Determination of Retention Factors of s-Triazines Homologous Series in Water Using a Numerical Method Basing on Ościk's Equation

The retention factors in pure water for a homologous series of s-triazines were calculated by a numerical method basing on Ościk's equation and were correlated with log k _w values obtained by linear and parabolic extrapolation. Chromatographic data (log k _w ) were compared with the software-calculated partition coefficients in the n-octanol/water system (Alog P, IAlog P, clog P, log P _Kowin , xlog P, log P _ACD and log P _Chem.Off.) as alternative hydrophobicity indices. The effect of organic modifier (methanol and acetonitrile) and its concentration in the mobile phase used for log k _w evaluation were investigated. Very good linear correlations were found between log k _w values calculated by the numerical method and log P _ACD , log P _Chem.Off . and clog P values, independent of organic modifier type.

     

Determination of lipophilicity for antitumor acridinone derivatives supported by gradient high-performance liquid chromatography method

The lipophilicity values of selected acridinone (imidazoacridinone and triazoloacridinone) derivatives were measured by gradient reversed-phase high-performance liquid chromatography (RP-HPLC) using a C18 stationary phase with a water/acetonitrile mixture as a mobile phase. The retention times obtained served as input data and appropriate log k_w values (i.e., the retention factor log k_w extrapolated to 0% organic modifier) as an alternative to log P were calculated using the DryLab program. The relationships between the lipophilicity (log k_w) and the chemical structure of the studied compounds, as well as correlation between experimentally determined lipophilicities (log k_w) and log P data calculated using some commonly available software, are discussed.     

Exploring the elution mechanism of selenium species on liquid chromatography

In the present work, the chromatographic behavior of eight selenium species, namely selenites (Se(IV)), selenates (Se(VI)), seleno‐DL ‐methionine (Se‐Met), selenocystine (Se‐Cyst), selenocystamine (Se‐CM), selenourea (Se‐U), dimethylselenide ((CH₃)₂Se) and dimethyldiselenide ((CH₃)₂Se₂), was investigated under different stationary and mobile phase conditions, in an effort to unravel secondary interferences in their underlying elution mechanism. For this purpose, two end‐capped and a polar‐embedded reversed‐phase stationary phases were employed using different mobile phase conditions. Retention factors (log k_w) were compared with octanol–water distribution coefficients (log D) as well as with log k_w values on two immobilized artificial membrane (IAM) columns and two immobilized artificial plasma proteins stationary phases, obtained in our previous work. The role of electrostatic interactions was confirmed by introducing the net charge of the investigated Se species as an additional term in the log k_w/log D interrelation, which in most cases proved to be statistically significant. Principal component analysis of retention factors on all stationary phases and octanol–water log D values, however, showed that the elution of the investigated selenium species is mainly governed by partitioning mechanism under all different chromatographic conditions, while the pH of the mobile phase and the special column characteristics have only a minor effect.     

Investigation of the chromatographic behaviour of some selenium species—Comparison with their octanol-water partitioning

The retention behaviour of selenites (Se(IV)), selenates (Se(VI)), seleno-dl-methionine (Se-Met), selenocystine (Se-Cyst), selenocystamine (Se-CM) and selenourea (Se-U) was investigated using a Discovery end-capped reversed-phase column as stationary phase and different mobile phase conditions. Extrapolated to 100% aqueous mobile phase retention factors (log k_w) of the investigated Se species, determined using different methanol fractions (φ) as organic modifier, were compared with the corresponding actual values. The proper operation of this column even at 100% aqueous phase proved to be valuable for the accurate determination of log k_w values of Se-CM and Se-Cyst, presenting a convex curvature log k = f(φ) at low MeOH fractions, often neglected in the extrapolation procedure. The effect of the presence of n-decylamine as well as saturation of the mobile phase with n-octanol was also studied. For ampholytic Se-Met and Se-Cyst the effect of n-decylamine in retention reflected the predominance of zwitterionic nature in the case of Se-Met in contrary to the non-zwitterionic species found in the case of Se-Cyst, in accordance with our previous findings concerning partitioning experiments in the n-octanol/water system. Finally, an attempt was made to correlate log k_w values with the logarithm of n-octanol/water distribution coefficient, log D, of the investigated Se species and an indicative log D value of Se-U was derived.     

Dependence of the relative retention of compounds on the average pressure of helium as a carrier gas in capillary GLC

The dependence of retention factork _i , relative retention time α _i , and retention indexI _i of organic compounds on the average pressure (p _av) of the carrier gas (helium) was studied experimentally using a long narrow-bore capillary column with the SE-30 nonpolar phase at 120°C. The linear dependencesk _i =f(p _av), α _i =φ(p _av), andI _i =φ(p _av) obtained previously were found to be in good agreement with experimental data. Invariant relative retention valuesk _0,i , α _0,i , andI _0,i , which do not depend on the helium pressure, were determined for some organic compounds of various chemical classes. The dependence of the relative retention on the carrier gas pressure needs to be taken into account in precision measurements and in experiments with narrow-bore capillary columns. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 314–316, February, 1998.     

Vibrational spectroscopic study on the phase transition of water in nanospaces and at interfaces

Phase transition of water confined in nanospaces with charged inner-surfaces was investigated by vibrational spectroscopy. Aerosol sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles give a series of spherical nanospaces with controlled inner-radius (R_w) with nanometer-scale precision. Successive spectroscopic measurements of the confined water with decreasing temperature revealed that the water freezes to metastable cubic ice (I_c) coexisting with super-cooled water or unstable amorphous ice at the R_w ranging from 1.0 to 2.0 nm. When R_w exceeded 2.0 nm, stable hexagonal ice (I_h) dominated. The drastic change of the dominant ice structure with the increase of 1 nm in R_w shows that the thickness of water layers affected by the inner surface can be estimated to be ~1 nm, where three or four layers of water hydrated to the surface. It is worth noting that the clear phase transition behavior of the confined water vanishes at R_w = 1.2 nm and that the gradual formation of I_c and coexistence of super-cooled water or glassy state of water are detected. The range of the effective interaction between interfacial water and the charged inner surfaces and the mechanism of the extremely slow phase transition were also discussed.     

Reversed-Phase Systems for the Separation of Coumarins and Furocoumarins by Thin-Layer and High-Performance Liquid Chromatography

Abstract

The retention behaviour of eleven derivatives of counarin was investigated by reversed-phase (RP) thin-layer and high performance liquid chromatography. The linear relationships between log k'or R_M values and the content of organic modifier in the aqueous mobile phase obtained for wide composition ranges indicate that the plots can be used to determine R_Mw and log k_w values by extrapolation to pure water. The effects of individual substituants on the retention and the correlation between TLC and HPLC data was analysed.     

Determination of the lipophilicity of quinolinesulfonamides by reversed-phase HPLC and theoretical calculations

Reversed-phase high-performance liquid chromatography analyses were used for the determination of the retention factor (log k) of a set of quinolinesulfonamides. The analyses utilized a mixture of acetonitrile/water as the mobile phase. The log k values were linearly dependent on the concentration of acetonitrile and extrapolated to 100% water and gave the lipophilicity parameter log k_w. The parameter log P_HPLC was determined from log k_w values using the calibration curve obtained for five standards. The log P_HPLC parameters are discussed in terms of structure–lipophilicity relationships. Furthermore, the theoretical lipophilic parameters (log P_calc) for all compounds were calculated using chemical programs (e.g., Advanced Chemistry Development (ACD/ logP), miLogP, AlogP, ClogP, and Pallas). The determined log P_HPLC and calculated log P_calc values were compared by linear regression analysis.     

Kinetics and quantification of the electrophilic reactivities of substituted thiophenes and structure‐reactivity relationships

Second‐order rate constants (k₁) have been measured spectrophotometrically for reactions of 2‐methoxy‐3‐X‐5‐nitrothiophene 1a‐c (X = NO₂, CN, and COCH₃) with secondary cyclic amines (pyrrolidine 2a , piperidine 2b , and morpholine 2 c ) in CH₃CN and 91:9 (v/v) CH₃OH/CH₃CN at 20°C. The experimental data show that the rate constants (k₁) values exhibit good correlation with the parameters of nucphilicity (N) of the amines 2a‐c and are consistent with the Mayr's relationship log k (20°C) = s(E + N). We have shown that the electrophilicity parameters E derived for 1a–c and those reported previously for the thiophenes 1d‐g (X = SO₂CH₃, CO₂CH₃, CONH₂, and H) are linearly related to the pK_a values for their gem‐dimethoxy complexes in methanol. Using this correlation, we successfully evaluated the electrophilicity E values of 12 structurally diverse electrophiles in methanol for the first time. In addition, a satisfactory linear correlation (r² = 0.9726) between the experimental (log k_exp) and the calculated (log k_calcd) values for the σ‐complexation reactions of these 12 electrophiles with methoxide ion in methanol has been observed and discussed.     

Evaluation of N-Substituted 2,4-Dihydroxyphenylthioamide Fungicide Lipophilicity Using the Chromatographic Techniques HPLC and HPTLC

2,4-Dihydroxyphenylthioamide derivatives modified on the N-aryl ring have substantial fungicidal activity. To determine their quantitative structure–activity relationships their lipophilicity was determined by use of the chromatographic methods column liquid chromatography and thin-layer chromatography. Methanol–water systems were used as mobile phases and the linear dependences of retention (R_M and log k) on volume fraction of organic modifier, φ, were determined. This enabled precise determination of lipophilicity (R_Mw and log k_w) by extrapolation. Correlations were found between quantities characterizing the lipophilicity of the compounds. Deviations enabled discovery of compound structural features which increase or reduce lipophilicity. When these data were correlated with biological activity against the phytopathogenic fungi Alternaria alternata and Botrytis cinerea parabolic dependences were obtained.     

A novel evaluation method for extrapolated retention factor in determination of n-octanol/water partition coefficient of halogenated organic pollutants by reversed-phase high performance liquid chromatography

The retention factor corresponding to pure water in reversed-phase high performance liquid chromatography (RP-HPLC), k_w, was commonly obtained by extrapolation of retention factor (k) in a mixture of organic modifier and water as mobile phase in tedious experiments. In this paper, a relationship between log k_w and log k for directly determining k_w has been proposed for the first time. With a satisfactory validation, the approach was confirmed to enable easy and accurate evaluation of k_w for compounds in question with similar structure to model compounds. Eight PCB congeners with different degree of chlorination were selected as a training set for modeling the log k_w ? log k correlation on both silica-based C₈ and C₁₈ stationary phases to evaluate log k_w of sample compounds including seven PCB, six PBB and eight PBDE congeners. These eight model PCBs were subsequently combined with seven structure-similar benzene derivatives possessing reliable experimental K_ow values as a whole training set for log K_ow ? log k_w regressions on the two stationary phases. Consequently, the evaluated log k_w values of sample compounds were used to determine their log K_ow by the derived log K_ow ? log k_w models. The log K_ow values obtained by these evaluated log k_w were well comparable with those obtained by experimental-extrapolated log k_w, demonstrating that the proposed method for log k_w evaluation in this present study could be an effective means in lipophilicity study of environmental contaminants with numerous congeners. As a result, log K_ow data of many PCBs, PBBs and PBDEs could be offered. These contaminants are considered to widely exist in the environment, but there have been no reliable experimental K_ow data available yet.     

Use of biopartitioning micellar chromatography and RP-HPLC for the determination of blood–brain barrier penetration of α-adrenergic/imidazoline receptor ligands,and QSPR analysis

For this study, 31 compounds, including 16 imidazoline/α-adrenergic receptor (IRs/α-ARs) ligands and 15 central nervous system (CNS) drugs, were characterized in terms of the retention factors (k) obtained using biopartitioning micellar and classical reversed phase chromatography (log k_BMC and log k_wRP, respectively). Based on the retention factor (log k_wRP) and slope of the linear curve (S) the isocratic parameter (φ₀) was calculated. Obtained retention factors were correlated with experimental log BB values for the group of examined compounds. High correlations were obtained between logarithm of biopartitioning micellar chromatography (BMC) retention factor and effective permeability (r(log k_BMC/log BB): 0.77), while for RP-HPLC system the correlations were lower (r(log k_wRP/log BB): 0.58; r(S/log BB): –0.50; r(φ₀/P_e): 0.61). Based on the log k_BMC retention data and calculated molecular parameters of the examined compounds, quantitative structure–permeability relationship (QSPR) models were developed using partial least squares, stepwise multiple linear regression, support vector machine and artificial neural network methodologies. A high degree of structural diversity of the analysed IRs/α-ARs ligands and CNS drugs provides wide applicability domain of the QSPR models for estimation of blood–brain barrier penetration of the related compounds.     

Rapid method for determination of protein content in cereals and oilseeds: validation, measurement uncertainty and comparison with the Kjeldahl method

The objective of this research was to test suitability of the Dumas combustion method to completely substitute the Kjeldahl method in routine laboratory determination of crude protein content in cereals and oilseeds. The validation of the method demonstrated that it is able to determine crude protein content in cereals and oilseeds in an efficient and accurate manner, with a detection limit w(N) = 0.006%, quantification limit w(N) = 0.019%, repeatability precision RSD _r = 0.41%, intra-laboratory reproducibility precision RSD _R = 0.74%, trueness, expressed in terms of bias b = 0.43%, and linear response between (2.36–19.2) mg N. Measurement uncertainty, expressed as relative expanded uncertainty (coverage factor k = 2, confidence level 95%), was calculated from validation data (U _rel = 2.24%). In order to examine the relationship between two methods, 15 cereal grain and oilseed samples were analyzed using Dumas and Kjeldahl procedure. The Kjeldahl procedure gave slightly lower w(N) values than the Dumas procedure: w _K(N) = 0.9905 w _D(N) = 0.0376 (R ²  = 0.9996). Relative standard deviations and results of homogeneity test obtained during analysis of complex cereal products (cereal breakfast and muesli bars) show that the Dumas combustion method may be less suitable for analysis of such samples compared to Kjeldahl method.     

Nucleophilicities of Para‐Substituted Phenoxide Ions in Water and Correlation Analysis

Second‐order rate constants for the reactions of 2‐aryl‐4,6‐dinitrobenzotriazole 1‐oxides 1a‐d with some 4‐X‐substituted phenoxide ions 2a‐d (X = OCH₃, H, Cl, and CN) have been measured in aqueous solution at 20°C. The pK_a values for the σ‐complexation processes of a series of benzotriazole 1a‐d measured in water have been used to determine their electrophilicity parameters E according to the correlation E = –3.20 – 0.662 pK_a (F. Terrier, S. Lakhdar, T. Boubaker, and R. Goumont, J Org Chem, 2005 , 70, 6242–6253). For these reactions, plots of log k versus the electrophilicity parameters E of the benzotriazoles 1a‐d were linear, allowing to derive the nucleophilicity parameters N and s for phenoxide ions as defined by the Mayr equation log k₁ (20°C) = s (E + N) (H. Mayr, M. Patz. Angew Chem, Int Ed Engl 1994 , 33, 938–957). The N values are found to cover a range of nucleophilicity from 6.85 to 10.22, going from 4‐cyanophenoxide 2d for the least reactive ion to 4‐methoxyphenoxide 2a for the most reactive nucleophile. Good linear correlations were found between the nucleophilicity parameters N of phenoxide ions 2a‐d and the pK_a values of their conjugate acids (N = –3.05 + 1.25 pK_a) and the constants of the substituents X (N = 9.21 – 2.51).     

Chromatographic Evaluation of the Lipophilic Properties of Selected Pesticides

Monolinuron, chlortoluron, diuron, isoproturon, linuron, diflubenzuron, dimefuron, teflubenzuron, and lufenuron have been chromatographed on an RP-HPLC column and on RP-HPTLC plates with methanol–water in different volume proportions as mobile phases. The retention values log k, and R_M were extrapolated to zero methanol content. Chromatographic lipophilicities (log k_w, R_Mw, _o(HPLC), and _{o (TLC)}) were compared with measured (log P_exp) partition coefficients and with values (A log Ps, IA log P, C log P, log P_Kowin, and x log P) calculated by use of five different software products. The most significant correlations were found between the chromatographic lipophilicities and C log P values. Satisfactory linear correlation was also obtained between lipophilicity (log k_w, R_Mw) and the valence Gutman index (M).     

Chiral imidazole metalloenzyme models: Synthesis and enantioselective hydrolysis for α-amino acid esters

Chiral imidazole hydrolytic metalloenzyme models with characteristics of chiral centers directly link to imidazole N-atoms and varieties in both alkyl chain length and number of alkyl chains, have been synthesised and investigated for enantioselective hydrolysis of Boc-α-amino acid esters. The result indicates that both hydrolysis rates and enantioselectivities are increased with increases in the alkyl chain length and the number of the alkyl chains in the lipophilic chiral imidazole-type surfactants in many cases. The lipophilic chiral imidazole 4d ((S)-1-hexadecoxy-2-(1-imidazolyl)-propane), which has one long alkyl chain, shows higher hydrolysis rate and enantioselectivity (k_D = 132.5 × 10⁻⁵, k_D/k_L = 5.38), 5d ((S)-1,5-dihexadecoxy-2-(1-imidazolyl)-pentane), which has two long alkyl chains, shows the highest hydrolysis rate and enantioselectivity (k_D = 201.5 × 10⁻⁵, k_D/k_L = 11.72). Additionally, the effects of the metals, the additives, the solvents and the substrates on the hydrolysis rates and enantioselectivities are examined.     

Theoretical opportunities and actual limitations of pH gradient HPLC

In a series of reports published recently by our laboratory comprehensive theory and experimental conditions were established for reversed-phase high-performance liquid chromatography (RP HPLC) employing the programmed pH gradient of mobile phase. A procedure was developed providing, rapidly and conveniently, the acidity (pK_a) of weak acids and bases and their lipophilicity (hydrophobicity) log k_w. The basis of the double-gradient RP HPLC, employing simultaneous gradients of organic modifier content and mobile phase pH, was also elaborated. The fundamentals of the approach are presented briefly and systematically and its advantages and limitations are discussed. It is demonstrated that the newly introduced pH gradient method increases the analytical versatility of RP HPLC and our understanding of its physicochemical basis.     

Kinetics and mechanism of quinolinium dichromate mediated oxidation of sugar alcohols in Bronsted acid media

Bronsted acid catalyzed oxidation of certain sugar alcohols (polyols) has been studied by quinolinium dichromate (QDC) using aqueous sulfuric, perchloric, and hydrochloric acids at different temperatures. At constant acidity, reaction kinetics revealed the second-order kinetics with a first order in [Alcohol] and [QDC]. Zucker-Hammett, Bunnett, and Bunnett-Olsen criteria were used to analyze acid-dependent rate accelerations. Bunnett-Olsen plots of (log k + H_ν) versus (H_ν + log [H⁺]), and (log k) versus (H_ν + log [H⁺]) afforded slope values (ϕ and ϕ^*, respectively) > 0.47, suggesting that a water molecule acts as a prton transfer agent in the slow step of the mechanism in the oxidation of alcohols by QDC in the presence of aqueous sulfuric, perchloric, and hydrochloric acids.     

LC and Principal Component Analysis in the Lipophilicity Study of Seven Angiotensin II-AT1 Receptor Antagonists (Sartans)

Seven sartans have been chromatographed with acetonitrile-buffer and methanol–buffer in different proportions as mobile phases. The retention values, log k or R _M were extrapolated to zero organic modifier content to obtain the log k _w or R _MW values. Calibration equations were obtained for standards of known lipophilicity. A simple method employing a gradient procedure of 10–100% acetonitrile or methanol in 60 min and standards of the extreme lipophilicity was also elaborated. Chromatographic log P values were compared to those calculated by use of different software products. Finally, principal component analysis was performed to explore and visualize similarities and differences among the drugs and among the methods.