium Cations and Zwitterions

By employing strategies based on frustrated Lewis pair chemistry, new routes to phosphino‐phosphonium cations and zwitterions have been developed. B(C₆F₅)₃ is shown to react with H₂ and P₂tBu₄ to effect heterolytic hydrogen activation yielding the phosphino‐phosphonium borate salt [(tBu₂P)PHtBu₂] [HB(C₆F₅)₃] ( 1 ). Alternatively, alkenylphosphino‐phosphonium borate zwitterions are accessible by reaction of B(C₆F₅)₃ and PhC?CH with P₂Ph₄, P₄Cy₄, or P₅Ph₅ affording the species [(Ph₂P)P(Ph)₂C(Ph)?C(H)B(C₆F₅)₃] ( 2 ), [(P₃Cy₃)P(Cy)C(Ph)?C(H)B(C₆F₅)₃] ( 3 ), and [(P₄Ph₄)P(Ph)C(Ph)?C(H)B(C₆F₅)₃] ( 4 ). A related phosphino‐phosphonium borate species—[(Ph₄P₄)P(Ph)C₆F₄B(F)(C₆F₅)₂] ( 5 ) is also isolated from the thermolysis of B(C₆F₅)₃ and P₅Ph₅.     

Catalytic Dehydrogenation of Amine-Boranes using Geminal Phosphino-Boranes

The reaction of the intramolecular frustrated Lewis pair (FLP) tBu₂PCH₂BPh₂ with the amine-boranes NH₃ · BH₃ and Me₂NH · BH₃ leads to the formation of the corresponding FLP-H₂ adducts as well as novel five-membered heterocycles that result from capturing the in situ formed amino-borane by a second equivalent of FLP. The sterically more demanding tBu₂PCH₂BMes₂ does not form such a five-membered heterocycle when reacted with Me₂NH · BH₃ and its H₂ adduct liberates dihydrogen at elevated temperatures, promoting the metal-free catalytic dehydrogenation of amine-boranes.     

Synthesis and characterization of diiron ethanedithiolate complexes with monosubstituted phosphine ligands

Reactions of (μ-edt)Fe₂(CO)₆ (edt = SCH₂CH₂S) (1) with the monophosphine ligands Ph₂PCH₂Ph, Ph₂PC₆H₁₁, Ph₂PCH₂CH₂CH₃, or P(2-C₄H₃O)₃ in the presence of Me₃NO?2H₂O afforded (μ-edt)Fe₂(CO)₅L [L = Ph₂PCH₂Ph, 2; Ph₂PC₆H₁₁, 3; Ph₂PCH₂CH₂CH₃, 4; P(2-C₄H₃O)₃, 5] in 70–88% yields. Complexes 2–5 were characterized by spectroscopy and single crystal X-ray diffraction analysis. The phosphorus of 2–5 is in an apical position of the distorted octahedral geometry of iron.     

Isolation of a Cationic Platinum(II) σ‐Silane Complex

The platinum complex [Pt(I^tBuⁱPr′)(I^tBuⁱPr)][BAr^F] interacts with tertiary silanes to form stable (<0 °C) mononuclear Pt^II σ‐SiH complexes [Pt(I^tBuⁱPr′)(I^tBuⁱPr)(η¹‐HSiR₃)][BAr^F]. These compounds have been fully characterized, including X‐ray diffraction methods, as the first examples for platinum. DFT calculations (including electronic topological analysis) support the interpretation of the coordination as an unusual η¹‐SiH. However, the energies required for achieving a η²‐SiH mode are rather low, and is consistent with the propensity of these derivatives to undergo Si?H cleavage leading to the more stable silyl species [Pt(SiR₃)(I^tBuⁱPr)₂][BAr^F] at room temperature.     

tBu2P?PP(X)tBu2-Ylide (X = Cl,Br, I) durch Halogenierung von [tBu2P]2P?SiMe3

tBu₂P? P?P(X)tBu₂ Ylides (X = Cl, Br, I) by Halogenation of [tBu₂P]₂P? SiMe₃ [tBu₂P]₂P? SiMe₃ 1 with halogenating agents as Br₂, I₂, Br-succinimide, CCl₄, CBr₄, CI₄ or C₂Cl₆ via cleavage of the Si? P bond in 1 produces the ylides tBu₂P? P?P(X)tBu₂ (X = Cl, Br, I). This proceeds independent from the formerly known pathway – [tBu₂P]₂PLi + 1,2-dibromoethane – and shows that the Li-phosphide must not be present as a necessary requirement for the formation of ylides.     

Steric effects on the dialkyl substituted X2C2Si silylenes: A theoretical study

With the aim of recognizing the steric effects on the silylenic H₂C₂Si structures, ab initio and DFT calculations are carried out on 24 structures of X₂C₂Si (where X is hydrogen (H), methyl (Me), isopropyl (i‐pro), and tert‐butyl (tert‐Bu)). These species are at either triplet (t) or singlet (s) states. They are confined to the following three sets of structures ( 1 _X, 2 _X and 3 _X). Structures 1 _X include silacyclopropenylidenes ( 1 _s‐H and 1 _t‐H) and their 2,3‐disubstituted derivatives ( 1 _t‐Me, 1 _s‐Me; 1 _t‐i‐pro, 1 _s‐i‐pro; 1 _{t‐tert‐Bu}, 1 _{s‐tert‐Bu}). Structures 2 _X include vinylidenesilylenes ( 2 _s‐H and 2 _t‐H) and their 3,3‐disubstituted derivatives ( 2 _t‐Me, 2 _s‐Me; 2 _t‐i‐pro, 2 _s‐i‐pro; 2 _{t‐tert‐Bu}, 2 _{s‐tert‐Bu}). Structures 3 _X include ethynylsilylenes ( 3 _s‐H and 3 _t‐H) and their 1,3‐disubstituted derivatives ( 3 _t‐Me, 3 _s‐Me; 3 _t‐i‐pro, 3 _s‐i‐pro; 3 _{t‐tert‐Bu}, 3 _{s‐tert‐Bu}). Singlet–triplet energy separations (Δ E_{s‐t, X}) and relative energies for the above structures are acquired at HF/6‐31G*, B₁LYP/6‐31G*, B3LYP/6‐31G*, MP2/6‐31G*, HF/6‐31G**, B1LYP/6‐31G**, B3LYP/6‐31G**, and MP2/6‐31G** levels of theory. The highest Δ E_{s‐t, X} is encountered for 1 _X. All singlet states of X₂C₂Si, are more stable than their corresponding triplet states. Linear correlations are found between the LUMO–HOMO energy gaps of the singlet 1 _s‐X and 2 _s‐X with their corresponding singlet–triplet energy separations calculated at B3LYP/6‐31G**. The seven structures 2 _s‐Me, 2 _t‐Me, 3 _s‐Me, 1 _t‐Me, 1 _s‐Me, 1 _{s‐tert‐Bu}, and 3 _{t‐tert‐Bu} do not appear to be real isomers. Different stability orders are obtained as a function of the substituents (X). The order of stability for six isomers of H₂C₂Si is 1 _s‐H > 2 _s‐H > 3 _s‐H > 2 _t‐H > 3 _t‐H > 1 _t‐H. Replacing hydrogen atoms by methyl group (X = Me) presents a new stability order: 1 _s‐Me > 3 _s‐Me > 2 _s‐Me > 3 _t‐Me > 2 _t‐Me > 1 _t‐Me; and for (i‐pro)₂C₂Si is 1 _s‐i‐pro > 2 _s‐i‐pro ≈ 3 _s‐i‐pro > 3 _t‐i‐pro ≈ 2 _t‐i‐pro > 1 _t‐i‐pro. Using the larger tert‐butyl group as a substituent (X), yet it offers a more different stability order for six structures of (tert‐Bu)₂C₂Si: 1 _{s‐tert‐Bu} > 3 _{s‐tert‐Bu} > 2 _{s‐tert‐Bu} > 3 _{t‐tert‐Bu} > 1 _{t‐tert‐Bu} > 2 _{t‐tert‐Bu}. Among eight levels employed, B3LYP/6‐31G** appears as the method of choice. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:619–633, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20204     

Reaktionen von tBu2P?PP(Br)tBu2 mit Phosphanen. Ein Weg zu unterschiedlich substituierten Phosphinophosphiniden-Phosphoranen

Reactions of ^tBu₂P? P?P(Br)^tBu₂ with Phosphanes A Route to Variously Substituted Phosphinophosphinidene-phosphoranes ^tBu₂P? P?P(Br)^tBu₂ 1 reacts with PR₃ [R₃ = Et₃, ^tBu₃, Ph₃, (NMe₂)₃, (NEt₂)₃, (NEt₂)₂Me, Me₂SiMe₃] according to ^tBu₂P? P?P(Br)^tBu₂ + PR₃ → ^tBu₂P? P?PR₃ + ^tBu₂PBr While 1 decomposes above ?30°C yielding ^tBu₂PBr and the cyclophosphanes (^tBu₂P)₃P₃ and (^tBu₂P)₄P₄, there is no condensation to give any cyclophosphanes from the intermediately formed ^tBu₂P? P in the presence of PR₃. The chlorophosphanes ^tBu₂PCl, ^tBuPPhCl, (Et₂N)₂PCl and Ph₂PCl as well as (CF₃)₂PBr react quite analogously to the above equation yielding ^tBu₂P? P?P(Cl)^tBu₂, ^tBu₂P? P?P^tBuPhCl, ^tBu₂P? P?P(NEt₂)₂Cl and ^tBu₂P? P?P(NEt₂)₂Br.     

Catalytic Ammonia Oxidation to Dinitrogen by Hydrogen Atom Abstraction

Catalysts for the oxidation of NH₃ are critical for the utilization of NH₃ as a large‐scale energy carrier. Molecular catalysts capable of oxidizing NH₃ to N₂ are rare. This report describes the use of [Cp*Ru(P^tBu₂N^Ph₂)(¹⁵NH₃)][BAr^F₄], (P^tBu₂N^Ph₂=1,5‐di(phenylaza)‐3,7‐di(tert‐butylphospha)cyclooctane; Ar^F=3,5‐(CF₃)₂C₆H₃), to catalytically oxidize NH₃ to dinitrogen under ambient conditions. The cleavage of six N?H bonds and the formation of an N≡N bond was achieved by coupling H⁺ and e^? transfers as net hydrogen atom abstraction (HAA) steps using the 2,4,6‐tri‐tert‐butylphenoxyl radical (^tBu₃ArO^.) as the H atom acceptor. Employing an excess of ^tBu₃ArO^. under 1 atm of NH₃ gas at 23 °C resulted in up to ten turnovers. Nitrogen isotopic (¹⁵N) labeling studies provide initial mechanistic information suggesting a monometallic pathway during the N???N bond‐forming step in the catalytic cycle.     

Reaktionen von (tBu)2P?PP(Br)tBu2 mit LiP(SiMe3)2, LiPMe2 und LiMe,LitBu, LinBu

Reactions of (tBu)₂P? P?P(Br)tBu₂ with LiP(SiMe₃)₂, LiPMe₂ and LiMe, LitBu and LinBu The reactions of (tBu)₂P? P?P(Br)tBu₂ 1 with LiP(SiMe₃)₂ 2 yield (Me₃Si)₂P? P(SiMe₃)₂ 4 and P[P(tBu)₂]₂P(SiMe₃)₂ 5 , whereas 1 with LiPMe₂ 2 yields P₂Me₄ 6 and P[(tBu)₂]₂PMe₂ 7 . 1 with LiMe yields the ylid tBu₂P? P?P(Me)tBu₂ (main product) and [tBu₂P]₂PMe 15 . In the reaction of 1 with tBuLi [tBu₂P]₂PH 11 is the main product and also tBuP? P?P(R)tBu₂ 21 is formed. The reaction of 1 with nBuLi leads to [tBu₂P]₂PnBu 17 (main product) and tBu₂P? P?P(nBu)tBu₂ 22 (secondary product).     

Komplexchemie P-reicher Phosphane und Silylphosphane. XIII [1]. [η2-{tBu2P?PPtBu2} PtBr(PPh3)]

Coordination Chemistry of P-rich Phosphanes and Silylphosphanes. XIII [1]. [η²-{^tBu₂P? P?P^tBu²} PtBr(PPh₃)] [η²-{^tBu₂P? P?P^tBu₂} PtBr(PPh₃)] 1 is the first transition metal complex compound resulting from a phosphino-phosphinidene-phosphorane. The yellow crystals of 1 (fp. 201–203°C, decomp.) were obtained by reacting ^tBu₂P? P?P(Br)^tBu₂ with either (Ph₃P)₂Pt · C₂H₄, or with Pt(PPh₃)₄, resp. Compound 1 crystallizes triclinic in the space group P1 (no. 2) with a = 1076.80(8) pm, b = 1344.61(8) pm, c = 1381.16(9) pm, α = 81.773(6)°, β; = 85,110(8), γ = 88,776(7).     

A mixed‐valence chloride‐bridged (pincer)IrIII–(diene)IrI complex

The title compound, [2,6‐bis(di‐tert‐butylphosphino)phenyl‐1κ³P,C¹,P′]di‐μ‐chlorido‐1:2κ⁴Cl:Cl‐(2η⁴‐cycloocta‐2,5‐diene)hydrido‐1κH‐diiridium(I,III) hexane hemisolvate, [Ir₂(C₈H₁₂)(C₂₄H₄₃P₂)Cl₂H]·0.5C₆H₁₄ or [(^tBuPCP)IrH(μ₂‐Cl)₂Ir(COD)][^tBuPCP is κ³‐2,6‐(^tBu₂PCH₂)₂C₆H₃ and COD is η⁴‐2,5‐cyclooctadiene], is an Ir^III/Ir^I dimer bridged by two chloride ions. The Ir₂Cl₂ framework is nearly planar, with a dihedral angle of 13.04 (4)° between the two Ir centers. The compound was isolated as a hexane hemisolvate. A list of distances found in Ir(PCP) compounds is given.     

4-Phosphoranylidene-5(4H)-oxazolones — A novel synthesis and properties

Summary 4-Phosphoranylidene-5(4H)-oxazolones (2), a hardly known class of phosphorus ylides, were readily prepared from 4-unsubstituted-5-(4H)-oxazolones (1) by treatment with Ph₃P-Br₂, Bu₃P-Br₂, Ph₃P-CCl₄, or Ph₃P-CBr₄ adducts in the presence of triethylamine in CH₂Cl₂ at room temperature in a novel, efficient one-pot procedure. The spectroscopic properties of the ylides are reported and discussed.

---

4-Phosphoranyliden-5(4H)-oxazolone — Eine neue Synthese und Eigenschaften

Zusammenfassung 4-Phosphoranyliden-5(4H)-oxazolone, eine sehr wenig bekannte Gruppe der Phosphor-ylide, wurden auf einfache Weise nach einem neuen Eintopfverfahren mit guten Ausbeuten hergestellt. Als Ausgangsverbindungen wurden 4-unsubtituierte-5-(4H)-Oxazolone (1) eingesetzt, die unter der Einwirkung von Addukten wie Ph₃P-Br₂, Bu₃P-Br₂, Ph₃P-CCl₄ oder Ph₃P-CBr₄ in Anwesenheit von Triethylamin in CH₂Cl₂ bei Zimmertemperatur die Titelverbindungen liefern. Die spektroskopischen Eigenschaften der Ylide werden berichtet und diskutiert.