Ni2（OEt）2／SiO2催化二氧化碳与丙烯直接合成甲基丙烯酸的研究

 采用表面改性法制备了负载型Ni2（OEt）2／SiO2双核金属乙氧基配合物催化剂，利用示差量热、红外光谱和微反技术对催化剂的表面结构、热稳定性、化学吸附性质和催化活性进行了研究．结果表明，负载型双核金属乙氧基配合物Ni2（OEt）2／SiO2中的Ni2＋与载体SiO2表面的O2－以双齿配位形式键合；二氧化碳在催化剂表面存在桥式吸附态和碳酸单乙酯基物种两种吸附态，丙烯则只有一种分子吸附态；在适宜的反应条件下，二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂上的反应产物主要是甲基丙烯酸．根据实验结果，提出了二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂表面的反应机理，反应物分子共吸附于催化剂表面同一活性单元上，羧酸根和丙烯解离吸附态的形成是反应顺利进行的关键步骤．     

二氧化碳和丙烯在Cu2(OEt)2/SiO2催化下超临界合成甲基丙烯酸

负载型双核金属乙氧基配合物催化剂Cu2(OEt)2／SiO2采用表面改性法制备。运用滴定、IR、DSC和超临界反应技术对催化剂的表面结构、化学吸附性质和反应性能进行了研究。结果表明：负载型双核金属乙氧基配合物Cu2(OEt)2／SiO2中Cu”与载体SiO2表面O^2-以双齿配位形式键合，存在Cu2(OEt)2双核结构；二氧化碳在催化剂表面吸附形式形成桥式和乙氧碳酸酯基物种两种吸附态，丙烯则只有一种分子吸附态；在超临界的反应条件下，二氧化碳和丙烯在Cu2(OEt)2／SiO2催化剂上可以高选择性地合成甲基丙烯酸；反应物分子共吸附于催化剂表面，同一活性基元以及羧酸根与丙烯解离吸附态的形成是反应顺利进行的关键因素。     

负载型Sn2(OMe)4/SiO2催化剂的制备及其催化CO2和CH3OH直接合成碳酸二甲酯的性能

 采用表面改性法制备了负载型Sn2（OMe）4／SiO2双核桥联配合物催化剂，用IR，TPD和微反技术对催化剂的表面结构、化学吸附性质和催化活性进行了研究．结果表明，双核桥联Sn2（OMe）4／SiO2配合物中存在Sn－O－Si双齿配位形式，甲氧基以桥基形式联结两个Sn4＋离子；CO2在催化剂表面以桥式吸附态和甲氧碳酸酯基吸附态存在，而CH3OH只以分子吸附态存在．在反应温度413K，压力0．5MPa，反应空速1500h－1以及CH3OH与CO2的摩尔比为2～2．5的反应条件下，CO2和CH3OH在Sn2（OMe）4／SiO2催化剂上生成碳酸二甲酯的选择性达到近100％．根据实验结果，提出了CO2与CH3OH在Sn2（OMe）4／SiO2催化剂表面上的反应机理，反应物分子共吸附于催化剂表面同一活性位上及CO2的甲氧碳酸酯基吸附态的形成是反应顺利进行的关键因素．     

Ni(OCH3)2/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换相结合的方法，制备了负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2催化剂。利用IR、TPD、TPSR和微反技术，考察了催化剂的表面结构以及CO2、CH3OH在催化剂表面上的化学吸附和反应性能。结果表明，负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2中，Ni^2 与载体SiO2表面的O^2-以双齿形式配位；在催化剂表面存在CO2的桥式吸附态和甲氧碳酸酯基物种两种吸附态，CH3OH则只有一种分子吸附态。在373-473K条件下，CO2和CH3OH在催化剂上的反应物主要是DMC、H2O以及少量的CO、CH4和CH2O，催化剂的活性由表面甲氧碳酸酯基物种与分子吸附态甲醇的反应决定的。讨论了催化剂上CO2和CH3OH的活化过程及吸附态的形成机理。     

超临界条件下负载型配合物催化剂Cu2(μ-OEt)2/SiO2合成碳酸二甲酯的反应性能

采用表面改性和离子交换相结合的方法制备了负载型配合物Cu2(μ-OEt)2／SiO2催化剂，用化学分析、IR、TPD和超临界反应技术考察了催化剂的表面构造、CO2和甲醇在催化剂上的化学吸附及超临界条件下的反应性能，结果表明：双核配合物Cu2(μ-OEt)2中金属离子Cu^2 与载体SiO2表面O^2-以双齿配位键合，配体以桥基形式连接双金属离子形成双核物种Cu2(μ-OEt)2；CO2在催化剂表面存在桥式和乙氧碳酸酯基两种吸附态，其中乙氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态．催化剂用量、反应压力、反应温度和反应时间对甲醇的转化率都有不同程度的影响，在超临界条件下，DMC的选择性为100％，甲醇的转化率超过4％．     

Ni2(OCH3)2/SiO2催化剂上CO2和CH3 OH的吸附和反应性能

采用表面改性和离子交换相结合的方法制备了Ni2(OCH3)2/SiO2负载型双核金属甲氧基配合物催化剂,利用红外光谱(IR)、程序升温脱附(TPD)、程序升温表面反应(TPSR)和微反技术考察了催化剂的表面结构以及CO2和CH3OH的化学吸附和反应性能.结果表明:Ni2(OCH3)2/SiO2中Ni2+与载体SiO2表面O2-以双齿配位形式键合,甲氧基以桥基形式联结双金属离子形成双核物种Ni2(OCH3)2;CO2在催化剂表面存在甲氧碳酸酯基物种和桥式两种吸附态,CH3OH则只有一种分子吸附态;在100～200℃条件下,CO2和CH3OH在催化剂上的反应产物主要是DMC和H2O;根据反应结果,讨论了催化反应机理.     

Ti2(OMe)4/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换法制备了SiO2负载的Ti2(OMe)4双核桥联配合物催化剂，用IR、TPD和微反技术考察了催化剂的表面构造及CO2和CH3OH在催化剂表面上的化学吸附和反应性能。结果表明：双核桥联配合物Ti2(OMe)4以Ti-O-Si键锚定在SiO2表面上；CO2在催化剂表面存在桥式和甲氧碳酸酯基两种吸附态，其中甲氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态。在150℃以下，CO2和CH3OH在Ti2(OMe)4/SiO2催化剂表面上高选择地生成碳酸二甲酯。     

K2O助剂对合成碳酸二甲酯用Cu/Ni/ZrO2-SiO2催化剂的吸附和催化性能的影响

 用等体积浸渍法制备了ZrO2－SiO2（ZrSiO）表面复合氧化物负载的Cu－Ni催化剂,并用IR,TPR,TPD及微反技术考察了K2O助剂对CO2和CH3OH在Cu－Ni／ZrSiO催化剂表面上的吸附及合成碳酸二甲酯（DMC）反应性能的影响．结果表明：加入K2O助剂使CO2在催化剂表面上的吸附增强,当n（K）／n（Cu＋Ni）＝15％时,CO2在催化剂表面上吸附后生成K2CO3;CH3OH在催化剂表面上的解离吸附态（CH3O－和H＋）的吸附减弱;CO2和CH3OH在Cu－Ni／ZrSiO催化剂表面上反应的主要产物为DMC,H2O,CO和CH2O;随着K2O助剂的加入,反应转化率及DMC选择性提高,副产物（CO和CH2O）的选择性下降．根据实验结果,探讨了K2O对催化剂表面活性中心电荷分布的影响．     

负载型Sn2(OMe)2Cl2/SiO2催化剂的制备、表征与催化合成碳酸二甲酯

采用表面改性法制备了负载型Sn2(OMe)2Cl2/SiO2双核桥联配合物催化剂,用IR,TPD和微量反应技术研究了催化剂的表面结构、化学吸附性能和反应活性.结果表明,双核桥联配合物Sn2(OMe)2Cl2以O(Me)为桥,Cl为配体,并以Sn-O-Si形式键合到SiO2表面上;CO2与催化剂表面的金属离子Sn4+和桥基配体OMe的O2-形成桥式和甲氧碳酸酯基两种吸附态,CH3OH与催化剂表面的金属离子Sn4+仅形成一种分子吸附态;在413K以下,CO2和CH3OH在Sn2(OMe)2Cl2/SiO2催化剂表面上以近100%的选择性生成碳酸二甲酯;CO2在催化剂表面形成的甲氧碳酸酯基吸附态是生成DMC的关键物种,其与在同一活性中心的分子吸附态甲醇的反应决定了催化剂的活性和产物选择性.     

CO2和CH3OH直接合成碳酸二甲酯用Cu-Ni/ZrO2-SiO2催化剂

 采用表面反应改性法制备了ZrO2－SiO2（ZrSiO）表面复合物,用等体积浸渍法制备了ZrSiO担载的Cu－Ni双金属催化剂,并用IR,TPD,TPSR和微反技术考察了CO2和CH3OH在催化剂表面上的化学吸附及反应性能．实验结果表明：在Cu－Ni／ZrSiO催化剂上存在着Cu－Ni金属位M,Lewis酸位Zrn＋和Lewis碱位Zr－O－三类活性中心;CO2在金属位和Lewis酸位的协同作用下可形成CO2卧式吸附态,此吸附态在142℃左右可解离成M－CO和Zr－O－;CH3OH在Lewis酸位和Lewis碱位的协同作用下可形成解离吸附态Zr－OCH3和Zr－OH;CO2和CH3OH在Cu－Ni／ZrSiO催化剂表面上的主要反应产物为碳酸二甲酯（选择性在85％以上）,另有少量的CH2O,CO和H2O．     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.