银/金纳米线阵列表面增强拉曼基底的制备及对孔雀石绿的高灵敏度检测

利用种子介导的软模板生长方法制备了金纳米线(Au NWs)阵列, 通过调节生长温度控制Au NWs阵列的形貌, 最后在经硼氢化钠(NaBH₄)清洗过的Au NWs阵列上化学沉积银纳米颗粒(Ag NPs), 制得银/金纳米线(Ag/Au NWs)阵列作为表面增强拉曼散射(SERS)基底. 选用罗丹明6G(R6G)作为拉曼探针分子测定了Ag/Au NWs阵列的SERS性能. 结果表明, Ag/Au NWs阵列作为SERS基底具有高灵敏度、 优异的信号均匀性和良好的稳定性. 使用Ag/Au NWs阵列对孔雀石绿(MG)检测的检出限可低至1×10^-8 mol/L, 线性范围为 1×10^-8~1×10^-4 mol/L. NaBH₄可以在不影响SERS性能的情况下去除Ag/Au NWs阵列上吸附的分子, 使得 SERS基底可以重复使用. 使用Ag/Au NWs阵列对湖水中的MG进行检测, 得到了可靠的回收率, 证明Ag/Au NWs 阵列在检测环境水体中的孔雀石绿上具有应用潜力.     

Au/Ag复合纳米笼在表面增强拉曼光谱中的应用

表面增强拉曼光谱（SERS）技术是一种基于贵金属纳米结构基底对被检测物进行高灵敏度检测的一种方法.具有特殊纳米结构的贵金属表面受到激光的照射时，金属表面的自由电子会受到极大的振荡，当入射光频率与振荡频率相近时，则会发生表面等离子体共振现象（SPR），使金属表面的局域电场强度极大增强，入射光强度和散射光强度都得到成倍的放大，从而使吸附在贵金属纳米结构表面的分子的拉曼散射信号得到有效的增强.使用NaBH₄还原-酸刻蚀模板法，制备了八面体Au/Ag复合纳米笼，其形貌规整，尺寸均匀约为600 nm，无Cu₂O模板的残留，Au元素均匀负载在Ag纳米笼上，质量分数约为16.8%；Au/Ag复合纳米笼的紫外可见吸收峰相对于Ag纳米笼发生了红移，更重要的是，Au和Ag元素协同赋予了复合纳米笼超高的SERS灵敏度和重复性，Au/Ag复合纳米笼实现了对罗丹明6G的痕量检测（5×10^-14 mol/L），通过时域有限差分法（FDTD）模拟证实：这主要归因于等离子共振作用产生的高电磁场强度；此外，Au元素的加入使Au/Ag复合纳米笼具有优异的抗氧化性和化学稳定性，即使在1%的H₂O₂溶液中浸泡3 h，仍然能够保持优异的SERS性能.八面体Au/Ag复合纳米笼有望成为一种具有应用前景的高灵敏度、高稳定性的SERS基底.     

采用新型分子表面印迹技术构建手性空穴实现对手性药物对映体的分子识别与高效拆分

通过偶联剂γ-氨丙基三甲氧基硅烷（AMPS）的媒介,通过表面引发接枝,将功能单体甲基丙烯酸（MAA）接枝聚合在微米级硅胶微粒表面,制得功能接枝微粒PMAA/SiO2;采用本课题组建立的新型分子表面印迹技术,以四咪唑（TM）为模型手性药物,用其左旋对映体L-TM为模板分子,乙二醇二缩水甘油醚（EGDE）为交联剂,对接枝在...     

替米考星磁性表面分子印迹聚合物的制备及应用

报道了一种替米考星磁性表面分子印迹聚合物吸附剂。它以Fe₃O₄@SiO₂为磁性基质，替米考星为模板分子，甲基丙烯酸为功能单体，通过硅烷化反应在Fe₃O₄@SiO₂表面键合上3-（甲基丙烯酰氧）丙基三甲氧基硅烷制备得到。该吸附剂对大环内酯类抗生素表现出高选择性和高富集能力（对4种模型大环内酯的富集倍数为212~675倍）。相比传统的非表面分子印迹聚合物，吸附平衡时间可缩短为30 min，可以重复使用至少6次；结合高效液相色谱-紫外检测，将该吸附剂应用于奶粉中4种大环内酯类抗生素的残留检测，所得检出限和定量限分别为0.58~1.36 μg/kg和1.92~4.55 μg/kg，日内（n=5）和日间（n=3）回收率在83.2%~123.0%之间，RSD均小于12.2%。     

Ag负载TiO2核壳基底的制备及对结晶紫的高效(SERS)检测

通过简单的一步水热法制备了TiO2核壳微球，然后经过原位光还原将Ag负载于其表面，成功得到了用于有机分子检测的Ag负载TiO2核壳表面增强拉曼散射（SERS）基底。得益于TiO2核壳微球的结构，其对结晶紫（CV）分子表现出高的吸附容量。单一TiO2核壳微球对CV的检测限为10-3 M，而负载Ag以后，其对CV的检测限能达到10-7 M，增强因子（EF）可达3.49×105。优异的SERS检测性能可能归因于以下几点：（1）半导体TiO2为Ag纳米粒子提供了均匀分散的骨架，创造了高密度的热点；（2）为CV分子提供了大的吸附面积；（3）复合材料促进了激发光子的相互作用。     

硅胶表面3-甲基噻吩分子印迹聚合物的制备及吸附特性研究

采用γ-氨丙基三乙氧基硅烷对硅胶微球表面进行接枝修饰,然后以甲基丙烯酸为功能单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯为溶剂,3-甲基噻吩为模板分子,在硅胶微球表面聚合,得到3-甲基噻吩的硅胶微球表面分子印迹聚合物,用红外光谱进行结构表征。通过考察模板分子、功能单体、交联剂、溶剂的用量等对吸附容量的影响,得到3-甲基噻吩、甲基丙烯酸、二甲基丙烯酸乙二醇酯、甲苯适宜的摩尔聚合比,以此配比合成了3-甲基噻吩表面印迹聚合物,在模拟汽油中,研究了该聚合物对3-甲基噻吩的吸附动力学、吸附选择性、竞争性及再生性能。结果表明,分子印迹聚合物对3-甲基噻吩具有良好的吸附选择性和再生性能,最大吸附容量可达85mg/g,有望将其用于汽油中噻吩类硫的深度脱除,从而弥补加氢脱硫缺陷。     

核壳结构Boc-氨基酸分子印迹分离介质的研究

将硅胶表面硅羟基与γ-（甲基丙烯酰氧）丙基三甲氧基硅烷反应合成具有CC端基的改性硅胶核,进一步以N-Boc-L-色氨酸为模板分子,采用分子印迹技术在改性后的硅胶表面包覆印迹聚合物,制备出核壳结构氨基酸分子印迹分离介质。这种印迹分离介质对模板N-Boc-L-色氨酸具有良好的吸附性,最大饱和吸附量可达到85.96 mg/...     

胆红素分子表面印迹材料MIP-PMAA/SiO2的制备及识别特性

通过γ-（甲基丙烯酰氧）丙基三甲氧基硅烷的媒介作用,在硅胶微粒表面偶合接枝聚甲基丙烯酸（PMAA）,制备了PMAA/SiO2接枝微粒。采用新型分子表面印迹技术,以乙二醇二缩水甘油醚（EGDE）为交联剂,制备了以胆红素为模板分子的表面印迹材料MIP-PMAA/SiO2。分别通过静态和动态吸附实验考查了该印迹材料对胆红素的识别特性。结果表明：该印迹材料对胆红素兼具优良的结合亲和性和特异的识别选择性,同时,具有优良的脱附性能,脱附率可达99.5%。     

贵金属纳米颗粒杂化囊泡的制备及拉曼增强效果研究

以超支化聚合物囊泡为模板制备了贵金属纳米颗粒表面功能化的杂化囊泡.模板囊泡通过多巴胺修饰的超支化聚醚HSP-DA在水中自组装形成.在碱性条件下,囊泡表面的多巴胺自聚合生成聚多巴胺,实现囊泡的交联.由于聚多巴胺具有强黏附特性,因此可以将HSP-PDA交联囊泡分别与Au纳米溶胶、Ag纳米溶胶直接混合,得到Au纳米颗粒或Ag纳米颗粒功能化的杂化囊泡.分别测定了2种杂化囊泡的拉曼光谱,发现杂化囊泡产生了明显的表面增强的拉曼光谱(SERS)信号,清晰显示了对应于囊泡模板分子的拉曼信号,表明可以通过SERS来原位检测囊泡的组成.Ag纳米颗粒杂化囊泡展示出更高的SERS灵敏度,可进一步作为探针检测水中浓度为10-7mol/L罗丹明6G分子,得到了显著增强的拉曼光谱,证明所制备的Ag纳米颗粒杂化囊泡可用于目标分子的痕量检测.     

谷胱甘肽磁性分子印迹聚合物的制备及吸附性能研究

采用表面分子印迹技术,以谷胱甘肽（GSH）为模板分子,N-乙烯基吡咯烷酮（NVP）和丙烯酰胺（AM）为功能单体,N,N’-亚甲基双丙烯酰胺（MBA）为交联剂,γ-（甲基丙烯酰氧）丙基三甲氧基硅烷（KH570）改性的Fe₃O₄纳米颗粒为磁性载体,制备了对GSH有特异识别性的磁性分子印迹聚合物（GSH-MMIPs）. 利用X射线衍射仪（XRD）、透射电子显微镜（TEM）、红外光谱（FT-IR）和振动样品磁强计（VSM）对聚合物进行了表征,结果表明磁性载体表面成功地包覆了分子印迹聚合物薄层. 静态吸附平衡实验和Scatchard分析结果表明,GSH-MMIPs中存在两类不同的结合位点,平衡解离常数分别为8.786×10^-4 mol/L和5.424×10^-3 mol/L,最大吸附量分别为49.195 mg/g和155.003 mg/g. 与化学组成相同的磁性非印迹聚合物（GSH-MNIPs）相比,GSH-MMIPs对谷胱甘肽有较高的选择吸附性能.     

Surface enhanced Raman scattering effects of silver colloids with different shapes

By solution-based method, three kinds of silver colloids, self-assembled nanowires, triangular nanoplates and quasispherical nanoparticles, have been synthesized. TEM studies revealed that they exposed different crystal planes, such as {111} crystal planes to triangular nanoplates, mainly {100} and {111} planes to self-assembly nanowires. Hereby, do the distinct shapes and crystal planes have an impact on the surface enhanced Raman scattering (SERS)? The great differences of the SERS spectra of rhodamine B at these Ag colloids confirmed that the shapes and crystal planes of silver have great effect on Raman enhancement, especially the crystal planes.     

基于常温无外压的转移印刷技术构筑半球状多级Ag基底

基于自组装技术制备了3种不同粒径的聚苯乙烯微球阵列,并翻制了与微球阵列互补的软模板.基于室温无外压的转移印刷技术制备了聚甲基丙烯酸甲酯半球形微纳阵列,然后基于原位光还原技术在聚甲基丙烯酸甲酯半球表面制备Ag纳米颗粒,构筑了拉曼增强的半球状多级Ag基底.转移印刷技术的关键是利用软模板自身的低表面能和表面羟基化的图案化材料与亲水基底界面间的氢键作用力.     

银纳米枝的合成及表面增强拉曼效应

利用硝酸银与铜之间发生置换反应原理, 在铜箔上得到了有序的银纳米枝结构, 用十二烷基磺酸钠(SDS)为表面活性剂, 通过调控前驱体硝酸银的浓度, 可在铜箔上得到不同密度的银纳米枝. 表面拉曼增强实验结果表明, 当分别以对巯基苯胺(4-ATP)、腺嘌呤和罗丹明G6为探针分子时, 有序的银纳米枝结构比无序的银纳米粒子具有更好的拉曼增强活性; 且随银纳米枝密度的增加, 表面拉曼增强活性有所提高. 该有序的银纳米枝结构是较好的表面增强拉曼(SERS)活性基底, 在有机分子和生物分子的SERS检测方面将具有一定的应用前景.     

Synthesis of highly ordered AgNPs-coated silica photonic crystal beads for sensitive and reproducible 3D SERS substrates

3 D highly ordered silver nanoparticles(AgNPs) coated silica photonic crystal beads(Ag/SPCBs) were prepared and exploited as a novel surface enhanced Raman scattering(SERS) substrate.The monodisperse and size-controlled SPCBs were prepared via self-assembly of silica nanoparticles process using a simple microfluidic device.Then the Ag/SPCBs were easily obtained by in situ growth of AgNPs onto the NH₂-modified SPCBs.Field emitting scanning electron microscopy(SEM) and energy dispersive X-ray spectrometry(EDX) were used to characterize the Ag/SPCBs.The effect of silica nanoparticle size and AgNO₃ concentration on the SERS performance of the resultant Ag/SPCBs substrate were discussed in detail.The results indicate that the Ag/SPCBs have highest SERS signals when silica nanoparticle size is250 nm and AgNO₃ concentration is 0.8 mg/mL.Using malachite green(MG) as model analyte,the Ag/SPCBs substrate displayed a high sensitivity and a wide linear range for MG.The well-designed Ag/SPCBs show high uniformity and excellent reproducibility,and can be used as an effective SERS substrate for sensitive assay application.     

氨基酸包覆的YVO4∶Eu纳米粒子的合成、 发光及细胞成像性能

以水为溶剂, 氨基酸为模板剂, 通过微波辅助水热方法合成了YVO₄∶Eu纳米粒子. 该纳米粒子具有结晶化程度高、 稳定性好及尺寸小(<50 nm)等特点, 且在水中具有良好的分散性. 探究了氨基酸加入量对纳米粒子结构及形貌的影响, 并将该合成方法用于其它稀土钒酸盐. 在紫外光激发下, YVO₄∶Eu纳米粒子表现出优异的荧光性能(发射明亮的红光), 可将其与柔性聚合物复合用于简易的三维(3D)图像显示. 此外, YVO₄∶Eu纳米粒子还可作为荧光探针用于标记小鼠结肠癌细胞(CT26细胞).     

Gold Nanowire Forests for SERS Detection

Simple wet chemistry has been applied to control the vertical growth of gold nanowires on a glass substrate. As a consequence, the longitudinal localized surface plasmon band position can be tuned from 656 to 1477 nm in a few minutes by simply controlling the growth rate and time. This allowed us to select the optimum conditions for maximum electromagnetic enhancement and performance in surface enhanced Raman scattering (SERS) detection. SERS measurements confirmed the uniform and reproducible distribution of the nanowires on the substrate, with the subsequent high reproducibility of hot spot formation. Detection of malachite green in water and of 1-naphthalenethiol from the gas phase are demonstrated as proof-of-concept applications of these three-dimensional SERS substrates.     

Comparison of molecular imprinted particles prepared using precipitation polymerization in water and chloroform for fluorescent detection of nitroaromatics

A comparative study was conducted to study the effects that two different polymerization solvents would have on the properties of imprinted polymer microparticles prepared using precipitation polymerization. Microparticles prepared in chloroform, which previous results indicated was the optimal solvent for molecular imprinting of nitroaromatic explosive compounds, were compared to water, which was hypothesized to decrease water swelling of the polymer and allow enhanced rebinding of aqueous template. The microparticles were characterized and were integrated into a fluorescence sensing mechanism for detection of nitroaromatic explosive compounds. The performance of the sensing mechanisms was compared to illustrate which polymerization solvent produced optimal imprinted polymer microparticles for detection of nitroaromatic molecules. Results indicated that the structures of microparticles synthesized in chloroform versus water varied greatly. Sensor performance studies showed that the microparticles prepared in chloroform had greater imprinting efficiency and higher template rebinding than those prepared in water. For detection of 2,4,6-trinitrotoluene, the chloroform-based fluorescent microparticles achieved a lower limit of detection of 0.1 μM, as compared to 100 μM for the water-based fluorescent microparticles. Detection limits for 2,4-dinitrotoluene, as well as time response studies, also demonstrated that the chloroform-based particles are more effective for detection of nitroaromatic compounds than water-based particles. These results illustrate that the enhanced chemical properties of using the experimentally determined optimal polymerization solvent overcome deformation of imprinted binding sites by water swelling and benefits of using the polymerization solvent for rebinding of the template.     

Preparation of Z-L-Phe-OH-NBD imprinted microchannel and its molecular recognition study

An integrated microchip was presented for selective recognition of Z-L-Phe-OH-NBD, using molecular imprinting technique. Molecularly imprinted polymer (MIP) were prepared by copolymerization in the presence of template molecule Z-L-Phe-OH-NBD, in which methacrylic acid and 4-vinylpyridine were used as functional monomers and ethylene dimethacrylate used as crosslinker. Imprinted polymer particles were introduced into a microchannel fabricated with a new material i.e. poly(methylvinylsiloxane) by simply rapid prototyping method. Imprinted effects were evaluated by laser-induced fluorescence (LIF) detection where the results indicated that good selective recognition for Z-L-Phe-OH-NBD in the imprinted polymer was obtained; the adsorption percentage of Z-L-Phe-OH-NBD was 61%. In contrast to conventional molecular imprinting analysis, integration shortened overall analysis time from 4h to 10 min.     

Synthesis and Molecular Recognition of Molecularly Imprinted Polymer with Ibuprofen as Template

Ibuprofen and ketoprofen are chemically similar non‐steroidal anti‐inflammatory drugs widely used in the treatment of arthritis. Using a molecular imprinting technique, a simple and rapid method was developed for the simultaneous separation and determination of ibuprofen and ketoprofen. Molecular imprinting introduces artificial binding sites into a synthetic polymer matrix, allowing it to exhibit selective rebinding of template molecules. Imprinted polymers can be regarded as an HPLC stationary phase, important for pharmaceutical analysis. Most molecularly imprinted polymers (MIPs) are synthesized by free radical polymerization of functional monomers, resulting in an excess of crosslinking monomers. In this study, MIPs have been prepared with a ibuprofen template, which can form intramolecular hydrogen bonds. Methacrylic acid (MAA) and ethyleneglycol dimethacrylate (EGDMA) were used as the functional monomer and cross‐linker, respectively. Bulk polymerization was carried out at 4 °C under UV radiation. The resulting MIP was ground into 25?44 μm particles, which were slurry‐packed into analytical columns. Template molecules were removed by methanol‐acetic acid (9:1, v/v). We evaluated the template binding performance of the MIP using HPLC, with ultraviolet (UV) detection at 234 nm. Chromatographic resolution of ibuprofen and ketoprofen on the MIPs were appraised using buffer/acetonitrile (45/55, v/v) as the mobile phase. Results show that the MIPs prepared using ibuprofen as the template had a significant molecular imprinting effect. The method was successfully applied to the separation and analysis of ibuprofen and ketoprofen in pharmaceuticals.