Polyion complex (PIC) formation is an attractive method for obtaining molecular assemblies owing to their facile fabrication process in aqueous media, but more insights are required in order to control the higher‐dimensional structures of polypeptide‐based PICs. Herein, the PIC formation behavior of oppositely charged homochiral polypeptides, poly‐l ‐lysine and poly(ethylene glycol)‐b‐poly(l ‐glutamate) (PEG‐PLG), and their secondary structures are carefully studied in water. PIC formation takes place in a polymer concentration‐dependent manner, and clear β‐sheet formation is observed at polymer concentrations ≥0.3 mg mL−1. The results also confirm that multimolecular aggregation is a prerequisite for β‐sheet formation, which indicates that the inner hydrophobic environment of PICs is favorable for β‐sheet formation. Furthermore, the PEG weight fraction, stereoregularity of the polypeptide, and ionic strength of the solutions are found to be key factors for generating a secondary structure, presumably because these factors can contribute to the tuning of the inner environment of PICs. This method of producing water‐soluble nanoassemblies from oppositely charged polypeptides may expedite self‐assembly studies in biological systems and be incorporated into various molecular systems to exploit protein‐mimicking features.
Three‐ and four‐arm star shaped polymers, as well as diblock copolymers, are synthesized via acyclic diene metathesis (ADMET) polymerization. This is accomplished by using an asymmetric α,ω‐diene containing a terminal double bond and an acrylate, which is polymerized in the presence of multifunctional acrylates as selective and irreversible chain transfer agents using Hoveyda‐Grubbs second generation catalyst. High cross‐metathesis selectivities are achieved at low temperatures enabling good control over molecular weights. Furthermore, additional polyethyleneglycol (PEG) blocks are attached to these polymers via Heck coupling of the acrylate end‐groups of these polymers with aryl iodide functionalized PEG, obtaining three‐ and four‐arm star shaped di‐ and triblock copolymers with molecular weights up to 31 kDa.
The Mitsunobu reaction can be efficiently used for the transformation of poly(ethylene glycol) (PEG) terminal OH group(s) into a variety of functions. In comparison to more classical approaches of PEG functionalization, the main advantage of the Mitsunobu reaction attains to the fact that in one step, with no detrimental effect on PEG integrity (e.g., chain cleavage). Here, its quantitative conversion is demonstrated into derivatives that, either directly or after deprotection, are amenable to (bio)conjugation reactions: azides (Huisgen cycloaddition), aldehydes, primary amines (Schiff base formation and reduction), thiols, and N‐oxymaleimide (Michael‐type addition). Therefore this reaction is proposed as a general tool for the preparation of functionalities for the purpose of PEGylation, and more generally for (bio)conjugation purposes.
Using the third‐generation Grubbs catalyst, the living ring‐opening metathesis polymerization of ferrocene/cobalticenium copolymers is conducted with theoretical numbers of 25 monomer units for each block, and their redox and electrochemical properties allow using the Bard–Anson electrochemical method to determine the number of metallocenyl units in each block.
We present a method to produce anti‐fouling reverse osmosis (RO) membranes that maintains the process and scalability of current RO membrane manufacturing. Utilizing perfluorophenyl azide (PFPA) photochemistry, commercial reverse osmosis membranes were dipped into an aqueous solution containing PFPA‐terminated poly(ethyleneglycol) species and then exposed to ultraviolet light under ambient conditions, a process that can easily be adapted to a roll‐to‐roll process. Successful covalent modification of commercial reverse osmosis membranes was confirmed with attenuated total reflectance infrared spectroscopy and contact angle measurements. By employing X‐ray photoelectron spectroscopy, it was determined that PFPAs undergo UV‐generated nitrene addition and bind to the membrane through an aziridine linkage. After modification with the PFPA‐PEG derivatives, the reverse osmosis membranes exhibit high fouling‐resistance.
An alkyne‐functionalized ruthenium(II) bis‐terpyridine complex is directly copolymerized with phenylacetylene by alkyne polymerization. The polymer is characterized by size‐exclusion chromatography (SEC), 1H NMR spectroscopy, cyclic voltammetry (CV) measurements, and thermal analysis. The photophysical properties of the polymer are studied by UV–vis absorption spectroscopy. In addition, spectro‐electrochemical measurements are carried out. Time‐resolved luminescence lifetime decay curves show an enhanced lifetime of the metal complex attached to the conjugated polymer backbone compared with the Ru(tpy)22+ model complex.
A double hydrophilic block copolymer, poly(ethylene glycol)‐poly(3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate) (PEG‐SB), is synthesized by reversible addition‐fragmentation transfer (RAFT) polymerization using PEG methyl ether (4‐cyano‐4‐pentanoate dodecyl trithiocarbonate) as a chain transfer agent. PEG‐SB forms multi‐layered microspheres with dipole‐dipole interactions of the SB side chains as the driving force. The PEG‐SB polymers show an upper critical solution temperature (UCST) and the UCST is controllable by the polymerization degree. The PEG‐SB microspheres are dissociated above the UCST and then monodispersed microspheres (∼1 μm) are obtained when the solution temperature is decreased below the UCST again. The disassociation/association of the microspheres is also controllable using the concentration of NaCl. These multi‐responsive microspheres could be a powerful tool in the field of nano‐biotechnology.
A pH‐responsive core cross‐linked star (CCS) polymer containing poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) arms was used as an interfacial stabilizer for emulsions containing toluene (80 v%) and water (20 v%). In the pH range of 12.1‐9.3, ordinary water‐in‐oil emulsions were formed. Intermediate multiple emulsions of oil‐in‐water‐in‐oil and water‐in‐oil‐in‐water were formed at pH 8.6 and 7.5, respectively. Further lowering the pH resulted in the formation of gelled high internal phase emulsions of oil‐in‐water type in the pH range of 6.4‐0.6. The emulsion behavior was correlated with interfacial tension, conductivity and configuration of the CCS polymer at different pH.
The synthesis of tetracene‐ and pentacene‐annulated norbornadienes, formed through the Diels–Alder reaction of a dehydroacene with cyclopentadiene is reported. Ring‐opening metathesis polymerization (ROMP) leads to polymers that are investigated with respect to their physical, optical, and electronic properties by gel permeation chromatography (GPC), UV–vis spectroscopy, and cyclic voltammetry. The pentacene‐containing polymer P1 is successfully integrated into an organic field‐effect transistor (OFET); the tetracene‐containing polymer P2 is integrated into an organic light‐emitting diode (OLED).
Polysiloxane‐modified tetraphenylethene (PTPESi) is successfully synthesized by attaching tetraphenylethene (TPE) units onto methylvinyldiethoxylsiloxane and subsequent polycondensation. Introducing polysiloxane into TPE has minimal effect on the photophysical properties and aggregation‐induced emission behavior of TPE. The highest occupied and lowest unoccupied molecular orbital (HOMO and LUMO) energy levels of PTPESi are located mainly on the tetraphenylethene moieties. The fluorescence intensity and the half width of the emission peak of PTPESi before and after annealing at 120 °C for 12 h are nearly the same, indicating high thermal stability and morphological stability. In addition, use of PTPESi film as a sensor toward the vapor‐phase detection of explosives is also studied and it displays quite high fluorescence quenching efficiency and good reversibility.
A new and easy method of stimuli‐triggered growth and removal of a bioreducible nanoshell on nanoparticles is reported. The results show that pH or temperature could induce the aggregation of disulfide‐contained branched polymers at the surface of nanoparticles; subsequently, the aggregated polymers could undergo intermolecular disulfide exchange to cross‐link the aggregated polymers, forming a bioreducible polymer shell around nanoparticles. When these nanoparticles with a polymer shell are treated with glutathione (GSH) or d,l ‐dithiothreitol (DTT), the polymer shell could be easily removed from the nanoparticles. The potential application of this method is demonstrated by easily growing and removing a bioreducible shell from liposomes, and improvement of in vivo gene transfection activity of liposomes with a bioreducible PEG shell.
Stratified polymer brushes are fabricated using microcontact printing (μCP) of initiator integrated polydopamine (PDOPBr) on polymer brush surfaces and the following surface initiated atom transfer radical polymerization (SI‐ATRP). It is found that the surface energy, chemically active groups, and the antifouling ability of the polymer brushes affect transfer efficiency and adhesive stability of the polydopamine film. The stickiness of the PDOPBr pattern on polymer brush surfaces is stable enough to perform continuous μCP and SI‐ATRP to prepare stratified polymer brushes with a 3D topography, which have broad applications in cell and protein patterning, biosensors, and hybrid surfaces.
Catalytically active asymmetric membranes have been developed with high loadings of palladium nanoparticles located solely in the membrane's ultrathin skin layer. The manufacturing of these membranes requires polymers with functional groups, which can form insoluble complexes with palladium ions. Three polymers have been synthesized for this purpose and a complexation/nonsolvent induced phase separation followed by a palladium reduction step is carried out to prepare such membranes. Parameters to optimize the skin layer thickness and porosity, the palladium loading in this layer, and the palladium nanoparticles size are determined. The catalytic activity of the membranes is verified with the reduction of a nitro‐compound and with a liquid phase Suzuki–Miyaura coupling reaction. Very low reaction times are observed.
Organic electrochromic materials change color rapidly under applied potential. A butterfly‐shaped compound, 5,5′,‐5″,‐5′″‐(thieno[3,2‐b]thiophene‐2,3,5,6‐tetrayl) tetrakis‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxine) (t‐EDOT‐TT) is synthesized for the first time and polymerized at different potentials via electropolymerization technique. By applying different polymerization potentials, the optical and electrochromic properties of this newly synthesized polymer can be tuned. Owing to the dependence of functional group position in the polymer structure on the redox potential, this polymer can be utilized in very interesting organic optoelectronic applications.
A novel strategy for the incorporation of carbon dioxide into polymers is introduced. For this purpose, the Ugi five‐component condensation (Ugi‐5CC) of an alcohol, CO2, an amine, an aldehyde, and an isocyanide is used to obtain step‐growth monomers. Polymerization via thiol‐ene reaction or polycondensation with diphenyl carbonate gives diversely substituted polyurethanes or alternating polyurethane‐polycarbonates, respectively. Furthermore, the application of 1,12‐diaminododecane and 1,6‐diisocyanohexane as bifunctional components in the Ugi‐5CC directly results in the corresponding polyamide bearing methyl carbamate side chains ( = 19 850 g mol−1). The latter polymer is further converted into the corresponding polyhydantoin in a highly straightforward fashion.
This review describes different synthetic strategies towards sequence‐defined, monodisperse macromolecules, which are built up by iterative approaches and lead to linear non‐natural polymer structures. The review is divided in three parts: solution phase‐, solid phase‐, and fluorous‐ and polymer‐tethered approaches. Moreover, synthesis procedures leading to conjugated and non‐conjugated macromolecules are considered and discussed in the respective sections. A major focus in the evaluation is the applicability of the different approaches in polymer chemistry. In this context, simple procedures for monomer and oligomer synthesis, overall yields, scalability, purity of the oligomers, and the achievable level of control (side‐chains, backbone, stereochemistry) are important benchmarks.
A triple‐sensitive polymer of poly(ethylene glycol)‐iminoboronate nitrobenzyl ethanediol chelate (PEG‐INEC) is efficiently fabricated via the convenient aqueous iminoboronate multi‐component reaction (MCR) of methoxypolyethylene glycol amine (mPEG‐NH2), 2‐formylphenylboronic acid (FPBA), and bis(2‐nitrophenyl) ethanediol (BNPE, a photo‐cleavable nitrobenzyl alcohol derivate). The aqueous MCR synthetic procedure is followed using 1H NMR and turbidity analysis. It is shown that polymer nano‐aggregates of PEG‐INEC in aqueous solution can be dissociated through the stimuli responsive reactions of the hydrophobic iminoboronate nitrobenzyl ethanediol chelates (INECs) when exposed to UV light, acid, and H2O2, respectively. Furthermore, upon the stimulation of combined triggers, the dissociation of polymer nano‐aggregates can be accelerated to different extents, resulting in the synergistic release of encapsulated hydrophobic molecules in water. The proposed facile and general method is quite desirable and of great importance in practical applications like drug and gene delivery.
Here, the preparation of a novel block copolymer consisting of a statistical copolymer N‐(2‐hydroxypropyl) methacrylamide‐s‐N‐(3‐aminopropyl) methacrylamide and a short terminal 3‐guanidinopropyl methacrylamide block is reported. This polymer structure forms neutral but water‐soluble nanosized complexes with siRNA. The siRNA block copolymer complexes are first analyzed using agarose gel electrophoresis and their size is determined with fluorescence correlation spectroscopy. The protective properties of the polymer against RNA degradation are investigated by treating the siRNA block copolymer complexes with RNase V1. Heparin competition assays confirm the efficient release of the cargo in vitro. In addition, the utilization of microscale thermophoresis is demonstrated for the determination of the binding strength between a fluorescently labeled polyanion and a polymer molecule.
In this paper, a novel synthesis of polyethylene glycol (PEG)‐modified polypyrrole (PPy) nanomaterials is demonstrated by combining reversible addition‐fragmentation chain transfer polymerization and oxidative polymerization. Dye molecules with a heat‐labile linker are used as a model drug and covalently anchored onto the PEGlated PPy nanomaterials via “click chemistry.” The strong absorption of such PPy nanomaterials in the near‐infrared region endows the system excellent photothermal effect, which can be used not only as efficient photothermal agents for photothermal therapy but also good controllers of a drug‐release system by retro D–A reaction.
Supramolecular microgel capsules based on polyethylene glycol (PEG) are a promising class of soft particulate scaffolds with tailored properties. An approach to fabricate such particles with exquisite control by droplet‐based microfluidics is presented. Linear PEG precursor polymers that carry bipyridine moieties on both chain termini are gelled by complexation to iron(II) ions. To investigate the biocompatibility of the microgels, living mammalian cells are encapsulated within them. The microgel elasticity is controlled by using PEG precursors of different molecular weights at different concentrations and the influence of these parameters on the cell viabilities, which can be optimized to exceed 90% is studied. Reversion of the supramolecular polymer cross‐linking allows the microcapsules to be degraded at mild conditions with no effect on the viability of the encapsulated and released cells.
