超细纳米Pd粒子与聚乙烯吡咯烷酮的相互作用

在微量聚乙烯吡咯烷酮(PVP)存在下, 利用超声还原氯化钯水溶液, 制备出超细纳米Pd颗粒, 用高分辨透射电镜、红外光谱、紫外-可见光谱和X射线光电子能谱等技术对其表面形貌及结构进行了表征. 结果表明, 纳米Pd粒子的粒径均一, 大约为3 nm. 纳米Pd/PVP复合粉末的羰基红外吸收峰比PVP的羰基吸收峰红移9 cm^-1; 且当超声反应50 min时, PVP紫外吸收波峰蓝移16 nm, 表明了纳米Pd与PVP之间存在一定的相互作用力. XPS结果证明, 纳米Pd与PVP的羰基基团通过配位作用使超细纳米Pd粒子得以稳定分散存在.     

二氧化钛/聚乙烯吡咯烷酮纳米复合薄膜的制备与表征

采用溶胶-凝胶法(so1 gel)制备了TiO2/聚乙烯吡咯烷酮(PVP)有机 无机纳米复合薄膜.采用扫描电子显微镜、接触角测定仪、红外光谱仪、紫外 可见吸收光谱仪和静 动摩擦系数测定仪对所制备的TiO2/PVP纳米复合薄膜进行了结构表征和性能研究.结果表明:所制备的TiO2/PVP纳米复合薄膜表面平整光滑、无裂纹、具有一定的疏水性、良好的透明性、防紫外线性能和减摩抗磨性能.     

溶剂热法制备六角锥形ZnO及其光致发光性能

通过乙酸锌和醇溶液反应得到了六角锥形纳米ZnO颗粒, 反应过程中不使用碱溶液和表面活性剂. 利用透射电子显微镜(TEM)、选区电子衍射(SAED)及扫描电子显微镜(SEM)对其形貌和结构进行了表征分析. 结果表明, 此方法制备的ZnO颗粒为单晶, 而且六角锥形ZnO的室温光致发光谱(PL)在378 nm处显示出了单纯的紫外发射峰, 而不是通常报道的可见光区发射, 这也预示着这种特殊结构的纳米ZnO将会成为一种具有良好应用前景的光学材料.     

胃蛋白酶对CdTe纳米粒子的表面修饰及分析应用

以巯基乙酸为稳定剂和表面修饰剂, 在有机相中合成了平均粒径为3 nm左右的CdTe纳米粒子, 用胃蛋白酶改变纳米粒子的表面修饰状态并研究其系列特性. CdTe纳米粒子在320 nm处有强的紫外吸收, 在524.8 nm处有荧光发射. 经胃蛋白酶对其表面修饰后, 紫外吸收峰位不变, 但吸光强度升高, 荧光峰位蓝移至467.2 nm, 荧光强度降低. 温度、pH值及离子强度均对表面修饰产生影响. 在最佳实验条件下, 胃蛋白酶质量浓度在4—40 mg/L范围内与荧光降低值之间呈线性关系, 检测限(3σ)为0.28 mg/L(n=10), 该方法已被用于人体胃液胃蛋白酶的测定.     

链霉亲和素-异硫氰酸荧光素偶联核壳型Fe_3O_4/Au纳米晶的合成及性质

采用改进的Polyol合成法,以PEO-PPO-PEO为表面活性剂制备了链霉亲和素-异硫氰酸荧光素偶联的Fe3O4/Au纳米粒子;利用透射电镜和X射线衍射仪分析证实了Fe3O4/Au的核壳型纳米结构,确定了其粒径和分布;采用紫外-可见吸收光谱仪和荧光光谱仪测定了所制备的纳米粒子的光学活性和荧光特性,并采用振动样品磁强计(VSM)测量了其磁化率.结果表明,所制备的Fe3O4/Au纳米粒子具有光学活性和荧光特性,以及优异的磁性.     

金核银壳纳米粒子薄膜的制备及SERS活性研究

采用柠檬酸化学还原法制备金溶胶, 通过自组装技术在石英片表面制备金纳米粒子薄膜, 在银增强剂混合溶液中反应获得金核银壳纳米粒子薄膜. 用紫外-可见吸收光谱仪和原子力显微镜(AFM)研究了不同条件下制备的金核银壳纳米粒子薄膜的光谱特性和表面形貌, 并以结晶紫为探针分子测量了金核银壳纳米粒子薄膜的表面增强拉曼光谱(SERS). 结果表明, 金纳米粒子薄膜的分布、银增强剂反应时间的长短对金核银壳纳米粒子薄膜的形成均有重要影响. 制备过程中, 可以通过控制反应条件获得一定粒径的、具有良好表面增强拉曼散射活性的金核银壳纳米粒子薄膜.     

水溶性银纳米颗粒的制备及抗菌性能

采用液相还原法, 以单宁酸为还原剂, 聚乙烯吡咯烷酮(PVP)为修饰剂制备出了水溶性的表面修饰Ag纳米颗粒. 通过X 射线粉末衍射仪(XRD)、透射电子显微镜(TEM)、紫外-可见吸收分光光度计(UV-Vis)、傅里叶变换红外(FTIR)光谱仪等对所得样品的形貌和结构进行了表征. 采用肉汤稀释法测试了样品的抗菌性能, 考察了样品在水相中的分散稳定性, 提出了PVP修饰Ag纳米颗粒的形成机理. 结果表明所制备的样品具有Ag的面心立方晶体结构, 平均粒径为15-17 nm. 样品在水相中能长时间稳定分散; 对埃希氏大肠杆菌(E. coli)、金黄色葡萄球菌(S. aureus)具有明显的抗菌作用. 操作简便、条件温和的制备方法易于在工业规模上放大; 试剂无毒, 使得所制备的PVP修饰Ag纳米颗粒作为抗菌剂具有良好的应用前景.     

纳米ZnO对白僵菌孢子的紫外保护及与孢子的生物相容性

用沉淀法制备经油酸表面修饰的纳米ZnO,测定其紫外吸收性能及对油悬浮剂型白僵菌孢子的抗紫外保护效率;用扫描电子显微镜观察纳米ZnO与孢子的混合状态,通过对含纳米ZnO的白僵菌制剂在贮存期间孢子萌发率差异显著性的分析,确定其与白僵菌孢子的生物相容性.结果表明：制备的纳米ZnO的平均粒径为27nm,其对波长200nm～370nm范围的紫外光具有良好的吸收性能.含纳米ZnO质量分数为1.0%、2.0%和5.0%的油悬浮剂型白僵菌,紫外灯照射8h,对孢子保护效率均大于60%,不含纳米ZnO为9.7％. 纳米ZnO被吸附包覆于孢子表面,屏蔽紫外线,保护孢子免受紫外线的杀伤.含0.5%、1.0%和2.0%纳米ZnO的油悬浮剂型白僵菌制剂室温贮存10个月,其孢子萌发率与不含纳米ZnO的差异不显著;纳米ZnO与白僵菌孢子生物相容性好.油悬浮剂型白僵菌制剂中纳米ZnO的适宜含量为1.0%～2.0%.     

液相沉积法制备ZnO/CdS复合纳米棒阵列薄膜及其光电性质

采用两步化学溶液沉积法在氧化铟锡(ITO)导电玻璃衬底上制备了ZnO/CdS复合纳米棒阵列薄膜.利用X射线衍射(XRD)仪、扫描电子显微镜(SEM)、紫外-可见(UV-Vis)吸收分光光度计、荧光(PL)光谱仪及表面光电压谱(SPS)研究了不同CdS沉积时间对复合薄膜的晶体结构、形貌、光电性质的影响.研究结果表明:ZnO纳米棒阵列表面包覆CdS纳米颗粒后,其吸收光谱可拓展到可见光区;与吸收光谱相对应在可见光区出现新的光电压谱响应区,这一现象证实,通过与CdS复合可显著提高ZnO纳米棒阵列在可见光区的光电转换性能;随着CdS纳米颗粒沉积时间的延长,复合纳米棒阵列薄膜在大于383nm波长区域的光电压强度逐渐减弱,而在小于383nm波长区域的光电压强度逐渐增强.用两种不同的电荷产生和分离机制对这一截然相反的光响应过程进行了详细的讨论和解释.     

多功能NiFeAu纳米粒子的合成与表征

采用一罐纳米乳液法,以聚乙二醇-聚丙二醇-聚乙二醇(PEO-PPO-PEO)三嵌段共聚物为表面活性剂,通过还原前驱体乙酰丙酮镍、乙酰丙酮铁(Ⅱ)和醋酸金,成功制备了NiFeAu纳米粒子.采用透射电镜和X射线衍射仪分析了NiFeAu纳米粒子的形貌和结构;采用傅立叶变换红外光谱仪分析了三嵌段共聚物在NiFeAu纳米颗粒表面的覆盖情况;采用紫外-可见吸收光谱仪和振动样品磁强计测试了纳米粒子的光学和磁学特性.结果表明,三嵌段共聚物成功地结合于NiFeAu纳米颗粒表面;所制备的纳米粒子粒径分布较窄、结晶性能良好,并兼具光学和磁学特性.     

聚乙烯吡咯烷酮包裹核壳型Fe_3O_4/Au纳米粒子的制备

采用改进的Polyol合成法,以聚乙烯吡咯烷酮（PVP）为表面活性剂制备PVP包裹的单分散的Fe3O4/Au纳米粒子.透射电镜（TEM）和X射线衍射（XRD）分析证实了Fe3O4/Au的核壳型纳米结构,并确定了纳米粒子的尺寸大小和分布.UV-Vis测定显示了所制备的纳米粒子具有光学活性,而振动样品磁强计（VSM）测量显示纳米粒子具有优异的磁化率.     

纳米银催化氧化偶联硫醇制二硫化物

采用多元醇为溶剂和还原剂制备了聚乙烯吡咯烷酮(PVP)保护的纳米银,并将其用于催化正十二烷基硫醇氧化偶联反应.质谱、红外光谱、拉曼光谱和核磁共振氢谱表征结果表明所得产物为二硫化物.考察了反应时间、反应温度、催化剂和水的用量等对正十二烷基硫醇氧化偶联反应的影响,从而得出优化的反应条件:0.157mmolPVP保护的纳米银,20μl水,100℃下反应3h.此外,进一步将PVP保护的纳米银用于正丁硫醇和正辛硫醇的氧化偶联反应,也得到了相应的二硫化物.     

聚乙烯吡咯烷酮/四氧化三铁复合纳米纤维的制备与表征

采用静电纺丝方法制备了聚乙烯吡咯烷酮/四氧化三铁复合纳米纤维, 并用透射电子显微镜(TEM)、X射线衍射(XRD)、热失重分析(TGA)和振动磁力分析进行了表征, 探讨了复合物的结构及其性能.     

Silver nanoparticles stabilized by crosslinked poly(vinyl pyrrolidone) and its application for facilitated olefin transport

Positively polarized silver nanoparticles by poly(vinyl pyrrolidone) (PVP) have been demonstrated for use as stable olefin carriers for facilitated olefin transport membranes. The formation and size of silver nanoparticles stabilized by PVP were monitored using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Nanocomposite membranes consisting of polymer and silver nanoparticles stabilized by PVP exhibited the high separation performance for olefin/paraffin mixtures. X-ray photoelectron spectroscopy (XPS) showed that silver nanoparticles stabilized by PVP exhibited a high positive polarity, resulting in the reversible interaction between the surface of silver nanoparticles and olefin molecules.     

溶剂热法制备银纳米晶

以聚乙烯吡咯烷酮(PVP)作为表面活性剂,利用乙二醇溶剂热法成功制备了银纳米颗粒;利用场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)分析了样品的形貌和晶体结构,并考察了溶剂组成等因素对银纳米颗粒形貌的影响.研究结果表明所得银纳米晶粒径均一,直径约为90nm;增大PVP的加入量会降低产物的粒径,溶剂中水的引入会影响银纳米晶的形貌.     

Bimetallic PdAu nanoparticles as hydrogenation catalysts in imidazolium ionic liquids

Metallic and bimetallic PdAu nanoparticles were solubilized in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (IL) by a phase-transfer method using poly(vinylpyrrolidone) (PVP) as a stabilizer. Nanoparticles were characterized by UV–vis spectroscopy and transmission electron microscopy. The bimetallic PdAu nanoparticles in the IL-phase were examined as catalysts for hydrogenation reactions; both the activity and selectivity of the hydrogenation reactions could be tuned by varying the composition of the bimetallic nanoparticles, with maximum activities seen at 1:3 Au:Pd ratios. These nanoparticles/IL catalysts were recycled and then reused for further catalytic reactions with minimal loss in activity.     

Laser-induced silver nanocrystal formation in polyvinylpyrrolidone solutions

We report unusual laser-induced shape conversions of silver nanoparticles dispersed in polyvinylpyrrolidone (PVP) aqueous solutions. Silver nanocrystals such as nanoplates and nanorods were formed using laser irradiation for colloidal silver nanoparticles prepared using laser ablation in aqueous solutions of PVP. Differing from the nanocrystal formation observed in neat water and halide solutions, which were induced by weak laser or fluorescent-light irradiation, the nanocrystal formation in PVP solutions was induced by strong laser irradiation. On the other hand, nanocrystal formation was not observed in polyvinylalcohol (PVA) solutions, in which fusion of nanoparticles were prominent. It is proposed that the nanocrystals were formed from fragmented nanoparticles protected by PVP via a ripening process.     

Poly(N‐vinylpyrrolidone)‐Decorated Reduced Graphene Oxide with ZnO Grown In Situ as a Cathode Buffer Layer for Polymer Solar Cells

A ZnO@reduced graphene oxide–poly(N‐vinylpyrrolidone) (ZnO@RGO‐PVP) nanocomposite, prepared by in situ growth of ZnO nanoparticles on PVP‐decorated RGO (RGO‐PVP) was developed as a cathode buffer layer for improving the performance of polymer solar cells (PSCs). PVP not only favors homogeneous distribution of the RGO through the strong π–π interactions between graphene and PVP molecules, but also acts as a stabilizer and bridge to control the in situ growth of sol–gel‐derived ZnO nanoparticles on the surface of the graphene. At the same time, RGO provides a conductive connection for independent dispersion of ZnO nanoparticles to form uniform nanoclusters with fewer domain boundaries and surface traps. Moreover, the LUMO level of ZnO is effectively improved by modification with RGO‐PVP. Compared to bare ZnO, a ZnO@RGO‐PVP cathode buffer layer substantially reduces the recombination of carriers, increases the electrical conductivity, and enhances electron extraction. Consequently, the power conversion efficiency of an inverted device based on thieno[3,4‐b]thiophene/benzodithiophene (PTB7):[6,6]‐phenyl C₇₁‐butyric acid methyl ester (PC₇₁BM) with ZnO@RGO‐PVP as cathode buffer layer was greatly improved to 7.5 % with improved long‐term stability. The results reveal that ZnO@RGO‐PVP is universally applicable as a cathode buffer layer for improving the performance of PSCs.     

Synthesis and characterizations of various polyvinyl pyrrolidon/hydroxyl ethyl methacrylate nanocomposite hydrogels as drug delivery systems

Using polymer hydrogels and nanocomposites hydrogels still promising materials for many applications. Polyvinyl pyrrolidone (PVP) has been used with various polymers synthetic and natural for different applications. In this study PVP and hydroxyl ethyl methacrylate (HEMA) copolymer hydrogels were prepared by the aid of gamma radiation and the PVP/HEMA nanocomposite hydrogels were obtained by in situ adsorption and reduction method of iron salts and silver nitrates (AgNO₃) to form PVP/HEMA-Fe₃O₄ and PVP/HEMA-Ag nanocomposites. The prepared hydrogels and the formed nanoparticles were studied by various techniques; FTIR, TEM, SEM and also the gel content and swelling behavior were evaluated. The prepared hydrogels and nanocomposites hydrogels were examined as drug delivery systems for Ciprofloxacin HCl as model drug. The PVP/HEMA-Fe₃O₄ nanocomposite gave the suitable load and release behavior towards Ciprofloxacin HCl.