首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
以硅酸钠、硝酸铈铵为原料,十六烷基三甲基溴化铵为模板剂,通过水热法合成铈掺杂的介孔分子筛CeMCM-41.分别采用X射线粉末衍射(XRD)、透射电子显微镜(TEM)、红外光谱(FT-IR)、紫外-可见分光光度计(UV-Vis)和N2吸附-脱附等技术对产物的晶相、结构、形貌、比表面积和孔径进行表征.同时研究硅铈物质的量比对合成材料结构性能的影响.实验结果表明:水热条件下成功合成出铈掺杂的MCM-41介孔分子筛,其比表面积为480.5~1 295.2m2/g,平均孔径在2.70~6.29 nm之间.随着稀土元素铈的掺杂量的增加,CeMCM-41介孔分子筛的比表面积和孔体积变小,介孔有序性变差.  相似文献   

2.
原位合成负载型MSU系列分子筛   总被引:1,自引:1,他引:0  
采用原位合成法,使用壬基酚聚氧乙烯醚(Tx-15)和脂肪醇聚氧乙烯醚(AEO-19)做为模板剂,在中性条件下合成W.MSU-1和W-MSU-2介孔分子筛,合成中使用乙酰丙酮(HAcac)作为助剂,考察其对介孔结构的影响,通过X射线衍射仪(XRD)、傅里叶红外光谱仪(FT-IR)、扫描电镜(SEM)、低温N2吸附对样品进行表征.结果表明,加入过渡金属氧化物有助于介孔的形成,助剂的使用提高了孔的结构参数.  相似文献   

3.
利用EDTANa2作为矿化剂, 在近中性条件下于室温合成了厚壁(约3 nm)蠕虫介孔分子筛. 在反应物配比为n(CTAB):n(TEOS):n(EDTANa2):n(H2O)=(0.05~0.2):(0.1~2):(0.1~0.5):(100~500)范围内都能得到介孔二氧化硅. 以XRD、N2吸附、FTIR、SEM和TEM详细考察了体系配比和温度对介孔二氧化硅结构和形貌的影响, 发现CTAB用量越大, 介孔d值相应增大. 温度对介孔二氧化硅的结构和形貌有很大的影响, 温度在2~15 ℃范围内都能生成孔径分布较规则的介孔, 介孔材料的形貌随温度的升高由空心管变成小颗粒聚集体; 合成的介孔分子筛中的模板剂可以通过乙醇萃取的方式除去. 提出了介孔的生成遵从(S+-E-)0-I0中性模板机理.  相似文献   

4.
以三嵌段共聚物F127为模板剂,酚醛树脂为碳源,正硅酸乙酯为硅源,三组分共组装合成介孔碳-氧化硅纳米复合物,再经HF去除氧化硅,得到有序介孔碳(OMC).X射线衍射(XRD)、透射电子显微镜(TEM)、低温N2吸脱附(BET)等测试表明,所得样品具有高度有序的介孔结构,比表面积和孔容分别为1330m2·g-1和2.13cm3·g-1,平均孔径6.4nm.对其先氧化、后氯化、再胺化,得到不同胺基接枝量的胺化介孔碳(C-NH2(m),m为加入的乙二胺的质量(g)).傅里叶变换红外(FT-IR)光谱表征结果证实,胺基官能团成功接枝到有序介孔碳表面.TEM测试表明介孔碳的有序孔道结构得到了较好的保持.以有序介孔碳、胺化介孔碳作吸附剂对Cu(Ⅱ)、Cr(Ⅵ)进行选择性吸附研究.结果表明:功能化修饰前,样品对Cu(Ⅱ)、Cr(Ⅵ)饱和吸附量分别为213.33、241.55mg·g-1;修饰后饱和吸附量可分别达到495.05、68.21mg·g-1.功能化介孔碳表现了较强的选择性吸附Cu(Ⅱ)的能力.  相似文献   

5.
通过一种新颖的方法,即软模板-固液技术(CSSL)合成具有高比表面积的介孔纳米晶体氧化锆.首先,通过软模板法以1-十六烷基-3-甲基咪唑溴(C16mim+Br-)为结构导向剂,硫酸锆为无机前驱物合成了介观相氧化锆杂化物,然后该杂化物与固体硝酸铜无机盐研磨并进行热处理.在600℃焙烧后所得到的氧化锆材料具有蠕虫状介孔结构,且孔壁由尺寸约为2.50nm的四方相氧化锆纳米粒子组成.该材料的比表面积为240.0m2·g-1,孔径为4.10nm.与之对应,使用单一的软模板法在相同的温度焙烧后,所得到的氧化锆材料介孔结构坍塌,比表面积仅为9.5m·2g-1.  相似文献   

6.
雒旭  季东  钱广  吕高孟  齐彦兴 《分子催化》2006,20(5):409-413
在强酸性条件下沿“S X-I ”路线合成了具有立方结构(空间点群为Pm3n)的含Sn介孔分子筛SBA-1,并通过多种手段对其进行表征:XRD显示合成的介孔材料具有良好有序的立方结构,N2吸脱附测得样品有大的孔径(≈2nm)和比表面积(>1100m2g-1),UV-vis和FT-IR证明杂原子Sn替代S i进入分子筛骨架,并且以高分散四面体配位形式存在于分子筛骨架中,SEM则确定合成出来的材料为球形颗粒,粒径在2-4μm之间.  相似文献   

7.
在极稀溶液中, 通过改变反应溶剂去离子水的量或原料中铝源的量, 可控合成了不同粒径(20~70 nm)、形貌和孔道结构的纳米介孔氧化硅颗粒和纳米介孔铝掺杂氧化硅材料. 这种材料具有高比表面积(BET比表面积1000 m2/g)和较大的孔容(1.1~1.8 cm3/g). 反应物浓度降低或反应物中添加铝源后, 介孔材料的有序性下降, 粒径减小, 孔容增大, 并产生大量的间隙孔. 通过小角X射线衍射(SAXRD)、透射电镜和氮气吸附-脱附实验表征了样品.  相似文献   

8.
通过原位合成的方法,以[Zn(OH)x]-(x-2)(x>2)为锌源、正硅酸乙酯(TEOS)为硅源,合成了孔壁为ZnO/SiO2复合结构的MCM-48型有序介孔分子筛,并通过XRD、XPS、N2吸附-脱附等温线等手段对样品进行了表征,结果表明,锌以正二价离子的形式均匀的分布在MCM-48分子筛的孔壁结构中.另外,适量掺锌所合成的Zn-MCM-48介孔材料仍然保持立方介孔的有序结构,具有较高的比表面积、较高的孔容和较宽的孔径分布.  相似文献   

9.
筛选出两种孔径较大且孔结构规则的植物为大孔模板,以嵌段共聚物为介孔相模板成功合成了两种具有连续的骨架和贯通的大孔孔道(大孔孔径大于40μm,其孔壁为介孔相)的高度有序多级复合孔材料.对该复合孔材料进行了水热稳定性研究.用扫描电子显微镜(SEM)、粉末X射线衍射仪(XRD)、高分辨率透射电镜(HRTEM)以及N2吸附-脱附等测试手段对合成的样品进行了表征.结果表明,合成的产物是孔道相互贯通的多级有序复合孔硅材料,具有较好的水热稳定性.采用此合成方法可精确地复制大孔植物模板.  相似文献   

10.
SBA-15负载CeO2纳米晶的溶胶-凝胶一步合成   总被引:2,自引:0,他引:2  
以P123为模板剂, 正硅酸乙酯和硝酸铈为前驱体, 通过溶胶-凝胶路线在酸性条件下合成了SBA-15负载氧化铈(CeO2与SiO2质量比为28.7%)有序介孔材料. 采用热重/差热分析(TGA/DTA)、X射线衍射(XRD)、透射电镜(TEM)和氮气吸附等手段对所合成材料进行了表征. 结果表明, 合成的材料具有类似于SBA-15的结构, 孔径、孔容和比表面积分别为38.7 Å, 0.46 cm3/g和570 m2/g. X射线衍射(XRD)、透射电镜(TEM)、X射线能谱(EDS)和选区电子衍射花样联合表征证实了铈物种以高分散的CeO2纳米晶的形式分布在介孔基体中.  相似文献   

11.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

13.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

14.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

15.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

16.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

17.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

18.
An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.  相似文献   

19.
Zhanhui Yang  Shiyi Yang  Jiaxi Xu 《Tetrahedron》2017,73(23):3240-3248
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.  相似文献   

20.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号