Acceleration of osteogenic differentiation by sustained release of BMP2 in PLLA/graphene oxide nanofibrous scaffold

After about three decades of experience, tissue engineering has become one of the most important approaches in reconstructive medical research to treat non‐self‐healing bone injuries and lesions. Herein, nanofibrous composite scaffolds fabricated by electrospinning, which containing of poly(L‐lactic acid) (PLLA), graphene oxide (GO), and bone morphogenetic protein 2 (BMP2) for bone tissue engineering applications. After structural evaluations, adipose tissue derived mesenchymal stem cells (AT‐MSCs) were applied to monitor scaffold's biological behavior and osteoinductivity properties. All fabricated scaffolds had nanofibrous structure with interconnected pores, bead free, and well mechanical properties. But the best biological behavior including cell attachment, protein adsorption, and support cells proliferation was detected by PLLA‐GO‐BMP2 nanofibrous scaffold compared to the PLLA and PLLA‐GO. Moreover, detected ALP activity, calcium content and expression level of bone‐related gene markers in AT‐MSCs grown on PLLA‐GO‐BMP2 nanofibrous scaffold was also significantly promoted in compression with the cells grown on other scaffolds. In fact, the simultaneous presence of two factors, GO and BMP2, in the PLLA nanofibrous scaffold structure has a synergistic effect and therefore has a promising potential for tissue engineering applications in the repair of bone lesions.     

Poly(l‐Lactic Acid)/Gelatin Fibrous Scaffold Loaded with Simvastatin/Beta‐Cyclodextrin‐Modified Hydroxyapatite Inclusion Complex for Bone Tissue Regeneration

Recently, the application of nanostructured materials in the field of tissue engineering has garnered attention to mediate treatment and regeneration of bone defects. In this study, poly(l ‐lactic acid) (PLLA)/gelatin (PG) fibrous scaffolds are fabricated and β‐cyclodextrin (βCD) grafted nano‐hydroxyapatite (HAp) is coated onto the fibrous scaffold surface via an interaction between βCD and adamantane. Simvastatin (SIM), which is known to promote osteoblast viability and differentiation, is loaded into the remaining βCD. The specimen morphologies are characterized by scanning electron microscopy. The release profile of SIM from the drug loaded scaffold is also evaluated. In vitro proliferation and osteogenic differentiation of human adipose derived stem cells on SIM/HAp coated PG composite scaffolds is characterized by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red S staining), and real time Polymerase chain reaction (PCR). The scaffolds are then implanted into rabbit calvarial defects and analyzed by microcomputed tomography for bone formation after four and eight weeks. These results demonstrate that SIM loaded PLLA/gelatin/HAp‐(βCD) scaffolds promote significantly higher ALP activity, mineralization, osteogenic gene expression, and bone regeneration than control scaffolds. This suggests the potential application of this material toward bone tissue engineering.

     

Preparation of HMWCNT/PLLA nanocomposite scaffolds for application in nerve tissue engineering and evaluation of their physical,mechanical and cellular activity properties

This study was aimed to prepare biodegradable and porous nanocomposite scaffolds with microtubular orientation structure as a model for nerve tissue engineering by thermally induced phase separation (TIPS) method using dioxane as the solvent, crystalline poly (L‐lactic acid) (PLLA) and multi‐walled carbon nanotubes (MWCNTs). In order to overcome dispersion of MWCNTs in the PLLA matrix, heparinization of MWCNTs was performed. Solvent crystallization, oriented structure, the mean pore diameter and porosity percentage of the scaffolds were controlled by fundamental system parameters including temperature‐gradient of the system, polymer solution concentration and carbon nanotube content. Scanning Electron Microscopy (SEM), ImageJ, software and dynamic mechanical thermal analysis (DMTA) were used to investigate the structural and mechanical properties. TEM observation was carried out for characterization of nanotube dispersion in PLLA. It was found that the scaffolds containing heparinized multi‐walled carbon nanotubes (HMWCNTs) exhibited higher storage modulus, better carbon nanotube (CNT) dispersion and tubular orientation structure than those with non heparinized MWCNTs. In‐vitro studies were also conducted by using murine P₁₉ cell line as a suitable model system to analyze neuronal differentiation over a 2‐week period. Immunofluorescence and DAPI staining were used to confirm the cells' attachment and differentiation on the PLLA/HMWCNT nanocomposite scaffolds. Based on the results, we can conclude that the PLLA/HMWCNT scaffolds enhanced the nerve cell differentiation and proliferation, and therefore, acted as a positive cue to support neurite outgrowth. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved efficacy of bio‐mineralization of human mesenchymal stem cells on modified PLLA nanofibers coated with bioactive materials via enhanced expression of integrin α2β1

Current therapeutic interventions in bone defects are mainly focused on finding the best bioactive materials for inducing bone regeneration via activating the related intracellular signaling pathways. Integrins are trans‐membrane receptors that facilitate cell‐extracellular matrix (ECM) interactions and activate signal transduction. To develop a suitable platform for supporting human bone marrow mesenchymal stem cells (hBM‐MSCs) differentiation into bone tissue, electrospun poly L‐lactide (PLLA) nanofiber scaffolds were coated with nano‐hydroxyapatite (PLLA/nHa group), gelatin nanoparticles (PLLA/Gel group), and nHa/Gel nanoparticles (PLLA/nHa/Gel group) and their impacts on cell proliferation, expression of osteoblastic biomarkers, and bone differentiation were examined and compared. MTT data showed that proliferation of hBM‐MSCs on PLLA/nHa/Gel scaffolds was significantly higher than other groups (P < .05). Alkaline phosphatase activity was also more increased in hBM‐MSCs cultured under osteogenic media on PLLA/nHa/Gel scaffolds compared to others. Gene expression evaluation confirmed up‐regulation of integrin α2β1 as well as the osteogenic genes BGLAP, COL1A1, and RUNX2. Following use of integrin α2β1 blocker antibody, the protein level of integrin α2β1 in cells seeded on PLLA/nHa/Gel scaffolds was decreased compared to control, which confirmed that most of the integrin receptors were bound to gelatin molecules on scaffolds and could activate the integrin α2β1/ERK axis. Collectively, PLLA/nHa/Gel scaffold is a suitable platform for hBM‐MSCs adhesion, proliferation, and osteogenic differentiation in less time via activating integrin α2β1/ERK axis, and thus it might be applicable in bone tissue engineering.     

An injectable chitosan-based hydrogel reinforced by oxidized nanocrystalline cellulose and mineral trioxide aggregate designed for tooth engineering applications

The complex anatomy of teeth limits the accessibility and efficacy of regenerative treatments. Therefore, the application of well-known inducers as injectable hydrogels for the regeneration of the dentin-pulp complex is considered a promising approach. In this regard, this study aimed to develop an injectable hydrogel containing mineral trioxide aggregate (MTA). The injectable chitosan/oxidized-nanocrystalline cellulose/MTA (CS/OCNC/MTA) hydrogels were prepared, and the physicochemical properties of these hydrogels were evaluated by TGA, FTIR, Rheological analysis, and SEM. Moreover, the effect of MTA on the swelling and degradability of scaffolds was assessed. The proliferative effects of synthesized hydrogels were also determined on human dental pulp stem cells (hDPSCs) by MTT assay. For induction of differentiation and biomineralization in these cells, the alkaline phosphatase activity and Alizarin Red S staining tests were performed in the presence of fabricated scaffolds. The proliferation of hDPSCs was significantly increased in the presence of these hydrogels. Moreover, the addition of MTA to hydrogel structure dramatically improved the differentiation of hDPSCs. These results suggested that this novel injectable hydrogel provides appropriate physiochemical properties and can be considered a promising scaffold for regenerative endodontic procedures.

Graphical abstract

     

Dual Therapy Coating on Micro/Nanoscale Porous Polyetheretherketone to Eradicate Biofilms and Accelerate Bone Tissue Repair

Defective osteogenesis and latent infections continue to be two major issues in the therapy of bone tissue regeneration. In this study, a unique hierarchically micro/nanoscale‐architecture is first proposed and produced on polyetheretherketone (PEEK). Besides, a “simvastatin‐PLLA film‐tobramycin microspheres” delivery system is subsequently fabricated to endow the PEEK implant with osteogenic and antibacterial capabilities. In vitro antibacterial evaluations confirm that the decorated PEEK scaffolds possess excellent resistance against planktonic/adherent bacteria. In vitro cell attachment/proliferation, lactate dehydrogenase (LDH) content, alkaline phosphatase (ALP) activity, calcium mineral deposition experiments, and real‐time PCR analysis all exhibit that the superior proliferation rate and osteo‐differentiation potential of MC3T3‐E1 pre‐osteoblasts are presented on the PEEK samples with dual functional decoration. In the mouse calvarial defect model, the micro‐CT and histological results demonstrate that our scaffolds display a remarkable bone forming capability. Generally, the PEEK scaffolds co‐endowed with simvastatin and tobramycin microspheres possess great potential in clinics.     

含骨脱细胞基质电纺纤维的成骨性能

通过脱细胞技术制备了猪骨脱细胞基质(DBM), 用胃蛋白酶消化DBM使其变为可溶形式, 采用静电纺丝技术制备了含有DBM的左旋聚乳酸(PLLA)电纺纤维(PLLA/DBM), 并对PLLA/DBM的形貌、 亲水性、 细胞相容性、 成骨性能和体外矿化能力进行评价. 研究结果表明, 脱细胞处理能够有效去除骨组织中的细胞成分, 使DNA含量显著下降. DBM经胃蛋白酶处理后溶于六氟异丙醇(HFIP), 可进行静电纺丝, 制备的PLLA/DBM[m(PLLA)∶m(DBM)=10∶0, 9∶1, 7∶3, 5∶5]电纺纤维具有良好的亲水性, 且无细胞毒性, 对骨髓间充质干细胞的黏附及成骨分化有明显的诱导促进作用, 体外生物矿化效果优良.     

Fabrication of collagen immobilized electrospun poly (vinyl alcohol) scaffolds

In the development of tissue engineering scaffolds, the interactions between material surface and cells play crucial roles. The biomimetic 3‐D scaffolds absolutely provide better results for fulfilling requirements such as porosity, interconnectivity, cell attachment and proliferation. In this study, 3‐D electrospun scaffolds were prepared by using an electrospinning technique. Photo cross‐linkable polyvinyl alcohol was used as a polymeric matrix. During the electrospinning, the nanofibers were cross‐linked with in situ ultraviolet radiation. The crosslinked polymer fibers were achieved in a simple process at a single step. Nanofiber surface was modified with collagen by a chemical approach. The chemical structures were proven by attentuated total reflectance Fourier transform infrared spectroscopy and proton nuclear magnetic resonance. The surface morphology of the nanofibers was characterized by scanning electron microscope (SEM). Morphological investigations show that the resulting nanofibrous matrix has uniform morphology with a diameter of 220–250 nm. In vitro attachment and growth of 3T3 mouse fibroblasts and human umbilical vein endothelial cells (ECV304) cells on polyvinyl alcohol‐based nanofiber mats were also investigated. Cell attachment, proliferation, and methylthiazole tetrazolium cytotoxicity assays indicated good cell viability throughout the culture time, which was also confirmed by SEM analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Mimicking Nanofibrous Hybrid Bone Substitute for Mesenchymal Stem Cells Differentiation into Osteogenesis

Mimicking hybrid extracellular matrix is one of the main challenges for bone tissue engineering (BTE). Biocompatible polycaprolactone/poly(α,β)‐DL ‐aspartic acid/collagen nanofibrous scaffolds were fabricated by electrospinning and nanohydroxyapatite (n‐HA) was deposited by calcium phosphate dipping method for BTE. Human mesenchymal stem cells (hMSCs) were cultured on these hybrid scaffolds to investigate the cell proliferation, osteogenic differentiation by alkaline phosphatase activity, mineralization, double immunofluorescent staining using CD90 and expression of osteocalcin. The present study indicated that the PCL/PAA/collagen/n‐HA scaffolds promoted greater osteogenic differentiation of hMSCs, proving to be a potential hybrid scaffolds for BTE.

     

Fabrication of graphene‐silver/polyurethane nanofibrous scaffolds for cardiac tissue engineering

The graphene‐based nanocomposites are considered as great candidates for enhancing electrical and mechanical properties of nonconductive scaffolds in cardiac tissue engineering. In this study, reduced graphene oxide‐silver (rGO‐Ag) nanocomposites (1 and 2 wt%) were synthesized and incorporated into polyurethane (PU) nanofibers via electrospinning technique. Next, the human cardiac progenitor cells (hCPCs) were seed on these scaffolds for in vitro studies. The rGO‐Ag nanocomposites were studied by X‐ray diffraction (XRD), Raman spectroscopy, and transmission electron microscope (TEM). After incorporation of rGO‐Ag into PU nanofibers, the related characterizations were carried out including scanning electron microscope (SEM), TEM, water contact angle, and mechanical properties. Furthermore, PU and PU/nanocomposites scaffolds were used for in vitro studies, wherein hCPCs showed good cytocompatibility via 3‐(4, 5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) assay and considerable attachment on the scaffold using SEM studies. Real‐time polymerase chain reaction (PCR) and immunostaining studies confirmed the upregulation of cardiac specific genes including GATA‐4, T‐box 18 (TBX 18), cardiac troponin T (cTnT), and alpha‐myosin heavy chain (α‐MHC) in the PU/rGO‐Ag scaffolds in comparison with neat PU ones. Therefore, these nanofibrous rGO‐Ag–reinforced PU scaffolds can be considered as suitable candidates in cardiac tissue engineering.