柔性间隔基对于香豆素取代二乙炔LB膜聚合及手性形成的影响

设计合成了2种香豆素取代二乙炔单体,7-(10,12-二十三双炔酰氧基)-香豆素(CODA)和7-(10,12-二十三双炔酰氧乙氧基)-香豆素(CO2DA),研究了柔性间隔基对香豆素取代二乙炔单体在气-液界面的组装、单体LB膜的聚合以及聚二乙炔主链螺旋结构形成的影响.利用Langmui-Blodgett(LB)技术,以纯水为亚相,膜压在35 mN/m时沉积制备了香豆素取代二乙炔单体LB膜.尽管CODA是非手性的,但其LB膜均表现出明显的宏观手性信号.这是由于在压缩过程中香豆素基团间强烈的π-π堆积,形成了螺旋排列,显示出超分子手性.而CO2DA LB膜无明显CD信号.经254 nm紫外光辐照,CODA LB膜聚合成蓝相,聚二乙炔主链表现出明显的宏观手性.而CO2DA LB膜聚合后无明显的CD信号.薄膜中香豆素功能基团的不规则排列不利于二乙炔单体的固态聚合以及聚二乙炔主链螺旋结构的形成.     

Fabrication of chiral Langmuir-Schaefer films of achiral amphiphilic Schiff base derivatives through an interfacial organization

Supramolecular chirality in the Langmuir-Schaefer (LS) films of two achiral amphiphilic Schiff bases, 2-(2'-benzimidazolyliminomethyl)-4-octadecyloxyphenol (BSC18) and 2-(2'-benzthiazolyliminomethyl)-4-octadecyloxyphenol (TSC18), was investigated. Both of these amphiphiles could form LS films from the water surface or coordinate with Ag(I) in the subphase to form Ag(I)-coordinated LS films. Although both of these amphiphiles were achiral, TSC18 formed a chiral LS film from the water surface, while BSC18 formed a chiral Ag(I)-coordinated LS film from the aqueous AgNO3 subphase. The supramolecular chirality in these LS films was suggested to be due to a cooperative stereoregular pi-pi stacking of the functional groups together with the long alkyl chains in a helical sense. The relationship between the chirality of the LS films and the molecular structures of TSC18 and BSC18 as well as their H-bond or coordination behaviors was discussed. The Schiff base films showed a reversible color change upon exposure to HCl and NH3 gas alternatively; however, the supramolecular chirality was irreversible during these processes.     

Synthesis and photochromism of spirobenzopyrans and spirobenzothiapyran derivatives bearing monoazathiacrown ethers and noncyclic analogues in the presence of metal ions

Spirobenzopyrans bearing monoazathiacrown ethers and noncyclic analogues were synthesized, and their ion-responsive photochromism depending on the dual metal ion interaction with the crown ether and the phenolate anion moieties was examined using alkali and alkaline-earth metal ions, Ag(+), Tl(+), Pb(2+), Hg(2+), and Zn(2+). The prepared spirobenzopyrans showed a selective binding ability to Mg(2+) and Ag(+) with negative and positive photochromism, respectively. Among the metal ions, only Ag(+) facilitated photoisomerization to the corresponding merocyanine form. Depending on the ring size of the monoazathiacrown ether moieties, soft metal ions such as Hg(2+) and Ag(+) showed significant shifts in the UV-vis absorption spectra, while hard metal ions such as Mg(2+), Zn(2+), and Pb(2+) did not afford any meaningful shift. This result reflects that the monoazathiacrown ether and phenolate anion moieties prefer soft and hard metal ions, respectively. Therefore, the Mg(2+) and Ag(+) selectivities are mainly derived from the phenolate anion and monoazathiacrown ether moieties, respectively. On the other hand, a spirobenzothiapyran bearing 3,9-dithia-6-monoazaundecane showed a remarkable selectivity to Ag(+).     

Supramolecular assemblies of a series of 2-arylbenzimidazoles at the air/water interface: in situ coordination, surface architecture and supramolecular chirality

The spreading behavior and supramolecular assemblies of some arylbenzimidazoles with 2-substituted aromatic groups such as phenyl, naphthyl, anthryl and pyrenyl on water surface and the subphase containing AgNO3 were investigated. It was observed that although these compounds lack long alkyl chains, they showed surface activity when spread from chloroform solution on water surface and formed the supramolecular assemblies. When AgNO3 was present in the subphase, a coordination between the imidazole group of the compounds and Ag(I) occurred in situ in the spreading film, which was verified by the surface pressure/area (pi-A) isotherms and UV/Vis absorption spectra. Both the spreading films from water and the aqueous AgNO3 subphase were transferred onto solid substrates and their surface morphologies as well as properties were characterized by AFM, UV/Vis absorption and CD spectra. Various surface morphologies such as nanoparticles, block domains and nanoutensils were observed depending on the substituted aromatic groups. Interestingly, although all of these compounds were achiral, supramolecular chirality was obtained for some of the arylbenzimidazole films assembled from either the water surface or the subphase containing AgNO3. It was revealed that chiral assemblies could be obtained from water surface for the benzimidazoles which have pyrenyl or alpha-naphthyl groups. For benzimidazole derivative with anthryl group, chiral assemblies could be obtained when spreading on the aqueous AgNO3 subphase. For the benzimidazoles with phenyl or beta-naphthyl groups, no chirality was obtained. It was suggested that both the overcrowded stacking of the aromatic groups and the cooperative arrangement of the molecules on water surface or aqueous AgNO3 subphase play a crucial role in forming the chiral supramolecular assemblies.     

Oxidative cyclization of thiosemicarbazone: an optical and turn-on fluorescent chemodosimeter for Cu(II)

A weakly fluorescent thiosemicabazone (L(1)H) was found to be a selective optical and "turn-on" fluorescent chemodosimeter for Cu(2+) ion in aqueous medium. A significant fluorescence enhancement along with change in color was only observed for Cu(2+) ion; among the other tested metal ions (viz. Na(+), K(+), Mg(2+), Ca(2+), Cr(3+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), Ag(+), Ni(2+), Co(2+), Fe(3+) and Mn(2+)). The Cu(2+) selectivity resulted from an oxidative cyclization of the weak fluorescent L(1)H into highly fluorescent rigid 4,5-dihydro-5,5-dimethyl-4-(naphthalen-5-yl)-1,2,4-triazole-3-thione (L(2)). The signaling mechanism has been confirmed by independent synthesis with detail characterization of L(2).     

Development and applications of fluorescent indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.     

Structure Studies on Ion Coordination in 2,4-Dihydroxy-N-Octadecybenzylideneamine LB Films by UV-Vis Absorption and FTIR Spectroscopy

The coordination reaction of Cu(2+) ions with the Schiff base amphiphile 2,4-dihydroxy-N-octadecylbenzylideneamine in ultrathin organic LB films was probed by Fourier transform infrared (FTIR) transmission spectroscopy and UV-Vis electronic absorption spectroscopy. FTIR spectral changes owing to LB films of 2,4-dihydroxy-N-octadecylbenzylideneamine contacting aqueous Cu(OAC)(2) solution suggest the formation of ion-coordination films, which is corroborated by UV-Vis absorption spectra. The coordination reaction of the annealing film at different temperatures suggests that the microstructure of LB films had an important effect on the reaction rate. Detailed analysis shows that ion-coordination films take an isotropic unaxial orientation and exhibit phase transition behavior, which is determined by the different complex structures of headgroups and of subphase and surface film. Copyright 2000 Academic Press.     

A squaraine-based colorimetric and "turn on" fluorescent sensor for selective detection of Hg2+ in an aqueous medium

A novel squaraine-based chemosensor SQ-1 has been synthesized, and its sensing behavior toward various metal ions was investigated by UV-vis and fluorescence spectroscopies. In AcOH-H(2)O (40:60, v/v) solution, Hg(2+) ions coordinate with SQ-1 causing a deaggregation which induces a visual color and absorption spectral changes as well as strong fluorescence. In contrast, the addition of other metals (e.g., Pb(2+), Cd(2+), Cu(2+), Zn(2+), Al(3+), Ni(2+), Co(2+), Fe(3+), Ca(2+), K(+), Mg(2+), Na(+), and Ag(+)) does not induce these changes at all. Thus SQ-1 is a specific Hg(2+) sensing agent due to the inducing deaggregation of the dye molecule by Hg(2+).     

Evaluation of the metal binding properties of a histidine-rich fusogenic peptide by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) was used to investigate metal ion interactions of the 18 amino acid peptide fragment B18 (LGLLLRHLRHHSNLLANI), derived from the membrane-associated protein bindin. The peptide sequence B18 represents the minimal membrane-binding motif of bindin and resembles a putative fusion peptide. The histidine-rich peptide has been shown to self-associate into distinct supramolecular structures, depending on the presence of Zn(2+) and Cu(2+). We examined the binding of B18 to the metal ions Cu(2+), Zn(2+), Mg(2+), Ca(2+), Mn(2+) and La(3+). For Cu(2+), we compared the metal binding affinities of the wild-type B18 peptide with those of its mutants in which one, two or three histidine residues have been replaced by serines. Upon titration of B18 with Cu(2+) ions, we found sequential binding of two Cu(2+) ions with dissociation constants of approximately 34 and approximately 725 micro M. Mutants of B18, in which one histidine residue is replaced by serine, still exhibit sequential binding of two copper ions with affinities for the first Cu(2+) ion comparable to that of wild-type B18 peptide, but with a greatly reduced affinity for the second Cu(2+) ion in mutants H112S and H113S. For mutants in which two histidines are replaced by serines, the affinity for the first Cu(2+) ion is reduced approximately 3-10 times in comparison with B18. The mutant in which all three histidine residues are replaced by serines exhibits an approximately 14-fold lower binding for the first Cu(2+) ion compared with B18. For the other metal ions under investigation (Zn(2+), Mg(2+), Ca(2+), Mn(2+) and La(3+)), a modest affinity to B18 was detected binding to the peptide in a 1 : 1 stoichiometry. Our results show a high affinity of the wild-type fusogenic peptide B18 for Cu(2+) ions whereas the Zn(2+) affinity was found to be comparable to that of other di- and trivalent metal ions.     

Terphenyl-phenanthroline conjugate as a Zn(2+) sensor: H(2)PO(4)(-) induced tuning of emission wavelength

A new terphenyl-based macrocycle 5 incorporating phenanthroline as a fluorophore has been designed, synthesized and examined for its recognition ability toward various cations (Pb(2+), Hg(2+), Ba(2+), Cd(2+), Ag(+), Zn(2+), Cu(2+), Ni(2+), Co(2+), K(+), Mg(2+), Na(+) and Li(+)) by UV-vis, fluorescence and NMR spectroscopy. The receptor 5 showed highly selective 'Off-On' fluorescence signaling behavior for Zn(2+) ions in THF. Interestingly, the addition of H(2)PO(4)(-) ions to the [5-Zn] complex regulates the binding site for additional Zn(2+) ions and hence leads to a blue-shifted emission band.     

Self-assembled spiral nanoarchitecture and supramolecular chirality in Langmuir-Blodgett films of an achiral amphiphilic barbituric acid

An amphiphilic barbituric acid derivative was found to form stable monolayers showing a clear phase transition at the air/water interface. It is interesting to find that the deposited Langmuir-Blodgett (LB) films of the compound showed circular dichroism (CD) although the molecule itself was achiral. AFM measurements on the transferred one-layer LB film revealed that spiral nanoarchitectures were formed. It was further found that the supramolecular chirality of the LB films was related to symmetry breaking at the interface. Hydrogen bonding and the pi-pi stacking between the neighboring molecules resulted in chiral fibers which formed the spiral structures. To the best of our knowledge, this is the first report on the chirality of the molecular assemblies and spiral nanostructures formed through the air/water interface by achiral molecules.     

Silver(I)-selective membrane electrodes based on sulfur-containing podands

Some podands, acyclic polyethers, were utilized as membrane active components to prepare Ag(+)-selective polymeric membrane electrodes. The thiapodand-based electrodes exhibited considerable selectivity toward Ag(+) over other heavy metal ions including Cd(2+), Pb(2+), Cu(2+) and Hg(2+). Also, good selectivity over alkali and alkali earth metal ions were observed. Response slopes, pH effects, response time, and signal baseline return of the sensor systems were studied in static mode and/or in a flow-injection system. The Ag(+)-selectivity was explained by the soft-soft interaction of the Ag(+) ion with the sulfur donor atoms as well as the stacking interaction between aromatic end groups of the host molecule on complexation.     

Poly(amine ester) dendrimer with naphthyl units as a fluorescent chemosensor for Al(III), Cu(II), and Zn(II).

A poly(amine ester) dendrimer with naphthyl units (G1N6) has been synthesized as a fluorescent chemosensor for metal ions. We investigated the metal-ion recognition of G1N6 by adding each of Ag(+), Al(3+), Ba(2+), Ca(2+), Cd(2+), Co(2+), Cu(2+), Fe(3+), Mg(2+), Ni(2+), and Zn(2+) in acetonitrile solution. Large changes were observed in the fluorescence spectra of G1N6 upon the addition of Al(3+), Cu(2+), and Zn(2+).     

A novel fluorescent sensor for metal cations and protons based of bis-1,8-naphthalimide

A newly synthesized bis-1,8-naphthalimide aimed to increase its fluorescence intensity in the presence of protons or metal cations has been investigated. Its spectral photophysical characteristics in acetonitrile and chloroform solutions are described. The influence of metal cations (Zn(2+), Ni(2+), Ce(3+), Co(2+), Cu(2+) and Ag(+)) and protons on the fluorescence intensity has been investigate with regard to obtain fluorescence sensors for this ions in the environment.     

Magic sized ZnS quantum dots as a highly sensitive and selective fluorescence sensor probe for Ag+ ions

A green and simple chemical synthesis of magic sized water soluble blue-emitting ZnS quantum dots (QDs) has been accomplished by reacting anhydrous Zn acetate, sodium sulfide and thiolactic acid (TLA) at room temperature in aqueous solution. Refluxing of this mixture in open air yielded ZnS clusters of about 3.5 nm in diameter showing very strong and narrow photoluminescence properties with long stability. Refluxing did not cause any noticeable size increment of the clusters. As a result, the QDs obtained after different refluxing conditions showed similar absorption and photoluminescence (PL) features. Use of TLA as a capping agent effectively yielded such stable and magic sized QDs. The as-synthesized and 0.5 h refluxed ZnS QDs were used as a fluorescence sensor for Ag(+) ions. It has been observed that after addition of Ag(+) ions of concentration 0.5-1 μM the strong fluorescence of ZnS QDs was almost quenched. The quenched fluorescence can be recovered by adding ethylenediamine to form a complex with Ag(+) ions. The other metal ions (K(+), Ca(2+), Au(3+), Cu(2+), Fe(3+), Mn(2+), Mg(2+), Co(2+)) showed little or no effect on the fluorescence of ZnS QDs when tested individually or as a mixture. In the presence of all these ions, Ag(+) responded well and therefore ZnS QDs reported in this work can be used as a Ag(+) ion fluorescence sensor.     

Selective colorimetric sensing of Cu2+ using triazolyl monoazo derivative

Although the high sensitivity, high selectivity and fast response make emission (fluorescence) based technique as one of the most promising tool for developing the chemosensors for metal ions, the past few years have witnessed a demand for the absorption based chemosensors for paramagnetic heavy metal ions, especially Cu(2+). Being paramagnetic, Cu(2+) leads to the low signal outputs ("turn-off") caused by decreased emission which may sometimes give false positive response, rendering the emission based technique less reliable for analytical purposes. Herein, we report synthesis and characterization of a hetarylazo derivative, characterized by a strong charge-transfer band which gets attenuated convincingly in the presence of Cu(2+) leading to distinct naked-eye color change (yellow to purple), and to a lesser extent in the presence of Cd(2+), Zn(2+), Co(2+), Pb(2+), Fe(2+), Ni(2+), Fe(3+) and Hg(2+) for which the naked eye sensitivity was comparatively (w.r.t. Cu(2+)) much less. No response was observed for the other metal ions including Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Mn(2+), Ag(+), Zn(2+), Cd(2+), Pb(2+), and lanthanides Ce(3+), La(3+), Pr(3+), Eu(3+), Nd(3+), Lu(3+), Yb(3+), Tb(3+), Sm(3+), Gd(3+). The proposed sensing mechanism has been ascribed to the stabilization of LUMO after complexation with Cu(2+) and a 1:1 stoichiometry has been deduced.     

Formation, structure, and morphology of triazole-based Langmuir-Blodgett films

The formation, morphology, and structure of two-dimensional Langmuir-Blodgett (LB) assemblies of octadecyltriazole (ODT)-based metal-containing oligomers presenting, in the case of iron, the spin-crossover phenomenon is studied with Brewster angle microscopy, IR dichroism, X-ray diffraction, and atomic force microscopy. Two processes occurring at the air-water interface are confirmed to dominate the mechanism of formation of these LB films, the instability of the coordination polymers at the air-water interface and recoordination of metal ions in the subphase at the interface during the LB deposition process. The Langmuir film allowing the LB film formation is mostly made of ODT. The films do present a lamellar structure in which the ODT molecules are tilted and incorporate coordinated isolated metal ions and oligomers of metal ions. The morphology of the LB films is globally flat but with a rather high roughness resulting from inhomogeneities related to phenomena occurring during the LB film formation. These observations are in agreement with the relative affinity of the metal ions with ODT and the relative stability of the coordination polymers at the air-water interface, which have been determined for the group Cu-Fe-Co-Ni.     

Formation and dissociation kinetics of triaza-crown-alkanoic acid complexes of transition metal(II) and lanthanide (III)

The formation and dissociation rates of some transition metal(II) and lanthanide(III) complexes of the 1,7,13-triaza-4,10,16-trioxacyclooctadecane N',N',N'-triacetic acid (1) and 1,7,13-triaza-4,10,16-trioxacyclooctadecane-N',N',N'- trimethylacetic acid (2) have been measured by the use of stopped-flow and conventional spectrophotometry. Experimental observations were made at 25.0 +/- 0.1 degrees C and at an ionic strength of 0.10 M KCl. The complexation of Zn(2+) and Cu(2+) ions with 1 and 2 proceeds through the formation of an intermediate complex (MH(3)L(+) *) in which the metal ion is incompletely coordinated. This may then lead to a final product in the rate-determining step. Between pH 4.68 and 5.55, the diprotonated (H(2)L(-)) form is revealed to be a kinetically active species despite its low concentration. The stability constants (log K (MH (3)L (+) *)) and specific base-catalyzed rate constants (k(OH)) of intermediate complexes have been determined from the kinetic data. The dissociation reactions of 1 and 2 complexes of Co(2+), Ni(2+), Zn(2+), Ce(3+), Eu(3+) and Yb(3+) were investigated with Cu(2+) ions as a scavenger in acetate buffer. All complexes exhibit acid-independent and acid-catalyzed contributions. The buffer and Cu(2+) concentration dependence on the dissociation rate has also been investigated. The metal and ligand effects on the dissociation rate of some transition metal(II) and lanthanide(III) complexes are discussed in terms of the ionic radius of the metal ions, the side-pendant arms and the rigidity of the ligands.     

Ribonucleic acid as a novel ionophore for potentiometric membrane sensors of some transition metal ions

Ribonucleic acid (RNA) is used as a novel ionophore in plasticized poly(vinyl chloride) matrix membrane sensors for some transition metal ions. Membranes incorporating RNA and doped in Cu(2+), Cd(2+) and Fe(2+) display fast near-Nernstian and stable responses for these ions with cationic slopes of 31.1, 31.3 and 35.5 mV per decade, respectively, over the concentration range 10(-6)-10(-2) M and pH range 4-6.5. The cadmium RNA-based sensor shows no interference by Cu(2+), Fe(2+) Hg(2+) and Ag(+), which are known to interfere significantly with the solid-state CdS/Ag(2)S membrane electrode. The copper RNA-based sensor displays general potentiometric characteristics similar to those based on macrocyclic ionophores and organic ion exchangers and has the advantage of a better selectivity for Cu(2+) over some alkaline earth, divalent and transition metal ions. The iron RNA-based membrane sensor exhibits no interference by Hg(2+) and Zn(2+), which are known to interfere with other previously suggested sensors. The nature and composition of the RNA ionophore and its cadmium complex are examined using electrophoresis, Fourier-transform infrared analysis, elemental analysis and X-ray fluorescence techniques.     

Lignin from sugar cane bagasse: extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels through impedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.