Synthesis of saccharide-conjugated polyamides by quasi-living anionic polymerization of a bicyclic lactam

Several well-defined graft copolymers ( 7 ) having a water-soluble natural polysaccharide (dextran) stock and hydrophilic polyamide branches of different molecular weights were synthesized by using a quasi-living anionic polymerization of a bicyclic lactam 1 , namely by the reaction of the acyllactam group in the quasi-living polyamide 2 with the hydroxyl and amino groups in the dextran derivative ( 6 ), of which the reducing end was converted to an amino group. An oligosaccharide-terminated polyamide 3 was also prepared efficiently by similar coupling reaction of the corresponding quasi-living polyamide 2 , with the maltose derivative ( 5 ) having an amino group. © 1994 John Wiley & Sons, Inc.     

Synthesis of hydrophilic polyamide from L-tartarate and diamines by active polycondensation

Dimethyl L-tartarate underwent polycondensation reaction with hexamethylenediamine in solutions at 30°C to form polyamide having pendent hydroxyl groups. Solvents had a great influence on polymer yields and diglyme, tetrahydrofuran (THF) or dimethylsulfoxide (DMSO) were favorable in respect of polymer yields. Solution viscosities of resulting polyamide were as low as 0.1 to 0.2. However, post-polycondensation of the precursor polyamide at solid phase yielded hydrophilic polyamide having film-forming ability. The polyamide decomposed at 210°C by heating.     

Active polycondensation of diethyl 2,3,4,5-tetrahydroxyadipate with diamines

Polycondensation of diethyl 2,3,4,5-tetrahydroxyadipate with various diamines was carried out in solutions under mild conditions. The polycondensation reaction occurred rapidly even at room temperature in polar solvents such as alcohols, and in aqueous solution a cyclic product was obtained instead of linear polymers although the reaction with diamines was completed within several minutes. Polymers obtained from diethyl 2,3,4,5-tetrahydroxyadipate were a linear polyamide having pendant hydroxyl groups, which decomposed on heating at around 200°C. A solid-phase polycondensation of the precursor polyamide yielded a high molecular weight polyamide.     

Effect of solvent on the reactivity of functional groups in polycondensation reactions

The effect of solvent on solution or interfacial polycondensations was investigated in terms of selectivity and control of functional groups such as amine or hydroxyl groups toward polycondensation reactions. Solution polycondensation of a mixture of resorcinol (RL) and m-xylyenediamine (m-XD) with isophthaloyl chloride was affected by solvents to such extent as to change the course of the polycondensation reaction, and hexamethylenephosphoramide (HMPA) caused the formation of amide-rich polymer, while tetrahydrofuran (THF) was a solvent favoring formation of a polyamide ester with a regular structure. Polycondensation of 3,3′-dihydroxybenzidine (DHB) with isophthaloyl chloride yielded exclusively a linear polyamide in HMPA solution, while with aldehyde as a solvent polyester was obtained owing to the preservation of the amine group. Thus, it was found that the course of polycondensation reactions of monomers having different functional groups could be controlled by selection of a suitable solvent.     

THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES

This review is a concise survey about the works in our laboratory on the polymerization of aromatic and heterocyclic dinitriles, including the polymerization kinetics and mechanism, synthesis of heterocyclic dinitriles, the structure of polymers, and the correlation between the structures of dinitriles and polymerization rates and thermal performances of Polymers.     

AB_2型β-环糊精功能单体及其水溶性超支化聚合物的合成与表征

为了得到结构确定的β-环糊精大单体并用于超支化聚合,通过对β-环糊精上6位伯羟基和2位仲羟基的多步功能化改性得到了同时含有Si—H和—CH CH2基团的AB2型β-环糊精大单体,并利用硅氢加成反应一步法合成了一种新型的水溶性超支化聚合物,其具有β-环糊精空腔和超支化空穴两种疏水单元,从而可构建出一种新颖的超分子体系.采用1H-NMR、13C-NMR、飞行时间质谱和元素分析对AB2单体及其聚合物的结构进行了表征.结果表明,单体和聚合物的结构与所设计的分子结构相符合.凝胶渗透色谱/多角度激光光散射(SEC/MALLS)联用仪测得该聚合物的数均分子量、分子量分布及特性黏数分别为36690、1.887和15.8mL/g.     

Vinyl polymerization. 432. Initiation mechanism of uncatalyzed polymerization in the presence of copper(II) ion

The initiation mechanisms of the uncatalyzed polymerization of methyl acrylate and methyl methacrylate by the system of starch, α-amylase or water-soluble nylon 3/copper(II) ion/H₂O were investigated by spin trapping techniques. Using 2,4-dimethyl-3-nitrosobenzene sulfonate d₈ and 5,5-dimethyl-1-pyrroline-N-oxide as the water-soluble spin trapping agents, the simultaneous generation of both monomer and hydroxyl radicals has been observed, and the propriety of the initiation mechanism proposed previously was confirmed. Thus, the initiation of polymerization in the presence of copper(II) ion was concluded to take place through a hydrogen atom transfer from the complexed water to the β-carbon of the complexed monomer.     

Polyimides derived from bismethylolimides. I. Polyamide–imides from bismethylolimides and dinitriles

New polyamide–imides were synthesized from bismethylolimides and dinitriles. The bismethylolimides, N,N′-bismethylolpyromellitdiimide and N,N′-bismethylolbenzophenonete-tracarboxylic diimide, were prepared by the hydroxymethylation of the corresponding diimides with formaldehyde. The polymerization reaction was carried out in either concentrated sulfuric acid or poly(phosphoric acid), and the former was found to be superior to the latter. The polyamide–imides had inherent viscosities in the 0.08–0.41 dl/g range. Most of these polymers were soluble in m-cresol and dichloroacetic acid. The thermal stability of the polymers was examined by thermogravimetric analysis, and they were found to start to decompose at 275–350°C in air.     

末端带有溴甲基基团的柱状树枝化聚酰胺的合成与表征

采用大分子单体的方法合成了一种含大量溴甲基官能团端基,主链和侧链均为聚酰胺的功能化柱状树枝化聚酰胺.氯化亚砜的新活化工艺使整个合成过程不需要保护和去保护的步骤且减少了副反应的产生,从而使得合成和纯化更加简单.产物的结构通过红外和核磁得到了证实.由分子量测试知,聚酰胺的重均分子量(Mw)为5.01×104,分子量分布为2.74.由溶解性测试知,该聚合物能溶解于N,N′-二甲基甲酰胺、N,N′-二甲基乙酰胺、二甲亚砜、1-甲基-2-吡咯烷酮和硫酸等溶剂,溶解性能得到了大大的提高,主要是由于侧链树枝化单元和末端溴甲基存在的缘故.由粘度测试知,该聚酰胺的粘度低,主要是由于侧链树枝化单元的屏蔽效应.该聚合物的热性能也由TGA测试得到了表征,结果表明该聚酰胺具有良好的热性能.由于该聚酰胺外端具有大量的溴甲基基团,它可以作为原子转移自由基聚合反应的引发剂来合成大型的梳形聚合物,另外通过把它外围的溴甲基转化为其它的功能化基团,可以使它应用于其它更广的领域.     

Enzymatic nitrile hydrolysis catalyzed by nitrilase ZmNIT2 from maize. An unprecedented β-hydroxy functionality enhanced amide formation

To explore the synthetic potential of nitrilase ZmNIT2 from maize, the substrate specificity of this nitrilase was studied with a diverse collection of nitriles. The nitrilase ZmNIT2 showed high activity for all the tested nitriles except benzonitrile, producing both acids and amides. For the hydrolysis of aliphatic, aromatic nitriles, phenylacetonitrile derivatives and dinitriles, carboxylic acids were the major products. Unexpectedly, amides were found to be the major products in nitrilase ZmNIT2-catalyzed hydrolysis of β-hydroxy nitriles. The hydrogen bonding between the hydroxyl group and nitrogen in the enzyme-substrate complex intermediates that disfavors the loss of ammonia and formation of acyl-enzyme intermediate, which was further hydrolyzed to acid, was proposed to be responsible for the unprecedented β-hydroxy functionality assisted high yield of amide formation.     

芳杂环二腈及其聚合物——Ⅵ.含5-氰基苯并噻唑环的二腈的合成及聚合

合成了下列三个含5-氰基苯并噻唑环的二腈:研究了它们的聚合反应并测定了所得聚合物的热氧化稳定性,结果表明皆与其结构相类似的含6-氰基苯并噻唑环的二腈相似。     

Synthesis and Polymerization of a New Class of Oligosaccharide-and Polyamide-Macromers Having a Styrene End-Group

As an approach to synthesis of oligo- and polysaccharide-containing polymers, two types of polystyrenes having pendant carbohydrate groups were prepared. Their functions, especially amphiphilic behaviors in water, were revealed.

A new polyamide macromer having a vinylbenzyl group (M_n 3000-3800) was prepared by the anionic polymerization of bicyclic oxalactam followed by the reaction with p-vinylbenzylamine. Another polyamide macromer telechelated with amino groups (M_n, 1400 and 4100) was also prepared by the similar method.     

Preparation of 3,5-diethoxycarbonyl-2,6-dimethyl-1,4-dihydro-isonicotinic acid and 3,5-diacetyl-2,6-dimethyl-1,4-dihydroisoni-cotinic acid and their salts

The reaction of glyoxylic acid with ethyl β-aminocrotonate or acetyl-acetone imine has given the corresponding derivatives of 1, 4-dihydro-isonicotinic acid and their water-soluble salts.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS. Ⅺ. STUDY ON THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES BY INFRARED SPECTROSCOPY*

The polymerization rates of fourteen aromatic and heterocyclic dinitriles were measured by infraredspectroscopy and compared with that of 4, 4′-biphenyldicarbonitrile. The rate is greatly enhancedwhen an electron withdrawing group is substituted at the para position of cyano group in aromaticdinitriles. The polymerization rates of heterocyclic dinitriles wer discussed in terms of π-lectrondensity of the heterocyclic rings.     

Effect of substituent distribution on water solubility of O-methylcellulose

The effect of substituent distribution on the water solubility of O-methylcellulose (MC) was re-examined to elucidate the lower limit of the degree of substitution (DS) in water-soluble MC. To this end, a series of 2,3-MCs which are regioselectively substituted at the C-2 and C-3 hydroxyl groups were prepared by homogeneous methylation. It was found that the lower limit for the DS value of water-soluble 2,3-MC was almost the same as that for MCs having even distributions of substituents along the cellulose chain as well as in the anhydroglucose units. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and Fe(III)‐complexation ability of polyurethane bearing kojic acid skeleton in the main chain prepared by polyaddition of aliphatic hydroxyl groups without protection of phenolic hydroxyl groups

Polyaddition of a kojic acid dimer and diisocyanates yielded polyurethane with metal‐coordination ability owing to the phenolic hydroxyl groups of kojic acid. Although the kojic acid dimer contains two phenolic and two aliphatic hydroxyl groups, 1,5‐diazabicyclo[4.3.0]non‐5‐ene catalyzed polymerization proceeded through highly selective reactions of the aliphatic hydroxyl groups without any protection of the phenolic hydroxyl groups. The resulting polymers complexed with FeCl₃, and specific colorizations were observed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel synthesis of photocrosslinkable polymers

A new preparative route to photocrosslinkable polymers in which the polymers are produced directly from the polymerization of vinyl monomers having photocrosslinkable groups has been investigated. The photosensitive resins thus produced have higher sensitivity and resolution than conventional photosensitive resins. The monomers were synthesized from the esterification of vinylphenols or vinyl β-chloroethyl ether with cinnamic acid, β-styrylacrylic acid, and their homologs, and from the etherification of vinyl β-chloroethyl ether with hydroxychalcones. Homopolymerizations of these monomers and their copolymerizations with other comonomers were investigated with the use of both radical and ionic initiators. It is shown that radical polymerization of the monomers gave soluble polymers only at low conversion. Anionic initiators did not initiate polymerization. Cationic polymerization imparted soluble polymers in high yield, except for the monomers bearing cyano groups, which generally gave insoluble polymers. Infrared and NMR spectroscopic investigation of the cationically obtained soluble polymers and comparative investigation by cationic polymerization of model compounds indicated that polymerization of the monomers proceeds through the vinyl double bond without affecting the photosensitive unsaturated bond. Thus, linear photocrosslinkable polymers with an intact photoreactive group may be produced by cationic polymerization. In general, these polymers have uniform structure and modifiable physical properties depending on the monomer used. The polymer thus obtained from β-vinyloxyethyl cinnamate has been shown to have excellent properties for use as a photo-resist.     

Synthesis and simple separation of β-pyrrole sulfonated porphycenes

New water-soluble porphycenes having sulfonic acid groups at the β-pyrrolic positions were synthesized and characterized by UV-vis, NMR, IR, and mass spectroscopy as well as elemental analyses. The series of mono- to tri-sulfonato derivatives were simply separated by the extraction method.     

Polymers Containing Lactone Groups

Polymers containing intact lactone groups are a new class of macromolecules with reactive groups, which are relatively easy to obtain by polymerization, polycondensation and polyaddition, as well as by reactions on existing macromolecules. Polymers with β-lactone Groups in particular can enter into numerous addition reactions, which can be used, for example, to obtain macromolecules containing hydroxy acid or amino acid groupings. The reactions proceed under mild conditions, and can even be carried out in aqueous media, frequently giving water-soluble polymers. The polymers can be cross-linked at low temperatures, even from the aqueous phase, by the addition of bifunctional or oligofunctional reagents. Polymers containing β-lactone groups can also be used as a basis for graft co-polymers; polyester or polyether branches can be grafted on, depending on whether monomeric lactones or monomeric epoxides are used.     

Functionalization of monodisperse magnetic nanoparticles

We report a new strategy for the preparation of monodisperse, water-soluble magnetic nanoparticles. Oleic acid-stabilized magnetic nanocrystals were prepared by the organic synthesis route proposed by Sun et al. (J. Am. Chem. Soc. 2004, 126, 273.), with size control obtained via seeded-mediated growth. The oleic groups initially present on the nanoparticle surfaces were replaced via ligand exchange reactions with various capping agents bearing reactive hydroxyl moieties. These hydroxyl groups were (i) exploited to initiate ring opening polymerization (ROP) of polylactic acid from the nanoparticle surfaces and (ii) esterified by acylation to permit the addition of alkyl halide moieties to transform the nanoparticle surfaces into macroinitiators for atom transfer radical polymerization (ATRP). By appropriate selection of the ligand properties, the nanoparticle surfaces can be polymerized in various solvents, providing an opportunity for the growth of a wide variety of water-soluble polymers and polylectrolyte brushes (both cationic and anionic) from the nanoparticle surfaces. The nanoparticles were characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), electron microscopy, and light scattering. Light scattering measurements indicate that the nanoparticles are mostly present as individual nonclustered units in water. With pH-responsive polymers grown on the nanoparticle surfaces, reversible aggregation of nanoparticles could be induced by suitable swings in the pH between the stable and unstable regions.