Liquid crystal codendrimers with a statistical distribution of phenolic and mesogenic groups: behavior as Langmuir and Langmuir-Blodgett films

The first series of carbosilane liquid crystal codendrimers with groups of different polarity has been synthesized. The chemical structure of the newly synthesized materials and the composition of the codendrimers were studied by NMR spectroscopy and MALDI-TOF MS. It was found that the codendrimers tend to form stable Langmuir films at the air-water surface. The influence of composition and generation number on surface pressure-surface area isotherms and film stability was studied. Brewster angle microscopy confirmed the different phase behavior for monolayers of different codendrimer composition and generation number. It was found that side groups of fifth-generation codendrimers do not segregate, unlike those of lower generations. Langmuir-Blodgett films on solid substrates were obtained by the vertical dipping method. X-ray diffraction showed that the codendrimers with 75% of hydrophobic mesogenic terminal groups formed ordered layers parallel to the substrate.     

Monolayer behavior of 1,2-dipalmitoylgalloylglycerol, a synthetic lipid with strong cohesive properties

Monolayers of 1,2-dipalmitoylgalloylglycerol (DPGG) were investigated at the air-water interface. The monolayers exhibit high rigidity which leads to the formation of surface tension gradients in the film. Transfer to solid substrate yields homogeneous Langmuir-Blodgett films with low surface roughness. Large numbers of aggregates were observed by Brewster angle microscopy and imaging ellipsometry at relatively high molecular areas. At all pressures, the DPGG molecules adopt conformations corresponding to low tilt angles. Constant area measurements result in a pressure increase as the film rearranges to maximize the intermolecular interactions. An optimal intermolecular distance required for the formation of a hydrogen-bond network between headgroups is proposed to explain the observed, highly cohesive monolayer behavior.     

Supramolecular architecture in Langmuir and Langmuir-Blodgett films incorporating a chiral azobenzene

This article describes the synthesis and fabrication of Langmuir and Langmuir-Blodgett (LB) films incorporating a chiral azobenzene derivative, namely, ( S)-4- sec-butyloxy-4'-[5'-(methyloxycarbonyl)pentyl-1'-oxy]azobenzene, abbreviated as AZO-C4(S). Appropriate conditions for the fabrication of monolayers of AZO-C4(S) at the air-water interface have been established, and the resulting Langmuir films have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and UV-vis reflection spectroscopy. The results indicate the formation of an ordered trilayer at the air-water interface with UV-vis reflection spectroscopy showing a new supramolecular architecture for multilayered films as well as the formation of J aggregates. Films were transferred onto solid substrates, with AFM revealing well-ordered multilayered films without 3D defects. Infrared and UV-vis absorption spectroscopy indicate that the supramolecular architecture may be favored by the formation of H bonds between acid groups in neighboring layers and pi-pi intermolecular interactions. Circular dichroism spectra reveal chiro-optical activity in multilayered LB films.     

Films of novel mesogenic molecules at air-water and air-solid interfaces

Discotic molecules are known to form highly anisotropic structures at the air-water (A-W) interface. We have studied two novel ionic discotic mesogenic molecules, viz., pyridinium tethered with hexaalkoxytriphenylene with bromide counterion (Py-Tp) and imidazolium tethered with hexaalkoxytriphenylene with bromide counterion (Im-Tp) at A-W and air-solid interfaces. The monolayer phases were investigated at the A-W interface employing surface manometry and Brewster angle microscopy techniques. They indicate a uniform monolayer phase which shows negligible hysteresis on expanding and compressing. Also, in both the systems the collapsed state completely reverts to the monolayer state. These monolayer films transferred at different surface pressures by Langmuir-Blodgett technique were studied by employing atomic force microscopy. The topographies of these films transferred at the low and high surface pressure region of the isotherm indicate a transformation of the monolayer from face-on to edge-on structure.     

Self-assembly of amphiphilic hexapyridinium cations at the air/water interface and on HOPG surfaces.

Mono- and multilayers of a novel amphiphilic hexapyridinium cation with six eicosyl chains (3) are spread at the air/water interface as well as on highly ordered pyrolytic graphite (HOPG). On water, the monolayer of 3 is investigated by recording surface pressure/area and surface potential/area isotherms, and by Brewster angle microscopy (BAM). Self-organized tubular micelles with an internal edge-on orientation of molecules form at the air/water interface at low surface pressure whereas multilayers are present at high surface pressure, after a phase transition. Packing motifs suggesting a tubular arrangement of the constituting molecules were gleaned from atomic force microscopy (AFM) investigations of Langmuir-Blodgett (LB) monolayers being transferred on HOPG at different surface pressures. These LB film structures are compared to the self-assembled monolayer (SAM) of 3 formed via adsorption from a supersaturated solution, which is studied by scanning tunnelling microscopy (STM). On HOPG the SAM of 3 consists of nanorods with a highly ordered edge-on packing of the aromatic rings and an arrangement of alkyl chains which resembles the packing of molecules at the air/water interface at low surface pressure. Additional details of the molecular packing were gleaned from single-crystal X-ray structure analysis of the hexapyridinium model compound 2b, which possesses methyl instead of eicosyl residues.     

Structural characterization and properties of an azopolymer arranged in Langmuir and Langmuir-Blodgett films

The fabrication of Langmuir and Langmuir-Blodgett (LB) films of an acid-azopolymer (PAzCOOH) is reported. Several techniques were used in their characterization: surface pressure (pi) and surface potential (DeltaV) isotherms, UV-vis reflection spectroscopy, and Brewster angle microscopy (BAM) for the Langmuir films and contact angle measurements, UV-vis, fluorescence, IR and Raman spectroscopy and scanning electronic microscopy (SEM) for the LB films. Our study reveals that lateral chains of the polymer situate preferentially onto the water surface with the acid group in contact with the water, where aggregates are scarcely formed. Therefore, the lateral chains of PAzCOOH can be treated as individual monomers to determine structural properties of the fabricated Langmuir and LB films. Monomeric treatment has been used to interpret UV-vis reflection spectroscopy, and a monomer model has been performed to represent lateral chains using density functional theory at B3LYP 6-31G(d,p) level of theory to assign the observed vibrational spectra.     

Preparation of ordered films containing a phenylene ethynylene oligomer by the Langmuir-Blodgett technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.     

Langmuir-Schäfer films of an amphiphilic ruthenium complex bearing an "almost naked" multicharged headgroup

In this paper the preparation and characterization of Langmuir-Sch?fer (LS) films of a novel amphiphilic dipolar complex, [Ru(II)(NH(3))(5)(N-dodecyl-4,4'-bpy)](PF(6))(3) (1), are reported. Preparation of these films, otherwise precluded utilizing standard Langmuir procedures, is achieved by using a subphase at relatively high ionic strength, by addition of NH(4)PF(6). The morphology and the spectroscopic features of the floating films are investigated by Brewster angle microscopy and UV-vis reflection spectroscopy at the water-air interface, respectively, whereas LS films are characterized by absorption spectroscopy and atomic force microscopy. The overall results indicate the existence of aggregates of 1 and formation of homogeneous, densely packed layers. The presented approach could represent a general method to achieve Langmuir-Blodgett films of amphiphilic metal complexes having an "almost naked" multicharged headgroup.     

Morphological investigation of hybrid Langmuir-Blodgett films of arachidic acid with a hydrotalcite/dendrimer nanocomposite

A hydrotalcite clay/dendrimer nanocomposite prepared by the ionic exchange process was adsorbed from suspension of the nanocomposite on a Langmuir monolayer of arachidic acid at the air/water interface, followed by compressing and transferring onto an arachidic acid monolayer Langmuir-Blodgett (LB) film on mica. For comparison, the hydrotalcite-adsorbed hybrid film was also prepared. The morphology of hydrotalcite and the nanocomposite studied by transmission electron microscopy indicated the layered structures with respectively 1.2 +/- 0.3 and 3.2 +/- 0.5 nm repeating distances. The hybrid Langmuir films displayed the occupied surface area of 0.24 nm2 for both hydrotalcite and the nanocomposite. The formation of hybrid Langmuir films was confirmed by Brewster angle microscopy. Atomic force microscopic images of hybrid LB films revealed the formation of plateau domains with the height difference of 6 nm for hydrotalcite and 12 nm for the nanocomposite and the presence of dendrimers adsorbed on the clay surface of the nanocomposite.     

Langmuir monolayers and the transferred films of fluorinated amphiphiles containing vinyl groups

The monolayer behavior of long-chain esters of acrylic and methacrylic acids containing perfluoro or partially fluorinated carbon chains at the air/water interface was studied by surface pressure-area isotherm measurements and Brewster angle microscopy. It has been found that a minor change in the chemical structures of these fluorinated amphiphiles, such as a hydrogen substituted at the omega-position of the hydrophobic fluorocarbon tails instead of a fluorine as well as hydrophilic vinyl ester groups inserted between acrylates and methacrylates, induces a drastic change in the isotherms for the monolayers, suggesting different molecular orientation and packing in the films. The monolayers were transferred by horizontal lifting, Langmuir-Blodgett, and surface-lowering methods to give the X-, Y-, and Z-type films, respectively. These films were characterized by scanning probe microscopy, to clarify the mesoscopic surface structures of the molecular films exposed with the hydrophilic or hydrophobic moieties in air, depending upon the dipping methods. The Z-type films with the outermost surface of the fluorinated substituents were examined in relation to the frictional properties that strongly depend upon the fluorine and the hydrogen atoms at the end of the hydrophobic fluorocarbon chains, which is controllable at the atomic level.     

Formation of Langmuir layers and surface modification using new upper-rim fully tethered bipyridinyl or bithiazolyl cyclodextrins and their fluorescent metal complexes

Seven new amphiphilic cyclodextrins bearing bipyridyl or bithiazolyl moieties at the narrow rim and free hydroxyl or methoxyl groups at the wide rim of the cyclooctaamylose crown were synthesized using a one step "phosphine imide" approach. These ligands form metal complexes that have fluorescence properties with potentials for optical applications. Here, the cyclodextrin derivatives were used as probes for evaluating the role of different moieties in the self-assembly process, providing crucial information in creating functional devices. The behavior of these molecules and of complexes with EuIII in some cases was studied in Langmuir films using surface pressure (pi) and surface potential (deltaV) measurements performed as a function of film compression (compression isotherms). For chosen cyclodextrins, Brewster angle microscopy (BAM) in monolayers was performed. Films formed with derivatives 1, 3, 7, and 2compl were transferred on mica using the Langmuir-Blodgett technique. The properties of the films deposited on mica were analyzed with fluorimetry and, in the case of derivative 7, using fringe of equal chromatic order technique (FECO). The monolayer structure and the fluorescence properties of the Langmuir-Blodgett films indicate that the derivatives studied can be used for preparing cyclodextrin-based optical devices.     

Submolecular Structures in Dipalmytoylphosphatidylethanolamine Langmuir-Blodgett Films Observed by Scanning Force Microscopy

Dipalmitoylphosphatidylethanolamine (DDPE) Langmuir films at the air/water interface have been studied. These films exhibit high stability. The resulting films transferred on muscovite have been studied by scanning force microscopy with the contact mode. At the microscopic scale, DDPE Langmuir-Blodgett films appear densely packed with few defects. At molecular resolution the films appear well ordered; the double tail of the lipids has been observed.d Copyright 2000 Academic Press.     

Interfacial organizations of gel phospholipid and cholesterol in bovine lung surfactant films

Pulmonary surfactants stabilize the lung by way of reducing surface tension at the air-lung interface of the alveolus. 31P NMR, thin-layer chromatography, and electrospray ionization mass spectroscopy of bovine lipid extract surfactant (BLES) confirmed dipalmitoylphosphatidylcholine (DPPC) to be the major phospholipid species, with significant amounts of palmitoyl-oleoylphosphatidylcholine, palmitoyl-myristoylphosphatidylcholine, and palmitoyl-oleoylphosphatidylglycerol. BLES and DPPC spread at the air-water interface were studied through surface pressure area, fluorescence, and Brewster angle microscopy measurements. Langmuir-Blodgett films of monomolecular films, deposited on mica, were characterized by atomic force microscopy. BLES films displayed shape, size, and vertical height profiles distinct from those of DPPC alone. Calcium ions in the subphase altered BLES film domain structure. The addition of cholesterol (4 mol %) resulted in the destabilization of compressed BLES films at higher surface pressures (>40 mN m-1) and the formation of multilayered structures, apparently consisting of stacked monolayers. The studies suggested potential roles for individual surfactant lipid components in supramolecular arrangements, which could be the contributing factors in pulmonary surfactant to attain low surface tension at the air-water interface.     

Chiral recognition of dipeptides in Langmuir monolayers

The recognition of the enantiomeric couples of ditryptophan in Langmuir films of N-hexadecanoyl-l-proline was investigated by surface pressure–area (π–A) isotherm measurements and Brewster angle microscopy experiments. The π–A isotherms relative to the films including the enantiomeric dipeptides show small differences whereas an evident enantiodiscrimination is observed by Brewster angle microscopy images.     

Formation, structure, and morphology of triazole-based Langmuir-Blodgett films

The formation, morphology, and structure of two-dimensional Langmuir-Blodgett (LB) assemblies of octadecyltriazole (ODT)-based metal-containing oligomers presenting, in the case of iron, the spin-crossover phenomenon is studied with Brewster angle microscopy, IR dichroism, X-ray diffraction, and atomic force microscopy. Two processes occurring at the air-water interface are confirmed to dominate the mechanism of formation of these LB films, the instability of the coordination polymers at the air-water interface and recoordination of metal ions in the subphase at the interface during the LB deposition process. The Langmuir film allowing the LB film formation is mostly made of ODT. The films do present a lamellar structure in which the ODT molecules are tilted and incorporate coordinated isolated metal ions and oligomers of metal ions. The morphology of the LB films is globally flat but with a rather high roughness resulting from inhomogeneities related to phenomena occurring during the LB film formation. These observations are in agreement with the relative affinity of the metal ions with ODT and the relative stability of the coordination polymers at the air-water interface, which have been determined for the group Cu-Fe-Co-Ni.     

Time-dependent complexation of glucose-reduced gold nanoparticles with octadecylamine Langmuir monolayers

We report on the reduction of aqueous chloroaurate ions by glucose to form gold nanoparticles of uniform size. We further demonstrate the complexation of these particles with octadecylamine (ODA) monolayers at the air-water interface. Pressure-area (pi-A) isotherms as a function of time of complexation revealed a significant expansion of the monolayer. Surface pressure variation with time for constant areas after spreading of the monolayer was carried out to observe the kinetics of complexation of the colloidal particles at the interface. The kinetics of complexation of the particles at the interface was also monitored by Brewster angle microscopy (BAM) measurements. Langmuir-Blodgett films of the particles complexed with ODA were formed at a subphase pH of 9 onto different substrates. Quartz crystal microgravimetry (QCM) was used to quantify the amount of particles deposited per immersion cycle of the quartz crystal. The LB films were further characterized by UV-vis and transmission electron microscopy (TEM) measurements. TEM measurements indicate a close packed and equidistant arrangement of colloidal particles in the LB film, probably due to hydrogen-bonding interactions.     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.     

Trapping, pattern formation, and ordering of polyelectrolyte/single-wall carbon nanotube complexes at the air/water and air/solid interfaces

The Langmuir and Langmuir-Blodgett (LB) techniques have been applied in a novel approach to build structurally well-ordered, oriented, and organized assemblies of water-soluble single-wall carbon nanotubes (ws-SWCNTs) at the air/water and air/solid interfaces. The SWCNTs were rendered hydrophilic by complexing them with a quenched polyelectrolyte. We observed that the ws-SWCNT concentration at the air/water interface increases with time condensing into different patterns, among which are isolated soap-froths, rings, and the aggregation of cumuli-like 2D-structures. These patterns were recorded at different compression-expansion stages by Brewster angle microscopy (BAM). From the isotherm measurements, we are able to determine the diffusion process by which ws-SWCNT concentration builds up at the water surface. The corresponding LB films were very stable and could be transferred onto mica substrates easily. Atomic force microscopy (AFM) images revealed that the morphology of these films is surface-pressure dependent, and aligned structures with a nematic-like order formed closely packed mono- or multilayer films. The assembly of 2D-nanostructures by means of this approach offers a great potential for emergent technological applications using modified water-soluble SWCNTs.     

Nanoscale surface patterns from 10(3) single molecule helices of biodegradable poly(L-lactic acid)

Atomic force microscopy, reflection absorption infrared spectroscopy, and X-ray reflectivity studies reveal that poly(L-lactic acid) molecules in Langmuir-Blodgett (LB) films exist as 10(3) helices over nearly the entire length of the polymer chain. This feature gives rise to LB films with highly ordered nanoscale smectic liquid crystalline-like surface patterns with low surface roughness and lamellar spacings that scale with molar mass. These studies provide a new approach for controlling surface morphology with a biodegradable polymer commonly used for drug delivery and tissue engineering.     

The cis-bis(decanoate)tin phthalocyanine/DPPC film at the air/water interface

Films made of cis-bis-decanoate-tin(IV) phthalocyanine (PcSn10) and racemic dipalmitoylphosphatidylcholine (DPPC) are studied with compression isotherms and Brewster angle microscopy (BAM) at the air/water interface. Films enriched in PcSn10 present phase separation elliptical-shaped domains. These domains present optical anisotropy and molecular order. They are enriched in PcSn10, and the film outside these domains is enriched in DPPC, as shown in by high-angle annular dark-field transmission electron microscopy on Langmuir-Blodgett (LB) transferred films. Film collapse area and atomic force microscopy images of LB transferred films on mica indicate that the films are actually multilayers. A computational survey was performed to determine how the PcSn10 molecules prefer to self-assemble, in films basically made of PcSn10. The relative energetic stability for several dimeric assemblies was obtained, and a crystal model of the film was developed through packing and repeating the PcSn10 molecules, along the crystallographic directions of the unit cell. Our results contribute to understanding the strong interaction between PcSn10 and DPPC at the air/water interface, where even small quantities of DPPC (~1-2%) can modify the film in an important way.