Application of central composite design to the optimisation of aqueous two-phase extraction of human antibodies

The partition of human antibodies in aqueous two-phase systems (ATPSs) of polyethylene glycol (PEG) and phosphate was systematically studied using first pure proteins systems and then an artificial mixture of proteins containing 1mg/ml human immunoglobulin G (IgG), 10mg/ml serum albumin and 2mg/ml myoglobin. Preliminary results obtained using pure proteins systems indicated that the PEG molecular weight and concentration, the pH value and the salts concentration had a pronounced effect on the partitioning behaviour of all proteins. For high ionic strengths and pH values higher than the isoelectric point (pI) of the contaminant proteins, IgG could be selectively recovered on the top phase. According to these results, a face centred composite design was performed in order to optimise the purification of IgG from the mixture of proteins. The optimal conditions for the isolation of IgG were observed for high concentrations of NaCl and low concentrations of both phase forming components. The best purification was achieved using an ATPS containing 8% (w/w) PEG 3350, 10% (w/w) phosphate pH 6 and 15% (w/w) NaCl. A recovery yield of 101+/-7%, a purity of 99+/-0% and a yield of native IgG of 97+/-4% were obtained. Back extraction studies of IgG to a new phosphate phase were performed and higher yields were obtained using 10% phosphate buffer at pH 6. The total extraction yield was 76% and the purity 100%.     

Partitioning of lactate dehydrogenase from bovine heart crude extract by polyethylene glycol-citrate aqueous two-phase systems

Aqueous two-phase systems (ATPS) composed of polyethylene glycol (PEG)-citrate have been used for enzyme partitioning studies. The behavior of lactate dehydrogenase (LDH) from bovine heart crude extract was analyzed using a two-level factorial design in which the PEG molar mass and concentration, the citrate concentration were selected as independent variables, while the purification factor, the partition coefficient (K) and the activity yield were selected as responses. The statistical analysis revealed the effect of PEG molar mass on K. LDH exhibited a better partitioning toward PEG-rich phase and the highest K value (1079.81) was obtained with 42% (w/w) PEG 400 and 7.5% (w/w) citrate concentration. PEG molar mass also influenced the purification factor of the enzyme in the top phase. Possibly these ATPS remove inhibitors present in the extract affording higher enzyme yield.     

Horseradish peroxidase extraction and purification by aqueous two-phase partition

The effect of poly(ethyleneglycol) (PEG) molecular weight, system pH, and sodium chloride concentration on the partitioning behavior of horseradish peroxidase fromArmomcia rusticana root extract was investigated in poly(ethyleneglycol)/sodium phosphate systems. PEG molecular weight strongly affects the enzyme partition coefficient, whereas pH variation from 5.5 to 8.0 has little effect. The addition of sodium chloride (8% w/w) to a PEG 1540/phosphate system, pH 7.0, raises the peroxidase partition coefficient 13.5-fold without important changes in that of total horseradish root proteins. Moreover, these conditions allow direct homogenization of theA. rusticana roots with the selected aqueous two-phase system with the clear top phase containing over 90% of the enzyme and the purification factor being 4.8.     

Partitioning of Porcine Pancreatic Lipase in a Two-Phase Systems of Polyethylene Glycol/Potassium Phosphate Aqueous

The hydrolysis of triglycerides at the oil–water interface, synthesis of esters and transesterification in microaqueous conditions are catalysed by lipase. For its application, a proper purification method was necessary. This study examined the application of an aqueous two-phase system to partition porcine pancreatic lipase. The influence of molecular weight and concentration of polyethylene glycol (PEG), tie line length (TLL), potassium phosphate concentration, sodium chloride (NaCl) addition and temperature in the partition was studied. The enzyme was more efficiently purified in PEG 8,000 at 14.5 °C (PF?=?3.89-fold), presenting more recoveries at the top phase with shorter TLL and lower concentrations of PEG and potassium phosphate. Moreover, the increase of these variables repressed the purification and the further addition of NaCl did not promote the purification of the enzyme. These results demonstrated the efficiency of the aqueous two-phase system on lipase purification.     

Affinity partitioning of human antibodies in aqueous two-phase systems

The partitioning of human immunoglobulin (IgG) in a polymer-polymer and polymer-salt aqueous two-phase system (ATPS) in the presence of several functionalised polyethylene glycols (PEGs) was studied. As a first approach, the partition studies were performed with pure IgG using systems in which the target protein remained in the bottom phase when the non-functionalised systems were tested. The effect of increasing functionalised PEG concentration and the type of ligand were studied. Afterwards, selectivity studies were performed with the most successful ligands first by using systems containing pure proteins and an artificial mixture of proteins and, subsequently, with systems containing a Chinese hamster ovary (CHO) cells supernatant. The PEG/phosphate ATPS was not suitable for the affinity partitioning of IgG. In the PEG/dextran ATPS, the diglutaric acid functionalised PEGs (PEG-COOH) displayed great affinity to IgG, and all IgG could be recovered in the top phase when 20% (w/w) of PEG 150-COOH and 40% (w/w) PEG 3350-COOH were used. The selectivity of these functionalised PEGs was evaluated using an artificial mixture of proteins, and PEG 3350-COOH did not show affinity to IgG in the presence of typical serum proteins such as human serum albumin and myoglobin, while in systems with PEG 150-COOH, IgG could be recovered with a yield of 91%. The best purification of IgG from the CHO cells supernatant was then achieved in a PEG/dextran ATPS in the presence of PEG 150-COOH with a recovery yield of 93%, a purification factor of 1.9 and a selectivity to IgG of 11. When this functionalised PEG was added to the ATPS, a 60-fold increase in selectivity was observed when compared to the non-functionalised systems.     

Evaluation of a PEG/hydroxypropyl starch aqueous two‐phase system for the separation of monoclonal antibodies from cell culture supernatant

In this study, an aqueous two‐phase system (ATPS) with PEG and hydroxypropyl starch (HPS) was used to separate monoclonal antibody (mAb) from Chinese hamster ovary cell culture supernatant. The phase diagram of the PEG/HPS ATPS was determined, and the effects of NaCl addition were investigated. The results showed that NaCl addition could lead to a shift of the binodal curve and that phase separation would occur at higher PEG and HPS concentrations. The effects of NaCl addition, pH, and the load of cell supernatant on the partitioning of mAb in a PEG/HPS ATPS were investigated. It was found that with 6% cell supernatant and 15% NaCl addition at pH 6.0, the yield of mAb in the upper phase was 96.7% with a purity of 96.0%. The back‐extraction of mAb with a PEG/phosphate ATPS were also studied, and the results showed that after the two‐step extraction with ATPSs the purity of mAb could reach 97.6 ± 0.5% with a yield of 86.8 ± 1.0%, which was comparable to the purification with Protein A chromatography. These results indicate that the two‐step extraction with PEG/HPS and PEG/phosphate ATPSs might be a promising alternative for the separation of mAb from cell culture supernatant.     

'Heat-treatment aqueous two phase system' for purification of serine protease from Kesinai (Streblus asper) leaves

A 'Heat treatment aqueous two phase system' was employed for the first time to purify serine protease from kesinai (Streblus asper) leaves. In this study, introduction of heat treatment procedure in serine protease purification was investigated. In addition, the effects of different molecular weights of polyethylene glycol (PEG 4000, 6000 and 8000) at concentrations of 8, 16 and 21% (w/w) as well as salts (Na-citrate, MgSO? and K?HPO?) at concentrations of 12, 15, 18% (w/w) on serine protease partition behavior were studied. Optimum conditions for serine protease purification were achieved in the PEG-rich phase with composition of 16% PEG6000-15% MgSO?. Also, thermal treatment of kesinai leaves at 55 °C for 15 min resulted in higher purity and recovery yield compared to the non-heat treatment sample. Furthermore, this study investigated the effects of various concentrations of NaCl addition (2, 4, 6 and 8% w/w) and different pH (4, 7 and 9) on the optimization of the system to obtain high yields of the enzyme. The recovery of serine protease was significantly enhanced in the presence of 4% (w/w) of NaCl at pH 7.0. Based on this system, the purification factor was increased 14.4 fold and achieved a high yield of 96.7%.     

Prediction of the partitioning behaviour of proteins in aqueous two-phase systems using only their amino acid composition

The prediction of the partition behaviour of proteins in aqueous two-phase systems (ATPS) using mathematical models based on their amino acid composition was investigated. The predictive models are based on the average surface hydrophobicity (ASH). The ASH was estimated by means of models that use the three-dimensional structure of proteins and by models that use only the amino acid composition of proteins. These models were evaluated for a set of 11 proteins with known experimental partition coefficient in four-phase systems: polyethylene glycol (PEG) 4000/phosphate, sulfate, citrate and dextran and considering three levels of NaCl concentration (0.0% w/w, 0.6% w/w and 8.8% w/w). The results indicate that such prediction is feasible even though the quality of the prediction depends strongly on the ATPS and its operational conditions such as the NaCl concentration. The ATPS 0 model which use the three-dimensional structure obtains similar results to those given by previous models based on variables measured in the laboratory. In addition it maintains the main characteristics of the hydrophobic resolution and intrinsic hydrophobicity reported before. Three mathematical models, ATPS I-III, based only on the amino acid composition were evaluated. The best results were obtained by the ATPS I model which assumes that all of the amino acids are completely exposed. The performance of the ATPS I model follows the behaviour reported previously, i.e. its correlation coefficients improve as the NaCl concentration increases in the system and, therefore, the effect of the protein hydrophobicity prevails over other effects such as charge or size. Its best predictive performance was obtained for the PEG/dextran system at high NaCl concentration. An increase in the predictive capacity of at least 54.4% with respect to the models which use the three-dimensional structure of the protein was obtained for that system. In addition, the ATPS I model exhibits high correlation coefficients in that system being higher than 0.88 on average. The ATPS I model exhibited correlation coefficients higher than 0.67 for the rest of the ATPS at high NaCl concentration. Finally, we tested our best model, the ATPS I model, on the prediction of the partition coefficient of the protein invertase. We found that the predictive capacities of the ATPS I model are better in PEG/dextran systems, where the relative error of the prediction with respect to the experimental value is 15.6%.     

Aqueous two-phase partitioning of milk proteins

Milk of transgenic pigs secreting recombinant human Protein C (rHPC) was used as a model system to determine the utility of aqueous two-phase extraction systems (ATPS) for the initial step in the purification of proteins from milk. The major challenges in purification of recombinant proteins from milk are removal of casein micelles (that foul processing equipment) and elimination of the host milk proteins from the final product. When milk was partitioned in ATPS composed of polyethylene glycol (PEG) and ammonium sulfate (AS), the phases were clarified and most of the caseins precipitated at the interphase. The partition coefficients of the major milk proteins and rHPC were dependent upon the molecular weight of the PEG used in the ATPS. Higher-partition coefficients of the major whey proteins, Β-lactoglobulin, and α-lactalbumin were observed in ATPS made up of lower molecular-weight PEG (1000 or 1450) as compared to systems using higher molecular-weight PEG. Lowering the pH of the ATPS from 7.5 to 6.0 resulted in increased precipitation of the caseins and decreased their concentration in both phases. rHPC had a partition coefficient of 0.04 in a system composed of AS and PEG 1450. The rHPC in pig milk was shown to be highly heterogenous by two-dimensional gel electrophoresis. The heterogeneity was owing to inefficient proteolytic processing of the single chain to the heterodimeric form and differences in glycosylation and other post-translational processing. Differential partitioning of the multiple forms of purified rHPC in the ATPS was not observed. rHPC after processing in ATPS was recovered in a clear phase free of most major milk proteins. ATPS are useful as the initial processing step in the purification of recombinant proteins from milk because clarification and enrichment is combined in a single step.     

Partition Efficiency of High-Pitch Locular Multilayer Coil for Countercurrent Chromatographic Separation of Proteins Using Small-Scale Cross-Axis Coil Planet Centrifuge and Application to Purification of Various Collagenases with Aqueous-Aqueous Polymer Phase Systems

Partition efficiency of the high-pitch locular multilayer coil was evaluated in countercurrent chromatographic (CCC) separation of proteins with an aqueous-aqueous polymer phase system using the small-scale cross-axis coil planet centrifuge (X-axis CPC) fabricated in our laboratory. The separation column was specially made by high-pitch (ca 5 cm) winding of 1.0 mm I.D., 2.0 mm O.D. locular tubing compressed at 2 cm intervals with a total capacity of 29.5 mL. The protein separation was performed using a set of stable proteins including cytochrome C, myoglobin, and lysozyme with the 12.5% (w/w) polyethylene glycol (PEG) 1000 and 12.5% (w/w) dibasic potassium phosphate system (pH 9.2) under 1000 rpm of column revolution. This high-pitch locular tubing yielded substantially increased stationary phase retention than the normal locular tubing for both lower and upper mobile phases. In order to demonstrate the capability of the high-pitch locular tubing, the purification of collagenase from the crude commercial sample was carried out using an aqueous-aqueous polymer phase system. Using the 16.0% (w/w) PEG 1000 - 6.3% (w/w) dibasic potassium phosphate - 6.3% (w/w) monobasic potassium phosphate system (pH 6.6), collagenase I, II, V and X derived from Clostridium hystolyticum were separated from other proteins and colored small molecular weight compounds present in the crude commercial sample, while collagenase N-2 and S-1 from Streptomyces parvulus subsp. citrinus were eluted with impurities at the solvent front with the upper phase. The collagenase from C. hystolyticum retained its enzymatic activity in the purified fractions. The overall results demonstrated that the high-pitch locular multilayer coil is effectively used for the CCC purification of bioactive compounds without loss of their enzymatic activities.     

Two Step Purification of <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. Lipase and Its Evaluation as a Detergent Additive at Low Temperatures

Acinetobacter sp. lipase was purified to homogeneity by a two-step process. The crude enzyme (along with biomass) was subjected to partial purification by aqueous two phase system (ATPS), avoiding centrifugation and filtration steps. Conditions for lipase partitioning by ATPS were optimized by response surface methodology (RSM) and a combination of 29.45% polyethylene glycol 8000, 15.5% phosphate, and a pH of 7.0 resulted in an optimal partition coefficient. Partially pure lipase was further purified by a modified batch process using Octyl Sepharose CL-4B in a vacuum filtration apparatus. This two-step process resulted in a purified lipase with a yield of 74.6% having a specific activity of 88.8 U/mg of protein and a purification fold of 14.92. The homogeneity of the lipase preparation obtained by the purification process was confirmed by reversed phase high performance liquid chromatography profile. The molecular weight of the purified lipase was found to be around 32 kDa as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified lipase exhibited pH and temperature optima of 8.5 and 37 degrees C, respectively. The lipase was active at low temperatures and it retained 86.8% activity at 10 degrees C. It also displayed other features such as stability over a broad range of pH (3.0-9.0) as well as stability in the presence of hydrogen peroxide and commercial detergents. Based on these characteristics, the potential of this lipase as an additive in laundry detergent formulation was evaluated under low temperature wash conditions. The results indicated that Acinetobacter sp. lipase increased the washing efficiency of the detergent Nirma by 21-24% at 15 degrees C-20 degrees C, respectively.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

System Establishment of ATPS for One-Step Purification of Glutamate Decarboxylase from <Emphasis Type="Italic">E. coli</Emphasis> After Cell Disruption

The partition of glutamate decarboxylase (GAD) from Escherichia coli in polyethylene glycol (PEG) and sodium sulfate aqueous two-phase systems (ATPS) has been explored with the purpose of establishing a phase system for the purification of GAD after cell disruption. The results showed that the partitioning of GAD was slightly influenced by PEG molecular weight (MW) but depended on the tie line length (TLL) and NaCl and loading sample concentrations. The optimum system obtained for GAD purification was composed of a PEG MW of 4,000, TLL of 63.5%, a volume ratio of 2.31, a loading sample concentration of 0.4 g/mL, which produced a GAD recovery of 90% with the purification fold of 73. Furthermore, the feasibility of directly purifying GAD from the cell disrupts using ATPS was evaluated. The established ATPS for GAD purification exhibited an efficient integrated purification process compared to the reported purification process in terms of purification efficiency and recovery.     

Extraction of endoglucanase I (Ce17B) fusion proteins from Trichoderma reesei culture filtrate in a poly(ethylene glycol)-phosphate aqueous two-phase system

Endoglucanases (EGI) (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Ce17B) of Trichoderma reesei are industrially important enzymes. Thus, there is a great need for development of a primary recovery method suitable for large-scale utilization. In this study we present a concept applicable for large-scale purification of an EGI fusion protein by one-step extraction in a poly(ethylene glycol) PEG-sodium/potassium phosphate aqueous two-phase system. EGI is a two-module enzyme composed of an N-terminal catalytic module and a C-terminal cellulose binding module (CBM) separated by a glycosylated linker region. Partitioning of six different EGI constructs, containing the C-terminal extensions (WP)2, (WP)4 or the amphiphilic protein hydrophobin I (HFB) of T. reesei instead of the CBM were studied to evaluate if any of the fusions could improve the partition coefficient sufficiently to be suitable for large-scale production. All constructs showed improved partitioning in comparison to full length EGI. The (WP)4 extensions resulted in 26- to 60-fold improvement of partition coefficient. Consequently, a relative minor change in amino acid sequence on the two-module protein EGI improved the partition coefficient significantly in the PEG 4000-sodium/potassium phosphate system. The addition of HFBI to EGI clearly enhanced the partition coefficient (K=1.2) in comparison to full-length EGI (K=0.035). Partitioning of the construct with (WP)4 fused to the catalytic module and a short sequence of the linker [EGI(core-P5)(WP)4] resulted in the highest partition coefficient (K=54) and a yield of 98% in the PEG phase. Gel electrophoresis showed that the construct with the (WP)4 tag attached after a penta-proline linker could be purified from the other bulk proteins by only a single-step separation in the PEG 4000-sodium/potassium phosphate system. This is a major improvement in comparison with the previously studied model (ethylene oxide-propylene oxide)-dextran system. Hence, this construct will be suitable for further optimization of the extraction of the enzyme in a PEG 4000-sodium/potassium phosphate system from culture filtrate.     

Performance of an aqueous two‐phase‐based countercurrent chromatographic system for horseradish peroxidase purification

Countercurrent chromatography (CCC) purification of horseradish peroxidase (HRP) from Armoracia rusticana root extracts was achieved by employing polymer‐phosphate aqueous two‐phase systems (ATPS). By using preparative columns at 1000 rpm, a 25–30% retention of the top phase of an ATPS composed of 10% w/w PEG 1540 and 14.8% w/w phosphate – with added 2 mol/kg sodium chloride – was obtained. The retention level was stable during the standard separation running time (4 h). Horseradish root extract samples were injected into the system (10–25 mL; 200–250 U/mL peroxidase; 2.0–4.0 mg/mL total protein). Retention of HRP in the CCC “column” during the chromatographic run was attained in the selected ATPS, where the partition coefficient K for the enzyme was ≥ 8. Replacement of the mobile phase with a fresh one but in the absence of added salt brought about product elution. Recovery of HRP in this fraction accounts for ≥ 45% of the total activity loaded, with a purification factor of 6. Enzyme activity was also found in the pass‐through fraction and in the remaining liquid (stationary) phase, a fact that should be ascribed to the existence of multiple peroxidase isoforms. SDS‐PAGE of the active fraction showed a protein band at 44 kDa, compatible with the presence of HRP. Thus, the optimised CCC system allowed the separation of HRP directly from a complex biological material. These results open up the possibility of achieving protein separation with CCC/ATPS and of scaling‐up processes in industrial separators.     

Selective separation and enrichment of proteins in aqueous two-phase extraction system

A simple aqueous two-phase extraction system(ATPS) of PEG/phosphate was proposed for selective separation and enrichment of proteins.The combination of ATPE with HPLC was applied to identify the partition of proteins in two phases.Five proteins (bovine serum albumin,Cytochrome C,lysozyme,myoglobin,and trypsin) were used as model proteins to study the effect of phosphate concentration and pH on proteins partition.The PEG/phosphate system was firstly applied to real human saliva and plasma samples,some pro...     

Development of an aqueous two-phase partitioning system for fractionating therapeutic proteins from tobacco extract

In the present study, an aqueous two-phase partitioning system (ATPS) was developed and evaluated as an initial fractionation step for therapeutic antibodies and enzymes from tobacco extracts. A detailed study has been performed to analyze the effect of pH, ionic composition of the system, types of polymers and their molecular weight and concentration, on the partitioning behavior of tobacco proteins and human anti-human immunodeficiency virus (HIV) monoclonal antibody 2F5 (mAb 2F5). A polyethyleneglycol/phosphate (PEG/Pi) aqueous two-phase system composed of 12% (w/w) PEG 1500 and 13% (w/w) phosphate buffer, pH 5, was selected as the system with the highest selectivity of antibody over native tobacco proteins. Under selected conditions, sufficient purification (3-4-fold) with high recovery at the bottom phase (approximately 95%) was achieved for mAb 2F5. In addition, the system allows removal of plant-derived compounds, such as phenolics and toxic alkaloids. The antibody fraction may be directly applied to a Protein A affinity column without any further pre-treatment, thus allowing homogenous antibody preparation. Analysis of the purified antibody fraction by enzyme-linked immunosorbent assay (ELISA) and western blot showed that the antibody was fully active and free of degraded variants or modified forms. The efficacy of the system was further demonstrated using additional proteins and enzymes of therapeutic importance, such as neuraminidase (NA) from influenza virus and human anti-HIV monoclonal antibody 2G12 (mAb 2G12), and showed that the system may find wide applicability as an economic extraction strategy for the initial fractionation of biopharmaceuticals from transgenic tobacco plants.     

Synthesis of a Novel pH-Sensitive Methacrylate Amphiphilic Polymer and Its Primary Application in Aqueous Two-phase Systems

In this study, a novel pH-sensitive and reversible water-soluble polymer(P(ABC)) forming aqueous two-phase systems(ATPS) was synthesized by using 2-(dimethylamino)ethyl methacrylate, t-butyl methacrylate, and methyl methacrylate as monomers and 2,2'-azo-bis-isobutyronitrile as initiator. The P(ABC) could be recovered by adjusting isoelectric point (PI) to 8.4, and recovery at PI could reach 95%. ATPS was formed by 5% (w/w) P(ABC) and 10% (w/w) PEG20000. The partition coefficient K of lysozyme was 6.8, and the partition coefficient K of bovine serum albumin could reach 12.5 in the ATPS.     

Xylanase recovery effect of extraction conditions on the aqueous two-phase system using experimental design

The partitioning of xylanase produced byPenicillium janthinellum in aqueous two-phase systems (ATPS) using poly(ethylene glycol) (PEG) and phosphate (K₂HPO₄/KH₂PO₄) was studied employing a statistical experimental design. The aim was to identify the key factors governing xylanase partitioning. The interactions of five factors (PEG concentration molecular weight, concentration of buffer K₂HPO₄/KH₂PO₄, pH, and NaCl concentration) and their main effects on the partition coefficient (K) were evaluated by means of a 2⁵ full-factorial experimental design with four center points. The %PEG, %NaCl, and pH were the most important factors affecting the response variable (K). Response surface methodology (RSM) was adopted and an empirical second-order polynomial model was constructed on the basis of the results. The optimum partition conditions were pH 7.0, PEG = 8.83% and NaCl = 6.02%. Adequacy of the model for predicting optimum response value was tested under these conditions. The experimental xylanase partition coefficient (K) was 2.21, whereas its value predicted by the model was 2.33. These results indicate that the predicted model was adequate for the process. PEG molecular weight and phosphate concentration did not affect the xylanase partition coefficient.     

New small-scale cross-axis coil planet centrifuge. Partition efficiency and application to purification of bullfrog ribonuclease

The new small-scale cross-axis coil planet centrifuge (X-axis CPC) previously designed and fabricated in our laboratory has a distinctive feature such that four separation columns of similar weight are mounted symmetrically around the rotary frame to achieve stable balancing of the centrifuge under a high revolution speed. In this column layout, neighboring columns must be rotated in the opposite direction if viewed from the center of the centrifuge to avoid twisting the interconnecting flow tubes. The effect of rotational direction of the columns on the partition efficiency was evaluated with separation of a set of test samples such as cytochrome c, myoglobin, and lysozyme using an aqueous-aqueous polymer phase system composed of 12.5% (w/w) polyethylene glycol (PEG) 1000 and 12.5% (w/w) dibasic potassium phosphate under 1000 rpm of column revolution. A series of experiments was performed using a set of two diagonally located columns (connected in series) each consisting of five coiled layers of 1 mm I.D. with a total capacity of 27.0 mL. Both right- and left-handed coils were tested each under the optimized conditions for choice of mobile phase and direction of the column rotation so that the satisfactory volume of the mobile phase was retained in the column by the aid of Archimedean screw effect. The results of these studies showed that one particular combination of handedness of the coil and direction of the rotation yielded the best peak resolution for each mobile phase. In order to demonstrate the capability of the apparatus, the purification of ribonuclease (RNase) from the extract of bullfrog egg, sialic acid binding lectin (cSBL), was carried out using both organic-aqueous and aqueous-aqueous polymer phase systems. When using the 16.0% (w/w) PEG 1000-6.3% (w/w) dibasic potassium phosphate-6.3% (w/w) monobasic potassium phosphate system, cSBL was successfully separated from other proteins present in the extract while commercial RNase A was eluted at near the solvent front by the lower phase mobile. The cSBL retained its native RNase activity. The overall results demonstrated that the present new small-scale X-axis CPC is useful for the purification of bioactive compounds without loss of their native activities.