氮掺杂石墨烯-Nafion纳米材料修饰电极测定硝基苯类化合物

以Nafion为溶剂分散氮掺杂石墨烯,利用氮掺杂石墨烯良好的电化学性能及Nafion的富集和选择性透过特征制备了用于快速检测硝基苯类化合物的修饰电极NG-Nafion/GCE。采用原子力显微镜对氮掺杂石墨烯-Nafion修饰电极的形貌进行了表征,利用循环伏安法和方波伏安法表征了修饰电极的电化学特征,建立了此修饰电极方波伏安法检测硝基苯的方法。在最佳实验条件下,方波伏安的峰电流强度与硝基苯的浓度在3~12μmol/L和50~500μmol/L范围内成线性相关,检出限为0.5μmol/L。以此方法对湖水水样和自来水水样中的硝基苯进行加标回收检测,回收率在95.4%~103.5%之间。     

TiO2-石墨烯-Nafion复合膜修饰玻碳电极同时测定多巴胺和尿酸

利用在玻碳电极上修饰了TiO2-石墨烯-Nafion复合膜制得的修饰电极进行多巴胺(DA)和尿酸(UA)的同时测定。用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了该修饰电极的电化学行为。在pH为7.0的磷酸盐缓冲液(PBS)中,修饰电极对于DA和UA的电化学氧化具有良好的电催化性能。DA和UA的氧化峰电流分别在2～120和60～300μmol/L浓度范围内呈良好的线性关系,检出限分别为0.066和0.102μmol/L。实验结果表明,TiO2-石墨烯-Nafion复合膜修饰电极显著提高了检测的灵敏度,并表现出良好的选择性和重现性。     

电沉积Cu_2O在无酶葡萄糖传感器中的应用

采用电化学沉积法在玻碳电极表面制备了Cu_2O,利用X射线衍射(XRD)和扫描电镜(SEM)对Cu_2O的微观结构和表面形貌进行了表征,通过循环伏安法和计时电流法研究了Cu_2O对葡萄糖的电催化氧化性能。结果表明:该修饰电极对葡萄糖有良好催化作用,葡萄糖检测的线性范围为5.0μmol/L~6.23mmol/L,检测限(S/N=3)为0.4μmol/L。该传感器制备简单,稳定性和重复性好,可用于实际样品的测定。     

纳米NiO-还原石墨烯复合修饰玻碳电极的制备及电催化检测多巴胺

制备了纳米NiO-还原石墨烯复合修饰电极(NiO-rGO/GCE),并用于多巴胺(DA)的检测。用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了DA在该修饰电极上的电化学行为。结果表明,在pH=7.0的磷酸盐缓冲溶液(PBS)中,该修饰电极对DA有良好的催化作用。DA浓度在5.0×10-7~3.2×10-5 mol/L范围内与氧化峰电流呈良好的线性关系,检出限为3.8×10-8 mol/L。用该修饰电极直接测定了血清中DA含量,回收率在97.8%~101.1%之间。     

基于MnO_2纳米线-还原石墨烯复合修饰电极的多巴胺电化学检测

通过电化学还原法制备MnO_2纳米线/还原石墨烯复合修饰电极(MnO_2-RGO/GCE),用于多巴胺(DA)的检测。采用扫描电镜和X-射线粉末衍射对不同的修饰电极微观形貌进行了表征,优化了电化学还原条件和测定DA实验条件。此外,还研究DA在裸电极及RGO或MnO_2-RGO修饰电极上的循环伏安响应。MnO_2-RGO/GCE复合修饰电极实现AA、DA和UA氧化峰的有效分离,AA-DA和DA-UA的氧化峰电位差分别为268和128 m V。检测DA的线性范围为0.06~1.0μmol/L和1.0~80μmol/L,检出限为1.0 nmol/L(S/N=3)。制备的MnO_2-RGO/GCE成功用于人血清样品的多巴胺含量分析。     

基于多壁碳纳米管-氧化钨纳米复合材料的多巴胺电化学传感器

通过电化学沉积法制备多壁碳纳米管-氧化钨(MWCNTs-WOx)纳米复合材料,利用场发射扫描电子显微镜(SEM)和X射线光电子能谱分析仪(XPS)对其形貌和组成进行表征。制备了复合材料修饰的玻碳电极,采用电化学阻抗(EIS)技术对修饰电极进行表征。采用循环伏安(CV)法研究了多巴胺(DA)在修饰电极上的电化学行为,以差分脉冲伏安(DPV)法建立DA检测方法。结果表明,在p H=6.5磷酸盐缓冲液(PBS)中,MWCNTs-WOx纳米复合材料对多巴胺有明显的电催化作用。在优化的条件下,氧化峰电流与DA浓度在0.05~1.00 mmol/L范围内呈良好的线性关系,检出限为17μmol/L(S/N=3)。此电化学传感器具有良好的重现性、选择性及较强的抗干扰能力,尿酸(UA)不影响DA的定量检测。将此方法用于盐酸多巴胺注射液的含量检测,效果良好。     

氮掺杂石墨烯与发夹DNA修饰的电极为工作电极-差分脉冲伏安法用于测定多巴胺

将玻碳电极(GCE)打磨至呈镜面,在其表面上滴加氮掺杂石墨烯悬浮液5.0μL,在50℃的红外灯下烘干,制得氮掺杂石墨烯修饰的GCE;然后取5.0μmol·L-1发夹DNA(H DNA)溶液10μL滴涂于氮掺杂石墨烯修饰电极表面,制得氮掺杂石墨烯和H DNA修饰的GCE。用此修饰电极作为工作电极,用差分脉冲伏安法(DPV)测定人体血清中多巴胺(DA)的含量。试验表明:氮掺杂石墨烯和H DNA修饰的电极对DA的电化学氧化具有更好的电催化作用。DA在此修饰电极上的氧化峰电流与其浓度在4.0×10-7～6.0×10-5 mol·L-1内呈线性关系,检出限(3s/k)为6.6×10-8 mol·L-1。测定时用pH 6.5磷酸盐缓冲溶液(PBS)作为支持电解质。分析血清样品时前处理如下:取血清样品2.0mL,加入甲醇4.0mL,离心沉淀。取上清液2.0mL,加入等体积的pH 6.5PBS,充分混匀后供测定。用pH 6.5的PBS配制DA标准溶液系列,利用DPV对DA标准溶液系列进行测定,记录其氧化峰电流值,制作工作曲线。应用此方法分析了人体血清样品并以此样品为基体进行加标回收试验,测得回收率在90.0%～110%之间,测定值的相对标准偏差(n=5)在1.7%～3.7%之间。     

三维有序石墨烯掺杂纳米二氧化钛酶生物传感器

采用模板法在氧化铟锡电极上制备了三维有序多孔结构的石墨烯掺杂纳米二氧化钛修饰电极,并在此修饰电极上成功固定了过氧化氢酶,从而构建了一种新型的H2O2生物传感器。通过循环伏安、交流阻抗及计时电流等方法研究了该修饰电极的电化学特性,实验结果表明,该修饰电极对H2O2有良好的电催化作用,对H2O2的检测线性范围为3.0×10-6～3.6×10-3mol/L,检测限为4.2×10-7mol/L(S/N=3);且传感器响应迅速、灵敏度高、重现性和稳定性好。     

聚对氨基苯磺酸/氧化石墨烯修饰电极同时测定多巴胺和抗坏血酸

用循环伏安法制备了聚对氨基苯磺酸/氧化石墨烯修饰玻碳电极(PABSA/GO/GCE),研究了多巴胺(DA)和抗坏血酸(AA)在该修饰电极上的电化学行为,并建立了同时测定多巴胺和抗坏血酸电化学分析新方法,相对于裸玻碳电极,该电极测定DA和AA的峰电流明显增加。实验结果表明:在实验条件下,DA测定的线性范围为0.50～300μmol/L;检出限为5.0μmol/L。AA测定的线性范围是0.10～2.4 mmol/L,检出限为0.50μmol/L。     

RuO_2/MWNTs纳米复合材料用于无酶型葡萄糖传感器的研究

采用水热合成法在多壁碳纳米管(MWNTs)上负载了Ru O2纳米颗粒,并以Nafion为固定剂将复合材料修饰于玻碳电极的表面,制备了一种新型无酶型葡萄糖传感器。利用扫描电镜(SEM)、X射线衍射(XRD)、电化学方法对复合材料进行表征,发现碳纳米管上的Ru O2为纳米级,分散均匀。该复合材料修饰的电极对葡萄糖响应电流明显,并且受抗坏血酸(AA)、多巴胺(DA)和尿酸(UA)的干扰小。采用安培法测定葡萄糖,其线性范围为1.0×10-5~1.2×10-2 mol/L(R2=0.998),灵敏度41.826μA cm-2(mmol/L)-1,检测限2.2×10-5 mol/L(信噪比为3),响应时间5.2 s,具有较好的稳定性。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.