Heterometallic Pt-Ag and Pt2Ag transition metal complexes

Complexes of type {cis-[Pt](μ-σ,π-CCPh)₂}AgX (3a, [Pt] = (bipy′)Pt, X = FBF₃; 3b, [Pt] = (bipy′)Pt, X = FPF₅; 3c, [Pt] = (bipy)Pt, X = OClO₃; 3d, [Pt] = (bipy′)Pt, X = BPh₄; bipy′ = 4,4′-dimethyl-2,2′-bipyridine; bipy = 2,2′-bipyridine) are accessible by combining cis-[Pt](CCPh)₂ (1a, [Pt] = (bipy′)Pt; 1b, [Pt] = (bipy)Pt) with equimolar amounts of [AgX] (2a, X = BF₄; 2b, X = PF₆; 2c, X = ClO₄; 2d, X = BPh₄). In 3a-3d the platinum(II) and silver(I) ions are connected by σ- and π-bonded phenyl acetylide ligands. When the molar ratio of 1 and 2 is changed to 2:1 then trimetallic [{cis-[Pt](μ-CCPh)₂}₂Ag]X (8a, [Pt] = (bipy)Pt, X = BF₄; 8b, [Pt] = (bipy′)Pt, X = PF₆; 8c, [Pt] = (bipy)Pt, X = BF₄) is produced. The solid state structure of 8a was determined by single X-ray crystal structure analysis. In 8a the silver(I) ion is embedded between two parallel oriented cis-[Pt](CCPh)₂ units. Within this structural arrangement the phenyl acetylides of individual [Pt](CCPh)₂ entities possess a μ-bridging position between Pt(II) and Ag(I). In addition, a very weak dative Pt → Ag interaction is found (Pt-Ag 2.8965(3) Å). The respective silver carbon distances Ag-C_α (2.548(7), 2.447(7) Å) and Ag-C_β (3.042(7), 2.799(8) Å)(PtC_αC_βPh) confirm this structural motif.Complexes 8a-8c isomerize in solution to form trimetallic [{cis-[Pt](μ-σ,π-CCPh)₂}₂Ag]X (9a, [Pt] = (bipy)Pt, X = BF₄; 9b, [Pt] = (bipy′)Pt, X = PF₆; 9c, [Pt] = (bipy)Pt, X = ClO₄). In the latter molecules the organometallic cation [{cis-[Pt](μ-σ,π- CCPh)₂}₂Ag]⁺ is set-up by two nearly orthogonal positioned [Pt](CCPh)₂ entities which are hold in close proximity by the group-11 metal ion. Within this assembly all four PhCC units are η²-coordinated to silver(I). A possible mechanism for the formation of 9 is presented.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

Palladium(II)/allylpalladium(II) complexes with xanthate ligands: Single-source precursors for the generation of palladium sulfide nanocrystals

In an effort to find simple and common single-source precursors for palladium sulfide nanostructures, palladium(II) complexes, [Pd(S₂X)₂] (X = COMe (1), COⁱPr (2)) and η³-allylpalladium complexes with xanthate ligands, [(η³-CH₂C(CH₃)CR₂)Pd(S₂X)] (R = H, X = COMe (3); R = H, X = COEt (4); R = H, X = COⁱPr (5); R = CH₃, X = COMe (6)), have been investigated. The crystal structures of [Pd(S₂X)₂] (X = COMe (1), CoⁱPr (2)) and [(η³-CH₂C(CH₃)CH₂)Pd(S₂COMe)] (3) have been established by single crystal X-ray diffraction analysis. The complexes, 1, 2 and 3 all contain a square planar palladium(II) centre. In the allyl complex 3, this is defined by the two sulfurs of the xanthate and the outer carbons of the 2-methylallyl ligand, while in the complexes, 1 and 2 it is defined by the four sulfur atoms of the xanthate ligand. Thermogravimetric studies have been carried out to evaluate the thermal stability of η³-allylpalladium(II) analogues. The complexes are useful precursors for the growth of nanocrystals of PdS either by furnace decomposition or solvothermolysis in dioctyl ether. The solvothermal decomposition of complexes in dioctyl ether gives a new metastable phase of PdS which can be transformed to the more stable tetragonal phase at 320 °C. The nanocrystals obtained have been characterized by PXRD, SEM, TEM and EDX.     

Titanocene-based group-11 metal ions; solid-state structure of {[(η-C5H4SiMe3)2Ti(CCPh)2]2Ag}NO3

The reaction of [Ti](CCR)₂ {[Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; 1a, R = Fc, Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅); 1b, R = Ph} with MX {2a, MX = [Cu(NCCH₃)₄]BF₄; M = Ag; 2b, X = ClO₄; 2c, X = NO₃} in a 2:1 molar ratio produces the trinuclear heterobimetallic (Ti₂M) or heptanuclear heterotrimetallic (Ti₂MFe₄) complexes [{[Ti](μ-σ,π-CCR)₂}₂M]X (R = Fc: 3a, M = Cu, X = BF₄; 3b, M = Ag, X = ClO₄. R = Ph: 3c, M = Cu, X = BF₄; 3d, M = Ag, X = ClO₄: 3e, M = Ag, X = NO₃) in high yield. Complexes 3c-3e are also accessible, when {[Ti](μ-σ,π-CCPh)₂}MX (M = Cu: 4a, X = FBF₃; M = Ag: 4b, X = OClO₃; 4c, X = ONO₂) is reacted with one equivalent of 1b. Transferring this reaction scheme to [Ti](CCSiMe₃)₂ (1c) only the formation of the heterobimetallic tweezer complex {[Ti](μ-σ,π-CCSiMe₃)₂}MX {4d, MX = [Cu(NCCH₃)]BF₄; 4e, MX = AgOClO₃} is observed which is attributed to the bulkiness of the acetylide-bound Me₃Si group. The solid-state structure of 3e is reported. In 3e, two [Ti](CCPh)₂ tweezer moieties are chelate-bound by their carbon-carbon triple bonds to a silver(I) ion, resulting in a pseudo-tetrahedral environment at the group-11 metal. is acting as counter-ion to cationic [{[Ti](CCPh)₂}₂Ag]⁺.Additionally, the result of cyclic voltammetric studies on [{[Ti](μ-σ,π-CCPh)₂}₂Cu]BF₄ (3c) is reported.     

Rhenium(I) tricarbonyl complexes with bispyridine ligands attached to sulfur-rich core: Syntheses, structures and properties

Rhenium(I) tricarbonyl complexes with bispyridine ligands bearing sulfur-rich pendant, Re(CO)₃(Medpydt)X (Medpydt = dimethyl 2-(di(2-pyridyl)methylene)-1,3-dithiole-4,5-dicarboxylate; X = Cl, 1; X = Br, 2) and Re(CO)₃(MebpyTTF)X (MebpyTTF = 4,5-bis(methyloxycabonyl)-4′,5′-(4′-methyl-2,2′-dipyrid-4-ylethylenedithio)-tetrathiafulvalene; X = Cl, 5; X = Br, 6), were prepared from the reactions between Re(CO)₅X (X = Cl, Br) and Medpydt or MebpyTTF, respectively. Hydrolysis of the above complexes afforded the analogues with carboxylate derivatives, Re(CO)₃(H₂dpydt)X (X = Cl, 3; X = Br, 4) and Re(CO)₃(H₂bpyTTF)X (X = Cl, 7; X = Br, 8). The crystal structures for complexes 1 · 2H₂O, 5 and 6 were determined using X-ray single crystal diffraction. UV-Vis absorption spectra of the rhenium complexes show the intraligand and MLCT transitions. Electrochemical behaviors of all new compounds were studied with cyclic voltammetry. Upon irradiation, complexes 3-6 exhibit blue to red emissions in fluid solutions at the room temperature. The performance of complexes 3, 4, 7 and 8 as photosensitizers for anatase TiO₂ solar cells was preliminarily investigated as well.     

Syntheses and characterization of [(η-C6Me6)Ru(μ-N3)(X)]2 (X = N3 and Cl) complexes and their reactions towards mono- and bidentate ligands

The reaction of the complex [{(η⁶-C₆Me₆)Ru(μ-Cl)Cl}₂] 1 with sodium azide ligand gave two new dimers of the composition [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2 and [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3, depending upon the reaction conditions. Complex 3 with excess of sodium azide in ethanol yielded complex 2. These complexes undergo substitution reactions with monodentate ligands to yield monomeric complexes of the type [(η⁶-C₆Me₆)Ru(X)(N₃)(L)] {X = N₃, Cl, L = PPh₃ (4a, 9a); PMe₂Ph (4b, 9b); AsPh₃ (4c, 9c); X = N₃, L = pyrazole (Hpz) (5a); 3-methylpyrazole (3-Hmpz) (5b) and 3,5-dimethyl-pyrazole (3,5-Hdmpz) (5c)}. Complexes 2 and 3 also react with bidentate ligands to give bridging complexes of the type [{(η⁶-C₆Me₆)Ru(N₃)(X)]₂(μ-L)} {X = N₃, Cl, L = 1,2-bis(diphenylphosphino)methane (dppm) (6, 10); 1,2-bis(diphenylphosphino)ethane (dppe) (7, 11); 1,2-bis(diphenylphosphino)propane (dppp) (8, 12); X = Cl, L = 4,4-bipyridine (4,4′-bipy) (13)}. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as by analytical data.The molecular structures of the representative complexes [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2, [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3,[(η⁶-C₆Me₆)Ru(N₃)₂(PPh₃)] 4a and [{(η⁶-C₆Me₆)Ru(N₃)₂}₂ (μ-dppm)] 6 were established by single crystal X-ray diffraction studies.     

Diphenylphosphino(phenyl pyridin-2-yl methylene)amine palladium(II) complexes: Chemoselective alkene hydrocarboxylation initiators

The heteroditopic, P-N-chelating ligand diphenylphosphino(phenyl pyridin-2-yl methylene)amine (1) has been synthesised via a simple ‘one-pot’ procedure and its donor characteristics assessed. The neutral [MX(Y)(1-κ²-P-N)] (3, M = Rh, X = Cl, Y = CO; 4, M = Pd, X = Y = Cl; 5, M = Pd, X = Cl, Y = Me; 6, M = Pt, X = Y = Cl; 7, M = Pt, X = Cl, Y = Me; 8, M = Pt, X = Y = Me) and cationic [Pd(Me)(MeCN)(1-κ²-P-N)][Z] (9, Z = B{3,5-(CF₃)₂-C₆H₃}4; 10, Z = PF₆) complexes of 1 have been prepared and characterised. The solid-state structures of complexes 3, 4, 6 and 7 have been established by X-ray crystallography. Reactions of [PdCl(Me)(1-κ²-P-N)] towards CO and ^tBuNC have been investigated, affording the corresponding η¹-acyl (12) and -iminoacyl (14) complexes, respectively. Similar insertion chemistry is observed for the cationic derivative 9. Treatment of the acyl complex 12 with ethene at elevated pressure establishes an equilibrium between the starting material and the product resulting from insertion, 13. Under catalytic conditions, combination of palladium(II) with 1 in MeOH affords a selective initiator for the formation of 4-oxo-hexanoic acid methyl ester (15) from CO/ethene (38 bar, 90 °C).     

Bridged bis(amidinate) lanthanide complexes: Synthesis,molecular structure and reactivity

The yttrium chloride with the bridged bis(amidinate) L (L = Me₃SiNC(Ph)N(CH₂)₃NC(Ph)NSiMe₃) LYCl(DME) (2) was synthesized and structurally characterized. Treatment of LLnCl(sol)_x (Ln = Yb, sol = THF, x = 2 1; Ln = Y, sol = DME, x = 1 2) with the dilithium salt Li₂L(THF)_0.5 afforded the novel bimetallic lanthanide complexes supported by three ligands, Ln₂(μ₂-L)₃ · DME (Ln = Yb 3, Y 4; DME = dimethylether), instead of the designed complex LLn(μ₂-L)LnL via the ligand redistribution reaction. Complexes 3 and 4 were fully characterized including X-ray analysis and ¹H NMR spectrum for 4. Reaction of LnCl₃ (Ln = Yb, Y) with 2 equiv. of Li₂L(THF)_0.5 gave the anionic complexes [Li(DME)₃][L₂Ln] (Ln = Yb 5, Y 6), which were confirmed by a crystal structure determination. The further study indicated that complexes 3 and 4 can also be synthesized by reaction of LnCl₃ (Ln = Yb, Y) with 1.5 equiv. of Li₂L(THF)_0.5 or reaction of 1 and 2 with anionic complexes 5 and 6. Complexes 3, 4, 5 and 6 were found to be high active catalysts for ring-opening polymerization of ε-caprolactone (CL).     

The preparation, properties and X-ray structures of gold(I) trithiophosphite complexes

The first gold(I) trithiophosphite complexes were synthesised and fully characterised. Reaction of (tht)AuX (X = Cl, C₆F₅; tht = tetrahydrothiophene) with trithiophosphites (RS)₃P (R = Me, Ph) and the bicyclic [(SCH₂CH₂S)PSCH₂]₂ (²L) afforded the corresponding molecular complexes (RS)₃PAuX [R = Me, X = Cl (1); R = Me, X = C₆F₅ (2); R = Ph, X = Cl (3); R = Ph, X = C₆F₅ (4)], and ²L(AuX)₂ [X = Cl (5), X = C₆F₅ (6)]. Reacting (tht)AuCl consecutively with two mole equivalents of (MeS)₃P and then AgOTf, gave the ionic compound {[(MeS)₃P]₂Au}OTf (7). The compounds were characterised by multinuclear NMR spectroscopy, IR measurements and mass spectrometry, and the crystal and molecular structures of 1, 3, 6, two polymorphs of 2 as well as the known (MeO)₃PAuCl (8) were determined by X-ray diffraction. The halide complexes 1 and 8 are isostructural and exhibit infinite chains of “crossed-sword”-type aurophilic interactions with Au?Au contact distances of 3.2942(3) and 3.1635(4) Å, respectively. Complex 6 exhibits a long Au?Au contact of 3.4671(9) Å. Au?S interactions between 3.3455(7) and 3.520(2) Å are present in the structures of 1 and one polymorph of 2.     

Arenechromiumtricarbonyl complexes of silyl(germyl)(stannyl)- and silyl(germyl)(plumbyl)methanes including the unexpected formation of arenechromiumtricarbonyldimethylsilanol, (η-C6H5)Cr(CO)3SiMe2OH

Treatment of PhMe₂SiCH₂GeMe₃ (1) with t-BuLi followed by addition of Me₃ECl, E = Sn, Pb, results in the formation of phenylsilyl(germyl)stannyl- and phenylsilyl(germyl)plumbyl-methanes, PhMe₂Si(Me₃Ge)(EMe₃)CH, E = Sn (2), Pb (3). The thermal reaction of 1, 2 and 3 with Cr(CO)₆ yields the corresponding aryl-Cr(CO)₃ analogs, {(η⁶-C₆H₅)Cr(CO)₃}Me₂Si(Me₃Ge)CH₂ (4) and {(η⁶-C₆H₅)Cr(CO)₃}Me₂Si(Me₃Ge)(EMe₃)CH, E = Sn (5), Pb (6). The thermal treatment of 2 with Cr(CO)₆ in a wet THF/di-n-butyl ether mixture results in the formation of the arenechromiumtricarbonyl silanol {(η⁶-C₆H₅)Cr(CO)₃}Me₂SiOH (7) which exhibits amphiphilic character, forming H-bonded chains in the solid state in a head-to-head arrangement of the areneCr(CO)₃ units.     

Syntheses of new Mo(II) and W(II) mono(hydrosulfido) complexes and their conversion into di- and tetranuclear sulfido-bridged heterobimetallic complexes

Treatment of [Cp′MH(CO)₃] (M = Mo, W; Cp′ = η⁵-C₅H₅ (Cp), η⁵-C₅Me₅ (Cp*)) with 1/8 equiv of S₈ in THF, followed by the reaction with dppe under UV irradiation, gave new mono(hydrosulfido) complexes [Cp′M(SH)(CO)(dppe)] (Cp′ = Cp: M = Mo (5), W (6); Cp′ = Cp*: M = Mo (7), W (8); dppe = Ph₂PCH₂CH₂PPh₂). When 5 and 6 dissolved in THF were allowed to react with [RhCl(PPh₃)₃] in the presence of base, heterodinuclear complexes with bridging S and dppe ligands [CpM(CO)(μ-S)(μ-dppe)Rh(PPh₃)] (M = Mo (9), W(10)) were obtained. Semi-bridging feature of the CO ligands were also demonstrated. Upon standing in CH₂Cl₂ solutions, 9 and 10 were converted further to the dimerization products [(CpM)₂{Rh(dppe)}₂(μ₂-CO)₂(μ₃-S)₂] (M = Mo (13), W). Detailed structures of mononuclear 7 and 8, dinuclear 9 and tetranuclear 13 have been determined by the X-ray diffraction.     

Organoselenium(II) and selenium(IV) compounds containing 2-(Me2NCH2)C6H4 moieties: solution behavior and solid state structure

The cleavage of the Se-Se bond in [2-(Me₂NCH₂)C₆H₄]₂Se₂ (1) was achieved by treatment with SO₂Cl₂ (1:1 molar ratio) or elemental halogens to yield [2-(Me₂NCH₂)C₆H₄]SeX [X = Cl (2), Br (3), I (4)]. Oxidation of 1 with SO₂Cl₂ (1:3 molar ratio) gave [2-(Me₂NCH₂)C₆H₄]SeCl₃ (5). [2-(Me₂NCH₂)C₆H₄]SeS(S)CNR₂ [R = Me (6), Et (7)] were prepared by reacting [2-(Me₂NCH₂)C₆H₄]SeBr with Na[S₂CNR₂] · nH₂O (R = Me, n = 2; R = Et, n = 3). The reaction of 3 with K[(SPMe₂)(SPPh₂)N] resulted in isolation of [2-(Me₂NCH₂)C₆H₄]Se-S-PMe₂N-PPh₂S (8). The compounds were characterized by solution NMR spectroscopy (¹H, ¹³C, ³¹P, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 4-8 were established by single crystal X-ray diffraction. All compounds are monomeric, with the N atom of the pendant CH₂NMe₂ arm involved in a three-center-four-electron N?Se-X (X = halogen, S) bond. This results in a T-shaped coordination geometry for the Se(II) atom in 2, 4, 6-8. In 5, the Se(IV) atom achieves a square pyramidal coordination in the mononuclear unit. Loosely connected dimers are formed through intermolecular Se?Cl interactions (3.40 Å); the overall coordination geometry being distorted octahedral. In all compounds hydrogen bonds involving halide or sulfur atoms generate supramolecular associations in crystals.     

Hexanuclear manganese(III) single-molecule magnets from derivatized salicylamidoximes

Four novel hexanuclear manganese(III) complexes based on derivatized salicylamidoximes, [Mn^III₆(μ₃-O)₂(O₂CPh)₂(Me₂N-sao)₆(EtOH)₄] (1), [Mn^III₆(μ₃-O)₂(O₂CPh)₂(Me₂N-sao)₆(ⁱPrOH)₄] (2), [Mn^III₆(μ₃-O)₂(O₂CPh)₂(Et₂N-sao)₆(EtOH)₄] (3) and [Mn^III₆(μ₃-O)₂(O₂CPh)₂(Et₂N-sao)₆(ⁱPrOH)₄] (4) (Me₂N-Hsao = dimethylsalicylamidoxime; Et₂N-Hsao = diethylsalicylamidoxime), have been prepared and characterized. Single-crystal X-ray diffraction allows one to determine that 1·2CHCl₃ and 4 crystallize in the triclinic system with space group P(–1), whereas 3 crystallizes in the monoclinic system with space group P2₁/n. dc and ac magnetic susceptibility measurements of 1-4 reveal ferromagnetic coupling between Mn(III) metal ions and single-molecule magnet behaviour. The anisotropy barriers are 56, 52, 71 and 59 K for 1, 2, 3 and 4, respectively.     

Incorporation of a tripodal ligand with a (N,O,O)-donor set into a new family of nickel and cobalt spin clusters

The reaction of Ni(OAc)₂, NiX₂ (X = Cl, Br) or CoCl₂ with the proligand 2-amino-2-methyl-1,3-propanediol (ampdH₂) affords a new family of tetranuclear complexes. The syntheses of [Ni₄(OAc)₄(ampdH)₄] (1) and [M₄X₄(ampdH)₄] (M = Ni, X = Cl, 2; M = Ni, X = Br, 3; M = Co, X = Cl, 4) are reported, together with the single crystal X-ray structures of 1, 2 and 4 and the magnetochemical characterization of 1, 3 and 4. Each member of this family of complexes displays a low symmetry structure that incorporates a {M₄O₄} core unit based on a distorted cubane. Magnetic measurements reveal ferromagnetic exchange interactions for 1, 3 and 4. These give rise to S = 4 ground state spins for the tetranuclear Ni complexes and an anisotropic effective S′ = 2 ground state for the Co complex.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Homolysis of the Ln-N bond: Synthesis, characterization and catalytic activity of organolanthanide(II) complexes with 2-pyridylmethyl and 3-pyridylmethyl-functionalized indenyl ligands

Two series of new organolanthanide(II) complexes with general formula {η⁵:η¹-[1-R-3-(2-C₅H₄NCH₂)C₉H₅]}₂Ln(II) (R = H-, Ln = Yb (3), Eu (4); R = Me₃Si-, Ln = Yb (5), Eu (6)), and {η⁵:η¹-[1-R-3-(3-C₅H₄NCH₂)C₉H₅]}₂Ln(II) (R = H-, Ln = Yb (9), Eu (10); R = Me₃Si-, Ln = Yb (11), Eu (12)) were synthesized by silylamine elimination with one-electron reductive reactions of lanthanide(III) amides [(Me₃Si)₂N]₃Ln(μ-Cl)Li(THF)₃ (Ln = Yb, Eu) with 2 equiv. 1-R-3-(2-C₅H₄NCH₂)C₉H₆ (R = H (1), Me₃Si- (2)) or 1-R-3-(3-C₅H₄NCH₂)C₉H₆ (R = H (7), Me₃Si- (8)) in good yields. All the complexes were fully characterized by elemental analyses and spectroscopic methods. Complexes 3 and 5 were additionally characterized by single-crystal X-ray diffraction study. The catalytic activities of the complexes for MMA polymerization were examined. It was found that complexes with 3-pyridylmethyl substituent on the indenyl ligands could function as single-component MMA polymerization catalysts with good activities, while the complexes with 2-pyridylmethyl substituent on the indenyl ligands cannot catalyze MMA polymerization. The temperatures and solvents effect on the MMA polymerization have also been examined.