Dual‐Mesoporous ZSM‐5 Zeolite with Highly b‐Axis‐Oriented Large Mesopore Channels for the Production of Benzoin Ethyl Ether

Dual‐mesoporous ZSM‐5 zeolite with highly b axis oriented large mesopores was synthesized by using nonionic copolymer F127 and cationic surfactant CTAB as co‐templates. The product contains two types of mesopores—smaller wormlike ones of 3.3 nm in size and highly oriented larger ones of 30–50 nm in diameter along the b axis—and both of them interpenetrate throughout the zeolite crystals and interconnect with zeolite microporosity. The dual‐mesoporous zeolite exhibits excellent catalytic performance in the condensation of benzaldehyde with ethanol and greater than 99 % selectivity for benzoin ethyl ether at room temperature, which can be ascribed to the zeolite lattice structure offering catalytically active sites and the hierarchical and oriented mesoporous structure providing fast access of reactants to these sites in the catalytic reaction. The excellent recyclability and high catalytic stability of the catalyst suggest prospective applications of such unique mesoporous zeolites in the chemical industry.     

Taguchi Optimization for Combustion Synthesis of Aluminum Oxide Nano-particles

Nano-structured aluminum oxide powders were prepared by a combustion synthesis method utilizing serine as a new fuel. The product was sonicated to obtain nano powders. A Taguchi L-4 statistical design of combustion synthesis was utilized to optimize the production of γ-alumina powder. The product was characterized by XRD, BET, SEM, EDX and LLS. Nano crystalline γ-alumina with crystal sizes between 4.26 and 5.47 nm and α-Al2O3 powders with crystal sizes 24.51 and 28.62 nm were obtained by the combustion synthesis. The specific surface area was measured by a BET method to be 75.21 m2/g. The average particle size after sonication of product, observed by LLS, was 79.32 nm.     

Selective Transformation of Syngas into Gasoline‐Range Hydrocarbons over Mesoporous H‐ZSM‐5‐Supported Cobalt Nanoparticles

Bifunctional Fischer–Tropsch (FT) catalysts that couple uniform‐sized Co nanoparticles for CO hydrogenation and mesoporous zeolites for hydrocracking/isomerization reactions were found to be promising for the direct production of gasoline‐range (C_5–11) hydrocarbons from syngas. The Brønsted acidity results in hydrocracking/isomerization of the heavier hydrocarbons formed on Co nanoparticles, while the mesoporosity contributes to suppressing the formation of lighter (C_1–4) hydrocarbons. The selectivity for C_5–11 hydrocarbons could reach about 70 % with a ratio of isoparaffins to n‐paraffins of approximately 2.3 over this catalyst, and the former is markedly higher than the maximum value (ca. 45 %) expected from the Anderson–Schulz–Flory distribution. By using n‐hexadecane as a model compound, it was clarified that both the acidity and mesoporosity play key roles in controlling the hydrocracking reactions and thus contribute to the improved product selectivity in FT synthesis.     

多级孔ZSM-5负载的钴催化剂的费-托合成催化性能

采用水蒸气辅助转晶(SAC)法合成了粒径均一(180 nm)的纳米ZSM-5颗粒,颗粒间堆积形成大量的开放介孔,与ZSM-5的微孔共同形成多级孔结构。以该材料为载体采用满孔浸渍法制备了负载量为15%(质量分数)的钴催化剂。采用XRD、SEM、TEM、N_2物理吸附-脱附等表征技术对多级孔ZSM-5载体及其负载催化剂的形貌和结构进行了表征,并对催化剂的费-托合成催化性能进行了测试。结果表明,相比于大颗粒的ZSM-5和商业ZSM-5,多级孔ZSM-5负载的钴催化剂的费-托合成活性最高,CH_4选择性最低,C_(5-20)产物的选择性高达68.9%,这归因于多级孔ZSM-5的介孔孔道有效地促进反应过程中产物的传质扩散以及ZSM-5微孔骨架上的酸中心促进了长链烃产物的二次加氢裂解。     

Effect of the pore size of Co/SBA-15 isomorphically substituted with zirconium on its catalytic performance in Fischer-Tropsch synthesis

Cobalt catalysts supported on a series of mesoporous SBA-15 materials isomorphically substituted with zirconium (Zr/Si atomic ratio = 1/20) with different pore sizes (5.7 nm, 7.8 nm, 11.6 nm, 17.6 nm) have been synthesized. The catalysts were characterized by transmission electron microscopy, ²⁹Si solid state magic angle spinning (MAS) NMR, N₂ adsorption-desorption measurements, X-ray powder diffraction, X-ray photoelectron spectroscopy, H₂-temperature programmed reduction, H₂-temperature programmed desorption and O₂ titrations. The results indicated that larger pore size led to weaker interactions between cobalt and the supports which lowered the temperature of both reduction steps (Co₃O₄→CoO and CoO→Co⁰). The catalytic performances of the catalysts in Fischer-Tropsch synthesis (FTS) were tested in a fixed bed reactor. It was found that the FTS catalytic activity and product selectivity depended strongly on the pore size of the catalysts. The catalyst with a pore size of 7.8 nm showed the best FTS activity, and the catalyst with a pore size of 17.6 nm showed the highest selectivity to C₁₂–C₂₀ and C₂₀₊ hydrocarbons.     

Synthesis of Hierarchical Macro‐/Mesoporous Solid‐Solution Photocatalysts by a Polymerization–Carbonization–Oxidation Route: The Case of Ce0.49Zr0.37Bi0.14O1.93

A hierarchical macro‐/mesoporous Ce_0.49Zr_0.37Bi_0.14O_1.93 solid‐solution network has been synthesized on a large scale by means of a simple and general polymerization–carbonization–oxidation synthetic route. The as‐prepared product has been characterized by SEM, XRD, TEM, BET surface area measurement, UV/Vis diffuse‐reflectance spectroscopy, energy‐dispersive X‐ray spectroscopy (EDS), and photoelectrochemistry measurements. The photocatalytic activity of the product has been demonstrated through the photocatalytic degradation of methyl orange. Structural characterization has indicated that the hierarchical macro‐/mesoporous solid‐solution network not only contains numerous macropores, but also possesses an interior mesoporous structure. The mesopore size and BET surface area of the network have been measured as 2–25 nm and 140.5 m² g^?1, respectively. The hierarchical macro‐/mesoporous solid‐solution network with open and accessible pores was found to be well‐preserved after calcination at 800 °C, indicating especially high thermal stability. Due to its high specific surface area, the synergistic effect of the coupling of macropores and mesopores, and its high crystallinity, the Ce_0.49Zr_0.37Bi_0.14O_1.93 solid‐solution material shows a strong structure‐induced enhancement of visible‐light harvest and exhibits significantly improved visible‐light photocatalytic activity in the photodegradation of methyl orange compared with those of its other forms, such as mesoporous hollow spheres and bulk particles.     

Growth of Single‐Layered Two‐Dimensional Mesoporous Polymer/Carbon Films by Self‐Assembly of Monomicelles at the Interfaces of Various Substrates

Single‐layered two‐dimensional (2D) ultrathin mesoporous polymer/carbon films are grown by self‐assembly of monomicelles at the interfaces of various substrates, which is a general and common modification strategy. These unconventional 2D mesoporous films possess only a single layer of mesopores, while the size of the thin films can grow up to inch size in the plane. Free‐standing transparent mesoporous carbon ultrathin films, together with the ordered mesoporous structure on the substrates of different compositions (e.g. metal oxides, carbon) and morphologies (e.g. nanocubes, nanodiscs, flexible and patterned substrates) have been obtained. This strategy not only affords controllable hierarchical porous nanostructures, but also appends the easily modified and multifunctional properties of carbon to the primary substrate. By using this method, we have fabricated Fe₂O₃–mesoporous carbon photoelectrochemical biosensors, which show excellent sensitivity and selectivity for glutathione.     

Fabrication of SAPO‐34 with Tuned Mesopore Structure

Crystalline SAPO‐34 molecular sieves with hierarchical network were synthesized employing polyethylene glycol (PEG) as the meso‐generating agent via a self‐assembly strategy. XRD, FESEM, N₂ adsorption‐desorption and FT‐IR spectroscopic analyses showed that PEG co‐template has a decisive role in tailoring the pore structure and producing a tuned structure from microporous towards the mesoporous structure. Also, addition of PEG favored the formation of more uniform and smaller crystals than the conventional SAPO‐34. In fact, PEG did not only control the size of crystals due to its crystal growth inhibiting (CGI) effect but also modified the morphology of the crystals and improved CSD (crystal size distribution) along with induction of mesopores into the porous structure. The modified SAPO‐34 would be recommended for selective formation of light olefins through the acid‐catalyzed reactions, such as the conversion of methanol to olefins/propylene (MTO/MTP) and propane dehydrogenation (PDH) to produce olefins with higher selectivity and catalyst stability than the conventional SAPO‐34.     

Effect of catalyst confinement and pore size on Fischer-Tropsch synthesis over cobalt supported on carbon nanotubes

This paper studies the impact of structure of cobalt catalysts supported on carbon nanotubes(CNT) on the activity and product selectivity of Fischer-Tropsch synthesis(FTS) reaction.Three types of CNT with average pore sizes of 5,11,and 17 nm were used as the supports.The catalysts were prepared by selectively impregnating cobalt nanoparticles either inside or outside CNT.The TPR results indicated that the catalyst with Co particles inside CNT was easier to be reduced than those outside CNT,and the reducibility of cobalt oxide particles inside the CNT decreased with the cobalt oxide particle size increasing.The activity of the catalyst with Co inside CNT was higher than that of catalysts with Co particles outside CNT.Smaller CNT pore size also appears to enhance the catalyst reduction and FTS activity due to the little interaction between cobalt oxide with carbon and the enhanced electron shift on the non-planar carbon tube surface.     

Controlled post‐synthesis grafting of thermoresponsive poly(N‐isopropylacrylamide) on mesoporous silica nanoparticles

Ordered mesoporous silica nanoparticles with pore diameter of 5 nm were synthesized by modification of the sol‐gel synthesis method. Post‐synthesis two‐step grafting of thermoresponsive poly(N‐isopropylacrylamide) inside the mesopores of the nanoparticles was carried out by distillation–precipitation polymerization of the methacryloxy‐functionalized mesoporous nanoparticles with N‐isopropylacrylamide monomer. A precise control on the quantity of the grafted polymer was achieved by changing the ratio of monomer to methacryloxy‐functionalized nanoparticles. The polymer‐grafted hybrid nanoparticles obtained were fully characterized by infrared spectroscopy, X‐ray diffraction, dynamic light scattering, transmission electron microscopy, thermal, and gas‐volumetric analyses, which clearly showed presence and thermoresponsive behavior of the polymer inside the mesopores with the preservation of the characteristic mesoporous structure of the nanoparticles. Copyright © 2015 John Wiley & Sons, Ltd.     

Photocatalytic Degradation of Imidacloprid by Phosphotungstic Acid Supported on a Mesoporous Sieve MCM‐41

Solid catalysts consisting of polyoxometalates (POM) namely phosphotungstic acid H₃PW₁₂O₄₀ (HPW) supported on a mesoporous sieve MCM‐41 have been prepared and characterized by FT‐IR, X‐ray diffraction, nitrogen adsorption and high resolution transmission electron microscope (HRTEM). The HPW/MCM‐41 with different HPW loadings from 10 to 60 wt% possess large specific surface area and rather uniform mesopores. Keggin structure of HPW retains on the prepared composite catalysts. The photocatalytic performance of HPW/MCM‐41 was examined by degradation of a durable pesticide imidacloprid. It is found that the prepared photocatalysts exhibit high activity under irradiation of 365 nm monochromatic light. For 50 mL of imidacloprid (10 mg/L), conversion of imidacloprid using 20 mg of HPW/MCM‐41 with 50 wt% loading level and calcined at 300°C reaches 58.0% after 5 h irradiation.     

Synthesis of Nitrogen‐Doped Mesoporous Carbon Spheres with Extra‐Large Pores through Assembly of Diblock Copolymer Micelles

The synthesis of highly nitrogen‐doped mesoporous carbon spheres (NMCS) is reported. The large pores of the NMCS were obtained through self‐polymerization of dopamine (DA) and spontaneous co‐assembly of diblock copolymer micelles. The resultant narrowly dispersed NMCS possess large mesopores (ca. 16 nm) and small particle sizes (ca. 200 nm). The large pores and small dimensions of the N‐heteroatom‐doped carbon spheres contribute to the mass transportation by reducing and smoothing the diffusion pathways, leading to high electrocatalytic activity.     

Mesoporous inorganic salts with crystal defects: unusual catalysts and catalyst supports

We proposed a strategy to synthesize mesoporous inorganic salt particles using the special properties of ionic liquid (IL) mixtures, and hollow mesoporous LaF₃, NdF₃, and YF₃ particles were synthesized and characterized using different techniques. The size of the mesopores in the salt particles was about 4 nm, and the materials were full of crystal defects. The LaF₃, NdF₃ and YF₃ particles were used as the catalysts for the cyanosilylation reaction of benzaldehyde using trimethylsilyl cyanide, and Ru/LaF₃ and Ru/NdF₃, in which Ru nanocatalysts were supported on the LaF₃ and NdF₃ particles with mesopores, were used to catalyze hydrogenations of benzene to cyclohexane and levulinic acid (LA) to γ-valerolactone (GVL). It was discovered that the activities of these catalysts were unprecedentedly high for these reactions. Detailed study showed that both the crystal defects and the mesopores in the salt particles played crucial roles for the extremely high catalytic activity.     

Hydrolytic Transformation of Microporous Metal–Organic Frameworks to Hierarchical Micro‐ and Mesoporous MOFs

A new approach to the synthesis of hierarchical micro‐ and mesoporous MOFs from microporous MOFs involves a simple hydrolytic post‐synthetic procedure. As a proof of concept, a new microporous MOF, POST‐66(Y), was synthesized and its transformation into a hierarchical micro‐ and mesoporous MOF by water treatment was studied. This method produced mesopores in the range of 3 to 20 nm in the MOF while maintaining the original microporous structure, at least in part. The degree of micro‐ and mesoporosity can be controlled by adjusting the time and temperature of hydrolysis. The resulting hierarchical porous MOF, POST‐66(Y)‐wt, can be utilized to encapsulate nanometer‐sized guests such as proteins, and the enhanced stability and recyclability of an encapsulated enzyme is demonstrated.     

Synthesis of Continuous Mesoporous Alumina Films with Large‐Sized Cage‐Type Mesopores by Using Diblock Copolymers

Mesoporous alumina films with large‐sized cage‐type mesopores were prepared by using commercially available diblock copolymer (PS‐b‐PEO) and economic inorganic salt (AlCl₃) as aluminum source. The obtained mesopore sizes drastically expand from 35 nm to 80 nm when the amount of ethanol in the precursor solutions were controlled. More interestingly, under an optimized amount of ethanol as co‐solvent, there was no significant change of micelle morphology on the substrate, even though the relative amount of PS‐b‐PEO to alumina source was dramatically varied. When the amount of alumina precursor was decreased, the pore walls gradually became thinner, thereby improving pore connectivity. The ordered mesoporous alumina films obtained in this study exhibit high thermal stability up to 1000 °C, and their frameworks are successfully crystallized to γ‐alumina phase. This technique could also be applicable for creating other metal oxide thin films with large mesopores.     

Controlled Synthesis of N‐Doped Carbon Nanospheres with Tailored Mesopores through Self‐Assembly of Colloidal Silica

Limited strategies have been established to prepare monodisperse mesoporous carbon nanospheres (MCNs) with tailored pore sizes. In this work, a method is reported to synthesize MCNs by combining polymerization of aniline with co‐assembly of colloidal silica nanoparticles. The controlled self‐assembly behavior of colloidal silica enables the formation of uniform composite nanospheres and convenient modulation over mesopores. After carbonization and removal of sacrificial templates, the resultant MCNs possess tunable mesopores (7–42 nm) and spherical diameters (90–300 nm), as well as high surface area (785–1117 m² g^?1), large pore volume (1.46–2.01 cm³ g^?1) and abundant nitrogen moieties (5.54–8.73 at %). When serving as metal‐free electrocatalysts for the oxygen reduction reaction (ORR), MCNs with an optimum pore size of 22 nm, compared to those with 7 and 42 nm, exhibit the best ORR performance in alkaline medium.     

Liquid Phase Hydrogenolysis of Biomass‐derived Lactate to 1,2‐Propanediol over Silica Supported Cobalt Nanocatalyst

Liquid phase hydrogenolysis of ethyl lactate to 1,2‐propanediol was performed over silica supporting cobalt catalysts prepared by two different methods: precipitation‐gel (PG) technique and deposition‐precipitation (DP) procedure. The cobalt species (Co₃O₄/cobalt phyllosilicate) present in the corresponding calcined PG and DP catalysts were different as a consequence of the preparation methods, and Co OH Co olation and Si O Co oxolation molecular mechanisms were employed to elucidate the chemical phenomena during the different preparation procedures. In addition, the texture (BET), reduction behavior (TPR and in‐situ XRD), surface dispersion and state of cobalt species (XPS), and catalytic performance differ greatly between the samples. Because of small particle size, high dispersion of cobalt species and facile reducibility, the Co/SiO₂ catalyst prepared by precipitation‐gel method presented a much higher activity than the catalyst prepared by deposition‐precipitation method. Metallic cobalt is assumed to be the catalytically active site for the hydrogenolysis reaction according to the catalytic results of both cobalt samples reduced at different temperatures and the structure changes after reaction.     

A Magnetically Separable Catalyst for Synthesis of 1‐Phenoxy‐2‐propanol Via Atom‐economic Reaction

A magnetically separable catalyst Al₂O₃‐MgO/Fe₃O₄ was prepared by Al₂O₃‐MgO supported on magnetic oxide Fe₃O₄ and charactered by FT‐IR, XRD and SEM. The mixed oxides afforded high catalytic activity and selectivity for synthesis of 1‐phenoxy‐2‐propanol from phenol and propylene oxide with 80.3% conversion and 88.1% selectivity to 1‐phenoxy‐2‐propanol. Especially, facile separation of the catalyst by a magnet was obtained and the catalytic performance of the recovered catalyst was unaffected even at the forth run.     

Ordered Mesoporous NiCeAl Containing Catalysts for Hydrogenolysis of Sorbitol to Glycols

Cellulose-derived sorbitol is emerging as a feasible and renewable feedstock for the production of value-added chemicals. Highly active and stable catalyst is essential for sorbitol hydrogenolysis. Ordered mesoporous M–xNiyCeAl catalysts with different loadings of nickel and cerium species were successfully synthesized via one-pot evaporation-induced self-assembly strategy (EISA) and their catalytic performance were tested in the hydrogenolysis of sorbitol. The physical chemical properties for the catalysts were characterized by XRD, N₂ physisorption, H₂-TPR, H₂ impulse chemisorption, ICP and TEM techniques. The results showed that the ordered mesopores with uniform pore sizes can be obtained and the Ni nanoparticles around 6 nm in size were homogeneously dispersed in the mesopore channels. A little amount of cerium species introduced would be beneficial to their textural properties resulting in higher Ni dispersion, metal area and smaller size of Ni nanoparticles. The M–10Ni2CeAl catalyst with Ni and Ce loading of 10.9 and 6.3 wt % shows better catalytic performance than other catalysts, and the yield of 1,2-PG and EG can reach 56.9% at 493 K and 6 MPa pressure for 8 h after repeating reactions for 12 times without obvious deterioration of physical and chemical properties. Ordered mesoporous M–NiCeAl catalysts are active and stable in sorbitol hydrogenolysis.