离子印迹法制备对铜离子(Ⅱ)选择性吸附的碳基材料

通过钨离子印记方法,合成了对铜离子有高选择性吸附性能的碳基材料。 在四乙烯五胺(TEPA)、钨酸铵和葡萄糖摩尔比为1:1:5条件下,经水热法合成的碳基吸附材料能有效地吸附铜离子,对铜离子吸附的最佳pH=5。 在Cd²⁺、Co²⁺、Cu²⁺、Ni²⁺和Zn²⁺摩尔浓度相近体系中,离子印记碳基吸附材料对铜离子的吸附率高达97.2%,而对Cd²⁺、Co²⁺、Ni²⁺、Zn²⁺吸附率分别为20.1%、9.63%、20.3%、13.3%,表明这种离子印记碳基吸附材料对Cu²⁺具有非常优异的选择吸附能力。     

Removal of COD,aromaticity and color of a pretreated chemical producing industrial wastewater: a comparison between adsorption,ozonation, and advanced oxidation processes

A wide range of products are produced in the chemical producing industry such as textile dyes, chemicals, printing dyes and chemicals, paper chemicals, electrostatic powder dyes, and optical brighteners. The aim of this study is to investigate the treatability of chemical oxygen demand (COD), aromaticity, and color in the wastewater of this sector, where highly complex chemicals are used. Most of the studies in the literature are related to the treatment of synthetically prepared dyed wastewater. This study is important as it is carried out with real wastewater and gives results of many treatment methods. In the study, COD, UV-vis absorbance, and color values were attempted to be removed from the wastewater of a chemical producing industry that was pretreated by coagulation-flocculation. The COD value of the pretreated wastewater discharged to the central treatment system was restricted as 1000 mg/L. Pretreated wastewater characterization is as follows: COD: 2117 mg/L, UV-vis absorbance values at; 254 nm: 9.91, 280 nm: 8.65, 341 nm: 12.77, 436 nm: 5.01, 525 nm: 2.24, and 620 nm: 1.59. In the study, adsorption, ozonation, and advanced oxidation processes (Fenton and persulfate oxidation) were used to remove COD and UV-vis absorbance values (aromaticity, organics, and color). The method by which the best removal efficiency was obtained for all parameters was the adsorption process using powdered activated carbon (PAC). The equilibrium PAC dose was found as 6 g/L. At this adsorbent dose, the removal efficiencies of UV-vis absorbance values were all around 99% and the efficiency of COD removal was 77%. The Langmuir isotherm constants were found to be q_max= 30.4 mg/g and K_L = 487.9 (L/mg). The COD concentration at this adsorbent dose was 486 mg/L and wastewater was suitable for discharge to the central wastewater treatment plant in that region.     

Preparation and application of a novel orotic acid chelating resin for removal of Cu(Ⅱ) in aqueous solutions

A novel chelating resin OABA,capable of removing Cu(Ⅱ) from aqueous solution,was synthesized via the reaction of macroporous chloromethylated PS-DVB copolymer beads with orotic acid.The elemental analysis(EA),Fourier transform infrared spectroscopy(FT-IR),and scanning electron microscopy microscope-energy dispersive X-ray spectroscopy(SEM-EDS) were used in the characterization of the synthesized chelating resin.Multiple,static batch adsorption experiments were conducted at different initial concentrations and temperatures.OABA showed good adsorption capacity for Cu(Ⅱ) and the equilibrium data could be well matched with the Freundlich isotherm model.Coexisting sodium chloride and calcium chloride in solutions favored the Cu(Ⅱ) adsorption.Moreover,the desorption process of Cu(Ⅱ) was tested and over 90%regeneration efficiency for the spent OABA was achieved at ammonia concentrations ranging from 1.0%to 2.0%.The results suggested that OABA would be a potential alternative adsorbent for Cu(Ⅱ),even with other heavy metal ion treatments of wastewater.     

Solar light assisted degradation of dyes and adsorption of heavy metal ions from water by CuO–ZnO tetrapodal hybrid nanocomposite

We report a facile and economic hydrothermal process for multifunctionally engineered copper oxide/zinc oxide-tetrapods (CuO/ZnO-T) nanocomposite for wastewater treatment. The resultant CuO/ZnO-T nanocomposite possesses high porosity, large surface area, and low band gap. All these properties are advantageous for photocatalyst and adsorbent for dyes and heavy metal ions removal. The morphology of synthesized nanocomposite was characterized using X-ray diffraction, scanning electron microscopy, Brunauer–Emmett–Teller, Fourier-transform infrared spectroscopy, and UV–Visible absorption spectroscopy. The results confirmed the attachment of CuO on the ZnO-T surface, forming a hybrid nanocomposite. The concentration of heavy metal ions was monitored using the atomic absorption spectroscopy technique. The synthesized CuO/ZnO-T nanocomposite was investigated for the decontamination of anionic and cationic dyes, Reactive yellow-145 (RY-145) and Basic violet-3 (BV-3) and heavy metal ions (Chromium (VI) and Lead (II)). The CuO/ZnO-T nanocomposite exhibited superior photocatalytic efficiency (80% RY-145 dye removal and 86% BV-3 dye removal) and adsorption capacity (99% Chromium (VI) removal and 97% Lead (II) removal) as compared to pristine ZnO-T. The mechanism for the reduction of dyes and heavy metal ions was discussed by different kinetics and isotherm models. The current study inferred that CuO/ZnO-T nanocomposite is a potential candidate as a proficient photocatalyst/adsorbent for the removal of various wastewater contaminants.     

Preparation of new spongy adsorbent for removal of EDTA-Cu(Ⅱ) and EDTA-Ni(Ⅱ) from water

A new spongy adsorbent (PU-DTC) was prepared with a polyurethane (PU) adsorbent for removal of EDTA-Cu(Ⅱ) and EDTA-Ni(Ⅱ) from water. This new spongy adsorbent was characterized by using SEM and 13C NMR and FT-IR spectroscopy. Adsorption kinetic curve indicated that this new spongy adsorbent could quickly remove EDTA-Cu(Ⅱ) and EDTA-Ni(Ⅱ) from water, and adsorption isotherm also indicated that PU-DTC had high equilibrium adsorption capacity for EDTA-Cu(Ⅱ) and EDTA-Ni(Ⅱ).     

Liquid-phase adsorption: Characterization and use of activated carbon prepared from diosgenin production residue

The adsorption behavior of activated carbon (AC) prepared from the residue of diosgenin by-product was characterized. The adsorption capacities of AC such as iodine, phenol and methylene blue (MB) are 933.28, 145.38 and 165 mg/g, respectively. The results of MP analysis and BJH method show AC has developed micropore and mesopore volumes, which are 0.1621 and 0.2623 cm³/g respectively, with the mean pore diameter of 1.49 nm. Comparison of the liquid phase adsorption capacities of AC to the standard activated carbon (SAC) and the commercial activated carbon (CAC) for wastewater treatment showed AC was superior to SAC and CAC. Experiments on phenol and MB adsorption and COD and chroma removal from diosgenin wastewater were carried out under different conditions of contact time, temperature, concentration, adsorbent dose and pH. The removal of COD and chroma of 10-multiple wastewater is 92.46 mg/g and 88 %, respectively. Adsorption parameters for the Langmuir and Freundlich isotherm models were determined. At lower temperatures, the data for phenol and COD fitted Freundlich model better than Langmuir model and vise versa for MB and chroma. Adsorption followed second-order kinetics. The study proves that AC prepared from the residue of diosgenin by-product can be used as adsorbent for the treatment of diosogenin wastewater as a cost-effective approach of resource recycle of Discorea zingiberensis C.H. Wright.     

Efficient removal of Cr(III)-carboxyl complex from neutral and high-salinity wastewater by nitrogen doped biomass-based composites

Heavy metals usually exist stably as the species of organic complexes in high-salinity wastewater. Therefore, their effective removal is challenging, especially when the initial pH is neutral. Herein, a novel nitrogen doped biomass-based composite (N-CMCS) was synthesized to remove the complexed heavy metal of Cr(III)-carboxyl. The maximum adsorption capacity of Cr(III)-Citrate (Cr-Cit) by N-CMCS under neutral pH (7.0) and high-salinity (200 mmol/L NaCl) condition was up to 2.50 mmol/g. And the removal performance remained stable after 6 times of regeneration. Combined with species and characterizations analysis, electrostatic attraction and hydrogen bonding were the main mechanisms for N-CMCS to remove Cr(III)-carboxyl complexes. Dynamic adsorption indicated N-CMCS column could treat about 1300 BV simulated wastewater and 350 BV actual wastewater with the concentration of effluent lower than 1.0 mg/L. Furthermore, N-CMCS could remove a variety of complexed heavy metal ions under neutral pH, indicating the great potential in practical application.     

One-pot synthesis of a novel magnetic activated carbon/clay composite for removal of heavy metals from aqueous solution

Abstract

In the present work, a novel composite consisting of magnetite, activated carbon from spent coffee grounds and natural clay (MACCC) was prepared by a one-pot synthesis method via a simultaneous activation and magnetization processes. Various techniques (XRD, FTIR, SEM, TEM, EDX, BET) were utilized to characterize the synthesized composite before utilizing it as an adsorbent for removal of Cu(II), Ni(II) and Pb(II) ions from aqueous solutions. Conditions for removal of heavy metals were thoroughly optimized as 25?°C, pH of 5.5, adsorbent dosage of 2?g L^?1, and a contact time of 60?min. Three models of pseudo first-, second-order and intraparticle diffusion as well as three models of Langmuir, Freundlich, and Temkin were used to analyze kinetics and isotherms of the adsorption process. Thermodynamics was discussed completely. Regeneration and recyclability of the adsorbent were also evaluated. Based on the analysis of experimental results, a possible adsorption mechanism of heavy metals onto the synthesized composite was proposed. The maximum capacities caculated from Langmuir model followed the order of Pb(II) > Cu(II) > Ni(II) as 143.56, 96.16 and 84.86?mg·g^?1, respectively. The overall results indicated that MACCC is a potential adsorbent for removal of toxic Pb(II), Cu(II) and Ni(II) ions from wastewater due to simple preparation, high removal efficiency and good recyclability.     

Itaconic copolymer modified loess for high-efficiently removing copper ions from wastewater

Using Loess of clay (LC) which is low-cost, highly hydrophilic and small granule materials, biocompatible itaconic acid (IA), 2-hydroxyethyl methacrylate (HEMA) and N-vinyl-2-pyrrolidone (NVP) as functional monomers, a novel biocompatible polymer composite adsorbent (LC/PIHN) was prepared by in-situ copolymerization. It was applied to remove copper ions from wastewater, and the mechanism of adsorption was investigated. It showed that the Cu(II) removal was more than 99.8% at room temperature. The adsorption kinetics and isotherms of LC/PIHN fit the pseudo-second-order model and the Freundlich model, respectively. In summary, LC/PIHN is a kind of biocompatible, low-cost and excellent polymer composite adsorbent for removing heavy metal ions from wastewater.     

大孔吸附树脂处理含磺胺废水的研究

利用大孔吸附树脂处理含磺胺废水。实验表明，DRHⅢ树脂对磺胺具有良好的吸附－解吸效果。原废水中磺胺浓度约为17.2g/L,COD约为13750mg/L，经树脂吸附处理后，废水中COD去除率约86％，磺胺的吸附率88．2％，树脂的解吸率为97．5％，磺胺的回收率约86．0％，其纯度达99．8％。在废水有效处理的同时实现了废物资源化，具有良好的环境效益和较高的经济效益。     

Preparation and characterization of L-glutamic acid-functionalized graphene oxide for adsorption of Pb(II)

An efficient adsorbent (L-Glu/GO) was successfully synthesized by the reaction between L-glutamic acid (L-Glu) and graphene oxide (GO). The structure and morphology of this adsorbent were characterized by FTIR, SEM, XRD, and TGA. The SEM result indicated that the adsorbent was a nanomaterial with a size of about 50–400 nm. The adsorption experiments of various heavy ions on L-Glu/GO demonstrated that the adsorption performance of Pb(II) was better than others. Various variables affecting the adsorption of L-Glu/GO for Pb(II) were systematically explored. The experimental results indicated that the maximum adsorption capacity and equilibrium time of Pb(II) on L-Glu/GO were 513.4 mg g^?1 and 40 minute, respectively. The sorption kinetics and isotherm fitted well with the pseudo-second-order model and Langmuir model, respectively. The sorption mainly was a chemical process. Thermodynamic studies revealed that the adsorption was a spontaneous and exothermic process. The adsorbent could be regenerated with HCl solution. Hence, it was suggested that the L-Glu/GO could be applied in the removal of Pb(II) from wastewaters.     

Enhancement of Cd2+ removal on CuMgAl-layered double hydroxide/montmorillonite nanocomposite: Kinetic,isotherm, and thermodynamic studies

In recent decades, great progress has been made in the application of adsorption processes to mitigate water pollution by hazardous metals. However, developing a highly efficient adsorbent is essential if the adsorption process is to be successfully applied in practical applications. In this study, a CuMgAl-layered double hydroxides/montmorillonite nanocomposite (CuMgAl-LDH/MMt) was prepared, characterized, and then used as a novel adsorbent for adsorption of Cd²⁺ ions from wastewater. The effects of initial pH, adsorbent dosage, agitation speed, particle size, contact time, initial Cd²⁺ concentration, and temperature on the pollutant removal efficiency were analyzed. An isotherm model reading revealed that the results of the experimental work were a good fit with the Freundlich model. The maximum adsorption capacity was reached at 174.87 mg/g under optimal conditions (pH 5, dosage of 0.02 g/l, agitation speed of 150 rpm, and particle size of 87 μm) at 50 ppm after 120 min of adsorption time. Kinetic studies showed that pseudo-second-order models were best fitted to the adsorption data, indicating heterogeneous adsorption of Cd²⁺ ions onto multilayer CuMgAl-LDH/MMt sites, and that the adsorption process is primarily chemical adsorption. Thermodynamic parameters (ΔS^o, ΔH^o, and ΔG^o) demonstrated that Cd²⁺ adsorption onto adsorbent was exothermic and spontaneous. Moreover, the synthesized adsorbent can be recovered after five consecutive cycles with a minimal reduction in the adsorption ability of 29.56 %. The study showed that specific heavy metals can be removed from aqueous solution by a newly prepared adsorbent due to its excellent morphology, high stability under a wide range of conditions, recyclability, and high adsorption capacity.     

Preparation and characterization of magnetic bioadsorbent for adsorption of Cd(II) ions

A facile magnetic chitosan composite used for heavy metal ions removal was prepared. The adsorbents with large specific area and rich carboxyl groups exhibited good removal of Cd(II) ions and could be easily separated with magnetic separation. The adsorption capacity of Cd(II) was 48 ​mg ​g⁻¹ and the removal efficiency reached 86.7% after five cycles. Thus, the prepared magnetic chitosan composite could act as a potential adsorbent for Cd(II) ions removal.     

ADSORPTION AND DESORPTION OF DSD ACID MANUFACTURING WASTEWATER ON MACROPOROUS RESIN

4,4‘-diaminostilbene-2,2‘-disulfonic acid (DSD acid) manufacturing wastewater was treated by a macroporous resin in a fixed-bed column.The results showed that this method was suitable for removal of chemical oxygen demands(COD) and color,About 91% COD and 99.5% color removal were obtained under the optimum adsorption conditions.i.e.temperature 20℃,flow rate lbed volume/hour(BV/hr)and pH1-2.The resin was efficiently regenerated with aqueous sodium hydroxide and water.Furthermore,65.5% of 4,4‘-dinitrostilbene-2,2‘-disulfonic acid(DNS) could be recovered from wastewater for possible recycling to the manufactureing process.The adsorption capacity of resin remained constant during the repetition process of adsorption and desorption.     

活性炭吸附法处理苯乙酸工艺废水中甲苯的模拟研究

Active carbon has been widely used to treat wastewater.In this paper active carb on adsorbent is used to treat methylbenzene resulting from the production of phenylacetic acid.Our experiment indicates that acidity has no effect on adsorb ability.At temperature 22℃ and flow rate 1Bv/h,adsorption efficiency of methyl benzen is 94.2% and erasing rate of CODCr reaches 94.9%.Alkaline-alcohol solution is employed as an eluent to regenerate active carbon.After regeneratio n,adsorption efficiency of methylbenzene is 86.4% and the erasing rate of COD Cr is 87.3%.     

Fast Removal and Recovery of Methylene Blue by Activated Carbon Modified with Magnetic Iron Oxide Nanoparticles

A magnetic adsorbent was synthesized by modification of activated carbons with magnetic iron oxide nanoparticles (AC‐MIONs). The preparation method is fast and could be carried out in an ordinary condition. The AC‐MIONs were used as quite efficient adsorbents for separation of methylene blue (MB) from aqueous solution in a batch process. The effect of different parameters such as pH, temperature, electrolyte concentration, contact time and interfering ions on the removal of MB were studied. The adsorption data were analyzed by Langmuir and Freundlich isotherm models and a maximum adsorption amount of 47.62 mg g^‐1 and a langmuir adsorption equilibrium constant of 3.0 L mg^‐1 were obtained. The obtained results revealed that AC‐MIONs were effective adsorbents for fast removal of MB from different aqueous solutions. This adsorbent was successfully used for removal of MB from Karoon River water.     

在多孔有机聚合物中构筑广谱性重金属离子吸附活性位

以三维刚性结构的三蝶烯为单体, 通过简单的Friedel-Crafts烷基化反应制备得到高比表面积的三蝶烯基多孔有机聚合物(TPOP), 在TPOP中接枝乙二胺和氯乙酸钠, 构建了广谱重金属离子吸附剂(TPOP-CH₂EDTA). 获得的TPOP-CH₂EDTA具有微孔/介孔结构, 其微孔尺寸为1.6 nm, BET比表面积为634 m²/g, 利于重金属离子传递和配位作用的强化. TPOP-CH₂EDTA对重金属离子具有吸附广谱性, 其对Ag(Ⅰ), Cu(Ⅱ), Ni(Ⅱ), Zn(Ⅱ), Co(Ⅱ), Sn(Ⅳ), Pb(Ⅱ), Cd(Ⅱ), Fe(Ⅲ)和Cr(Ⅲ)等10种重金属离子的去除率均高于98%. 以Pb(Ⅱ)为典型的重金属污染物, 通过Langmuir模型计算得到Pb(Ⅱ)的最大吸附容量高达184.5 mg/g; 具有拟二级吸附动力学特征, 吸附速率快, 动力学常数k₂为0.0173 g·mg^?1·min^?1; 经过5次循环使用后, Pb(Ⅱ)的去除效率仍高达95.8%. TPOP-CH₂EDTA对混合溶液中Pb(Ⅱ)和Cu(Ⅱ)的去除率均高于99%, 且对含有大量无机盐[如Ca(Ⅱ), Mg(Ⅱ), K(Ⅰ)和Na(Ⅰ)离子]和有机化合物的复杂真实水体系, Pb(Ⅱ)和Cu(Ⅱ)的去除效率仍高于90%. 因此, 通过调控多孔有机聚合物微观结构(如比表面积、 孔径和吸附位点密度)而构筑的广谱性重金属吸附材料, 为协同去除复杂水系统中混合重金属离子提供了方案.     

Magnetically separated and N,S co-doped mesoporous carbon microspheres for the removal of mercury ions

Magnetically separated and N, S co-doped mesoporous carbon microspheres (N/S-MCMs/Fe₃O₄) are fabricated by encapsulating SiO₂ nanoparticles within N, S-containing polymer microspheres which were prepared using resorcinol/formaldehyde as the carbon source and cysteine as the nitrogen and sulfur co-precursors, followed by the carbonization process, silica template removal, and the introduction of Fe₃O₄ into the carbon mesopores. N/S-MCMs/Fe₃O₄ exhibits an enhanced Hg²⁺ adsorption capacity of 74.5 mg/g, and the adsorbent can be conveniently and rapidly separated from wastewater using an externalmagnetic field. This study opens up new opportunities to synthesize welldeveloped, carbon-based materials as an adsorbent for potential applications in the removal of mercury ions from wastewater.     

Industrial indigo dyeing wastewater purification: Effective COD removal with peroxi-AC electrocoagulation system

Direct current (DC) electrocoagulation has obvious decolorization effect on indigo dyeing wastewater produced in actual production, while the removal rate of chemical oxygen demand (COD) was less than 40%, accompanied by serious electrode corrosion and high energy consumption. In order to enhance the COD removal rate, reduce the electrode loss and power consumption, a peroxi-alternating current (AC) electrocoagulation (EC) system was constructed. With COD as the main evaluation index, the effects of power type, electrode combination and process parameters on COD removal rate and decolorization rate were focused on and explored, as well as revealing the degradation mechanism of COD. The results showed that AC electrocoagulation enhanced the floc adsorption capacity by improving the floc structure, and the COD removal rate after treatment was 51.19%. The coupled system of peroxi-AC electrocoagulation further removed sulfite and residual dyes in the wastewater, and the COD removal and decolorization rate of the treated wastewater reached 78.09% and 98.47%, respectively. In addition, the specific energy consumption analysis of COD removal showed that the coupled system was far less energetic than the DC electrocoagulation process, with only 30% of its energy consumption. The uniform corrosion of the electrode under the action of AC weakened the passivation, which reduced the electrode loss and power consumption by 22.73% and 43.75%, respectively. Results from the present work indicated that the peroxi-AC EC system could be an effective method for reducing the concentration of COD in indigo dyeing wastewater.     

吸附树脂和络合树脂联合处理对硝基苯乙酮生产废水的研究

本文采用南京大学研制的AM－1型吸附树脂和ND－900型络合树脂联合处理对硝基苯乙酮生产废水，系统地研究了流速、温度、废水的pH值等因素对树脂吸附性能的影响，以及以NaOH为脱附剂，其流速、浓度、温度等对树脂脱附性能的影响。当废水的处理量为30BV时，其CODCr总去队达93％，表明树脂吸附性能良好。