Topological complexity of potential surfaces and application to C2H2 molecule

Summary In this work, we search for the simplest complete surfaces of systems with three and four atoms, i.e. the minimal sets of critical points with their index, which are topologically consistent in the whole configuration space. Then we show the smallest change in the A₂B₂ system by requiring at least one stable acetylene configuration and one stable vinylidene configuration, like on the C₂H₂ surface. Finally, we give complete sets of minima, saddle points and maxima obtained for C₂H₂ with analytical potentials proposed in the literature and with a semi-empirical method at the CAS-CI level.     

Effects of Feed Composition of Coke Oven Gas on a Layered Bed H2 PSA Process

The effects of feed composition on the adsorption dynamics and the optimal process design were studied from the experimental and simulated results in the H₂ layered bed PSA with activated carbon and zeolite 5A. The breakthrough results using the base composition (56.4 vol% H₂; 26.6 vol% CH₄; 8.4 vol% CO; 5.5 vol% N₂; and 3.1 vol% CO₂) in various layered beds were compared with those using the higher nitrogen composition and the no nitrogen composition. In the breakthrough dynamics, the propagation velocity of wave front of each component was closely related to the slope of isotherm estimated at its concentration in the feed. Breakthrough behavior at each layered bed in the higher nitrogen composition showed similar trends as that in the base composition. However, the no nitrogen composition showed different breakthrough behavior from the other groups. In this feed composition, it was observed that the order of CO and CH₄ breakthrough times was reversed with a change in the carbon-to-zeolite ratio. Based on the adsorption dynamics and breakthrough behavior of each feed composition group in various layered beds, the effect of feed composition on a seven-step two-bed PSA process for the H₂ recovery from coke oven gas was investigated numerically to develop a well-designed H₂ PSA process under various operating conditions. As expected from the breakthrough results, the trends of the PSA performance in the higher nitrogen composition were similar to those in the base composition except for the slight decrease in the optimal carbon-to-zeolite ratio. However, in case of the no nitrogen composition, high purity product was obtained from the activated carbon-rich layered bed PSA because the adsorption capacity of the activated carbon for impurities was superior to that of zeolite. As a result, the optimum carbon-to-zeolite ratio at each operating condition was slightly changed depending on the propagation velocity of each component on each layer.     

Synthese und Strukturanalyse von Na3SbSe3·3Sb2O3·0,5Sb(OH)3

Investigations in the system Sb-Se-NaOH-H₂O, hydrothermal conditions, yielded crystals of the compound Na₃SbSe₃·3Sb₂O₃·0,5Sb(OH)₃. The structure of this compound (a=14.40 Å,c=5.568 Å; space group P 6₃-C ₆ ⁶ ;Z=2) was determined from 985 independent X-ray intensities — collected on an automaticWeissenberg type diffractometer — by thePatterson method and refined by the least squares method toR=8.3% (with -weighting 5.9%). The structure consists of SbO₃ pyramids which are connected via common oxygen corners to tubes parallel [001]. These tubes and SbSe₃ pyramids are combined by Na atoms to a framework. The Sb(OH)₃ groups are statistically located within the channels of the tubes.

     

Determination of components of the order parameter tensor of cholesteryl myristate by1H NMR data

The order parameter and orientation of the long axis of a cholesteryl myristate molecule have been determined by the second, fourth, and sixth moments of the¹H NMR line of a polycrystalline sample in the smectic phase. The effects of molecular diffusion in the cholesteric phase are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1269–1272, July, 1995.     

Natural flavours of wine: correlation between instrumental analysis and sensory perception

Summary The aroma of wine consists of 600 to 800 aroma compounds from which especially those, typical for the variety, are already present in the grapes. The aroma extracts — received by extraction with trichlorofluoromethane — are separated by gas chromatography. There are significant varietal differences between the aromagrams (fingerprint pattern). Thus the amount of some flavour compounds (key substances) shows typical dependence on the variety. Especially monoterpene compounds play an important role in the differentiation of wine varieties.The German white wines can be differentiated into three groups only by quantitative determination of 12 monoterpenes (terpene profile). These groups are: Riesling type, Muscat type and Silvaner-Weißburgunder type. Such terpene profiles are also useful for the separation of real Riesling wines from others called Riesling (e.g. Welschriesling, Kap Riesling, Emerald Riesling) but not produced from grapes of the variety Riesling. Including further components and by means of statistical methods as for example linear discriminant analysis even the different varieties within the mentioned groups (for instance the Riesling-group: Riesling, Kerner, Ehrenfelser, Bacchus, Müller-Thurgau) can be separated from each other.To identify compounds causing off-flavours the sniffing technique is the method of choice. The off-flavour is pinpointed during gas chromatography separation of the complex aroma mixture by effluent sniffing. Once allocated, the chemical nature of the off-flavours is elucidated by spectroscopic methods. Substances contributing to the green pepper taint, the strawberry note, mousiness, corkiness etc. in wine could be found in this way.     

The structures of macrocyclic heterocyclophane inclusion complexes

Crystal and molecular structures of (1:1) molecular complexes of N,N,N,N-tetramethyl-2, 11, 20, 29-tetraaza [3.3.3.3] paracyclophane (1) with CHCl₃, CH₂Cl₂, CH₃CN and CO₂ are reported. The macrocycle has square-box structure, giving hydrophobic cavity surrounded by four benzene rings. The guest molecules are included in the cavity. The uncomplexed1 was found to have a rectangular form, indicating large conformational flexibility of1. In solution,1 is achiral because rapid RS interconversion, but in solid, the macrocyclic conformation is frozen as R-conformer or S-conformer. The macrocycles with the same chirality are stacked alongb-axis to form chiral molecular columns, R-colums or S-columns. Complexes of1 crystallize differently depending on the guest molecules. R-columns (S-columns) packed alonga-axis produce R-layers (S-layers), which are further packed alongc-axis using R-layer to R-layer contact (RR) or SS and RS or SR. The crystals of1·CHCl₃ are formulated as--RRR--=[R]_n (Type I, chiral) and those of1·CH₃CN or1·CO₂ and1·CH₂Cl₂ are represented by [RS]_n (Type IIA, racemic) and [RRSS]_n (Type IIB, racemic), respectively.     

Simultaneous electrochemical and piezoelectric microgravimetry measurements of C60 films with a quartz crystal microbalance in a dimethylformamide-water mixed solvent solution containing potassium ions

Simultaneous electrochemistry and piezoelectric microgravimetry studies using electrochemical quartz crystal microbalance were carried out on solution cast C₆₀ films. These films could be reduced in dimethylformamide + water mixture containing potassium ions. It was established that the first reduction was a completely surface-confined process, while the second reduction produced dissolved species. Restricting the potential range only to the first reduction, we could observe reversible electrochemical transformation of the films. Measuring the mass changes of the electrodes during the electrochemical processes, we found that the simple voltammograms (single reduction and oxidation peaks) actually cover simultaneous processes. Both the reduction and the oxidation involved the movements of anions, cations and solvent molecules in and out of the films. It was measured that the initial behavior of the films varied randomly, probably depending on the unpredictable structure of the film produced by solution casting. However, the films adjusted themselves to the experimental conditions displaying steady-state behavior after a certain number of potential scans. This steady-state behavior could be reached independently of the original structure, or the amount of C₆₀ put on the surface, but it could be perturbed easily by altering the conditions. The films were self-adjusted to the measurements.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Plasma-assisted etching of aluminum in CCl4−Cl2 mixtures

The etching of aluminum has been studied in a diode reactor fed with CCl₄–Cl₂ mixtures. The overall reaction has been found to be influenced by the contemporaneous deposition of low-volatile etch products and/or a chlorocarbon polymer film originating from the polymerization of CCl_x species. A simple approach is described which allows the chemical contribution to the etch process to be distinguished from the physical one of through-film diffusion. The etching of a clean Al surface is shown to be controlled by chlorine chemisorption at low temperature.Work partially supported by Progetto Finalinalizzato Materiali per l'Elettronica a Stato Solido del CNR and by the Italian Ministry of Education (MPI).     

Simulation of the molecular and electronic structure of C60 fullerene π-complex with twelve half-sandwich species FeC5H5

The problem of existence of ⁵--complexes of fullerenes and their derivatives is discussed. The stability of the ⁵--complex C₆₀(FeCp)₁₂ (viz., icosahedral C₆₀ fullerene coated with twelve FeCp groups, each coordinated to its own pentagonal face of the fullerene cage) was first estimated in the framework of density functional approach (PBE approximation). The molecular and electronic structure of a biradical complex of C₆₀ fullerene with ten FeCp groups, C₆₀(FeCp)₁₀ (D _5d symmetry), and a 2⁵--complex of substituted fullerene H₁₀C₆₀, H₁₀C₆₀(FeCp)₂ (D _5d symmetry) in which hydrogen atoms are attached to the C atoms in the -positions relative to the atoms of the polar five-membered cycles, was simulated. According to calculations, the coated complex, I _h-C₆₀(FeCp)₁₂, should be much more stable than the complex of naked fullerene with one or two polarly located FeCp groups and only slightly less stable than the ferrocene molecule FeCp₂. The existence of C₆₀(FeCp)₁₂ and H₁₀C₆₀(FeCp)₂ complexes was suggested.     

1H NMR study of inclusion of substituted bicyclo[3.3.1]nonanes in α- and β-cyclodextrins

The interaction of 2,6-disubstituted bicyclo[3.3.1]nonanes with - and -cyclodextrins has been investigated by¹H NMR spectroscopy and the formation of (11) host—guest complexes has been established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2523–2525, December, 1995.     

Synthesis of micron-sized, monodisperse polymer particles of disc-like and polyhedral shapes by seeded dispersion polymerization

Micron-sized, monodisperse polymer particles having unique disc-like and polyhedral shapes were produced by seeded dispersion polymerization of various methacrylates with 1.57 m-sized polystyrene seed particles in the presence of saturated hydrocarbon droplets in methanol/water. Such nonspherical shapes were controllable by the polymerization conditions.Part CCLX of the series Studies on Suspension and Emulsion     

Philosophical aspects of chemometrical strategy in Analytical Chemistry

Summary This paper discusses the philosophical aspects of the three main chemometrical strategies in analytical chemistry: statistical data treatment, optimization and modelling, pattern recognition. It is possible by a more general consideration of these approaches to find a proper place of different philosophical categories such as form and content, induction and deduction, concrete and general in analytical chemistry. The philosophical aspect of the considerations allows a deeper penetration into the theoretical basis of chemical analysis.

---

Philosophische Betrachtungen zu chemometrischen Strategien in der Analytischen Chemie

---

Presented at the First International Symposium on History and Philosophy in Analytical Chemistry, Vienna, November 22–23, 1985     

Ab initio valence bond calculations and the spin-paired diradical character of S 4 2+

The results of some ab initio valence bond calculations, with STO-6G basis sets for the s and p orbitals, are reported for the ground state of cyclic S ₄ ²⁺ . The sum of the weights for two long-bond (or spin-paired diradical) structures is approximately 50% of the total.     

Insect pheromones and their analogs. LX. Stereocontrolled synthesis of sex pheromones ofDrosophila mulleri andMayetiola destructor

Syntheses are developed for 2S-tridecyl- and 2S-tridec-10E-enylacetates, sex pheromones of the fruit flyDrosophila mulleri and the Hessian flyMayetiola destructor, respectively, that are based on ethyl-3S-hydroxybutanoate, a product from enzymatic reduction of ethyl acetoacetate by the soil yeast strain 80-1.Work performed under the auspices of the Federal program Integratsiya of the RF (Contract No. A 0005).Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 167–169, March–April, 2000.     

Thermal analysis of macromolecules

This review traces the development of thermal analysis over the last 40 years as it was experienced and contributed to by the author. The article touches upon the beginning of calorimetry and thermal analysis of polymers, the development of differential scanning calorimetry (DSC), single run DSC and other special instrumentations, up to the recent addition of modulation to calorimetry. Many new words and phrases have been introduced to the field by the author and his students, leaving a trail of the varied interests one can have over 40 years. It began with cold crystallization and most recently the term oriented, intermediate phase was coined, creating in-between: extended chain crystals, the irreversible thermodynamics of melting of polymer crystals, dynamic differential thermal analysis (DDTA), the rule of constant increase ofC _p per mobile bead within a molecule at the glass transition temperature, superheating of polymer crystals, melting kinetics, crystallization during polymerization, the chain-folding principle, molecular nucleation, rigid amorphous phase, a system of classifying molecules, macroconformations, amorphous defects, rules for the entropy of fusion based on molecular shape and flexibility, single-molecule single-crystals, a system of classifying phases and mesophases, and condis phase.First and foremost I would like to acknowledge the unwavering support through my wife, Heidel, without whom many of the projects simply could not have been completed. Similarly, our children had to grow up knowing that often research and teaching had to take precedence. Without coworkers, little could have been accomplished. Of the about 120 postdoctoral fellows, graduate students, and technicians, most of whom contributed to the listed references, and many have participated on their own in this issue, goes my thanks for the bulk of the scientific work. Many friends and colleagues contributed with discussion and constructive criticism, some of them have also contributed in this collection of papers related to thermal analysis. Little work can be done without this interplay of ideas. The limited space has not permitted to give a full appreciation of the importance of the ideas drawn from the literature. These thousands of additional references can be found in the initial papers and reviews of the subjects treated.Material support was received from the three major instrument companies for thermal analysis equipment: TA Instruments, Inc.; Perkin-Elmer Corp.; and Mettler-Toledo, Inc. Without this help we would not always have been able to be at the forefront of instrumentation. Major financial support for the research came from outside the universities. I estimate that over the 40 years about 4 Megadollars were spent by government agencies, companies, and private foundations to support coworkers, myself during the summers, research equipment, expenses, and travel. A large amount of money, but not too much if one compares it to typical expenditures in the field of athletics (about 10 k$ per paper). Major sustained funding came from the Advanced Projects Agency (ARPA), the Office of Naval Research (ONR), the National Aeronautics and Space Agency (NASA), the Department of Energy (DOE), and, most prominently, the National Science Foundation (NSF). At present our work is supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U.S. Department of Energy, under Contract DE-AC05-84OR21400 with Lockheed Martin Energy Systems, Inc. Industrial support is presently given by TA Instruments, Inc; ICI Paints; Exxon Res. and Eng. Co.; Shell Development Co.; Toray Research Center; and Mettler-Toledo, Inc.Last, but by no means least, I would like to thank Dr. E. Turi for the invitation to write this paper and for her untiring effort to entice so many of my students and friends to contribute to this issue of the Journal of Thermal Analysis.     

r 12-Dependent terms in the wave function as closed sums of partial wave amplitudes for large l

The ansatz = (1+1/2r₁₂)+ with the bare nuclear (or screened nuclear) wave function and expanded in products of one-electron functions is explored for second-order perturbation theory and for variational calculations of the ground state of Helium-like ions.The energy increments E _l ⁽²⁾ corresponding to the partial wave expansion of go asymptotically as l^–8, while conventional partial wave increments go as l^–4. is coupled to by a residual interaction U₁₂ that has no singularity for r₁₂=0. With the present ansatz it is sufficient to include l-values up to 5 in order to get the second-order energy accurate to one microhartree. For the same accuracy l4 is sufficient in a CI with correlated reference function while in conventional CI one must go to l50. The surprisingly faster convergence of the variational approach as compared to second-order perturbation theory is explained. The slow convergence of the traditional partial wave expansion is entirely due to the attempt to represent the quantity 1=¦r₁₂r₁₂ ^–1¦ by its partial wave expansion. The best reference function shows very little shielding and resembles closely the eigenstate of the bare nuclear Hamiltonian. The generalization to arbitrary systems is discussed and it is pointed out that the calculation of difficult integrals can be avoided without a significant loss in accuracy.     

Determination of total,and bound Se in sera by INAA

In this study we report on the comparison between the total selenium in serum (total Se) with that which is apparently bound to high molecular weight (>12,000 D) species, presumably proteins (bound Se). Nine hundred seventy seven (977) serum samples arising out of a population-based epidemiological study were prepared in duplicate for the determination of total Se by pipeting directly into irradiation vials; and separate duplicate aliquots were dialyzed against DI water for the determination of bound Se. All samples were analyzed by neutron activation analysis via^77mSe (17.4 s). A small dialyzable Se component (6%) (free Se), defined as the difference between the total Se minus the bound Se, was identified.     

Theoretical am1 studies of inclusion complexes of α- and β-cyclodextrins with methylated benzoic acids and phenol,and γ-cyclodextrin with buckminsterfullerene

Semiempirical AM1 calculations have been performed on the inclusion complexes of - and -cyclodextrin with benzoic acid and phenol and -cyclodextrin with methylated benzoic acids in the head first and tail first positions. The results show that -cyclodextrin complexes with phenol and benzoic acid guests in the head first position are more stable than in the tail first position, while -cyclodextrin complexes with the same guests prefer the tail first position. The preferred orientation for -cyclodextrin with methylated benzoic acids is determined by the position of the methyl substituent(s). In general, para-methyl benzoic acid derivatives prefer the tail first position. -cyclodextrin forms a slightly unstable 1:1 complex with C₆₀ (3.4 kcal/mol), but two -cyclodextrins provide enough stabilization by about 10 kcal/mol to cage-in the C₆₀.     

Theories of binding in H 2 +

Summary A common, traditional potential energy expression for the theoretical binding energy in the simplest LCAO treatment of H ₂ ⁺ (i.e. using 1s eigenfunctions of the atoms) is derived in the context of Ruedenberg's theory, by virtue of a cancellation between the interference kinetic energy and an identifiable positive part of the interference potential energy arising from charge moving away from dative protons. Thus, although electron sharing raises the total potential energy, its net contribution to the binding energy may be equated to the negative part of the interference potential energy which is due to charge moving towards opposite protons. It is shown that this potential energy expression remains approximately valid when the atomic orbitals are optimally scaled. For contracted orbitals, the cancellation within the interference energy is not exact, and the explanation of contraction through the variation principle is less transparent from a potential energy viewpoint than it is in Ruedenberg's analysis. However, when the orbitals are both contracted and polarised the cancellation is closer to being exact, and the minimisation of the total energy is achieved through competition between the term representing the atomic promotion and deformation energy on the one hand, and the usual potential energy expression on the other.     

Computer-aided library search of combined LC-Retention and diode-array-UV-spectral data

An automated library search system for computer-aided identification of organic compounds using combined UV-spectral and LC-retention data, as acquired by HPLC with linear diodearray-UV-detection, is presented.The keystone of the system is a set of similarity indices which have been developed on the basis of mathematical-statistical models of the reproducibility of the spectral and retention data. The similarity indices have the form of a significance probability, a quantity originating from the general theory of hypothesis testing. The output of the LC-UV retrieval system is a compound identity or a list of identities (if any) for which the relevant similarity index has a value above a preset threshold. The data base used in this investigation contained 186 sets of UV-spectral and LC-retention data of 74 organophosphorus pesticides measured from standard solutions under various experimental conditions. A test set consisted of 186 alternative data sets of the same compounds as contained in the data base, however measured under different experimental conditions. The performance of the LC-UV reproducibility-based retrieval (LUVRR) system was evaluated using recall/reliability plots. The results appeared to be quite promising: for 95% of the unknowns, the target reference (correct positive) was on top of the hit list with a similarity index value being significantly higher than values found for false positives.The software is written in Pascal. The present (experimental) version of the system runs on a Data General Eclipse MV/4000 minicomputer.