负载型镍基非晶态催化剂催化氯代硝基苯加氢合成氯代苯胺

分别以碳纳米管(CNTs), SiO_2, TiO_2, γ-Al_2O_3, TiO_2-SiO_2和活性炭(AC)为载体(M),以Ni和B为活性组分,采用浸渍-化学还原法制备了一系列负载型Ni-B非晶态合金催化剂(Ni-B/M).采用电感耦合等离子体光谱(ICP), XRD, TEM和DSC研究了Ni-B/CNTs的非晶性质,Ni的担载量及其热稳定性.将Ni-B/M用于催化三种氯代硝基苯液相加氢合成氯代苯胺的反应.结果表明,Ni-B/M在反应中表现出较高的活性和良好的选择性,其中Ni-B/CNTs可使三种氯代硝基苯的转化率均高于99.8%,加氢脱氯率小于3%.讨论了CNTs和Ni-B之间的相互作用对催化剂性能的影响.     

多壁碳纳米管负载铂的甲苯加氢脱芳催化剂

以多壁碳纳米管(CNTs)为载体制备了负载型Pt催化剂Pt/CNTs并将其用于催化甲苯加氢脱芳(HDA)反应.结果表明,在1.0%Pt/CNTs催化剂上,在0.4MPa,373K,PhCH3/H2摩尔比=6/94和GHSV=120L/(h.g)的反应条件下,甲苯转化率可达100%,比反应速率为0.0523mmol/(s.m2),分别是γ-Al2O3和AC负载各自最佳Pt负载量催化剂1.4%Pt/γ-Al2O3和2.4%Pt/AC上相应值的1.17和1.18倍.甲苯加氢产物全部为甲基环己烷,其他可能的加氢产物均在气相色谱检测限以下.催化剂的表征研究揭示,用CNTs代替γ-Al2O3或AC作为载体并不会引起所负载Pt催化剂上甲苯HDA反应的表观活化能发生明显变化.与γ-Al2O3或AC负载的相应催化剂相比,一方面,CNTs负载的Pt催化剂易于在较低温度下还原活化,并且其工作态催化剂表面催化活性Pt物种(Pt0)所占表面Pt摩尔分率有所提高;另一方面,CNTs负载的Pt催化剂对H2具有较高的吸附/活化和储存能力.这些促进效应对催化剂HDA活性的提高都有重要贡献.     

碳纳米管/FeS类Fenton催化剂的制备及催化性能

以浮动催化热分解法制备碳纳米管(CNTs), 采用氧化-还原-硫化的方法制备了CNTs/FeS催化剂, 采用X射线衍射(XRD)、 透射电子显微镜(TEM)和热重(TG)分析等技术对催化剂进行了结构表征. 将CNTs/FeS作为类Fenton催化剂用于水中环丙沙星的去除, 研究了降解过程中H₂O₂浓度、 CNTs/FeS催化剂的投加量、 环丙沙星浓度及pH等因素对催化降解性能的影响. 结果表明, CNTs/FeS类Fenton催化反应在H₂O₂浓度为20 mmol/L和CNTs/FeS催化剂的投加量为10 mg的条件下具有最优的降解效果, 其催化反应过程符合一级动力学方程, 且具有更加宽泛的pH适应范围(pH=3~8), 同时, CNTs/FeS类Fenton催化剂在使用寿命方面也具有一定的优势.     

碳纳米管纯化对Pt/CNTs催化甲醇电化学氧化活性的影响

探索了一种适用于Pt/CNTs催化剂的纯化方法.利用比表面积测定、X射线衍射(XRD)、透射电子显微镜(TEM)和电化学等手段进行了表征.研究结果表明,经该方法纯化的CNTs作为载体制备的阳极催化剂表现出明显优于相应的混酸氧化法纯化的CNTs为载体的催化剂催化性能.     

处理方法对多壁碳纳米管结构及负载Ru催化剂氨分解反应活性的影响

分别用H_2O_2、强碱(NaOH、 KOH)和强酸HNO_3处理CNTs.以处理后的CNTs为载体、通过浸渍RuCl_3水溶液结合高温H_2还原制备Ru/CNTs催化剂,并将其应用在氨分解催化反应中.利用XRD、 TPR、 TPD-MS表征手段研究了Ru在CNTs表面的分散、还原性能及CNTs表面化学基团,探究催化剂结构-性能间构效关系.结果表明,强碱及双氧水处理CNTs,为其表面引入了数量适宜的羧基、酸酐、酚等官能团,而传统硝酸处理则引入了大量的羧基、酸酐、酯、内酯、酚、醌和羰基等官能团,对CNTs本征结构性质影响很大.经强碱及双氧水处理CNTs上负载Ru后所得催化剂的效果明显优于传统硝酸处理CNTs上负载Ru催化剂.我们发展的CNTs的新型处理方法为研制高活性Ru/CNTs催化分解氨催化剂提供了新的思路.     

Pt/CeO2/CNTs催化剂对甲醇电催化氧化的研究

通过微波乙二醇法制备了Pt/CeO2/CNTs催化剂用于碱性体系中的甲醇电催化氧化,考察了不同的CeO2含量对其电催化活性的影响.X射线衍射(XRD)和透射电镜(TEM)结果表明,Pt/CeO2/CNTs催化剂中Pt颗粒较小,在载体上分散性较好.循环伏安曲线和计时电流测试结果表明,Pt/CeO2/CNTs催化剂表现出良...     

有序介孔二氧化硅-碳纳米管复合材料载Pt 及其电催化性能

以十六烷基三甲基溴化铵(CTAB)为结构导向剂, 正硅酸乙酯(TEOS)为硅源, 通过添加碳纳米管(CNTs), 制备介孔二氧化硅包覆碳纳米管网状结构的复合材料(C/Si). X 射线衍射(XRD)和透射电子显微镜(TEM)显示, 介孔二氧化硅的孔道结构高度有序, CNTs 均匀分散于二氧化硅刚性骨架中. 以其为载体微波负载制备了Pt-C/Si-x 纳米粒子催化剂,研究了催化剂在硫酸和甲醇溶液中电催化性能, 结果表明, 具有较高导电性能的复合材料保持了二氧化硅的均匀的孔道结构有利于电解液存储和质子传输, 使得该催化剂显示了良好的电催化活性. 其中碳纳米管添加含量为40 mg 时,催化剂在H₂SO₄ 电解液中的电化学活性面积高达120.9 m²·g^-1, 远大于Pt/CNTs 的电化学活性面积, 对甲醇的催化峰电流也达80.3 mA·cm^-2. 预示其作为直接甲醇燃料电池催化剂载体具有良好的应用前景.     

Ni-Fe/4A分子筛催化剂可控制备大内径碳纳米管

以乙醇为碳源,Ni-Fe/4A分子筛为催化剂,采用化学气相沉积法制备大内径碳纳米管(LIDCNTs)。研究了Ni/Fe的物质的量比(n_Ni∶n_Fe)、碳纳米管(CNTs)的制备温度、催化剂的煅烧温度和4A分子筛载体对CNTs内径的影响。采用TEM、SEM、XRD和BET对LIDCNTs和还原后的催化剂进行了分析。结果显示,LIDCNTs的内径随着CNTs的制备温度、催化剂的煅烧温度的升高和n_Ni∶<     

石墨烯负载镍催化CO_2加氢甲烷化

采用改进的Hummers法制备了氧化石墨烯(GO),经水合肼还原得到石墨烯(RGO),通过浸渍法制备了石墨烯负载的镍基催化剂(Ni/RGO);对其催化二氧化碳甲烷化反应的性能进行了研究,并与以碳纳米管(CNTs)和活性炭(AC)为载体负载的Ni基催化剂进行了比较.由于催化剂的载体分别为RGO,CNTs和AC,所以Ni将会表现出不同的形态.利用红外光谱(FTIR)、比表面积(BET)测试、程序升温还原(H2-TPR)、X射线衍射(XRD)分析和透射电子显微镜(TEM)等表征手段对其结构及物理性质进行了表征.结果表明,Ni/RGO具有相对较大的比表面积(316 m~2/g),Ni在Ni/RGO上的颗粒尺寸(5.3 nm)小于其在Ni/CNTs(8.9 nm)和Ni/AC(11.6 nm)上的颗粒尺寸;该催化剂在二氧化碳甲烷化反应中具有更高的催化活性和选择性,而且具有良好的使用寿命.     

Ir/CNTs催化剂的制备及对氨的电催化氧化

分别以碳纳米管(CNTs)和XC-72活性碳为载体制备了Ir/CNTs和Ir/C催化剂. X射线衍射(XRD)结果显示, CNTs拥有更高的石墨化程度. 电化学研究结果表明, 与Ir/C催化剂相比, Ir/CNTs对氨氧化具有更高的电流密度、更低的起始氧化电位和更好的稳定性. 同时, Ir/CNTs催化剂对氨检测的线性范围更宽, 灵敏度更高, 检出限更低.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.