胺烷基侧链取代三苯胺类红光聚合物的合成及性能研究

通过Suzuki偶合反应合成了一系列胺烷基侧链取代的基于三苯胺和芴的共轭聚合物聚[4-(N,N-二甲基胺丙氧基)苯-4,4′-二苯胺-9,9-二辛基芴-4,7-二噻吩-2-基-2,1,3-苯并噻二唑](PFTD), 并对其化学结构和光电性能进行了表征. 末端胺基的存在提高了此类聚合物作为发光层应用于聚合物电致发光器件的性能(采用高功函数的金属铝作为阴极时). 结构为ITO/PVK/PFTD-5(DBT摩尔分数为5%时的聚合物)/Al的器件最大电致发射峰位于647 nm, 最大外量子效率达到了1.24%.     

含苯并硒二唑聚咔唑/芴类共轭聚电解质及其前驱体的合成与性能研究

采用Suzuki偶合反应合成了一系列新型的咔唑、芴和2,1,3-苯并硒二唑的共聚物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-双(N,N-二甲基胺丙基)芴](PCzN-BSeD)及其相应的聚电解质衍生物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-(双(3′-(N,N-二甲基)-N-乙基铵)丙基)芴]二溴(PCzNBr-BSeD).在聚咔唑和芴中引入不同比例的2,1,3-苯并硒二唑(BSeD)单元,引起了由咔唑和芴链段向窄带隙苯并硒二唑(BSeD)单元有效的能量转移.通过对聚合物电致发光性能的研究,发现用聚(3,4-亚乙基二氧基噻吩)(PEDOT)或聚(3,4-亚乙基二氧基噻吩)/聚乙烯咔唑(PEDOT/PVK)作为空穴传输层时,器件的性能相差不大,表明咔唑的引入较明显的改善了聚合物的空穴注入性能.而且几乎所有的聚合物用高功函数铝作阴极的器件和用钡/铝作阴极的器件具有相近的发光性能,表明这类聚合物具有良好的电子注入性能.     

聚芴主链含D-A型萘并噻二唑和苯并硒二唑衍生物的红光高分子发光材料

设计合成了新型的含萘并噻二唑（NT）或苯并硒二唑（BS）电子受体单元的D-A型红光掺杂剂,将它们引入到聚芴(PFO)的主链,调节掺杂剂含量,合成了一系列具有“掺杂剂/主体”特性的红光高分子材料含萘并噻二唑衍生物的聚芴(PFR-xNT)和含苯并硒二唑衍生物的取芴(PFR-xBS)。 这些红光高分子的吸收光谱主要表现为聚芴主体的吸收,荧光光谱既有主体聚芴的蓝光峰,也有掺杂剂的红光峰,并且红光峰的相对强度随着掺杂剂含量的增加而增强。 与光致发光光谱不同,这些高分子的电致发光光谱主要表现为掺杂剂的红光发射,并在掺杂的摩尔分数达到1%时实现了主体聚芴向红光掺杂剂的完全能量转移。 其中PFR-10NT和PFR-10BS的单层器件(ITO/PEDOT:PSS/Polymer/Ca/Al)(PEDOT:聚3,4-乙烯二氧噻吩;PSS:聚苯乙烯磺酸)分别实现了电流效率1.61 cd/A,最大发射波长632 nm,CIE色坐标（0.63,0.35）以及电流效率1.10 cd/A,最大发射波长620 nm,CIE色坐标（0.63,0.36）的高效红光发射。     

芴-苯并噻二唑-苯胺类共聚物的合成与发光性能

用Suzuki缩聚反应分别将窄带隙单元-苯并噻二唑-二苯胺(DPABT)和苯并噻二唑-三苯胺(TPABT)引入聚芴主链,合成了共聚物PF-DPABT和PF-TPABT,并比较了共聚物的发光性能.随着窄带隙单元含量的增加,其特征发射逐渐增强,说明发生了从聚合物主体单元到窄带隙单元有效的能量转移.两种共聚物在低窄带隙单元含量(1mol%)下的电致发光光谱仅出现窄带隙单元的特征发射,PF-DPABT共聚物为650～680nm之间的饱和红光,而PF-TPABT共聚物为590～610nm之间的橙红光,聚芴主体单元的发射被完全淬灭,说明与光致发光过程相比,电致发光过程中的能量转移更完全.基于共聚物PF-DPABT-1及PF-TPABT-5器件的最大外量子效率分别为1.3%和2.0%,器件结构为ITO/PEDOT:PSS/polymer/Ba/Al,是一类有希望的红光材料.     

一种新型低带隙共轭聚合物的合成及其光学性质

在钯催化剂作用下, 通过4,7-二(5-溴-2-噻吩基)[2,1,3]苯并噻二唑与2,5-二乙炔基-3-辛基噻吩的偶联反应, 合成了一种新的共轭高分子聚4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔(PTE-DTBT). 通过紫外可见吸收光谱及荧光光谱对其光学性质进行了研究. 紫外-可见吸收谱结果表明, PTE-DTBT的固体膜光学带隙为1.71 eV; 电化学测试其带隙为1.88 eV. TiO₂/PTE-DTBT共混固体膜的荧光发射谱结果表明电子供体PTE-DTBT分子与电子受体TiO₂分子间存在有效的电子转移.     

一类近红外电致发光芴基共聚物的合成和性能研究

基于9,9-二辛基芴与窄带隙单体5,7-二(2-噻吩基)噻[3,4-b]并[1,4]二嗪(DTP),通过Suzuki偶合反应,合成了一系列无规窄带隙的芴基共聚物(PFO-DTP),并对它们的紫外-可见吸收光谱、光致发光和电致发光性能进行了初步研究.共聚物在380 nm和632 nm处有两个明显的吸收峰,其中632 nm处的吸收随着共聚物中窄带隙单体(DTP)含量的增加而加强,最大电致发光峰随着共聚物中窄带隙单体(DTP)含量的增加,从752nm红移到了781 nm.同时与其同分异构体4,7-二(2-噻吩基)苯并噻二唑(DBT)与芴的共聚物PFO-DBT相比,该类聚合物的吸收红移,与近地太阳光谱更为匹配.     

苯并噻二唑与苯胺类聚合物的金属镍配合物催化法合成与表征

以1,3-二(二苯基膦)丙烷二氯化镍(Ⅱ)[Ni(dppp)Cl2]作催化剂,通过4,7-二溴-2,1,3-苯并噻二唑格氏(Grignard)试剂分别与3,3′-二甲基联苯二胺、对苯二胺共聚得到了两种新型主链含刚性和柔性链结构的苯并噻二唑类共轭聚合物。通过FT-IR、1H-NMR、UV-Vis、XRD、TGA等测试手段对聚合物的化学结构和性能进行了表征。结果表明:聚合物的紫外-可见最大吸收波长分别在306 nm和380 nm处出现,荧光激发峰分别出现在378 nm和463 nm,相应的荧光发射峰分别在493、562 nm处出现。共轭聚合物具有一定的结晶性和热稳定性。     

绿色单峰发光聚(9,9-二烯丙基芴)的合成及其发光机制

为了得到绿色单峰发光的聚合物材料, 我们设计并合成了9位取代的二烯丙基芴单体, 在NiCl₂的催化下, 合成了可溶的聚芴衍生物, 聚(9,9-二烯丙基芴)(PAF). 较短的烯丙基链既可以增加聚芴的溶解度, 双键的存在又有利于聚芴发生分子间聚集而得到绿光发射的有机电致发光器件(OLED). PAF在溶液和薄膜状态下的荧光峰分别位于403和456 nm的蓝光区域, 而其器件ITO/PEDOT:PSS/PAF/LiF/Al(其中, ITO为氧化铟锡, PEDOT为聚(3,4-乙撑二氧噻吩), PSS为聚苯乙烯磺酸盐)的电致发光峰却红移至绿光区域(532 nm), 得到绿色单峰发光. 紫外吸收光谱、荧光发射光谱、红外光谱以及原子力显微镜(AFM)图像的结果证明, 造成PAF电致发绿光的机制为聚合物分子间聚集.     

4,7-非对称二取代苯并噻二唑的合成

以邻甲苯胺为起始原料,经3步反应制得4-甲基-2,1,3-苯并噻二唑(1);1经溴代、水解和IBX选择性氧化制得系列4,7-非对称二取代苯并噻二唑砌块;通过砌块4-甲酰基-7-溴-2,1,3-苯并噻二唑与给电子基团的缩合或偶联反应,合成了具有4,7-非对称苯并噻二唑D-π-A型分子结构的新化合物4-甲酰基-7-N,N-二甲氨基-2,1,3-苯并噻二唑和4-甲酰基-7-[4-(N,N-二甲氨基)]苯基-2,1,3-苯并噻二唑,其结构经NMR和HR-MS表征.     

用基于苯并噻二唑衍生物的比率荧光化学传感器检测氟离子

研制了一种用于灵敏、快速地检测溶液中的氟离子的基于苯并噻二唑衍生物的荧光传感器.4,7-二溴-2,1,3-苯并噻二唑与三甲基硅基乙炔通过Sonogashira偶联反应得到二取代的三甲基硅基乙炔苯并噻二唑;将该化合物用于检测氟离子,分析了检测灵敏度和选择性.结果表明,在乙腈和水(V/V=9∶1)混合溶液中,合成的苯并噻二唑衍生物的最大发射波长峰值为455nm(激发波长为376nm);就所测试的F-,Cl-,Br-,I-,ClO4-,AcO-,NO3-,H2PO3-,CN-和HSO4-等阴离子而言,仅F-可以脱除三甲基硅保护基使得该化合物荧光最大发射波长蓝移至435nm,荧光强度降低60%,且最低检测限可达4.5×10-8 mol/L.因此,二取代的三甲基硅基乙炔苯并噻二唑应用于氟离子检测具有很好的灵敏度和选择性.     

芴与噻吩发光共聚物的合成及其电致发光性能

采用Suzuki偶合方法合成出了一系列新型的 9,9 二辛基芴 (DOF)和噻吩 (Th)的共聚物 .其中 ,DOF与Th的投料比 (摩尔比 )分别为 95∶5 (PTF5 )、90∶1 0 (PTF1 0 )、85∶1 5 (PTF1 5 )、70∶3 0 (PTF3 0 )、5 0∶5 0 (PTF5 0 ) .所有的聚合物均可溶于常用的有机溶剂 ,如THF,CHCl3等 ,其分子量在 60 0 0～ 5 3 0 0 0之间 .当在聚芴主链中引入噻吩后 ,其发光波长发生了红移 ,最大发光波长由PTF5时的 490nm红移到PTF5 0时的 5 41nm .随着聚芴主链中噻吩含量的增加 ,最大电致发光和光致发光效率都逐渐降低 由这些聚合物所制得的器件 ,最大电致发光效率为PTF5和PTF1 0的 0 45 %.由此表明 ,在聚芴主链中引入少量的低带隙单体噻吩可以调节聚芴的发光颜色及发光效率     

Synthesis and photovoltaic properties of fluorene-based copolymers with narrow band-gap units on the side chain

A series of novel polyfluorene copolymers are developed by covalently attaching narrow band gap aryl-heterocycle units of Th-BT-TPA to the side chain of polyfluorene with an alkyl phenyl spacer through Pd-catalyzed Suzuki coupling reactions. The resulting copolymers are soluble in common organic solvents. The electrochemical, optical, and photovoltaic properties of the copolymers are studied. Electrochemical and optical analysis reveal that these polymers exhibit relatively low band gaps from 1.95 to 2.00 eV and exhibit strong absorption in the 300-620 nm region. BHJ solar cells blending copolymers PF-MR15-DBT35 with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) (1:1 weight ratio) as the active layer present a high open-circuit voltage (V_oc∼1.0 V) and a power conversion efficiency of 0.7% under simulated solar light AM1.5G (80 mW/cm²). Further investigations of other polyfluorene copolymers with narrow band gap aryl-heterocycle units on the side chain are in progress.     

Polyfluorenes minimally doped with 1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene chromophore: Their synthesis,characterization, and application to white‐light‐emitting materials

Copolyfluorenes ( PFR1 and PFR2 ), chemically doped with 0.1 and 0.025 mol % 2,5‐dihexyloxy‐1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene (MR chromophere) were synthesized by the Suzuki coupling reaction. The PFR s were used to fabricate white‐light‐emitting devices through incomplete energy transfer. Because of the low content of the MR chromophore, the optical, thermal, and electrochemical properties of the PFR s were almost identical to those of polyfluorene, except for their photoluminescent (PL) and electroluminescent (EL) properties. The copolymer films showed PL peaks at about 428 and 570 nm originating from fluorene segments and MR chromophores, respectively. Compared with the model compound ( MR ), the polymer chains extended the conjugation length of the MR chromophores and exhibited a 20–48 nm red‐shift in the emission band. In addition, the lower LUMO level of the MR (?3.27 eV) was expected to improve the electron injection. The EL devices [ITO/PEDOT:PSS/ PFR s/Ca (50 nm)/Al (100 nm)] showed a broad emission band, covering the entire visible region, with chromaticity coordinates of (0.36, 0.35) and (0.32, 0.30) for PFR1 and PFR2 devices, respectively. The emission color of the PFR2 device was very similar to that of a pure white light (0.33, 0.33); and the maximal brightness and current efficiency were 3011 cd/m² and 1.98 cd/A, respectively, which surpass those found for polyfluorene devices (1005 cd/m², 0.28 cd/A). A). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3703–3713, 2008     

Synthesis,characterization, and application of light‐emitting copolyfluorenes slightly doped with distyrylbenzene derivatives

Copolyfluorenes PFG1～PFG4 slightly doped with 0.006–0.5 mol % of 2,5‐dihexyloxy‐1,4‐bis(2‐phenyl‐2‐cyanovinyl)benzene (green chromophore) were synthesized by the Suzuki coupling reaction to be evaluated as hosts for white‐light electroluminescent (EL) devices. Their optical, thermal and electrochemical properties were almost identical to those of polyfluorene ( PF ) due to minimal chromophore content. However, the electroluminescent (EL) spectra of the PFGn were very different from photoluminescence spectra in film state. Relative intensity of green emission (ca. 521 nm) in EL spectra are much stronger than those in PL spectra, which can be attributed to charges trapping in the chromophores due to its narrow band gap (E_g ≈ 2.56 eV). The performance of EL devices [ITO/PEDOT:PSS/polymer/Ca (50 nm)/Al (100 nm)] were improved with an increase in chromophore content. The PFG4 device revealed the best performance (6790 cd/m², 1.69 cd/A), and the PFG1 and PFG2 devices exhibited comparable intensity in blue and green emissions. Blend EL devices were fabricated by using the PFGn as the hosts and a red iridium complex [Ir(piq)₂(acac)] as dopant. By controlling the amount of the iridium complex, the white‐light emitting device was achieved with PFG2 , with maximum brightness and CIE coordinate being 4120 cd/m² and (0.31, 0.28), respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 149–160, 2009     

新型含silole聚咔唑的合成及其高效率红色发光二极管研究

合成了一种3,4-位为三苯胺的新型silole单体(TST)及其与N-己基-3,6-咔唑(Cz)组成的共聚物PCz-TST,其中TST的含量变化为1%~20%.PCz-TST的重均分子量介于9000~10600之间,而多分散系数在1.3~1.5之间.研究了共聚物的吸收光谱、电化学性质、光致发光光谱、以及电致发光性能.PCz-TST的主吸收峰位于305 nm,归属于咔唑链段的贡献,而TST单元的吸收出现在498 nm.4种PCz-TST的光学带隙在2.06~2.18eV之间,其光致发光光谱具有明显的能量转移特征,固态薄膜能发出单一的橙光,而电致发光峰位进一步红移,在604~645 nm之间.PCz-TST的HOMO能级在-4.99~-5.12 eV之间,与典型的空穴阻挡层TPBI能形成大于1.0 eV的空穴势垒.在器件结构为ITO/PEDOT/PCz-TST/TPBI/Ba/Al的聚合物发光二极管中,TPBI层能限制激子复合区域并提高复合效率,表现了来自silole单元的高效率电致红光,其中5%TST含量的共聚物获得了1.94%的最大外量子效率.TPBI的引入还导致了电致发光光谱的红移,从而改善了红光的色纯度.     

Stable,Wavelength‐Tunable Fluorescent Dyes in the NIR‐II Region for In Vivo High‐Contrast Bioimaging and Multiplexed Biosensing

Small‐molecule organic fluorophores, spectrally active in the 900–1700 nm region, with tunable wavelength and sensing properties are sought‐after for in vivo optical imaging and biosensing. A panel of fluorescent dyes ( CX ) has been developed to meet this challenge. CX dyes exhibit the wavelength tunability of cyanine dyes and have a rigidified polymethine chain to guarantee their stability. They are chemo‐ and photo‐stable in an aqueous environment and have tunable optical properties with maximal absorbing/emitting wavelength at 1089/1140 nm. They show great potential in high‐contrast in vivo bioimaging and multicolor detection with negligible optical cross talk. Förster resonance energy transfer (FRET) between CX dyes was demonstrated in deep tissue, providing an approach for monitoring drug‐induced hepatotoxicity by detection of OONO^?. This report presents a series of NIR‐II dyes with promising spectroscopic properties for high‐contrast bioimaging and multiplexed biosensing.     

Stable,Wavelength‐Tunable Fluorescent Dyes in the NIR‐II Region for In Vivo High‐Contrast Bioimaging and Multiplexed Biosensing

Small‐molecule organic fluorophores, spectrally active in the 900–1700 nm region, with tunable wavelength and sensing properties are sought‐after for in vivo optical imaging and biosensing. A panel of fluorescent dyes ( CX ) has been developed to meet this challenge. CX dyes exhibit the wavelength tunability of cyanine dyes and have a rigidified polymethine chain to guarantee their stability. They are chemo‐ and photo‐stable in an aqueous environment and have tunable optical properties with maximal absorbing/emitting wavelength at 1089/1140 nm. They show great potential in high‐contrast in vivo bioimaging and multicolor detection with negligible optical cross talk. Förster resonance energy transfer (FRET) between CX dyes was demonstrated in deep tissue, providing an approach for monitoring drug‐induced hepatotoxicity by detection of OONO^?. This report presents a series of NIR‐II dyes with promising spectroscopic properties for high‐contrast bioimaging and multiplexed biosensing.     

Synthesis and photophysical characteristics of 2,7-fluorenevinylene-based trimers and their electroluminescence

Three new 2,7-fluorenevinylene-based trimers were synthesized and characterized. The synthesis was carried out by the Heck coupling reaction of 9,9-dihexyl-2,7-divinylfluorene with 2-(4-bromophenyl)-5-phenyl-1,3,4-oxadiazole, N,N-diphenyl-4-bromoaniline, or 3-bromopyrene to afford the trimers OXD, TPA, and PYR, respectively. All the trimers were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. Their glass transition temperatures ranged from 33 to 60 degrees C. The UV-vis spectra showed an absorption maximum at lambda(a,max) = 379-417 nm with optical band gap of Eg = 2.47-2.66 eV. In solution, they emitted strong blue-green photoluminescence (PL) with PL maximum at lambda(f,max) = 455-565 nm and fluorescence quantum yield of Phi(f) = 0.65-0.74. On the other hand, in their spin-coated films, the PL efficiencies significantly decreased due to the presence of concentration quenching. All samples showed nanosecond transient lifetime containing two components, suggesting excimer formation. The organic light-emitting diodes (OLEDs) with OXD and TPA showed green emission with electroluminescence (EL) quantum efficiencies of eta(EL) approximately 10(-2)%, while very weak EL efficiency of eta(EL) approximately 10(-5)% was observed with PYR. The highest occupied molecular orbital (HOMO) levels of the films were found to be 5.05-5.75 eV.     

Synthesis,characterization, and optoelectronic properties of hyperbranched polyfluorenes containing pendant benzylether dendrons

Linear polyfluorenes with low generation of side benzylether dendrons ( PLG0 , PLG1 ) and hyperbranched polyfluorenes with 1,3,5‐benzene branch unit ( PHG0 and PHG1 ) were prepared by the Suzuki coupling reaction to investigate the structural effect on optoelectronic properties. Their optical properties, both in solution and film state, were investigated using absorption and photoluminescence (PL) spectra. The excimer emission of polyfluorene at about 530 nm, induced by thermal annealing, was completely suppressed by the hyperbranched structure, but the suppression was not obvious by the side benzylether dendrons. The optoelectronic performance of the EL devices (ITO/PEDOT:PSS/polymer/Ca/Al) was strongly dependent upon chemical structures of the emitting polyfluorenes. The hyperbranched PHG0 with zero generation of benzylether side groups revealed the best device performance, with maximal luminance and maximal luminance efficiency of 2350 cd/m² and 0.33 cd/A, respectively. The results suggest that incorporation of branch units with low generation of benzylether dendrons is an effective way to improve annealing stability and EL performance of the polyfluorenes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5945–5958, 2008     

Narrow band gap D–A copolymer of indacenodithiophene and diketopyrrolopyrrole with deep HOMO level: Synthesis and application in field‐effect transistors and polymer solar cells

A novel fused ladder alternating D–A copolymer, PIDT–DPP, with alkyl substituted indacenodithiophene (IDT) as donor unit and diketopyrrolopyrrole (DPP) as acceptor unit, was designed and synthesized by Pd‐catalyzed Stille‐coupling method. The copolymer showed good solubility and film‐forming ability combining with good thermal stability. PIDT–DPP exhibited a broad absorption band from 350 to 900 nm with an absorption peak centered at 735 nm. The optical band gap determined from the onset of absorption of the polymer film was 1.37 eV. The highest occupied molecular orbital level of the polymer is as deep as ?5.32 eV. The solution‐processed organic field‐effect transistor (OFETs) was fabricated with bottom gate/top contact geometry. The highest FET hole mobility of PIDT–DPP reached 0.065 cm² V^?1 s^?1 with an on/off ratio of 4.6 × 10⁵. This mobility is one of the highest values for narrow band gap conjugated polymers. The power conversion efficiency of the polymer solar cell based on the polymer as donor was 1.76% with a high open circuit voltage of 0.88 V. To the best of our knowledge, this is the first report on the photovoltaic properties of alkyl substituted IDT‐based polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012