Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO–Au NPs) were obtained by the in situ reduction of GO and AuCl₄^?_(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O₂ through the transfer of SPR‐excited hot electrons to O₂ molecules adsorbed from air. The SPR‐mediated catalytic oxidation of p‐aminothiophenol (PATP) to p,p′‐dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR‐mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge‐transfer processes from rGO to Au took place and contributed to improved SPR‐mediated activity. Since the transfer of electrons from Au to adsorbed O₂ molecules is the crucial step for PATP oxidation, in addition to the SPR‐excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au‐to‐O₂ charge‐transfer process.     

Preparation of Nanoscrolls by Rolling up Graphene Oxide–Polydopamine–Au Sheets using Lyophilization Method

Graphene oxide–polydopamine–Au (GO–PDA–Au) nanoscrolls were prepared by rolling up GO–PDA–Au sheets through a simple lyophilization method. The structure of GO–PDA–Au nanoscrolls and GO–PDA–Au sheets were compared by powder X‐ray diffraction, Raman spectra, transmission electron microscopy, and scanning electron microscopy. The results demonstrated that the heterogeneous GO–PDA–Au nanoscrolls were synthesized successfully. Polydopamine (PDA) attached at the surface of GO sheets served as binding reagents to anchor and disperse Au nanoparticles (NPs). The electrocatalytic activity of methanol with GO–PDA–Au nanoscrolls and GO–PDA–Au sheets as electrodes were conducted. Compared to GO–PDA–Au sheets, GO–PDA–Au nanoscrolls showed better electrocatalytic activity and electrochemical stability owing to their scrolled structure. This article provides a simple and effective method to prepare GO nanoscrolls containing metal NPs that broadens the applications of the graphene‐based materials in optical, magnetic, and catalytic fields.     

Graphene oxide-based supramolecular hydrogels for making nanohybrid systems with Au nanoparticles

In the presence of a small amount of a proteinous amino acid (arginine/tryptophan/histidine) or a nucleoside (adenosine/guanosine/cytidine), graphene oxide (GO) forms supramolecular stable hydrogels. These hydrogels have been characterized by field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) analysis, Raman spectroscopy, and rheology. The morphology of the hydrogel reveals the presence of nanofibers and nanosheets. This suggests the supramolecular aggregation of GO in the presence of an amino acid/nucleoside. Rheological studies of arginine containing a GO-based hydrogel show a very high G' value (6.058 × 10(4) Pa), indicating the rigid, solid-like behavior of this gel. One of these hydrogels (GO-tryptophan) has been successfully utilized for the in situ synthesis and stabilization of Au nanoparticles (Au NPs) within the hydrogel matrix without the presence of any other external reducing and stabilizing agents to make Au NPs containing the GO-based nanohybrid material. The Au NPs containing the hybrid hydrogel has been characterized by using UV/vis spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). In this study, gold salt (Au(3+)) has been bioreduced by the tryptophan within the hydrogel. This is a facile "green chemical" method of preparing the GO-based nanohybrid material within the hydrogel matrix. The significance of this method is the in situ reduction of gold salt within the gel phase, and this helps to decorate the nascently formed Au NPs almost homogeneously and uniformly on the surface of the GO nanosheets within the gel matrix.     

Ultrastrong Chemiluminescence Activity of Nanocarbon Materials after Ozonation and Their Effects on Different Chemiluminescent Systems

Ozonized nanocarbon materials with different dimensionalities, structures, and components exhibited significantly different chemiluminescence (CL) activities. The ozonation time and the weight ratio of hydroxyl carbon nanotubes (d≈8 nm, hyCNTs‐8) and graphene oxide (GO) strongly affected the CL activity of ozonized hybrids. Among GO, hyCNTs‐8, and GO/hyCNTs‐8, the GO/hyCNTs‐8 hybrids exhibited the strongest CL‐enhancing properties toward the luminol/H₂O₂ system, in contrast to previous reports. This study provides new understanding of the CL activity and CL‐enhancing properties of nanocarbon materials in signal‐enhanced analytical and biomedical fields.     

Facile aqueous synthesis and stabilization of nearly monodispersed gold nanospheres by poly(L‐proline)

A facile strategy is developed to synthesize Au nanoparticles (Au‐NPs) using water‐soluble poly(L ‐proline) (PLP). The synthesized NPs were characterized by TEM, FTIR and NMR spectroscopy, thermogravimetric analysis, and circular dichroism. It was found that PLP has a “dual” role as an efficient reductant of Au(III) and simultaneously as a stabilizing agent of Au‐NPs. The influence of PLP molecular weight, temperature, initial Au(III) concentration, and Au(III)/PLP molar ratio on the size and dispersity of Au‐NPs is examined. It was found that the unique extended secondary structure of PLP II resulted in the facile formation of highly crystalline Au‐NPs in water at a very low Au(III)/PLP molar ratio. These Au‐NPs have the smallest dimensions and size distributions among NPs synthesized so far by polymeric materials in aqueous media, and exhibit enduring colloidal stability. Therefore, by utilizing biocompatible and benign materials in water, we managed to obtain Au‐NPs, so as the final product is ready‐to‐use for biomedical applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Controlling the Selectivity of the Surface Plasmon Resonance Mediated Oxidation of p‐Aminothiophenol on Au Nanoparticles by Charge Transfer from UV‐excited TiO2

Although catalytic processes mediated by surface plasmon resonance (SPR) excitation have emerged as a new frontier in catalysis, the selectivity of these processes remains poorly understood. Here, the selectivity of the SPR‐mediated oxidation of p‐aminothiophenol (PATP) employing Au NPs as catalysts was controlled by the choice of catalysts (Au or TiO₂‐Au NPs) and by the modulation of the charge transfer from UV‐excited TiO₂ to Au. When Au NPs were employed as catalyst, the SPR‐mediated oxidation of PATP yielded p,p‐dimercaptobenzene (DMAB). When TiO₂‐Au NPs were employed as catalysts under both UV illumination and SPR excitation, p‐nitrophenol (PNTP) was formed from PATP in a single step. Interestingly, PNTP molecules were further reduced to DMAB after the UV illumination was removed. Our data show that control over charge‐transfer processes may play an important role to tune activity, product formation, and selectivity in SPR‐mediated catalytic processes.     

Obtaining of hybrid nanocomposites by simultaneous photopolymerization of some urethane monomers and photoinduced formation of gold nanoparticles

Urethane–urea dimethacrylates were synthesized and used in the preparation of nanocomposites containing gold nanoparticles (Au NPs) in situ photogenerated during the UV‐curing process in the absence of reducing agent. A study of the photopolymerization kinetics showed that the photoreactivity of the monomers alone or in combination with a dual urethane benzophenone (BP) macromer is dependent on the nature of photoinitiator (Irgacure819, BP/amine) and the formulation composition. It was found that the addition of 1 wt % AuBr₃ in monomers slightly improved the polymerization rate and the degree of conversion. The formation of Au NPs into the network was confirmed through UV–vis, XRD, EDX, SAXS, and TEM analyses, the last indicating the existence of NPs with size around 8.5 nm and spherical/triangle shapes. On addition of 10 wt % 2[N‐methacryloyloxyethyl‐(N'‐2‐thioethyl)] (urea) in formulation, the Au NPs (200 nm) became predominantly cubic/hexagonal in shape. The composite films emit fluorescence at 575 nm, and this property could be exploited in the field of fluorescent bio/sensors. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 728–738     

Tailored Synthesis of Various Nanomaterials by Using a Graphene‐Oxide‐Based Gel as a Nanoreactor and Nanohybrid‐Catalyzed CC Bond Formation

New graphene oxide (GO)‐based hydrogels that contain vitamin B₂/B₁₂ and vitamin C (ascorbic acid) have been synthesized in water (at neutral pH value). These gel‐based soft materials have been used to synthesize various metal nanoparticles, including Au, Ag, and Pd nanoparticles, as well as nanoparticle‐containing reduced graphene oxide (RGO)‐based nanohybrid systems. This result indicates that GO‐based gels can be used as versatile reactors for the synthesis of different nanomaterials and hybrid systems on the nanoscale. Moreover, the RGO‐based nanohybrid hydrogel with Pd nanoparticles was used as an efficient catalyst for C? C bond‐formation reactions with good yields and showed high recyclability in Suzuki–Miyaura coupling reactions.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Optical and electronic properties of polyaniline sulfonic acid-ribonucleic acid-gold nanobiocomposites

Finely fibrillar polyaniline sulfonic acid (PSA)/ribonucleic acid (RNA) hybrids are developed by wrapping PSA with RNA from a mixture of aqueous PSA (P) and RNA (R) solutions of different compositions. FTIR spectra suggest H-bonding and π-π interactions in the hybrids and dedoping of self doped PSA during hybrid formation. UV-vis spectra exhibit a blue shift of the π-band to polaron band transition of PSA from 870 to 581 nm due to dedoping. The PR hybrids show enhanced PL-properties when excited at 540 nm relative to PSA which also exhibits rectification behavior in current (I)-voltage (V) curves. Gold nanoparticles (Au NPs) grown on these PR hybrids by the reduction of Au(3+) by PSA show different morphologies with varying composition. FTIR spectra of the nanobiocomposites indicate that Au NPs are stabilized by the co-ordination of the nitrogen atoms of -N=Q=N- bonds of PSA (Q = quinonoid ring). The intensity of the Au plasmon band gradually decreases with time but the PL-intensities of the PAu/PRAu nanocomposites increase with time. The PL-intensity of the nanocomposites is higher than that of PSA and PR hybrids. The DC-conductivity of the PR hybrids increases by an order of magnitude on addition of Au NPs. I-V curves of the nanobiocomposites show negative differential resistance (NDR) in PSA rich systems with a stable NDR ratio of 7 in the PRAu21 and PRAu11 hybrids. Possible reasons from the accumulation of charges on the Au NPs and its stabilization through the π-clouds of RNA bases are discussed. The PRAu11 system also exhibits rectification properties with a rectification ratio of 14.     

Preparation and characterization of polyvinyl alcohol/β‐cyclodextrin/GO‐Ag nanocomposite with improved antibacterial and strength properties

In this work, new hydrogel films based on polyvinyl alcohol (PVA) and β‐cyclodextrin (β‐CD) were prepared with the aim of studying their ability as an antibacterial and drug carrier system. Gallic acid (GA) was used as an antibacterial drug which was encapsulated into the β‐CD cavity, and finally, β‐CD inclusion complex (GA/βCD‐IC) was prepared. On the other hand, silver nanoparticles (AgNPs) were synthesized on the graphene oxide (GO) surface (GO‐Ag), and the obtained GO‐Ag was used to enhance the antibacterial properties and mechanical strength of their films. FT‐IR and DSC analysis approved the formation of cross‐linking with glutaraldehyde between the PVA and β‐CD. Hydrogel films were characterized using XRD and SEM. The disc diffusion method showed the antibacterial activity for the films containing GO‐Ag and GA. Due to the good strength, elasticity, WVP, and swelling ability, PVA/GA/βCD‐IC/GO‐Ag can be proposed as a potential antibacterial drug delivery system.     

General Strategy for Synthesis of Ordered Pt3M Intermetallics with Ultrasmall Particle Size

Controllable synthesis of atomically ordered intermetallic nanoparticles (NPs) is crucial to obtain superior electrocatalytic performance for fuel cell reactions, but still remains arduous. Herein, we demonstrate a novel and general hydrogel‐freeze drying strategy for the synthesis of reduced graphene oxide (rGO) supported Pt₃M (M=Mn, Cr, Fe, Co, etc.) intermetallic NPs (Pt₃M/rGO‐HF) with ultrasmall particle size (about 3 nm) and dramatic monodispersity. The formation of hydrogel prevents the aggregation of graphene oxide and significantly promotes their excellent dispersion, while a freeze‐drying can retain the hydrogel derived three‐dimensionally (3D) porous structure and immobilize the metal precursors with defined atomic ratio on GO support during solvent sublimation, which is not afforded by traditional oven drying. The subsequent annealing process produces rGO supported ultrasmall ordered Pt₃M intermetallic NPs (≈3 nm) due to confinement effect of 3D porous structure. Such Pt₃M intermetallic NPs exhibit the smallest particle size among the reported ordered Pt‐based intermetallic catalysts. A detailed study of the synthesis of ordered intermetallic Pt₃Mn/rGO catalyst is provided as an example of a generally applicable method. This study provides an economical and scalable route for the controlled synthesis of Pt‐based intermetallic catalysts, which can pave a way for the commercialization of fuel cell technologies.     

One‐Dimensional Carbon Nanotube/SnO2/Noble Metal Nanoparticle Hybrid Nanostructure: Synthesis,Characterization, and Electrochemical Sensing

Herein we report a facile and efficient method for self‐assembling noble‐metal nanoparticles (NPs) to the surface of SnO₂‐coated carbon nanotubes (CNT@SnO₂) to construct CNT@SnO₂/noble metal NP hybrids. By using SnCl₄ as the precursor of the SnO₂ shell on the surface of CNTs, the hydrolysis speed of SnCl₄ was slowed down in ethanol containing a trace amount of urea and water. The coaxial nanostructure of CNT@SnO₂ was confirmed by using X‐ray powder diffraction (XRD) and transmission electron microscopy (TEM). It was found that the coating layer of SnO₂ was homogeneous with the mean thickness of 8 nm. The CNT@SnO₂/noble‐metal NP hybrids were obtained by mixing noble‐metal NPs with as‐prepared CNT@SnO₂ coaxial nanocables by means of a self‐assembly strategy. With the amino group terminated, the CNT@SnO₂ coaxial nanocable can readily adsorb the as‐prepared noble‐metal NPs (Au, Ag, Au? Pt, and Au? Pd NPs). The presence of an amino group at the surface of SnO₂ was proved by use of X‐ray photoelectron spectroscopy (XPS). In addition, H₂O₂ sensing by amperometric methods could serve as detection models for investigating the electrocatalytic ability of as‐prepared hybrid materials. It was found that wide linear ranges and low detection limits were obtained by using the enzyme‐free CNT@SnO₂@Au? Pt modified electrode, which indicated the potential utilizations of the hybrid based on CNT@SnO₂ for electrochemical sensing.     

A Hexagonal Covalent Porphyrin Framework as an Efficient Support for Gold Nanoparticles toward Catalytic Reduction of 4‐Nitrophenol

A hexagonal porphyrin‐based porous organic polymer, namely, CPF‐1, was constructed by 3+2 ketoenamine condensation of the C₂‐symmetric porphyrin diamine 5,15‐bis(4‐aminophenyl)‐10,20‐diphenylporphyrin and 1,3,5‐triformylphloroglucinol. This material exhibits permanent porosity and excellent thermal and chemical stability. CPF‐1 can be employed as a superior supporting substrate to immobilize Au nanoparticles (NPs) as a result of the strong interactions between Au NPs and the CPF support. An Au@CPF‐1 hybrid was synthesized by an interfacial solution infiltration method with NaBH₄ as reducing agent. Au NPs (5 nm) grew on CPF‐1 and were distributed without aggregation. Moreover, Au@CPF‐1 exhibits superior catalytic activity compared to many other reported Au‐based catalysts for the reduction of 4‐nitrophenol in the presence of NaBH₄. In addition, Au@CPF‐1 has excellent stability and recyclability, and it can be reused for three successive reaction cycles without loss of activity. The dense distribution of phenyl rings on the channel walls of the CPF support can reasonably be regarded as the active sites that adsorb the 4‐nitrophenol molecule through hydrogen‐bonding and C?H ??? π interactions, as was confirmed by the X‐ray structure of model compound DAPP‐Benz.     

Highly Water‐Dispersible Surface‐Modified Gd2O3 Nanoparticles for Potential Dual‐Modal Bioimaging

Water‐dispersible and luminescent gadolinium oxide (GO) nanoparticles (NPs) were designed and synthesized for potential dual‐modal biological imaging. They were obtained by capping gadolinium oxide nanoparticles with a fluorescent glycol‐based conjugated carboxylate (H L ). The obtained nanoparticles (GO‐ L ) show long‐term colloidal stability and intense blue fluorescence. In addition, L can sensitize the luminescence of europium(III) through the so‐called antenna effect. Thus, to extend the spectral ranges of emission, europium was introduced into L‐ modified gadolinium oxide nanoparticles. The obtained Eu^III‐doped particles (Eu:GO‐ L ) can provide visible red emission, which is more intensive than that without L capping. The average diameter of the monodisperse modified oxide cores is about 4 nm. The average hydrodynamic diameter of the L ‐modified nanoparticles was estimated to be about 13 nm. The nanoparticles show effective longitudinal water proton relaxivity. The relaxivity values obtained for GO‐ L and Eu:GO‐ L were r₁=6.4 and 6.3 s^?1 mM ^?1 with r₂/r₁ ratios close to unity at 1.4 T. Longitudinal proton relaxivities of these nanoparticles are higher than those of positive contrast agents based on gadolinium complexes such as Gd‐DOTA, which are commonly used for clinical magnetic resonance imaging. Moreover, these particles are suitable for cellular imaging and show good biocompatibility.     

Polyethylenimine‐assisted Synthesis of Au Nanoparticles for Efficient Syngas Production

The ability to capture, store, and use CO₂ is important for remediating greenhouse‐gas emissions and combatting global warming. Herein, Au nanoparticles (Au‐NPs) are synthesized for effective electrochemical CO₂ reduction and syngas production, using polyethylenimine (PEI) as a ligand molecule. The PEI‐assisted synthesis provides uniformly sized 3‐nm Au NPs, whereas larger irregularly shaped NPs are formed in the absence of PEI in the synthesis solution. The Au‐NPs synthesized with PEI (PEI?Au/C, average PEI Mw=2000) exhibit improved CO₂ reduction activities compared to Au‐NPs formed in the absence of PEI (bare Au NPs/C). PEI?Au/C displays a 34 % higher activity toward CO₂ reduction than bare Au NPs/C; for example, PEI?Au/C exhibits a CO partial current density (j_CO) of 28.6 mA cm^?2 at ?1.13 V_RHE, while the value for bare Au NPs/C is 21.7 mA cm^?2; the enhanced j_CO is mainly due to the larger surface area of PEI?Au/C. Furthermore, the PEI?Au/C electrode exhibits stable performance over 64 h, with an hourly current degradation rate of 0.25 %. The developed PEI?Au/C is employed in a CO₂‐reduction device coupled with an IrO₂ water‐oxidation catalyst and a proton‐conducting perfluorinated membrane to form a PEI?Au/C|Nafion|IrO₂ membrane‐electrode assembly. The device using PEI?Au/C as the CO₂‐reduction catalyst exhibits a j_CO of 4.47 mA/cm² at 2.0 V_cell. Importantly, the resulted PEI?Au/C is appropriate for efficient syngas production with a CO ratio of around 30–50 %.     

Polymeric Carbon Nitride/Mesoporous Silica Composites as Catalyst Support for Au and Pt Nanoparticles

Small and homogeneously dispersed Au and Pt nanoparticles (NPs) were prepared on polymeric carbon nitride (CN_x)/mesoporous silica (SBA‐15) composites, which were synthesized by thermal polycondensation of dicyandiamide‐impregnated preformed SBA‐15. By changing the condensation temperature, the degree of condensation and the loading of CN_x can be controlled to give adjustable particle sizes of the Pt and Au NPs subsequently formed on the composites. In contrast to the pure SBA‐15 support, coating of SBA‐15 with polymeric CN_x resulted in much smaller and better‐dispersed metal NPs. Furthermore, under catalytic conditions the CN_x coating helps to stabilize the metal NPs. However, metal NPs on CN_x/SBA‐15 can show very different catalytic behaviors in, for example, the CO oxidation reaction. Whereas the Pt NPs already show full CO conversion at 160 °C, the catalytic activity of Au NPs seems to be inhibited by the CN_x support.     

Intercalation Study of Low‐Molecular‐Weight Hyperbranched Polyethyleneimine into Graphite Oxide

We report for the first time the intercalation of low‐molecular‐weight hyperbranched polyethyleneimine (PEI) into graphite oxide (GO) for the facile, bulk synthesis of novel graphene‐based hybrid (GO‐PEI) materials exhibiting tailored interlayer galleries. The size of the intercalant as well as the loading in GO were systematically investigated to determine their contribution to the basal spacing of the resulting materials. Powder X‐ray diffraction measurements demonstrated the generation of constrained hybrid systems along the c axis that exhibit considerably increased interlayer distances compared with the starting, pristine GO. The results of X‐ray photoelectron and FTIR studies are consistent with a “grafting‐to” process of the intercalated PEI with the oxygen functional groups present along the GO framework. Furthermore, it was found that a great number of the nitrogen‐containing groups in PEI still remain available within the newly formed, confined micro‐environment of intercalated GO galleries. The increased surface area of the GO‐PEI hybrids in conjunction with the remaining available active groups of intercalated PEI render the synthesised hybrids very attractive candidates as nanostructured adsorbents.     

Podophyllotoxin extraction from Linum usitatissimum plant and its anticancer activity against HT‐29, A‐549 and MDA‐MB‐231 cell lines with and without the presence of gold nanoparticles

In recent years, gold nanoparticles (Au‐NPs) have been taken into consideration in nanomedicine due to their excellent biocompatibility, chemical stability and promising optical properties. In this research, podophyllotoxin conjugated with gold nanoparticles (Au‐NPs‐POT) was synthesized and the conjugation of POT with Au‐NPs was confirmed using scanning electron microscopy, mass spectrometry and Fourier transform infrared spectroscopy. The anticancer effects of the product on preclinical models of lung, colon and breast cancers were investigated using MTT test. The analyses showed a direct dose–response relationship. It was found that higher concentrations of POT have more positive effects on the inhibition of cancer cell growth. At POT concentrations of 1, 2.5, 5, 7.5, 10, 15 and 20 ng ml^?1, approximately 50% of the growth of colorectal, lung and breast cancer cell lines was inhibited, while similar results were obtained in the presence of 1, 2, 3, 4 and 5 μg ml^?1 Au‐NPs‐POT. Au‐NPs‐POT exhibited the lowest cytotoxicity due to the presence of POT. The anticancer feature of Au‐NPs‐POT proved the potential to develop better anticancer therapeutics and to open new avenues for treatment of cancers.     

Size of Gold Nanoparticles Driving Selective Amide Synthesis through Aerobic Condensation of Aldehydes and Amines

Metal nanoparticles (NPs) have attracted much attention in many fields due to their intrinsic characteristics. It is generally accepted that smaller NPs (1.5–3 nm) are more active than larger NPs, and reverse cases are very rare. We report here the direct aerobic oxidative amide synthesis from aldehydes and amines catalyzed by polymer‐incarcerated gold (Au) NPs. A unique correlation between imine/amide selectivity and size of NPs was discovered; Au‐NPs of medium size (4.5–11 nm) were found to be optimal. High yields were obtained with a broad range of substrates, including primary amines. Au‐NPs of medium size could be recovered and reused several times without loss of activity, and they showed good activity and selectivity in amide formation from alcohols and amines.