稀土发光和贮氢材料研究进展

本文结合我们自己的工作总结和概括了稀土发光材料和贮氢材料最近几年来的研究和应用新进展。     

贮氢材料及其应用研究进展

贮氢材料是一类新型高性能材料。本文对现有贮氢材料进行了合理的分类，对贮氢材料及其应用研究进展进行了综述。     

离子束溅射法制备非晶态和晶态Ti-Nj贮氢薄膜合金

粉末贮氢合金作为一种功能材料在许多领域已有广泛应用。而薄膜贮氢合金是80年代国外新开发的功能材料。目前国外制备薄膜贮氢合金的方法主要有热蒸发法(包括闪蒸)和磁控溅射法。最近我们采用一种新颖的制备方法——离子束溅射法研制非晶态、晶态Ti-Ni薄膜合金。     

Laves相贮氢合金及其在Ni／MH电池中的研究进展

Ｌａｖｅｓ相贮氢合金是目前贮氢材料研究与开发的热点之一。本文概述了Ｌａｖｅｓ相合金的结构、贮氢机理、贮氢性能以及它在Ｎｉ／ＭＨ电池应用中的最新进展。     

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用韩剑文，袁满雪，周作祥，赖城明（南开大学化学系天津３０００７１）关键词：贮氢电极，循环寿命，半衰期。前文￣［１］讨论了应用定终点电位放电半衰期法来预测贮氢材料电极循环寿命的问题。本文讨论如何采用定时...     

Mg-Cu-Nd贮氢合金的微观组织结构及贮氢性能研究

采用熔体快淬法制备了(Mg72.2Cu27.8)90Nd10的非晶贮氢合金带,用DSC差热分析仪测定了非晶合金带的热稳定性和非晶形成能力,采用透射电镜TEM和X射线衍射仪表征了不同结晶程度的贮氢合金带的微观组织结构.结果表明:非晶(Mg72.2Cu27.8)90Nd10贮氢合金的晶化过程分为3个步骤:首先在170℃生成平均晶粒尺寸为5～10nm Mg2Cu相;当回火处理温度升高至210℃时,非晶(Mg72.2Cu27.8)90Nd10贮氢合金发生了第二步晶化反应,生成了α-Mg相;当回火处理温度升高到335℃以后,非晶贮氢合金已经完全晶化,生成了稳定的Mg2Cu,α-Mg和Cu5Nd相,晶化后的颗粒尺寸有50～80nm.对不同组织结构的(Mg72.2Cu27.8)90Nd10合金的贮氢性能测试表明:完全非晶状态的(Mg72.2Cu27.8)90Nd10合金具有最快的吸氢速率和最高的贮氢量(3.2%(质量分数)).     

贮氢材料电极循环寿命的定量预测（Ⅰ）─—定终点电位放电半衰期法的应用

贮氢材料电极循环寿命的定量预测（Ⅰ）─—定终点电位放电半衰期法的应用韩剑文，袁满雪，周作祥，赖城明（南开大学化学系３０００７１）关键词：贮氢电极，循环寿命，半衰期目前所应用的贮氢材料电极，一般都具有较高的比容量和较长的使用寿命。因而很需要一种能够定量...     

测试技术在稀土贮氢合金研究中的应用

本文较为详细地介绍了研究稀土贮氢合金性能过程中几种常用的测试技术。在贮氢合金组织结构方面，应用XRD、SEM和金相测试技术，研究贮氢合金的相结构，通过有关公式计算合金晶粒尺寸，以及反映热处理工艺前后相结构、晶粒形貌、晶界的变化情况。在贮氢合金吸放氢机理方面，通过将贮氢合金粉制作成微电极，采用恒电位阶跃、交流阻抗、循环伏安电化学测试技术，研究稀土贮氢合金电极反应的动力学性能，计算合金电极的交换电流密度、氢扩散系数及固／液界面电荷传递电阻等参数；采用PCT测试仪，研究贮氢合金的储氢量、平衡氢压等性能。在贮氢合金电化学性能方面，通过采用模拟电池测试技术，研究贮氢合金的活化、放电容量、放电平台、循环等性能。     

贮氢合金用作硝基苯电解加氢的催化电极研究

贮氢合金用作硝基苯电解加氢的催化电极研究卢世刚，杨汉西，王长发（武汉大学化学系，武汉１３００７２）混合稀土贮氢合金是近年来发展起来的新型功能材料。在室温下它可以吸收比自身体积大几百倍的氢原子形成金属氢化物．这种金属氢化物可作为氢源提供高反应活性的氢原...     

碳纳米管贮氢研究进展

综述了碳纳米管在实验和理论方面的贮氢研究工作。不同科研工作者得到的实验结果很不一致，重量百分比分布在67％～0．01％之间。理论模拟结果差别相对小一些。碳纳米管中的氢吸附受有效表面积和孔体积的强烈影响，单壁碳纳米管堆积的几何形状在氢吸附中也起着重要作用。不少研究者认为碳纳米管并不是适合的贮氢材料。其贮氢量在1(wt)％以下。     

储氢研究进展

氢能是21世纪主要的新能源之一。作为一种新型的清洁能源,氢的廉价制取、安全高效储存与输送及规模应用是当今研究的重点课题,而氢的储存是氢能应用的关键。储氢材料能可逆地大量吸放氢,在氢的储存与输送过程中是一种重要载体。本文综述了目前所采用或正在研究的主要储氢材料与技术,如高压气态储氢、低温液态储氢、金属氢化物储氢、化学氢化物储氢、吸附储氢、金属有机骨架储氢等,比较了各种储氢的优缺点,并指出其相关发展趋势。     

Strategies for the Improvement of the Hydrogen Storage Properties of Metal Hydride Materials

Metal hydrides are an important family of materials that can potentially be used for safe, efficient and reversible on‐board hydrogen storage. Light‐weight metal hydrides in particular have attracted intense interest due to their high hydrogen density. However, most of these hydrides have rather slow absorption kinetics, relatively high thermal stability, and/or problems with the reversibility of hydrogen absorption/desorption cycling. This paper discusses a number of different approaches for the improvement of the hydrogen storage properties of these materials, with emphasis on recent research on tuning the ionic mobility in mixed hydrides. This concept opens a promising pathway to accelerate hydrogenation kinetics, reduce the activation energy for hydrogen release, and minimize deleterious possible by‐products often associated with complex hydride systems.     

Some lessons from the development of metal hydride chemistry in the light of hydrogen storage problems

The main trends of the chemistry of hydrides of transition metals and their alloys are briefly reviewed. “Sensational” hydrogen capacity data and the potential of some metal materials (metals, alloys, and quasi-crystals) and carbon nanomaterials in reversible hydrogen storage applications are critically analyzed. The significance of research in this field for hydrogen energy applications is underlined.     

含金金属纳米颗粒用于液相化学氢化物催化制氢

液相化学氢化物以化学键的形式储存氢能,被认为是一类很有前景的化学储氢材料。液相化学氢化物的大规模应用很大程度上依赖于高效催化系统的开发。含金金属纳米颗粒在用于液相化学氢化物催化制氢中表现出优异的催化性能。本文综述了金纳米颗粒和含金异金属纳米颗粒用于液相氢化物催化制氢的最新研究进展。     

First-principles study of Ti-catalyzed hydrogen chemisorption on an Al surface: a critical first step for reversible hydrogen storage in NaAlH4

Complex metal hydrides are perhaps the most promising hydrogen storage materials for a gradual transformation to a hydrogen-based economy. We have used a computational approach to aid the ongoing experimental effort to understand the reversible hydrogen storage in Ti-doped NaAlH(4) and propose a plausible first step in the rehydrogenation mechanism. The study provides insight into the catalytic role played by the Ti atoms on an Al surface in the chemisorption of molecular hydrogen and identifies the local arrangement of the Ti atoms responsible for the process. Our results can potentially lead to ways of making other similar metal hydrides reversible.     

孔性介质负载下的络合氢化物及其储氢特性

络合氢化物具有较高的重量储氢密度,已成为国内外研究的热点。孔性介质由于高比表面积、孔径均匀可调以及良好热稳定性而备受关注。研究表明,实现孔性介质负载的络合氢化物可有效地改善其储氢性能。本文简述了孔性介质的结构特征和物化特性,着重阐述了孔性介质负载催化络合氢化物的制备方法、脱/加氢性能的影响及其催化机理的研究进展,并指出了需要研究的科学问题。     

Materials for hydrogen storage: current research trends and perspectives

Storage and transport of hydrogen constitutes a key enabling technology for the advent of a hydrogen-based energy transition. Main research trends on hydrogen storage materials, including metal hydrides, porous adsorbents and hydrogen clathrates, are reviewed with a focus on recent developments and an appraisal of the challenges ahead. .     

A dehydrogenation mechanism of metal hydrides based on interactions between Hdelta+ and H-

This paper describes a reaction mechanism that explains the dehydrogenation reactions of alkali and alkaline-earth metal hydrides. These light metal hydrides, e.g., lithium-based compounds such as LiH, LiAlH4, and LiNH2, are the focus of intense research recently as the most promising candidate materials for on-board hydrogen storage applications. Although several interesting and promising reactions and materials have been reported, most of these reported reactions and materials have been discovered by empirical means because of a general lack of understanding of any underlying principles. This paper describes an understanding of the dehydrogenation reactions on the basis of the interaction between negatively charged hydrogen (H-, electron donor) and positively charged hydrogen (Hdelta+, electron acceptor) and experimental evidence that captures and explains many observations that have been reported to date. This reaction mechanism can be used as a guidance for screening new material systems for hydrogen storage.     

Some New Molecular Hydrides Stabilized and Characterized with the Aid of the Matrix‐Isolation Technique

New molecular hydrides have been prepared and characterized with the aid of the matrix isolation technique. These hydrides are products of spontaneous or photoactivated reactions taking place in the matrix. They show a remarkable structural variety reflecting the ability of H atoms to be positively or negatively polarized and to be engaged in terminal as well as bridging bonds. In addition to the academic interest in these molecules, the findings are of interest for applications. Thus the results will be discussed especially in the light of the increasing effort to fabricate new molecular hydrogen storage materials.     

Determination of the heat of hydride formation/decomposition by high-pressure differential scanning calorimetry (HP-DSC)

Among the thermodynamic properties of novel materials for solid-state hydrogen storage, the heat of formation/decomposition of hydrides is the most important parameter to evaluate the stability of the compound and its temperature and pressure of operation. In this work, the desorption and absorption behaviors of three different classes of hydrides are investigated under different hydrogen pressures using high-pressure differential scanning calorimetry (HP-DSC). The HP-DSC technique is used to estimate the equilibrium pressures as a function of temperature, from which the heat of formation is derived. The relevance of this procedure is demonstrated for (i) magnesium-based compounds (Ni-doped MgH2), (ii) Mg-Co-based ternary hydrides (Mg-CoHx) and (iii) Alanate complex hydrides (Ti-doped NaAlH4). From these results, it can be concluded that HP-DSC is a powerful tool to obtain a good approximation of the thermodynamic properties of hydride compounds by a simple and fast study of desorption and absorption properties under different pressures.